Commit 0eca108b73 (directfb: add host-directfb target
for directfb-csource) had tabs replaced by spaces, causing stuff
to break - Fixed.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
directfb-csource is a code generation tool that may be needed to build
other packages. Add host-directfb target that installs directfb-csource
in the host_dir.
Signed-off-by: Sven Neumann <s.neumann@raumfeld.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
It doesn't compile:
../../src/memory.c: In function '__mp_memquery':
../../src/memory.c:769: error: lvalue required as left operand of assignment
And hasn't seen any updates since it got added in 2006, so it cannot
have many users. People most likely use valgrind nowadays for memory
debugging anyway - Drop it.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
liblockfile.so.1.0 gets installed into /usr/lib, not /lib, so the target
install make target is always considered out-of-date.
Do various cleanups while we're here.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libuuid.so gets installed into /usr/lib, not /lib, so the target
install make target is always considered out-of-date.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The source target was broken until very recently, and it doesn't build
as it tries to use the host compiler for the client stuff, so there
cannot be many users of it.
People should use avahi instead nowadays, so so just remove it instead
of hacking it to work.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fix various breakage in the imagemagick build:
- libWand.* is now called libMagickWand.*
- libMagic.* is now called libMagickCore.*
- References to wrong version numbers in directories
- Libraries missing from clean target
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
We have been passing -q to ./configure when using 'make -s' for
packages using Makefile.autotools.in for some time. Do the same
for packages using autotools, but not using the
Makefile.autotools.in infrastructure, taking care to not do it
for packages with hand written configure scripts.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Positive logic is easier to read and understand than something
like 'if not option=yes then foo else bar'.
Signed-off-by: Michael Roth <mroth@nessie.de>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Depend on dbus being compiled with expat support and not just on expat
being enabled, as you can have expat enabled and still compile dbus
with libxml2 support instead.
While we're at it, only show comment about unforfilled dependencies if
dbus is enabled.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
dbus-glib needs dbus to be compiled with expat support, so prefer that
mode even if libxml2 is also enabled.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Reported by Emmanuel Riou <riou.emmanuel@googlemail.com>.
With the recent change to use $(TOPDIR)/dl as default for $(DL_DIR)
(416323e93), DL_DIR is now a relative path (./dl), which breaks the
mpfr patch handling as it changes dir.
Fix is by using patch-kernel instead of calling patch, which does
the right thing.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Reported by Sven Neumann <s.neumann@raumfeld.com>
Use LIBGLIB2_HOST_BINARY instead of the non-existing $(HOST_GLIB)
variable to refer to the host version of glib-genmarshal.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Upstream openssl doesn't have avr32 support, and we dropped the
avr32 optimization patch some time ago.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
To reflect the new output directory hierachy rename the Makefile variable
TOOL_BUILD_DIR to TOOLCHAIN_DIR.
Signed-off-by: Michael Roth <mroth@nessie.de>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The samba configure scripts detects the presence of fam and avahi
headers in order to decide whether support for fam and/or avahi should
be built into samba. This patch adds the missing dependencies so that
fam and/or avahi are built before samba if they are selected in buildroot.
Signed-off-by: Sven Neumann <s.neumann@raumfeld.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#301
The libsmbclient library is part of the samba package. It can be used
to build applications that access Samba shares without the need to
mount them. Currently the library is explicitly not installed by
buildroot. Here's a patch that adds a config option to install it.
Signed-off-by: Sven Neumann <s.neumann@raumfeld.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The avahi-client library makes use of threads. We need to link the
smbd binary with -pthread if avahi support is enabled. Otherwise the
binary will crash at startup.
Signed-off-by: Sven Neumann <s.neumann@raumfeld.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
If we have set BR2_PACKAGE_PYTHON_PY_ONLY or BR2_PACKAGE_PYTHON_PY_PYC
we want .py files to be left on the target, whatever the value of
BR2_PACKAGE_PYTHON_DEV.
Signed-off-by: Will Newton <will.newton@gmail.com>
libmicrohttpd is a library that allows embedding an HTTP server into
an application with a small code and memory footprint.
Signed-off-by: Will Newton <will.newton@gmail.com>
PKG_CONFIG_PATH adds a path to the pkg-config search path, but this is not
enough when we are building host tools - the host pkg-config default path
is still used, and this will pick up .pc files in the staging_dir tree.
PKG_CONFIG_LIBDIR overrides the pkg-config default path and ensures only
host .pc files are found. This fixes a pango build failure when building
for the host with cairo PNG support enabled.
Signed-off-by: Will Newton <will.newton@gmail.com>
This release of autoconf brings a number of bug fixes, including a change
to the autoreconf script to pass the correct include path parameter to
aclocal.
Signed-off-by: Will Newton <will.newton@gmail.com>
- bumb version to v1.4.5
- add fix for --disable-ipv6 option
(upstream bug: http://bugzilla.netfilter.org/show_bug.cgi?id=608)
Signed-off-by: Olaf Rempel <razzor@kopf-tisch.de>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#477
Peter: minor tweaks:
- sdl_snd -> sdl_sound
- cleaned up help text
- don't transform binary name
- add option to keep playsound/playsound_simple - Off by default
- fix uninstall when BR2_HAVE_DEVFILES isn't enabled
Signed-off-by: Evan Zelkowitz <evan.zelkowitz@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#565
- Bump version from 1.2 to 1.4.12
- Clean up makefile and use Makefile.autotools.in.
Signed-off-by: Will Newton <will.newton@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Udhcp got integrated into busybox a long time ago, and the udhcp package
wasn't even included in package/Config.in, so it couldn't be used.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#617
netkittelnet needs netkitbase, which in term needs RPC support in
toolchain, so adjust Kconfig dependencies to ensure this.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In the output directory, we now have
- build/ where all the packages are built
- images/ where the final kernel and rootfs images are stored
- staging/ the staging directory (containing the development files
and libraries compiled for the target)
- target/ which contains the target root filesystem
- host/ which contains all the host programs
- stamps/ which contains the stamps files
Therefore, the build_ARCH and toolchain_build_ARCH have been
removed. People willing to use the same Buildroot sources to compile
for different architectures are invited to use the O= command line
option for out-of-tree compilation.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The "project" feature was designed to allow to several projects to be
built inside the same Buildroot source tree and allowing the toolchain
and non-configurable packages to be shared between the different
projects on the same architecture. While being interesting in theory,
this feature adds a level of complexity to Buildroot, both from an
user perspective and from a developer perspective, while one of the
main Buildroot strengh is to be simple. Moreover, this feature is only
seldomly used by our users.
From a user-level perspective, this for example allows to remove the
project_build_ARCH directory, which was very confusing. The
autotools-stamps directory is also removed, since these stamps are
back at their normal location.
Description of the changes involved :
* project/, directory removed
* Makefile
- Don't include project/Makefile.in and project/project.mk anymore
- Grab a copy of the contents of project/Makefile.in at the
location it was imported, but remove the definition related to
PROJECT_BUILD_DIR. The TARGET_DIR is now in
$(BUILD_DIR)/target_dir
- Remove the creation/removal of the $(PROJECT_BUILD_DIR) and
$(PROJECT_BUILD_DIR)/autotools-stamps directories
- Don't make world depends on target-host-info. This target was
defined by project/project.mk to customize /etc/issue,
/etc/hostname and create /etc/br-version depending on the
project definitions. We can of course imagine re-adding such a
feature later.
- Replace PROJECT_BUILD_DIR by BUILD_DIR everywhere
- Remove the update, log and lognr.$(PROJECT) target, they were
specific to the project feature.
* package/Makefile.autotools.in
- Replace PROJECT_BUILD_DIR by BUILD_DIR for the location of the
configure cache
- Move the INSTALL_TARGET and HOOK_POST_INSTALL stamps to the same
directory as the other stamps (i.e, in the package directory).
* package/Makefile.in
- Replace PROJECT_BUILD_DIR by BUILD_DIR for the location of the
configure cache
* package/at/at.mk,
package/busybox/busybox.mk,
package/busybox/initramfs.mk,
package/customize/customize.mk,
package/linux-fusion/linux-fusion.mk,
package/ltp-testsuite/ltp-testsuite.mk,
package/nfs-utils/nfs-utils.mk,
target/cpio/cpioroot.mk,
target/cramfs/cramfs.mk,
target/device/Atmel/DataFlashBoot/DataflashBoot.mk,
target/device/Atmel/Makefile.in,
target/device/Atmel/at91bootstrap/at91bootstrap.mk,
target/device/KwikByte/Makefile.in,
target/ext2/ext2root.mk,
target/initramfs/initramfs.mk,
target/iso9660/iso9660.mk,
target/jffs2/jffs2root.mk,
target/linux/Makefile.in,
target/romfs/romfs.mk,
target/squashfs/squashfsroot.mk,
target/tar/tarroot.mk,
target/ubifs/ubifsroot.mk
- Replace PROJECT_BUILD_DIR by BUILD_DIR
* target/device/Config.in
- Do not include project/Config.in anymore
* target/linux/Makefile.in.advanced
- Replace PROJECT_BUILD_DIR by BUILD_DIR
- Store the stamps file in $(STAMP_DIR) instead of
$(PROJECT_BUILD_DIR)/autotools-stamps
* target/u-boot/Makefile.in
- Replace PROJECT_BUILD_DIR by BUILD_DIR
- Remove $(PROJECT) from the U-Boot target binary name
- Remove the insertion in the configuration of the project name as
the hostname
- The u-boot-autoscript target now generates
$(U_BOOT_AUTOSCRIPT).img instead of
$(U_BOOT_AUTOSCRIPT).$(PROJECT)
* toolchain/gcc/gcc-uclibc-3.x.mk
toolchain/gcc/gcc-uclibc-4.x.mk
- Move the stamps files to $(STAMP_DIR)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Closes#587
- bump version to 1.4.4
- iptables-optional-ipv6.patch no longer needed (included in upstream)
- use ipXtables-multi binaries with symlinks to ipXtables, ipXtables-save,
ipXtables-restore instead of 3 distinct binaries
Signed-off-by: Olaf Rempel <razzor@kopf-tisch.de>
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
DiVine is the DirectFB virtual input extension.
Signed-off-by: Sven Neumann <s.neumann@raumfeld.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The variable controlling if coreutils thinks the system has the
rename-with-trailing-slash bug is called
gl_cv_func_rename_trailing_slash_bug and not vb_cv_..
Forcing this off works around a bug in coreutils configure, which
otherwise tries to compile Windows-only workaround code.
Reported-by: Stephen Rodgers <hwstar@rodgers.sdcoxmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#487
* Bump kismet from 2007-10-R1 to 2009-06-R1 (newcore: nicer, more features)
* Migrate to Makefile.autotools.in
* Introduce new options to just install the server, client, drone or
combination
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
A C library will have been built by the toolchain makefiles, so there is no
need for packages to explicitly depend on uclibc.
Signed-off-by: Will Newton <will.newton@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
It turns out that renaming SDL_net to sdl_net (688c388ce7) isn't
such a good idea, as the name is also used for the tarball filename to
download.
Instead go back to use SDL_net again, and simply add an sdl_net alias.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#557
Build with openssl support if that is enabled.
Signed-off-by: Kelvin Cheung <keguang.zhang@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#529.
util-linux needs to link with libintl when locale support is available /
requested in the toolchain, similar to how it is done for avahi.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
We don't have libblkid in BR, so make sure the configure script doesn't
detect it if it is installed on the host.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As suggested by Julien Boibessot <julien.boibessot@free.fr>.
The other SDL extensions use sdl_xx, and not SDL_xx, so rename sdl_net
to match.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
alsa-utils included two ugly patches for ARM and AVR32 to fix build
issues encountered with ncurses. In fact these build issues were
caused by the fact that alsa-utils was using ncurses5-config of the
host instead of the one installed in $(STAGING_DIR).
Therefore, these two patches are removed, and we instead pass
ac_cv_prog_ncurses5_config to the ./configure script.
This commit solves bug #569, reported by Simon Pasch, who also
contributed this fix.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To get the libtool patch to make some effect, an autoreconfiguration
is necessary.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libxslt is currently configured with --with-libxml-include-prefix,
which allows libxslt ./configure to find libxml headers. However, the
build of libxslt fails because it doesn't find the library itself.
Therefore, instead of using --with-libxml-include-prefix, we switch to
the more generic --with-libxml-prefix.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Webkit currently depends on libgtk2, which itself depends on
Cairo. However, the dependency of libgtk2 is only on
BR2_PACKAGE_CAIRO, BR2_PACKAGE_CAIRO_PS and
BR2_PACKAGE_CAIRO_PDF. While this might be enough for libgtk2 to build
and work, Webkit makes direct use of the PNG functionnalities of
Cairo. If this functionnality is not available in Cairo, the Webkit
build complains that cairo_surface_write_to_png_stream() is not
defined.
Therefore, we make sure that WebKit selects BR2_PACKAGE_CAIRO_PNG.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The version of Webkit packaged in Buildroot uses libtool 2.x, for
which our package/buildroot-libtool.patch does not apply. So we
disable this patch. However, on my system, the lack of libtool
modification prevents the final linking to succeed (due to libtool
trying to link target code with host libraries). This will have to be
fixed separatly.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In an attempt to disable the compilation and installation of
documentation of gtk packages, a DISABLE_DOCUMENTATION variable
containing --without-html-dir has been added to
package/Makefile.in. This variable is used by
package/Makefile.autotools.in so that --without-html-dir is in effect
passed to all autotools-based packaging relying on the
Makefile.autotools.in infrastructure.
Unfortunately, --without-html-dir doesn't work. It leads libglib2
./configure script to think that HTML_DIR is "no", which leads to the
installation of the documentation in $(STAGING_DIR)no (yes, with the
"no" suffix at the end). The issue is that --with-html-dir is not an
enable/disable type of option, it's an option that only allows to pass
a PATH for documentation installation.
As we don't want the documentation to be installed in this odd
$(STAGING_DIR)no directory, we simply get rid of this option.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This change adds two new options, BR2_PACKAGE_DIRECTFB_DEBUG
to enable lots of debugging output from DirectFB and
BR2_PACKAGE_DIRECTFB_TRACE to enable support for call traces
in case of a crash.
Signed-off-by: Sven Neumann <s.neumann@raumfeld.com>
Some architectures may need updates to the configure helper scripts
before it is possible to safely configure.
Signed-off-by: Will Newton <will.newton@gmail.com>
Add a new target for libuuid so it can be built without e2fsprogs.
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Recent glibc versions introduced a futimens() function, that gzip
already implemented. So waiting for a proper usage of this function in
gzip, we rename the gzip internal function to gz_futimens().
Patch inspired by
http://lists.pld-linux.org/mailman/pipermail/pld-cvs-commit/Week-of-Mon-20070514/155476.html
Fixes bug #537
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since CC is already passed in TARGET_CONFIGURE_OPTS at ./configure
time, there's no point in overriding it with a wrong value at
compilation time. This breaks external toolchain builds since
CC=$(TARGET_CC) is wrong because it excludes the mandatory --sysroot
option.
Fixes bug #525
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fix the little build systems hacks that no longer applied to the
version of Perl being used. With these fixes in place, microperl
builds and runs properly simple Perl commands on the target.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since the recent update of Kconfig to the Kconfig infrastructure found
in 2.6.30 kernels, make oldconfig was broken because it didn't
generate the .config.cmd file. This is done by a call to the
conf_write_autoconf() function.
Moreover, this process was also broken because the
conf_get_autoconfig_name() function was reading the environment
variable BUILDROOT_AUTOCONF while the main Makefile is passing it as
KCONFIG_AUTOCONFIG. We also remove the fallback on
"$(BR2_DEPENDS_DIR)/config/auto.conf" since we are not able to expand
BR2_DEPENDS_DIR at this point. Therefore, the KCONFIG_AUTOCONFIG
envionment variable *must* be set.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Closes#289
This package is a wireless configuration utility for the linux mac80211
kernel stack.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Tested-By: Will Newton <will.newton@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#437
- Remove a few obsolete patches.
- Add a patch to disable syscall tests unsupported by uClibc.
- Add a patch to fix sched_getaffinity build.
Signed-off-by: Will Newton <will.newton@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#427
- Fix generation of configure script and Makefiles.
- Add dependencies on libsoup and enchant.
- Allow configuration of rendering target (currently X11 or DirectFB).
Signed-off-by: Will Newton <will.newton@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The installation to the target directory was broken for two reasons:
* Due to how the lvm2.mk file was written, for each file listed in
$(LVM2_TARGET_SBINS) and $(LVM2_TARGET_DMSETUP_SBINS), it was
reinstalling all the files listed in those variables. When a target
contains several elements, there's no need to make a loop to handle
each of the elements: the rule will get executed as many times as
they are elements in the target.
* For some odd reason, lvm2 build system installs executable with 555
and libraries with 444. Therefore, once copied to the target
directory, these executables and libraries cannot be
overwritten... for example by a later execution of Buildroot. We
fix this up by changing the permissions of the binaries and
libraries installed by lvm2 to saner values (755 and 644)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Buildroot Makefile to compile pciutils wasn't passing TARGET_LDFLAGS
to pciutils build system. Therefore, at link time, the pciutils build
system was not taking into account the important --sysroot option,
which was breaking the link with external toolchains.
Fixes bug #523.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Closes#247
wide collection of NTFS utilities from http://www.linux-ntfs.org/
[Peter: misc Config.in cleanups/fixes]
Signed-off-by: Olaf Rempel <razzor@kopf-tisch.de>
Tested-By: Will Newton <will.newton@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Coreutils 6.9 was broken with glibc >= 2.6, due to a coreutils
internal function being named like a glibc function. This has been
fixed in more recent coreutils version, by
http://lists.pld-linux.org/mailman/pipermail/pld-cvs-commit/Week-of-Mon-20070514/155466.html.
Therefore, we upgrade coreutils to its latest version, 7.4, which
raised two problems:
* Recent coreutils releases are not anymore available as .bz2
archives, only .xz archives. Since this archive format is not
supported by Buildroot yet, and the corresponding tools are not
widely available yet, we fallback to the bigger .gz format for the
coreutils package.
* The rename bug detection script m4/rename.m4 was broken, leading
coreutils to try to include windows.h and compile some
Windows-specific code. We introduce a patch to fix this, patch
which has been taken from gnulib. We also make sure that this
workaround is nevery compiled in by passing
gl_cv_func_rename_dest_exists_bug=no to the configure script.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
BR2_UCLIBC_PROGRAM_INVOCATION is a toolchain configuration option,
like BR2_INET_IPV6, BR2_INET_RPC, on which some packages
depend. Therefore, it should be handled like BR2_INET_IPV6 and
BR2_INET_RPC in order to work properly with external toolchains.
Since we move it out of toolchain/uClibc/Config.in into
toolchain/Config.in.2, we rename the option to BR2_PROGRAM_INVOCATION
(since BR2_INET_RPC and others don't have UCLIBC in their name).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The update of kconfig and the addition of xconfig support generates
more files in package/config/. Tell git to ignore them.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Closes#491
- Deletion of reject files no longer required as they have gone from
the upstream release.
Signed-off-by: Will Newton <will.newton@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The AUTO_CONFIGURE_OPTS is not used anywhere in the tree. autoconf
based packages should used the Makefile.autotools.in machinery
instead.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The cross-compile fix included in mainline of libXt between 1.0.5 and
1.0.6 is not sufficient. It allows to pass a different compiler for
the host tools, but still uses the TARGET_CFLAGS/TARGET_LDFLAGS to
compile the host tools, which obviously isn't correct.
The new patch allows to use the CFLAGS_FOR_BUILD/LDFLAGS_FOR_BUILD
variables as the CFLAGS/LDFLAGS to build the host tools.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This version bump is required by the bump of xlib_libXt from 1.0.5 to
1.0.6 (1.0.6 requires at least xutil/macros 1.2).
The linuxdoc patch is removed, since it has been merged upstream, at
http://cgit.freedesktop.org/xorg/util/macros/commit/?id=e20c503d24e5ccf03035aa0f6d833d235d2179df
The other patch exposing STAGING_DIR is kept, as it is Buildroot
specific. It has just been updated to resolve conflicts.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Closes#243.
CTorrent is a BitTorrent client implemented in C++
to be lightweight and quick.
This is the enhanced version from
http://www.rahul.net/dholmes/ctorrent/
[Peter: minor kconfig tweaks]
Signed-off-by: Olaf Rempel <razzor@kopf-tisch.de>
Tested-by: Will Newton <will.newton@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#451
Move from old unmaintained dosfstools-2.11 (packaged as mkdosfs) to
now maintained dosfstools-3.0.3.
Allow each binary to be installed independently.
Signed-off-by: Mike Crowe <mac@mcrowe.com>
Tested-by: Will Newton <will.newton@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
