U-boot libfdt fails to compile on CI.
/usr/bin/ld: scripts/dtc/dtc-parser.tab.o:(.bss+0x10): multiple definition of `yylloc'; scripts/dtc/dtc-lexer.lex.o:(.bss+0x0): first defined here
collect2: error: ld returned 1 exit status
https://gitlab.com/buildroot.org/buildroot/-/jobs/2021478208
As this fix has been already upstreamed just bump U-boot package.
Let's also bump Kernel and ATF as the board is properly supported upstream.
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The Linux defconfig both has VT and serial port support, so it makes more
sense to run getty on /dev/console instead of hard coding the serial port.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Select BR2_TARGET_UBOOT_NEEDS_OPENSSL to fix the following build
error:
include/image.h:1178:12: fatal error: openssl/evp.h: No such file or directory
1178 | # include <openssl/evp.h>
| ^~~~~~~~~~~~~~~
Fixes:
- https://gitlab.com/buildroot.org/buildroot/-/jobs/1970083907
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This fixes the compile errors that were present with the previous
kernel version (4.19):
https://gitlab.com/buildroot.org/buildroot/-/jobs/1970084022
Additionally, the defconfig file was refactored: Configuration
values are now grouped logically, thus increasing readability and
maintainability.
Signed-off-by: Danilo Bargen <mail@dbrgn.ch>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The FP setting is not used for aarch64 in buildroot. The FPU options are
set implicit.
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
After update of the U-Boot [1] we were missing dependency on Python3,
and so were seeing failures like in [2]:
------------------------->8--------------------
HOSTLD scripts/dtc/dtc
scripts/dtc/pylibfdt/libfdt_wrap.c:154:11: fatal error: Python.h: No such file or directory
154 | # include <Python.h>
| ^~~~~~~~~~
compilation terminated.
error: command '/usr/bin/gcc' failed with exit code 1
------------------------->8--------------------
So that get fixed with "BR2_TARGET_UBOOT_NEEDS_PYTHON3=y".
And then once we use Python3, we also need OpenSSL, similarly to [3]
and the likes. So do it with "BR2_TARGET_UBOOT_NEEDS_OPENSSL=y".
Hopefully now all starts to build w/o any issues.
And while at it let's add a bit more structure to the config!
[1] https://git.buildroot.net/buildroot/commit/?id=06f10a88f30b73aaea5c0e0888d7ba9d9a6420f3
[2] https://gitlab.com/buildroot.org/buildroot/-/jobs/1946650570
[3] https://git.buildroot.net/buildroot/commit/?id=cf2a7663ccc6089e98e0d6ec39fa8623749c0c24
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit b8aebcfd82 (configs/roseapplypi_defconfig: bump kernel to
5.15.10) adjusted the board to use an ext4 rootfs, but forgot to update the
defconfig to enable ext4 rootfs, breaking the build. Correct that.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump U-Boot to 2022.01 and kernel to 5.15.13.
After the conversion to U-Boot device model, the SD card is
device '1', so change the boot script accordingly.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The Bamboo board is an evaluation board for PowerPC 440EP CPUs.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
PowerNV is the platform using the OPAL [1] firmware on OpenPOWER
systems. OPAL first loads a kernel and an initramfs image based on
buildroot including a second boot loader petitboot [2]. The latter
does device discovery and kexecs a new Linux image from disk or
network.
QEMU implements PowerNV machines [3] for the POWER8, POWER9 and
Power10 processors which are used for dev and tests. POWER8 images
being compatible with POWER9 and Power10, simply add a single
qemu_ppc64le_powernv8 board for all.
The QEMU script boots directly from a nvme disk because it is simple
enough but a real system would boot from a ramfs first.
[1] https://github.com/open-power/skiboot/blob/master/doc/overview.rst
[2] https://github.com/open-power/petitboot/
[3] https://qemu.readthedocs.io/en/latest/system/ppc/powernv.html
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This platform has its own kernel defconfig in Buildroot, but we cannot
get quick idea about how much it diverged from the in-kernel defconfig.
Let's use the upstream arch/arm/config/versatile_defconfig as a base,
and maintain the diff as a merge-config fragment. The same .config is
still generated based on the 5.10.7 kernel.
The diff is quite big, but this is a good start-point for cleanups.
Follow-up works can drop diff lines unless we find a good reason for
divergence.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
[Arnout: rename linux-nommu.config to linux-nommu.fragment]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This platform has its own kernel defconfig in Buildroot, but we cannot
get quick idea about how much it diverged from the in-kernel defconfig.
Let's use the upstream arch/arm/config/versatile_defconfig as a base,
and maintain the diff as a merge-config fragment. The same .config is
still generated (based on the 5.10.7 kernel).
The diff is quite big, but this is a good start-point for cleanups.
Follow-up works can drop diff lines unless we find a good reason for
divergence.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
[Arnout: rename linux.config to linux.fragment]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This defconfig enables sunxi-mali-mainline-driver so we need to disable
Lima in Linux to prevent Mali to not load.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This defconfig enables sunxi-mali-mainline-driver so we need to disable
Lima in Linux to prevent Mali to not load.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Select BR2_TARGET_UBOOT_NEEDS_OPENSSL to fix the following build
error:
include/image.h:1178:12: fatal error: openssl/evp.h: No such file or directory
1178 | # include <openssl/evp.h>
| ^~~~~~~~~~~~~~~
After the update of u-boot in commit 9a04bbec1c (configs/imx6slevk: bump
U-Boot).
Fixes:
- https://gitlab.com/buildroot.org/buildroot/-/jobs/1946650628
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump U-Boot to 2021.10 and kernel to 5.15.12 version.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This package provides a Mali kernel driver for Sunxi Mali Utgard GPUs. The
trailing -mainline is historical and was used at a time when there was
two packages providing this driver. The "non-upstream" package has
been removed some time ago so before adding new packages bringing
support for other ARM Mali GPU versions or implementations, rename
sunxi-mali-mainline-driver into sunxi-mali-utgard-driver.
Add a legacy entry.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
[Giulio: rebase on master. Add legacy entry instead of substituting the
blob's one]
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This package provides Mali libraries for Sunxi Mali Utgard GPUs. The
trailing -mainline is historical and was used at a time when there was
two packages providing these libraries. The "non-upstream" package has
been removed some time ago so before adding new packages bringing
support for other ARM Mali GPU versions or implementations, rename
sunxi-mali-mainline into sunxi-mali-utgard.
Add a legacy entry.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
[Giulio: rebase on master. Rename SUNXI_MALI_MAINLINE_REV to
SUNXI_MALI_UTGARD_REV in sunxi-mali-mailine-driver.mk and
BR2_PACKAGE_SUNXI_MALI_MAINLINE to BR2_PACKAGE_SUNXI_UTGARD in
sunxi-mali-mainline-driver/Config.in to respect bisectability]
Tested-by: Luca Ceresoli <luca@lucaceresoli.net>
[Build tested only]
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
[Arnout: also update existing select in Config.in.legacy]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The version of the kernel and its headers must be explicitly set because
if you keep the default setting, the kernel is continuously updated in
buildroot with the risk that its image + dtb grow so much that it again
exceeds the 2 MByte of the flash module.
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This is a XIP kernel, so it shouldn't be compressed.
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Bump U-Boot to version 2021.10 and kernel to 5.15.11
Among other things fixes U-Boot build failure,
see https://gitlab.com/buildroot.org/buildroot/-/jobs/1915006081:
---------------------->8-------------------
HOSTLD scripts/dtc/dtc
/usr/bin/ld: scripts/dtc/dtc-parser.tab.o:(.bss+0x10): multiple definition of `yylloc'; scripts/dtc/dtc-lexer.lex.o:(.bss+0x0): first defined here
collect2: error: ld returned 1 exit status
---------------------->8-------------------
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Current U-Boot is an old version and fails to build:
/usr/bin/ld: scripts/dtc/dtc-parser.tab.o:(.bss+0x10): multiple definition of `yylloc'; scripts/dtc/dtc-lexer.lex.o:(.bss+0x0): first defined here
Bump U-Boot to fix the problem.
Latest U-Boot has switched to distro boot and SPL, so make the necessary
changes to support it. Other advantage of bumping U-Boot is that
it also supports the other imx6ul-pico variants.
While at it, also bump U-Boot to the 5.15 LTS.
Fixes:
- https://gitlab.com/buildroot.org/buildroot/-/jobs/1915006192
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump the AT91BOOTSTRAP bootloader package to new released version 4.0.1
for all the supported boards (SAMA boards + SAM9X60).
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Linux4sam has moved to linux4microchip.
First linux4microchip release for the SAMA & SAM9X60 boards is
linux4microchip 2021.10.
Bump all boards to use this kernel version.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a virtio-net-pci device with a user mode host network backend
Cc: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a virtio-net-pci device with a user mode host network backend
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update AT91bootstrap version to released 4.0.0 instead of using a release
candidate.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add new defconfigs for sama7g5 evaluation kit.
Update README with new defconfigs.
Board uses linux 5.15 mainline.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Select BR2_TARGET_UBOOT_NEEDS_OPENSSL to fix the following build
error:
include/image.h:1178:12: fatal error: openssl/evp.h: No such file or directory
1178 | # include <openssl/evp.h>
| ^~~~~~~~~~~~~~~
Fixes:
- https://gitlab.com/buildroot.org/buildroot/-/jobs/1915006172
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump U-Boot to version 2021.10.
This fixes the following error:
/usr/bin/ld: scripts/dtc/dtc-parser.tab.o:(.bss+0x10): multiple definition of `yylloc'; scripts/dtc/dtc-lexer.lex.o:(.bss+0x0): first defined here
collect2: error: ld returned 1 exit status
Fixes:
- https://gitlab.com/buildroot.org/buildroot/-/jobs/1915006170
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump U-Boot to version 2021.10 and kernel to 5.15.11.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump U-Boot to version 2021.10 and kernel to 5.15.11.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump U-Boot to version 2021.10 to fix the following build error:
/usr/bin/ld: scripts/dtc/dtc-parser.tab.o:(.bss+0x10): multiple definition of `yylloc'; scripts/dtc/dtc-lexer.lex.o:(.bss+0x0): first defined here
Fixes:
- https://gitlab.com/buildroot.org/buildroot/-/jobs/1915006177
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Select BR2_TARGET_UBOOT_NEEDS_OPENSSL to fix the following build
error:
include/image.h:1178:12: fatal error: openssl/evp.h: No such file or directory
1178 | # include <openssl/evp.h>
| ^~~~~~~~~~~~~~~
Fixes:
- https://gitlab.com/buildroot.org/buildroot/-/jobs/1915006189
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Select BR2_TARGET_UBOOT_NEEDS_OPENSSL to fix the following build
error:
include/image.h:1178:12: fatal error: openssl/evp.h: No such file or directory
1178 | # include <openssl/evp.h>
| ^~~~~~~~~~~~~~~
Fixes:
- https://gitlab.com/buildroot.org/buildroot/-/jobs/1915006257
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Select BR2_TARGET_UBOOT_NEEDS_OPENSSL to fix the following build
error:
include/image.h:1178:12: fatal error: openssl/evp.h: No such file or directory
1178 | # include <openssl/evp.h>
| ^~~~~~~~~~~~~~~
Fixes:
- https://gitlab.com/buildroot.org/buildroot/-/jobs/1915006500
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
kernel & uboot come from Olimex forks
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes:
In file included from include/bootm.h:10:0,
from tools/image-host.c:12:
include/image.h:1178:27: fatal error: openssl/evp.h: No such file or directory
# include <openssl/evp.h>
^
compilation terminated.
scripts/Makefile.host:112: recipe for target 'tools/image-host.o' failed
make[2]: *** [tools/image-host.o] Error 1
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The kernel now has support for dma, ethernet, i2c, mmc, pinctrl, regulator,
so enable drivers for those, change to a ext4 rootfs and enable DHCP on
eth0.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
