Commit Graph

1050 Commits

Author SHA1 Message Date
Thiago A. Correa
3ba521fe94 Update atngw100_defconfig
Signed-off-by: Thiago A. Correa <thiago.correa@gmail.com>
2009-05-08 06:59:11 -03:00
Thiago A. Corrêa
956c18a704 Make sure AVR32 defconfigs use u-boot 2008.10 (only known version to work properly) 2009-04-30 06:33:27 +00:00
Thiago A. Corrêa
7c66cc18cd Undeprecate u-boot 2008.10 since this is the last version known to work with JFFS2 fs and AVR32 2009-04-30 06:27:33 +00:00
Peter Korsgaard
9dac854a11 target/device: fix busybox version / .config in defconfigs 2009-04-29 21:25:25 +00:00
Thiago A. Corrêa
bb1b213570 Fix atngw100_defconfig busybox config location 2009-04-29 18:27:24 +00:00
Thiago A. Corrêa
52cc210d88 Updated i686 config 2009-04-17 05:50:44 +00:00
Thiago A. Corrêa
d55d6180a2 Fix busybox config file location 2009-04-17 05:44:01 +00:00
Peter Korsgaard
635346844c target/generic: support for busybox >= 1.14.x speed=0 handling 2009-04-15 13:42:12 +00:00
austinf
a1e086da09 unmark the sparc targets as broken, they build if you disable shared libgcc 2009-04-15 09:13:21 +00:00
Peter Korsgaard
e9cb98273d target/Makefile.in: make 3.80 compatibility fix
Patch by Andreas Schweigstill <aschweig@schweigstill.de>
2009-04-09 11:34:11 +00:00
Peter Korsgaard
32faf35112 Makefile: add target-finalize for common filesystem cleanup
And remove from each rootfs variant.
2009-04-07 21:04:31 +00:00
Peter Korsgaard
76e5c2988f target/jffs2: default to big endian format for big endian archs
Same logic as in target/Config.in.arch.
2009-04-07 19:22:50 +00:00
Peter Korsgaard
dbdd03601b target/jffs2: s/Memory Type/Flash Type/ 2009-04-07 19:22:46 +00:00
Peter Korsgaard
bd176bded3 target/jffs2: Put all sub options in a BR2_TARGET_ROOTFS_JFFS2 conditional
And get rid of all the individual 'depends on B2_TARGET_ROOTFS_JFFS2'
2009-04-07 19:22:43 +00:00
Peter Korsgaard
3b4a5f59e1 target: remove BR2_TARGET_ROOTFS_*_SQUASH options
Everything besides ubifs does an unconditional chown -R 0:0 anyway.
2009-04-07 19:22:37 +00:00
Peter Korsgaard
7092bd901d squashfs: add v4.0 support and version selection
Squashfs 4.0 is needed to create file systems for the mainline squashfs
version (mainline from 2.6.29). This is unfortunately not compatible with
the old 3.x version and the external kernel patches, so add a choice
between the 2 versions.
2009-04-06 09:21:36 +00:00
Peter Korsgaard
4ffff5ec9b target/device/Atmel: remove unused legacy u-boot handling 2009-04-01 14:53:50 +00:00
Peter Korsgaard
d290edadb9 fakeroot: install into HOST_DIR 2009-04-01 14:15:19 +00:00
Peter Korsgaard
7737b360df makedevs: install into HOST_DIR 2009-04-01 13:02:07 +00:00
Peter Korsgaard
265f8bb959 target/Config.in.arch: really provide correct --with-arch= for ARM targets
The ARM arch names are armVx, not armX
2009-03-30 10:00:48 +00:00
Peter Korsgaard
b5b921e185 target/Config.in.arch: provide correct gcc --with-arch= for ARM targets
Updated to match gcc-4.3.3/gcc/config/arm/arm-cores.def.
Should fix EABI issues as recently reported to the list.
2009-03-30 08:42:08 +00:00
Peter Korsgaard
30141c22ee target/device/x86: only include Makefile if BR2_TARGET_X86 is enabled
Fixes build breakage for !BR2_TARGET_X86 in kernel headers.
2009-03-24 19:57:48 +00:00
Peter Korsgaard
3803dc14e4 target/linux: default to bzImage for i386/x86_64 2009-03-24 08:28:04 +00:00
Peter Korsgaard
f91a64d224 package: auto* needs perl 2009-03-23 21:45:52 +00:00
Peter Korsgaard
2e47c82b61 u-boot: add 2009.03 release 2009-03-23 13:30:36 +00:00
Peter Korsgaard
589ab711a6 u-boot: get rid of version specific patch dirs
All those dirs seem a bit excessive for a single patch
2009-03-23 13:30:30 +00:00
Peter Korsgaard
cb69d005ad target/generic: s/TTYSO/TTYS0/
Thanks to Hiroshi Shinji for noticing.
2009-03-23 09:44:13 +00:00
Peter Korsgaard
9611fd600b target/generic: add kconfig for serial getty config (port + baudrate)
These are the settings people most often want to tweak for embedded boards,
so add kconfig variables to make it easy to do.
2009-03-20 21:59:43 +00:00
Peter Korsgaard
bf1ccf16a2 target/device: wrap AMD preset in BR2_TARGET_AMD menuconfig 2009-03-20 21:59:37 +00:00
Peter Korsgaard
1a57a54804 target/generic: skeleton: add netdev group for dbus 2009-03-20 08:38:33 +00:00
Peter Korsgaard
77754571b2 pkgconfig: add pkgconfig package for target
The host versions shouldn't be visible in Kconfig, so remove the
reference to BR2_PACKAGE_PKGCONFIG everywhere and prefix the host targets
with host-.

At the same time add pkgconfig for the target (E.G. for development) and
let BR2_PACKAGE_PKGCONFIG control that package.

Notice: all defconfigs in the tree have been updated, but make sure to
disable the pkgconfig package (unless you want it) if you use an external
config, otherwise you'll end up with pkgconfig and glib2 in the target.
2009-03-18 19:19:10 +00:00
Thiago A. Corrêa
0c84c92b13 Fix dependency for custom patches when custom patch is empty. 2009-03-16 11:38:33 +00:00
Thiago A. Corrêa
d96c3de0da Fix build (dependency) with custom patch option 2009-03-13 04:31:43 +00:00
Thiago A. Corrêa
227d6e5245 Revert wrongly commited files (u-boot changes) from -r25617 2009-03-11 21:40:00 +00:00
Thiago A. Corrêa
149c0d450c Let user skip installation of the GUI module for Qtopia 2009-03-11 21:35:07 +00:00
Peter Korsgaard
624b1c4cf1 target/generic: development system needs wchar + program invocation 2009-03-04 11:14:40 +00:00
Peter Korsgaard
7664a62a0c uclibc: add 0.9.30.1 2009-03-03 09:41:15 +00:00
Peter Korsgaard
4aefa7fbb1 s/buildroot.uclibc.org/buildroot.net/ 2009-03-02 08:34:20 +00:00
Peter Korsgaard
4bf006c12c avr32: rename 2.6.28.x kernel patches to match current kernel headers version 2009-02-25 14:28:49 +00:00
Peter Korsgaard
aae3f1b6b3 linux: always apply platform patches if available
Get rid of BR2_KERNEL_HEADERS_PATCH_DIR config, and simply always apply
platform patches if available.
2009-02-25 14:28:35 +00:00
Peter Korsgaard
8259f1529a kernel-headers: remove 2.6.20-22 variants and outdated impi/lzma patches 2009-02-25 14:26:03 +00:00
Peter Korsgaard
4700ea5af2 linux-advanced: don't error out on non writable /tftpboot
Odd that we have 2x the same target right after eachother, but this is
Makefile.in.advanced ofcourse ;)
2009-02-22 10:38:10 +00:00
Peter Korsgaard
5dac2c31e2 u-boot: don't touch config.h unless explicitly requested by user
Fixes the problem of important variables like serverip being overwritten
with empty strings if the network/default env stuff isn't used.
2009-02-10 15:19:57 +00:00
Peter Korsgaard
cfeadbdf6c u-boot: remove unused BOOTARGS / BOOTCMD handling
Not available in Kconfig and no references to it in the tree.
2009-02-10 15:19:24 +00:00
Peter Korsgaard
30ab8666e4 u-boot: don't make ETH1ADDR setting depend on avr32
No sensible reason why this should only be present on avr32.
2009-02-10 15:19:04 +00:00
Thiago A. Corrêa
0442dce7d0 Remove BR2_LINUX_COPYTO_TFTPBOOT from avr32 defconfigs. This will cause build to fail if user is not root and don't have a /tftpboot folder 2009-02-09 17:35:00 +00:00
Peter Korsgaard
8b47a479f5 u-boot: remove commented out line 2009-02-07 06:57:37 +00:00
Thiago A. Corrêa
d16f8bf2cd Simplify kernel naming scheme. Only use kernel name plus the rootfs suffix if one is provided 2009-02-06 17:38:05 +00:00
Peter Korsgaard
8567f5fa15 u-boot: fix dependency for host mkimage 2009-02-04 23:15:51 +00:00
Peter Korsgaard
10f0c6c0b3 linux/Makefile.in.advanced: don't depend on phony target for mkimage
Stops continous rebuilds.
2009-02-04 23:15:48 +00:00
Peter Korsgaard
4d12298c67 buildroot: move BR2_ROOTFS_{PREFIX,SUFFIX} to target menu
As suggested on the list by Thiago - Makes more sense to have this together
with the stuff using it.
2009-02-04 12:47:13 +00:00
Peter Korsgaard
87736033ab target/generic: add ttyCPMx device nodes to device_table / securetty
Serial devices for CPM cores on ppc.
2009-02-03 14:30:44 +00:00
Ulf Samuelsson
23b44e5a37 Update sam9g20 BSP 2009-02-02 07:22:19 +00:00
Peter Korsgaard
23152113a9 buildroot: use same defaults for atmel target as everything else 2009-02-01 19:37:06 +00:00
Ulf Samuelsson
6f295f7c6f Add AT91 defconfigs for binary toolchains 2009-01-31 21:44:04 +00:00
Ulf Samuelsson
37e6f8b7d0 Add barebone at91sam9260 board 2009-01-31 21:05:29 +00:00
Ulf Samuelsson
4847ef7087 Update at91rm9200df BSP 2009-01-31 21:04:45 +00:00
Ulf Samuelsson
c1bb025dff Update atstk200x BSP 2009-01-31 20:44:04 +00:00
Ulf Samuelsson
228f4f8e39 Update atstk1005 BSP 2009-01-31 20:43:32 +00:00
Ulf Samuelsson
d97e32744d Update atngw100 BSP 2009-01-31 20:43:01 +00:00
Ulf Samuelsson
78491a711d Update at91sam9263ek BSP 2009-01-31 20:42:28 +00:00
Ulf Samuelsson
c8ce0bed9e defconfig using binary toolchain 2009-01-31 20:41:36 +00:00
Ulf Samuelsson
ba7113b7f2 defconfig for arm toolchain 2009-01-31 20:41:00 +00:00
Peter Korsgaard
c4cd1bcb84 grub: revert r21974 (features.h should never be included explicitly)
features.h (or something including it) is needed for __UCLIBC* to get
defined - E.G. without that the build breaks without largefile support.

Nigel, what was the reason for your commit and what file not found error
did you see?
2009-01-31 12:30:02 +00:00
Peter Korsgaard
2b3ad678ff grub: fix build
Revert to the -35 debian patch (from stable.debian.net) so the other
patches apply, E.G. effectively revert r23968.

Someone who actually uses grub should probably look into updating our
version.
2009-01-31 12:29:55 +00:00
Ulf Samuelsson
c1e444ff72 Remove AVR32 patches from kernel-headers directory and put them in
"target/device/Atmel/arch-avre/kernel-headers-2.6.28.2"

Make sure BR2_KERNEL_HEADERS_PATCH_DIR is enabled for 2.6.28
Set
KERNEL_HEADERS_PATCH_DIR="target/device/Atmel/arch-avre/kernel-headers-2.6.28.2"
for Atmel AVR32 targets and "valka"
2009-01-30 18:39:03 +00:00
Peter Korsgaard
0c54ef9c9a target/linux/Makefile.in.advanced: get rid of BUILDROOT_USE_XWINDOWS
As discussed on the list.
2009-01-30 14:41:04 +00:00
Peter Korsgaard
acc182cea2 target/Config.in.arch: fix ARM abi setting
Reported by Sven Neumann and based on 7f7aac5d3 in Bernhard's tree.
2009-01-30 11:35:04 +00:00
Peter Korsgaard
a72794391a readline: s/BR2_READLINE/BR2_PACKAGE_READLINE/
Package configs should start with BR2_PACKAGE_.
2009-01-30 09:54:59 +00:00
Ulf Samuelsson
c528189f96 Move AVR32 patch to kernel header to unbreak several applications 2009-01-30 08:53:08 +00:00
Ulf Samuelsson
0effa31366 Update some comments, which will cause defconfig to wait for input 2009-01-29 23:32:06 +00:00
Ulf Samuelsson
4ab2b56d19 Update some comments, which will cause defconfig to wait for input 2009-01-29 23:23:51 +00:00
Ulf Samuelsson
0ed2265be4 Update some comments, which will cause defconfig to wait for input 2009-01-29 23:22:27 +00:00
Ulf Samuelsson
a1e2f48a2c at91rm9200df defconfig comment update 2009-01-29 23:02:41 +00:00
Ulf Samuelsson
6031f96b50 2.6.23 is not patchable for at91, cleanup some comments 2009-01-29 22:45:55 +00:00
Ulf Samuelsson
9aa7366856 Delete AT91 patches before 2.6.22 2009-01-29 22:40:27 +00:00
Ulf Samuelsson
8a97c4ea19 Cleanup of AT91 patches 2009-01-29 22:33:23 +00:00
Ulf Samuelsson
1a070853d6 Remove some unneeded AT91 patches 2009-01-29 22:11:46 +00:00
Ulf Samuelsson
b389a73cf1 Update at91sam9263ek BSP 2009-01-29 22:00:58 +00:00
Ulf Samuelsson
acaf54afe1 Update at91sam9261ek BSP 2009-01-29 21:54:58 +00:00
Ulf Samuelsson
43036ab968 Update at91sam960dfc BSP 2009-01-29 21:47:42 +00:00
Ulf Samuelsson
495d0d69f0 Update at9sam9g20dfc BSP 2009-01-29 21:37:29 +00:00
Ulf Samuelsson
38986e2cc2 Cleanup AT91 board support 2009-01-29 21:29:19 +00:00
Ulf Samuelsson
6087c68fe5 Clean up at91bootstrap 2009-01-29 21:28:57 +00:00
Ulf Samuelsson
f8cdfdaada Update at91rm9200df BSP 2009-01-29 21:27:51 +00:00
Ulf Samuelsson
3a7e2fd783 Remove default value from choice in x86 config 2009-01-29 21:17:36 +00:00
Ulf Samuelsson
b31e63aaf1 Remove obsolete at91bootstrap patches 2009-01-29 20:52:52 +00:00
Ulf Samuelsson
ad54aa3ba7 Clean up AVR32 Linux support for atngw100, atstk100x and atstk1005
The boards now support 2.6.27.13 as default
There are configs for 2.6.28.2, but this patch is marked (experimental)
Configuration options for no longer existing patches are removed
(AC-97,ISI and PS2-I/F)
2009-01-29 20:51:05 +00:00
Ulf Samuelsson
010a1acb23 Clean up ARM Ltd. BSP 2009-01-29 20:10:23 +00:00
Ulf Samuelsson
9d58dd7384 Update x86 BSP to latest uclibc/linux/tools versions 2009-01-29 19:25:24 +00:00
Ulf Samuelsson
37ae66f462 Clean up x86 support 2009-01-29 17:52:39 +00:00
Ulf Samuelsson
7f44fb1ae2 Clean up ARM Ltd BSP 2009-01-29 17:41:36 +00:00
Ulf Samuelsson
e5fbca8e8f Remove Via BSP which only provide support for linux-2.4 2009-01-29 17:26:08 +00:00
Ulf Samuelsson
80aa788939 Remove Soekris BSP which only provide support for linux-2.4 2009-01-29 17:23:35 +00:00
Ulf Samuelsson
c73c1193f3 Remove jp BSP which only provide support for linux-2.4 2009-01-29 17:22:49 +00:00
Ulf Samuelsson
7785182e46 Remove Hitachi BSP, does not do ANYTHING except providing a differernt uClibc configuration for an obsolete version 2009-01-29 17:22:10 +00:00
Ulf Samuelsson
2f1eb9e4b8 Remove unneeded ARM architecure patch, just a clone of SAM9260 support 2009-01-29 17:21:16 +00:00
Peter Korsgaard
83e903468c target/device: remove obsolete Sharp/LNode80 platform
As discussed on the list and requested on irc:

< prpplague> Jacmet: hey, just wanted to drop a note to confirm that the
             LNode80 can be removed, we never went into full scale
             production of it, only 20 were ever made
2009-01-29 17:05:12 +00:00
Ulf Samuelsson
a77bf1ecde Update atstk100x BSP 2009-01-29 09:33:25 +00:00
Ulf Samuelsson
b47232e869 Add AVR32 support for linux-2.6.28.2 2009-01-29 09:32:45 +00:00
Ulf Samuelsson
6653646d66 Update at91rm9200df BSP 2009-01-27 06:05:15 +00:00
Ulf Samuelsson
0dbf9dd7ab Create a common BR2_COPYTO to prepare to replace
all the different COPYTOs spread out all over
Buildroot.
Generate COPY_FILE subroutine which can be used
to copy a file.

$(COPY_FILE , file, directory, filename)
This will copy to binary dir and to the selected
copy dir if set in new config (intended to replace
all old COPYTO configs)

This is overridden by BUILDROOT_COPYTO,
if set into the environment.
2009-01-26 23:52:31 +00:00
Ulf Samuelsson
78fa0d4eb4 Update at91sam9260dfc BSP 2009-01-26 21:19:05 +00:00
Peter Korsgaard
87c5abadfa target/device/Atmel/arch-avr32: remove old unused kernel patches
As discussed on the list:

22:08 < HcE> Jacmet: so yes, AVR32 wise you can delete anything older than
             2.6.27
2009-01-26 21:10:11 +00:00
Ulf Samuelsson
8586be28d4 Replace BUILDROOT_KERNEL_CONFIG_METHOD environment variable with BUILDROOT_USE_XWINDOWS 2009-01-26 20:17:06 +00:00
Peter Korsgaard
d2c6e22040 linux/advanced: default to make menuconfig 2009-01-26 16:25:17 +00:00
Peter Korsgaard
7f4cb62a1b u-boot: halt build early with description if no u-boot board name is set 2009-01-26 14:49:19 +00:00
Peter Korsgaard
3bab463be4 u-boot: clean up after Ulf
As discussed on the list.
2009-01-26 14:49:00 +00:00
Peter Korsgaard
6218173ce2 u-boot: mark 2008.10 version as recent 2009-01-26 14:04:10 +00:00
Ulf Samuelsson
377773e2f7 Fix erronous mkimage target 2009-01-26 11:46:44 +00:00
Ulf Samuelsson
f529db89db Revert bad patch to fix linux rebuild problem 2009-01-26 10:38:00 +00:00
Ulf Samuelsson
86c392e504 Update patchlevels for linux-2.6.25/27/28 2009-01-25 23:42:09 +00:00
Ulf Samuelsson
147b034d0d Ensure /boot exists, Write linux version to file,in case the kernel version has changed after the first build 2009-01-25 23:14:55 +00:00
Ulf Samuelsson
4374b75504 Revert Atmel boards back to desired operation 2009-01-25 21:53:14 +00:00
Ulf Samuelsson
9f20b5f97f Use new SHELL variable BUILDROOT_KERNEL_CONFIG_METHOD
which will override selection between xconfig and menuconfig

make xconfig will, if it fails, or user does not save configuration
result in make menuconfig beeing tried

Fix several issues causing final part of linux to be regenerated
on each make.
2009-01-25 21:48:33 +00:00
Ulf Samuelsson
4f081d489d Update at91sam9261ek BSP 2009-01-25 21:01:33 +00:00
Peter Korsgaard
7e41b89b56 target/linux-advanced: default to menuconfig for all archs
Default to menuconfig for atmel targets as well, mention QT3 dependency
for make xconfig and update affected defconfigs.
2009-01-25 20:11:31 +00:00
Ulf Samuelsson
d661484784 Add linux config for at91sam9261ek 2009-01-24 10:23:00 +00:00
Ulf Samuelsson
f5371f72f3 Update at91sam9260dfc BSP 2009-01-24 10:16:53 +00:00
Peter Korsgaard
7b981dbf06 Revert r24952 (BR2_TARGET_TEST_PACKAGES)
As discussed on the list. It is already out of date
(BR2_TARGET_UBOOT_2009_01_RC3, BR2_PACKAGE_RAIDTOOLS), is the wrong solution
and breaks the make allyesconfig; make menuconfig / sed workflow.
2009-01-23 20:45:30 +00:00
Ulf Samuelsson
9d51c94e35 Bump AT91 u-boot patches to 2009.01 2009-01-23 19:41:42 +00:00
Ulf Samuelsson
ce6ecb3b0a Update at91sam9263ek BSP 2009-01-23 18:05:25 +00:00
Ulf Samuelsson
501c007158 Do not reapply linux patches if LINUX26_PATCH_SOURCE is empty, and we are continuing building after a failure 2009-01-23 00:54:23 +00:00
Ulf Samuelsson
6f39a7c62e Update AT91 u-boot patches to 2009.01 2009-01-22 23:09:41 +00:00
Ulf Samuelsson
e4c96c2d26 Use latest u-boot as default 2009-01-22 18:46:00 +00:00
Peter Korsgaard
5f1fb36aa3 u-boot: add 2009.01, remove -rc3 2009-01-22 10:11:09 +00:00
Ulf Samuelsson
6fd0d36d32 Add simple way to enable most (but not all) targets for testing purposes 2009-01-22 07:53:24 +00:00
Ulf Samuelsson
2f4722048b Fix AVR32 u.boot build bug 2009-01-22 07:39:12 +00:00
Peter Korsgaard
a5e5bdd51b u-boot: unbreak target tools
Got broken by r24697.
2009-01-21 15:49:06 +00:00
Ulf Samuelsson
8a97f125ab U_BOOT_ARCH_PATCH_DIR should contain a value or should not be defined, empty string is not allowed 2009-01-20 08:11:26 +00:00
Ulf Samuelsson
5a46761446 Bump u-boot to -2009.01-rc3, and add possibility to apply the arch-at91 patches if using an at91 2009-01-19 22:42:03 +00:00
Ulf Samuelsson
b71c76a10a Fix some bugs in advanced linux configuration, remove some arbitrary combinations of major/minor directly supported, general cleanup 2009-01-19 21:27:04 +00:00
Peter Korsgaard
675b479c2f Kconfig: remove 'default n' and 'default no' (see r22874)
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
2009-01-18 14:20:18 +00:00
Ulf Samuelsson
bdac3e337f Update broken AVR32 toolchain, and update configs for this, deprecate all but latest AVR32 toolchain 2009-01-16 22:39:05 +00:00
Peter Korsgaard
3ff43a6838 buildroot: convert remaining WGET users to DOWNLOAD helper 2009-01-16 12:07:53 +00:00
Peter Korsgaard
ed5f6093c0 target/: convert to DOWNLOAD helper 2009-01-16 11:48:43 +00:00
Peter Korsgaard
d58636d765 buildroot: add BR2_BACKUP_SITE and DOWNLOAD helper
This is the long requested backup mirror support. So far only enabled
for Makefile.autotools.in, but there's no reason why we cannot use
DOWNLOAD everywhere.

Notice, I'm still syncing http://buildroot.uclibc.org/downloads/sources/
2009-01-16 10:27:48 +00:00
Peter Korsgaard
2b893123a5 BR2_PRIMARY_SITE: move to Mirrors and Download locations menu 2009-01-16 10:27:39 +00:00
Ulf Samuelsson
63e0cdb206 Update kernel snapshot version 2009-01-15 23:19:28 +00:00
Ulf Samuelsson
3f8d9b275f Update at91sam9263ek BSP 2009-01-13 18:45:19 +00:00
Peter Korsgaard
a81367744f buildroot: mark alpha as broken
It still doesn't build with threading + shared libs disabled
2009-01-13 15:14:21 +00:00
Peter Korsgaard
8161c45b89 buildroot: mark ia64, m68k, nios2, sparc and sparc64 as broken
No sense in showing the architecture options when they cannot even build
the toolchain.
2009-01-12 20:58:54 +00:00
Peter Korsgaard
b2c5b9109e toolchain: fix cris build with 2.6.28 kernel headers
Patch by Hinko Kocevar <hinko.kocevar@cetrtapot.si>
2009-01-12 20:16:16 +00:00
Peter Korsgaard
b24c3215c1 buildroot: get rid of s390 support
As discussed on the list. It isn't supported by uclibc, so I strongly doubt
anyone has been using it.
2009-01-12 14:36:14 +00:00
Ulf Samuelsson
e791c63303 Update sam9263EK BSP 2009-01-12 10:25:31 +00:00
Ulf Samuelsson
0fac1d7d4b Support large sector NAND flash for JFFS2 2009-01-12 00:43:22 +00:00
Ulf Samuelsson
e897b420fb Update at91bootstrap to 2.10 2009-01-11 21:44:14 +00:00
Ulf Samuelsson
f4431ebb08 Move AT91 patches for u-boot-2009.01-rc1 to device/Atmel/arch-arm/u-boot/2009.01-rc1 2009-01-11 21:42:07 +00:00
Ulf Samuelsson
00a1ff5bc3 Remove premature deprecation of u-boot-1.2.0-atmel 2009-01-11 21:39:54 +00:00
Ulf Samuelsson
41950c0d2d Update AVR32 uclibc config for 0.9.30 2009-01-11 21:15:46 +00:00
Ulf Samuelsson
83b2a67eec Update defocnfig for ngw100 2009-01-11 21:15:08 +00:00
Ulf Samuelsson
bd8c8ab095 Add linux-2.6.27.10 config for stk100x 2009-01-11 21:14:17 +00:00
Ulf Samuelsson
06b9e7abe7 Move kernel localversion files to TARGET_DIR/boot
to allow packages which assumes that LINUX26_DIR
and the /lib/modules/LINUX_VERSION use
the consistent version numbering to build.

Create a file ".linux-version" containing
the real linux version in $(PROJECT_B UILD_DIR)
to allow packages to read the correct linux version
2009-01-11 20:43:24 +00:00
Ulf Samuelsson
7aa8a5acce Update at91sam9261ek configs, build completes 2009-01-09 06:31:01 +00:00
Ulf Samuelsson
34b01cc4a1 Make sure U-boot is built, if we do make uImage 2009-01-09 06:30:08 +00:00
Ulf Samuelsson
4ff9d431b8 Update sam9263ek configs, build completes 2009-01-08 23:01:50 +00:00
Ulf Samuelsson
ab5c2cfc03 Linux26 requires "mkimage" from u-boot to be in the PATH
if an uImage is to be built for arm, avr32, blackfin and sh.

PATH has therefore been set to have $(STAGING_DIR)/usr/bin
as the first item allowing linux to find mkimage.

This patch will, if an uImage is built, create a "u-boot-toóls"
directory in the PROJECT_BUILD_DIR directory.
$(STAGING_DIR)/usr/bin/mkimage is copied to this directory
and the PATH variable will now include "u-boot-tools"

If an uImage is built, then the linux build will now depend on "u-boot".
2009-01-08 22:58:30 +00:00
Peter Korsgaard
9dd66ff7e9 target/u-boot: more cleanups
As discussed on the list.

- No sense in depending on BR2_TARGET_UBOOT when the configurations are
  within a if BR2_TARGET_UBOOT conditional.
- n is default, so remove 'default n'
- clarify nested conditionals
2009-01-08 14:58:54 +00:00
Peter Korsgaard
2b75de900b target/u-boot: cleanup
Fix s/Linux/U-Boot/ typo, default to the latest stable version, mark
old versions as deprecated and comment out unreleased version for now.
2009-01-08 14:58:51 +00:00
Ulf Samuelsson
03c16d10e2 Update atngw100 configs, needs patch from Atmel fork for strace to build correctly, otherwise disable strace 2009-01-06 23:02:50 +00:00
Ulf Samuelsson
036f1daaa0 Remove incorrrect dependency on latest minor kernel patch 2009-01-06 23:00:24 +00:00
Ulf Samuelsson
ec2eb199ca Add PATH to linux build options to allow 'mkimage' to be found. Neccessary for arm,blackfin,sh and avr32 in linux-2.6.28 2009-01-06 21:42:43 +00:00
Ulf Samuelsson
c7b77e5669 Set default kernel to BR2_LINUX26_STABLE, Remove duplicate definion of BR2_KERNEL_CURRENT_VERSION and remove comments from Config.in choices 2009-01-06 21:24:42 +00:00
Ulf Samuelsson
3867e083e1 Update at91sam9260 Board Support Package to linux-2.6.28 2009-01-06 16:42:15 +00:00
Ulf Samuelsson
7e9a5c9500 Update AT91SAM9G20 Board Support to linux-2.6.28 2009-01-06 16:39:17 +00:00
Ulf Samuelsson
c299ec7a8d Add support for SAM9G20 in at91bootstrap 2009-01-06 16:36:45 +00:00
Ulf Samuelsson
0082e57f16 Add CONFIGs for new commands to at91 parts 2009-01-06 16:24:42 +00:00
Ulf Samuelsson
3ab31f3a6a Add support for waiting for NFS root server before booting 2009-01-06 16:24:06 +00:00
Ulf Samuelsson
756b2f1f98 Remove patches that should not have been inlcuded in the spimux commit 2009-01-06 16:21:36 +00:00
Ulf Samuelsson
ce5971ecca Add 'mux' command to control ext mux on at91rm9200dk/ek 2009-01-06 16:17:43 +00:00
Ulf Samuelsson
d6afbb99b4 Add 'led' command to control coloured LEDs 2009-01-06 16:17:15 +00:00
Ulf Samuelsson
b4a6b4eaa4 Remove an extra #endif from u-boot.factory 2009-01-06 16:13:08 +00:00
Ulf Samuelsson
0590b0ff85 Fix some CFG/CONFIG related problems for AT91RM9200 configuration of U-Boot 2009-01-06 16:10:56 +00:00
Ulf Samuelsson
d5e3c2c55a Use the correct sam9g20 patch for 2009.01-rc1 2009-01-06 16:09:53 +00:00
Ulf Samuelsson
b33e097596 When you set BR2_PACKAGE_LINUX_USE_DEFCONFIG
to configure linux using the

make <board>_defconfig

You have to supply the $(BOARD_NAME) variable.
Add this info in the help text for
target/linux/Makefile.in.advanced

----------------

When you do not set BR2_PACKAGE_LINUX_USE_XCONFIG
to configure linux using "$make <XXXX>config
The choices "$make menuconfig" or "$make xconfig"
should not be visible.
Add dependency
2009-01-06 14:40:24 +00:00
Ulf Samuelsson
6bcd872614 Use PROJECT-u-boot-VERSION-DATE.bin as u-boot target
Provide link using "u-boot.bin"

Add BR2_TARGET_UBOOT_DEFAULT_ENV config
If this is set, Buildroot will generate
a default environment to allow easy downloading
of the kernel and root file system
Both as compile time data and an autoscript.

Make u-boot depend on $(U_BOOT_TARGETS)
Add "u-boot-autoscript" to U_BOOT_TARGETS if 
BR2_TARGET_UBOOT_DEFAULT_ENV is set.

Take kernel name from Linux build.

Use correct ARCH when mkimaging the autoscript.
Do not use TARGET_ATMEL_COPYTO for generic u-boot.

Hide dataflash memory configurations when 
different boot memory is used.
2009-01-06 14:16:27 +00:00
Peter Korsgaard
1250acd942 u-boot: unbreak build after r24674
Disable broken autoscript handling so the build atleast completes
2009-01-05 16:16:30 +00:00
Peter Korsgaard
62ee161f0d u-boot: revert U_BOOT_TARGET part of r24646
More u-boot build unbreaking. r24646 added U_BOOT_TARGET which uses the
nonexisting BOARDNAME variable, which means that the filename expands
to -u-boot-*, confusing ln.

There's limited point in having that symlink in the first please, so simply
revert that hunk.
2009-01-05 16:12:34 +00:00
Peter Korsgaard
f7870ba027 u-boot: unbreak build after r24646
Unset variables aren't the same as "".
2009-01-05 15:52:44 +00:00
Peter Korsgaard
585aca9a5a add .empty files for git-svn
git-svn (and git) doesn't handle empty directories, so add .empty files
to those dirs like elsewhere in buildroot.

Those empty directories are normally not a big deal, but the recent changes
to u-boot broke the build.
2009-01-05 15:47:00 +00:00
Ulf Samuelsson
2d696140c2 Allow use of uClibc-0.9.30 for AVR32 toolchain 2009-01-03 16:25:47 +00:00
Ulf Samuelsson
cc30201f47 Update target/device/Atmel/*/Makefile.in
------------------------------------------
Replace $(BOARDNAME)_PATH with BOARD_PATH
Set U-Boot targets for 1.2.0-atmel as well as 2009.01-rc1
Remove hardwiring of BusyBox configuration files.
Remove older BusyBox configuration files
Remove "at91sam9260dfc-linux-2.6.28-rc6.config" from at91sam9g20dfc directory
Update "at91rm9200df_defconfig"
Add "at91rm9200df-linux-2.6.28.config"
Update "at91sam9260dfc_defconfig"
2009-01-03 16:10:50 +00:00
Ulf Samuelsson
c7066b1807 Generate an autoscript for configuring u-boot in $(BINARIES_DIR)
mkimage the autoscript to autoscript.$(PROJECT)-
Move build of u-boot-1.2.0-atmel to target/u-boot
	Only visible for AT91 targets.
Fetch prepatched 1.2.0-atmel tarball from $(BR2_ATMEL_MIRROR)
Rest from normal location.
Introduce U_BOOT_CONFIGURE_OPTS
	Set to NOSOFT_FLOAT for u-boot-1.2.0-atmel
Disable target/device/Atmel/u-boot
Keep files in target/device/Atmel/u-boot during a test period.

Files:
M      target/device/Atmel/Makefile.in
M      target/device/Atmel/Config.in
M      target/u-boot/Makefile.in
M      target/u-boot/Config.in
A      target/u-boot/1.2.0-atmel
2009-01-03 15:50:38 +00:00
Nigel Kukard
98eefe7074 Fixed missing " 2009-01-03 15:03:16 +00:00
Ulf Samuelsson
4eb79e2732 Update linux versions 2009-01-03 01:06:36 +00:00
Ulf Samuelsson
d2485586b9 Fix remaining 'butterfinger' issue 2009-01-03 00:40:02 +00:00
Ulf Samuelsson
5dec4da010 Remove debugging variable added to svn by mistake, (Thanks Pter) 2009-01-03 00:07:25 +00:00
Ulf Samuelsson
7213dae7a5 Add support for at91sam9g20 to U-Boot 2009-01-03 00:06:13 +00:00
Ulf Samuelsson
fc6be2d970 Add facilities for installing u-boot in different locations 2009-01-03 00:05:42 +00:00
Ulf Samuelsson
f563fc9565 Provide factory default command to u-boot, using Buildroot variables 2009-01-03 00:04:55 +00:00
Ulf Samuelsson
75c6381110 Fix issue with AT91/AVR32 Ethernet MACB 2009-01-03 00:04:14 +00:00
Ulf Samuelsson
ff9b66d5d0 Add X-Modem tools for minicom to u-boot allowing easy downloading of U-Boot 2009-01-03 00:03:31 +00:00
Ulf Samuelsson
b00e4bf529 Add Memory configration to u-boot (Config.in) and remove comments from 'choice's', Rearrange options for clarity 2009-01-03 00:02:07 +00:00
Ulf Samuelsson
e074c38220 Add Memory configuration to U-Boot build, remove some debugging info 2009-01-03 00:00:46 +00:00
Ulf Samuelsson
abda401711 Support AT91 in vanilla U-Boot 2009-01-02 11:18:09 +00:00
Ulf Samuelsson
e195cb19f2 Update at91sam9260dfc BSP 2009-01-02 08:32:25 +00:00
Peter Korsgaard
69f8592407 buildroot: set SHELL instead of messing around with CONFIG_SHELL
Simply set SHELL to bash instead of adding CONFIG_SHELL to all shell
invocations. CONFIG_SHELL is still set, as it is used by kconfig.
2009-01-01 21:20:35 +00:00
Nigel Kukard
33b846773a * Added "generic" option to x86_64 target
- Default to generic and not core2
2009-01-01 17:48:06 +00:00
Ulf Samuelsson
3de57c4447 Update kernel patch from 2.6.28-rc6 to 2.6.28 2008-12-30 08:26:51 +00:00
Ulf Samuelsson
e2ba403798 Use correct filename for patch 2008-12-29 15:13:32 +00:00
Ulf Samuelsson
b9dc2a4b66 Use correct filename for patch 2008-12-29 15:12:10 +00:00
Peter Korsgaard
cd7245fc11 target/generic: add ttyAMAx device nodes (E.G. for qemu-system-arm) 2008-12-23 14:54:49 +00:00
Ulf Samuelsson
350ced4a71 Add updated gcc-4.2.2 prepatched toolchain for AVR32 2008-12-20 22:27:56 +00:00
Ulf Samuelsson
039ed4b223 Add AP7200 eval kit configuration 2008-12-20 22:26:24 +00:00
Ulf Samuelsson
207503d59e Add BSP for AP7200 2008-12-20 22:24:11 +00:00
Ulf Samuelsson
736235cb0f Add support for AT32AP7200 2008-12-20 22:23:15 +00:00
Ulf Samuelsson
c923379e8a Add 2.6.27.7 patches for AVR32 2008-12-20 22:19:38 +00:00
Ulf Samuelsson
80b526fd3c Hide AT91 features if not an AT91 ARM 2008-12-20 22:17:52 +00:00
Ulf Samuelsson
1942056ae7 Use correct linux version when applying latest minor patch 2008-12-20 21:45:59 +00:00
Ulf Samuelsson
2ee2248cc4 Sort Linux debug info in alphabetical order 2008-12-20 21:45:05 +00:00
Ulf Samuelsson
f0ebb39d18 Put latest version info in separate file for easier maintenance 2008-12-20 20:57:07 +00:00
Ulf Samuelsson
fc92f159bb Update to latest linux versions 2008-12-17 18:03:29 +00:00
Ulf Samuelsson
7591247d51 Remove AVR32 target variants, the current entries refers to CHIPS which have the same CPU core, CHIP variant is defined elsewhere 2008-12-17 09:28:33 +00:00
Peter Korsgaard
7139678f78 make the default etc/init.d/S40network compatible with msh
msh is currently the only good choice for uClinux but it doesn't
understands shell functions.  In this case there is nothing to gain
by using shell functions anyway.

Signed-off-by: Nicolas Pitre <nico@cam.org>
2008-12-08 14:52:16 +00:00
Peter Korsgaard
7cb7952b40 target/initramfs: actually build initramfs target
Currently, BR2_TARGET_ROOTFS_INITRAMFS doesn't actually do anything,
as it doesn't alter $(TARGETS)

This change hooks up the TARGETS variable to INITRAMFS_TARGET (which
is only set if BR2_TARGET_ROOTFS_INITRAMFS=y), so that the initramfs
list is built.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
2008-12-08 13:42:04 +00:00
Peter Korsgaard
326ae9c89b target/tar: remove unused cut'n'paste leftover 2008-12-08 09:07:01 +00:00
Peter Korsgaard
224c62ecf8 target: paths may need stripping
r24310 removed a few too many strips.
2008-12-08 09:06:59 +00:00
Peter Korsgaard
4b72854dde target/: get rid of unneeded $(strip ..) 2008-12-08 08:15:58 +00:00
Peter Korsgaard
6dbe1188de taget/linux: handle non-modular kernels
Based on b151271 in Bernhard's tree.
2008-12-07 06:55:36 +00:00
Thomas Petazzoni
be5be0ec5a Compiling current SVN fails with the following error for me:
cc1: warnings being treated as errors
 buildroot/buildroot/build_powerpc/makedevs/makedevs.c: In function main:
 buildroot/buildroot/build_powerpc/makedevs/makedevs.c:531: error:
 ignoring return value of system, declared with attribute warn_unused_result

This change adds a simple warning if system() fails.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2008-12-02 22:26:00 +00:00
Peter Korsgaard
63402d7737 target/cramfs/cramfs.mk: Fix device table not being passed to mkcramfs
While mkcramfs was being patched to support a device table, the target device table was not being passed to the mkcramfs options. This patch fixes that

Signed-off-by: Jared Holzman <j.holzman@genesysdesign.com.au>
2008-12-02 09:15:08 +00:00
Ulf Samuelsson
1158bc9a25 Add support for AT91SAM9G20 & -EK 2008-11-29 22:00:29 +00:00
Ulf Samuelsson
074da836d2 Add AT91 support for 2.6.27.7 and 2.6.28-rc6 2008-11-29 21:58:48 +00:00
Ulf Samuelsson
4f1887e424 Update Linux versions 2008-11-29 21:56:25 +00:00
Peter Korsgaard
193508d257 linux: remove unused BR2_LINUX_BOARD_PATCH
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
2008-11-14 13:39:58 +00:00
Peter Korsgaard
204821c56c target/Config.in.toolchain: cleanup 2008-11-14 10:06:44 +00:00
Ivan Kuten
da6f419424 revert 23987 until proper implementation 2008-11-10 11:17:21 +00:00
Ivan Kuten
1f370768bc Download Kernel.org minor patches at the same time as full sources.
Signed-off-by: Julien Boibessot <julien.boibessot@armadeus.com>
2008-11-10 10:45:46 +00:00
Thomas Petazzoni
f5ca546b76 Fix Grub tarball version as the current version has disappeared from
Debian mirrors.

Patch provided by Roberto A. Foglietta <roberto.foglietta@gmail.com>
2008-11-08 22:24:39 +00:00
Hans-Christian Egtvedt
12b5b0124b linux26: make installation of modules rule depend on .depend_done
This patch will make the installation of modules rule depend on .depend_done instead of .configured to make sure make prepare is run before modules are installed.

Make kernelversion does not work before make prepare has been run.

Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
2008-11-05 12:59:32 +00:00
Peter Korsgaard
ab1c8b3943 Kernel build fix related to external toolchain use
This patch prevents the user from select "linux (Same version as linux
headers)" as a choice for building the kernel when an external binary
toolchain is used, since "same version as linux headers" doesn't make
sense when an external toolchain is used.

It fixes the issue encountered by Hartley <hartleys@visionengravers.com>

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2008-11-04 19:58:48 +00:00
Peter Korsgaard
e9bbc07625 syslinux: fix download url 2008-11-02 19:21:12 +00:00
Arnar Mar Sigurðsson
057eca1834 Update valka target 2008-10-31 17:22:59 +00:00
Hans-Christian Egtvedt
fc23ee8dea linux: skip installing modules if modules are disabled in kernel config
This patch will check if CONFIG_MODULES is set in the kernel .config, if not
yes then it will skip installing the modules.

Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
2008-10-30 14:56:58 +00:00
Hans-Christian Egtvedt
fed8349509 linux: make touch also create the dependency file when installing modules
Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
2008-10-30 14:22:11 +00:00
Hans-Christian Egtvedt
aabaf095a0 linux: fix typo in status printout
Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
2008-10-30 14:02:47 +00:00
Hans-Christian Egtvedt
4c1a34471d linux: add probing for kernel version when installing modules
This patch will ask the kernel for the specific version before doing
modules_install, that way Buildroot will know which directories to remove and
what parameters to use for depmod. Needed when compiling a kernel grabbed from
GIT or vendor specific releases.

Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
2008-10-30 14:02:05 +00:00
Peter Korsgaard
cb9d03ca6e target: add /sys directory to target skeletons needing it
The remaining target_skeletons where /etc/fstab mentions sysfs
2008-10-18 13:00:58 +00:00
Peter Korsgaard
ca672dc4dc target/device/Atmel: add /sys to target skeletons
Reported by John Schimandle
2008-10-18 12:47:42 +00:00
Peter Korsgaard
921eb994f8 Add Xilinx UARTLITE and MPC5200 PSC device files (serial ports)
From: Grant Likely <grant.likely@secretlab.ca>

The Xilinx UART Lite and MPC5200 Programmable Serial Controller (PSC)
devices have dedicated major/minor numbers.  Add them to the device
table data file so they get are present in the root filesystem
2008-10-17 10:19:41 +00:00
Hans-Christian Egtvedt
0fbec516fd linux: fix copy of Busybox config to target directory
This patch fixes bug report #5204. The Busybox config was not copied from the
correct place.

Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
2008-10-03 07:24:34 +00:00
Peter Korsgaard
5c662fee80 target/linux/advanced: don't hardcode date suffix
Use ROOTFS_SUFFIX instead of hardcoding -$(DATE).

Reported by Lars Lockenvitz.
2008-09-22 12:04:05 +00:00
Peter Korsgaard
49e3aba2d9 target/generic: add uartlite ttyULx devices to securetty 2008-09-16 18:44:54 +00:00
Peter Korsgaard
8a00a1ac65 jffs2: cleanup
Patch by Markus Heidelberg <markus.heidelberg@web.de>

* remove needless help in invisible config options
* correct wrong indenting
* remove unused BR2 variables for default pagesize and devfile
2008-09-07 14:31:39 +00:00
Peter Korsgaard
f8bc2e1e31 target/generic/mini: remove udhcpc default.script entry
It isn't provided in the target skeleton, and avahi gets the
permissions correct so it isn't needed and just confuses users.
2008-08-31 06:26:40 +00:00
Peter Korsgaard
b71d24d032 ubifs: fix long help text lines 2008-08-27 20:19:53 +00:00
Peter Korsgaard
df6555a017 cloop: fix long help text lines 2008-08-27 20:19:50 +00:00
Peter Korsgaard
98f17d003c target/device/jp: fix long help text lines 2008-08-27 20:18:40 +00:00
Peter Korsgaard
f1258adf6b target/device/Atmel: fix long help text lines
And remove trailing spaces while we're at it.
2008-08-27 20:18:37 +00:00
Peter Korsgaard
dc8423d97f squashfs: bump version 2008-08-27 07:46:55 +00:00