Currently, when we need to do a conditional on the type of C library
used, we need to take into account the three toolchain backends. As we
are going to add eglibc support to the Buildroot toolchain backend, it
would become even uglier, so this patch introduces two new hidden
options: BR2_TOOLCHAIN_USES_UCLIBC and BR2_TOOLCHAIN_USES_GLIBC, that
exist regardless of the toolchain backend. The entire Buildroot code
base is converted to use those options.
Note that we have intentionally created only one option
(BR2_TOOLCHAIN_USES_GLIBC) for both glibc and eglibc, since they are
essentially the same, as far as Buildroot is concerned.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Instead of using the 'uclibc' target for all toolchain backends,
introduce more sensible target names for the external toolchain and
Crosstool-NG toolchain backend make targets.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: update manual to match]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This commit converts gdb to the package infrastructure, and therefore
moves it from toolchain/gdb to package/gdb.
The target package is now visible in "Package selection for the
target" => "Debugging, profiling and benchmark". The main option,
"gdb", forcefully selects the "gdbserver" sub-option by
default. Another sub-option, "full debugger" allows to install the
complete gdb on the target. When this option is enabled, then
"gdbserver" is no longer forcefully selected. This ensures that at
least gdbserver or the full debugger gets built/installed, so that the
package is not a no-op.
The host debugger is still enabled through a configuration option in
"Toolchain". It is now visible regardless of the toolchain type (it
used to be hidden for External Toolchains). The configuration options
relative to the host debugger are now in package/gdb/Config.in.host,
similar to how we have package/binutils/Config.in.host.
Since gdb is now a proper package, it is no longer allowed to 'select
BR2_PTHREADS_DEBUG' to ensure thread debugging is available when
needed. Instead, it now 'depends on
BR2_TOOLCHAIN_HAS_THREADS_DEBUG'. This option, in turn, is selected by
the different toolchain backends when appropriate. The
'BR2_TOOLCHAIN_HAS_THREADS_DEBUG_IF_NEEDED' option is removed, since
we no longer need to know when it is allowed to 'select
BR2_PTHREADS_DEBUG'. Also, the 'BR2_PTHREADS_DEBUG' option is moved to
appear right below the thread implementation selection (in the case of
the Buildroot toolchain backend).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Previously, the crosstool-NG backend did depend on the top-level
Buildroot's .config to detect changes in the toolchain options,
using a tentatively-clever heuristic, which also included the full
Buildroot's version string to push down to set the components' versions
strings.
In doing so, any commit in the Buildroot tree would imply a complete
rebuild of the toolchain, even in the case the toolchain options did
not change, thus being a large annoyance (to say the least).
As Buildroot never guaranteed that toolchain options would be detected,
even less handled, and that the internal backend does neither detect nor
act on toolchain options changes, and delegate that to the user, there
is no point in individualising the crosstool-NG backend's behaviour.
This reasoning also applies to the depdency on the crosstool-NG's bundled
.config file, too.
So, just drop the not-so-clever heuristic, and just build the toolchain
once, leaving to the user the responsibility to explictly ask Buildroot
to rebuild the toolchain.
Reported-by: "Przemyslaw Wrzos" <przemyslaw.wrzos@calyptech.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: "Przemyslaw Wrzos" <przemyslaw.wrzos@calyptech.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Thus, the failing step can be easily extracted by autobuilders,
to ease with post-mortem analysis.
At the same time, remove two debug echoes (Arnout).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
No need to recreate a path we already have.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Some users seem to interpret:
make ctng-menuconfig
as being a value that can be fit for the ct-ng config file.
Clarify that it is a command to run, not a possible value.
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When using the crosstool-ng toolchain option, the libc libraries were not
installed to target. Buildroot calls the show-tuple function to determine
the directory to copy from, and it seems that outputs the result to stderr
instead of stdout
Signed-off-by: Floris Bos <bos@je-eigen-domein.nl>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Update the version of glibc to be used, since older versions are
broken with the currently-used binutils versions.
Fixes build issues ending with:
tmpfs/ccvkz3ro.s:33: Error: CFI instruction used without
previous .cfi_startproc
This new version does not have RPC support, so update the Config.in.
CC: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
We have updated our Crosstool-NG configuration to gcc 4.6.x, but the
PPL and CLoog versions were not updated accordingly. With gcc 4.6.x,
at least PPL 0.11 is needed, and only CLoog > 0.15.9 can work with PLL
0.11.
Fixes:
http://autobuild.buildroot.org/results/c22758a30c3b8abb582150cefd7099605c527e14/build-end.log
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This bumps the GCC version from 4.4.6 to 4.6.3 to for
*.config-eglibc
*.config-glibc
*.config-uClibc
be equal to the default GCC setting in buildroot as well in addition to
commit b855154ee8.
Signed-off-by: Carsten Schoenert <c.schoenert@t-online.de>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The BR2_INET_RPC has for a long time been a not very descriptive
configuration option name, and with the advent of non-RPC glibc
toolchains and the apparition of libtirpc, we really need to rename it
to something more sensible, BR2_TOOLCHAIN_HAS_NATIVE_RPC.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Since we are some day going to finally rename the badly named common
toolchain options (BR2_USE_WCHAR, BR2_ENABLE_LOCALE, BR2_INET_RPC,
etc.) into something more logical, let's start using the Crosstool-NG
toolchain options in the Crosstool-NG code.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Since 11017f081f, the Crosstool-ng
backend generates toolchains that have a prefix inconsistent with what
Buildroot expects. Buildroot expects a "buildroot" vendor name, while
Crosstool-NG builds toolchain with the "unknown" vendor name.
This is causing build failure such as:
http://autobuild.buildroot.org/results/15b2c0e50a81b86dd13af684c9254df2bc0df8de/build-end.log
Fix this by changing the vendor part of the tuple used by Crosstool-NG
to "buildroot".
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Instead of providing two variables, make GNU_TARGET_NAME give the real
target name, and remove REAL_GNU_TARGET_NAME altogether.
Signed-off-by: Richard Braun <rbraun@sceen.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Decimal floats were introduced circa gcc-4.2 or -4.3, and requires
the floating-point environement fenv.h in the C library.
The uClibc .config file used by crosstool-NG to build uClibc is the
same as used by the internal buildroot mechanism, and explcitly
disables fenv support.
The quick workaround is to simply disable decimal floats in all
crosstool-NG config files.
In the long run, it might be better to check this situation, and/or
add code and/or options in crosstool-NG to handle this (but it is
much more involved, and this workaround is sane).
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
CC: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Update the version of crosstool-Ng used, bump to 1.15.2.
Also, update the bundled config files to match the new version.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Commit 0729b544b3 (Improve external toolchain logic to support IA32
Sourcery CodeBench toolchain) and e1f0804cc (external-toolchain: add
support for recent Linaro toolchains) changed the interface of
copy_toolchain_lib_root, but ctng wasn't updated so libraries weren't
copied to the target.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Update the version in the package description. Update the default
configuration files for the three different C libraries.
[Peter: Removed unneeded changes as noticed by Baruch Siach]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bundled config files have architecture-specific values in them,
which may break if buildroot is configured with another architecture
that does not forcibly set these option.
For example, the bundled config files are for x86_64, and define:
CT_ARCH_TUNE="generic"
This comes from the BR2_GCC_TARGET_TUNE config option (in buildroot) that
is set accordingly to the selected (arch,sub-arch).
But if someone configures buildroot for, say, generic ARM, then the
BR2_GCC_TARGET_TUNE config option is not set, and the crosstool-NG backend
Makefile believes it should not be pushed down to the crosstool-NG config
file.
BUT...
The crosstool-NG backend Makefile can not forcibly push BR2_GCC_TARGET_TUNE
down to the CT-NG config file. If BR2_GCC_TARGET_TUNE is empty, the user can
still set CT_ARCH_TUNE by running ctng-menuconfig.
The backend Makefile already passes such values only if they are set.
In the end, we can't push options as-is to the crosstool-NG config, but we
MUST provide sane bundled config files, which this patch does.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Update the crosstool-NG libc-specific config files to match the
new set of options coming with the updated crosstool-NG.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Remove the BR option and enable the configuration setting in the
uClibc defconfigs.
The BR2_PROGRAM_INVOCATION option only adds very little overhead to
uClibc, and we have a number of packages needing it, so simply always
enable it - Simplifying the kconfig logic and the number of choices
users have to make.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Move crosstool-NG to package/ and make it an autotarget package.
This requires a new patch (now upstream).
Now, the crosstool-NG toolchain backend only contains enough to build
the toolchain, there's no more reference to building crosstool-NG as
a package.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
On "make source", just download the required sources, and do not
build the entire toolchain. This requires a new patch against
crosstool-NG (got from upstream).
The "uclibc-source" rule requires an installed and configured
crosstool-NG, so it has to be after the variables declaration.
For consistency, move down the main rule "uclibc".
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Peter on IRC reported some build failures for different targets.
They were of two kinds:
- missing/unknown stack unwinding support
- missing *_chk functions
The first is about configure not being able to automagically determine
if stack unwinding support is available for the target. The second is
about fortified build forgetting to build the fortified functions.
This applies to both glibc and eglibc.
After some discussions on IRC with Jacmet, it appears that we can
safely assume both of the following:
- virtually all targets of buildroot will have stack unwinding support
- we do not care about fortified builds (so far)
So, update the bundled crosstool-NG .config file to saner defaults:
- force unwind support
- disable fortified builds
[Peter: fix 'force non-fortified build' sed invocation]
Reported-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
1.11.3 is the latest stable version, and it has a few improvements
we'll find usefull. For example, it hasa a boolean option for
disabling the {,e}glibc fortified build (instead of requiring us
to shoehorn it in extra cflags.
Update the config files.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Currently, the bundled CT-NG config file has no C library configured.
It is quite complex to add and/or munge options in this case.
Now, with one config file per libc familly, it becomes easier.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Depending on some setting (which? Arch? Others?), the dynamic linker
can get different names. Some times, it is named ld-linux.something.so,
other times, it is ld.so.1, and maybe other variants as well...
The fix is to always copy ls*.so, even if it is a symlink: we create
the destination file by its SONAME, and if ld*.so matches more than
one file, that's no issue, as they would all get the same SONAME (being
symlinks ones to the others).
Split long lines at the same time.
Reported-by: Ettore Campion <ecampion@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
At the same time, also use the new upstream location.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
We have to ensure that the sysroot created while building the
toolchain will be the one we later search for libraries. So:
- hide the sysroot name prompt from the ct-ng menu.
- force the sysroot name to be 'sysroot'.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Update the default .config file.
Remove now unnecessary patches.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As pointed out on the list, using sysroot rather than sys-root is less
confusing, as this is how it is referred to in the GCC manual.
So rather than changing BR, patch ct-ng to use sysroot instead.
The next ct-ng release will use 'sysroot' as well by default.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
crosstool-ng would normally delete its installation directory before
installing the toolchain to ensure it wouldn't get confused by an earlier
build. Now that we're installing directly into HOST_DIR/usr, this doesn't
work very well - So get rid of the rm's.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
