Tested on a Raspberry PI4 with a SNOM 360 and a SIP Trunk to Easybell.
Attention: chan_sip is deprecated, use chan_pjsip instead.
For chan_pjsip you need to enable openssl otherwise the module will not
load.
Patches 0005 and 0006 are applied upstream.
Remove unused configure options:
--without-curses
--without-isdnnet
--without-misdn
--without-nbs
--without-oss
--without-sqlite
--without-suppserv
--without-termcap
--without-tinfo
--without-vpb
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Much like flutter-pi, this package is a Flutter embedder used to run Flutter
applications. However, unlike Flutter-pi, this package requires a Wayland
compositor to run, which flutter-pi does not support. Furthermore, flutter-pi
lacks several plugins and features that ivi-homescreen supports, such as:
- Dart VM console redirection
- DLT logging
- Accessibility
- Compositor region
- Compositor surface
- Desktop Window
- Go Router
- Isolate
- Keyboard Manager
- Layer Playground
- Mouse Cursor
- PackageInfo
- Platform
- Platform Views
- Restoration
The following plugins and options are hardcoded to off:
- Crash handler: Requires a newer version of sentry-native.
- File selector: Requires the zenity package.
- Firebase-core: Requires the firebase-cpp-sdk package.
- URL Launcher: Requires a runtime-dependency on xdg-open.
- BUILD_TEXTURE_NAVI_RENDER_EGL: Failes to build.
- BUILD_TEXTURE_TEST_EGL: Fails to build.
- ENABLE_AGL_CLIENT: Used for Automitve Grade Linux (AGL).
The ENABLE_XDG_CLIENT=ON option is a requirement to run Flutter apps.
If this option is disabled, ivi-homescreen segfaults when starting an
application.
Finally, there is a need for a patch that fixes the audio-players plugin:
If the audio-players plugin is the only plugin selected, several compilation
errors occure because of undeclared definitions, as the standard_method_codec.h
header file is missing.
Upstream-status: https://github.com/toyota-connected/ivi-homescreen/pull/133
This package has been tested on a x86_64 host with an AMD Ryzen 9 6900HS
with Docker 24.0.5:
- The following distributions:
- Fedora 39: Host system
- Ubuntu 22.04: Docker
- Debian 11: Docker
- The following targets:
- BR2_aarch64
- BR2_arm
- BR2_x86_64
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
[yann.morin.1998@free.fr:
- propagate BR2_PACKAGE_HOST_FLUTTER_SDK_BIN_ARCH_SUPPORTS to comments
- drop NPTL, implied by glibc
- reorder dependencies in a more logical way
- reorder comments
- drop undefined BR2_PACKAGE_IVI_HOMESCREEN_HAS_CLIENT
- grammar ("for to change")
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The RealTime Linux Analysis tool includes a set of commands that relies
on the osnoise and timerlat tracers from the ftrace kernel subsystem,
allowing to analyze the lantency sources coming from the hardware and
the kernel itself.
This tool was introduced in v5.17 but until v5.19 it relied on libprocps
that has been deprecated soon. So let's make it available for v5.19+.
Rtla relies on libtracefs and libtraceevent, although libtraceevent itself
is already a dependency for libtracefs.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
[Giulio: fix install on recent Linux versions]
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
[Andreas: deal with Linux Fixups, musl, SSP]
Signed-off-by: Andreas Ziegler <br015@umbiko.net>
[yann.morin.1998@free.fr: reword and extend help text]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Introduce the libtracefs library, that is used to be bundled with the
trace-cmd tool. This library is now used by several tools and libraries
such as trace-cmd and rtla, and is used as an interface to the ftrace
kernel subsystem through tracefs.
To build with meson, this package requires to disable documentation
generation, and since this is not possible add a local patch pending
upstream that adds -Ddoc=false support to libtracefs.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
[Giulio:
- bump version to 1.7.0 and add hash file
- move to meson build system
]
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Introduce the libtraceevent library, that is used to be bundled with the
trace-cmd tool. This library is now used by several tools and libraries
such as trace-cmd, libtracefs and rtla.
To build with meson, this package requires to disable documentation
generation, and since this is not possible add a local patch pending
upstream that adds -Ddoc=false support to libtraceevent.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
[Giulio:
- bump version to 1.7.3 and add hash file
- move to meson build system
]
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
[yann.morin.1998@free.fr:
- bump to 1.8.1, drop patch applied upstream
- add "homepage" to help text
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
I will only be supporting Flutter and other packages needed by Amarula Solution
in a professional related capacity from now on.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
I will only be supporting Buildroot in a professional capacity from now on.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
ml_dtypes is a stand-alone implementation of several NumPy
dtype extensions used in machine learning libraries.
https://github.com/jax-ml/ml_dtypes
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This is the default terminal sway uses.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
[yann.morin.1998@free.fr: add comment only for first-order deps]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The traditional dmenu is only running under X; dmenu-wayland is an
implementation that runs only on (some) wayland compositors; Sway
uses it by default as its menu bar.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
[yann.morin.1998@free.fr:
- _SYNC_4 is an arch dependency, so comment should be hidden
- add a few missing comments for first-level dependencies
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This defconfig enables edk2 UEFI shell and grub2 riscv64-efi boot
of a Linux Kernel.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Upstream changed the package name and its github repo:
44df6e08cc
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This runtime test verifies the existence of the tftpy module when
selected.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Substitute spaces with tab on 2 entries for consistency.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch adds support for Xilinx Kria KD240 starter kit.
KD240 features can be found here:
https://www.xilinx.com/products/som/kria/kd240-drives-starter-kit.html
While the Kria SOM is based on a ZynqMP SoC, there are some key
boot config differences from the other ZynqMP evaluation boards.
1. There are no boot switches on Kria SOMs. The boot mode is thus
hard configured for QSPI flash. A pre-programmed boot.bin comes
with every Starter Kit. U-Boot can then find the Linux kernel and
file system on the SD card.
Optional instructions for updating the boot.bin in the QSPI flash
can be found in the readme.txt file and the link below.
https://xilinx-wiki.atlassian.net/wiki/spaces/A/pages/1641152513/Kria+K26+SOM
2. Kria SOMs use UART1 for the console instead of UART0. For this
reason, Kria Starter Kits will use a separate extlinux.conf file
from other ZynqMP evaluation boards.
3. The KD240 has a USB to SD card bridge, so the Linux kernel
and file system are found on /dev/sda1 and /dev/sda2.
4. The following patches have been submitted upstream to u-boot.
Without these patches, the usb, sd card and ethernet peripherals
do not work correctly.
https://patchwork.ozlabs.org/project/uboot/patch/20231213134007.2818069-1-neal.frager@amd.com/https://patchwork.ozlabs.org/project/uboot/patch/20231213134052.2818879-1-neal.frager@amd.com/
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
[Peter: add upstream tag, drop patch numbering from patches]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch adds support for ZynqMP ZCU104 evaluation board.
ZCU104 features can be found here:
https://www.xilinx.com/products/boards-and-kits/zcu104.html
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The zynq_qmtech_defconfig has not been maintained for 3 years, and is now
using a very out of date u-boot and Linux kernel. Since there are 4 other
zynq7000 defconfigs available in buildroot and Julien no longer has a
functional board, drop the defconfig.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Acked-by: Julien Olivain <ju.o@free.fr>
[Peter: reword commit message]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch adds support for Xilinx Kria KR260 starter kit.
KR260 features can be found here:
https://www.xilinx.com/products/som/kria/kr260-robotics-starter-kit.html
While the Kria SOM is based on a ZynqMP SoC, there are some key
boot config differences from the other ZynqMP evaluation boards.
1. There are no boot switches on Kria SOMs. The boot mode is thus
hard configured for QSPI flash. A pre-programmed boot.bin comes
with every Starter Kit. U-Boot can then find the Linux kernel and
file system on the SD card.
Optional instructions for updating the boot.bin in the QSPI flash
can be found in the readme.txt file and the link below.
https://xilinx-wiki.atlassian.net/wiki/spaces/A/pages/1641152513/Kria+K26+SOM
2. Kria SOMs use UART1 for the console instead of UART0. For this
reason, Kria Starter Kits will use a separate extlinux.conf file
from other ZynqMP evaluation boards.
3. The KR260 has a USB to SD card bridge, so the Linux kernel
and file system are found on /dev/sda1 and /dev/sda2.
Signed-off-by: Neal Frager <neal.frager@amd.com>
[Peter: fix kr260.sh shellcheck warnings, similar to kv260.sh]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
I am no longer work at Synopsys, so remove this email address.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch adds support for Xilinx Zynq ZC702 starter kit.
ZC702 features can be found here:
https://www.xilinx.com/products/boards-and-kits/ek-z7-zc702-g.html
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Used with the latest version of python-constantly. It is only needed as a
host package.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
This package is currently used in Fedora39 to provide python bindings
for kmod, and it is Python 3.12.0 compatible.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
[yann.morin.1998@free.fr: LGPL in in COPYING.LESSER]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This test case runs firewalld using both system and sysvinit.
run `firewalld-cmd --state` and ensure the output is "running" with a return
code of 0.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Upstream suggests to use it as a static library only, so follow that
principle.
Signed-off-by: Alessandro Partesotti <a.partesotti@gmail.com>
[Arnout:
- keep DEVELOPERS alphabetical;
- use oatpp for the prompt;
- add threads to the toolchain dependencies comment;
- move comment after the main prompt;
- rewrap the help text;
- empty line before upstream URL;
- hash comment Locally calulated instead of pointing to upstream
tarball URL;
- change hash to sha256;
- add hash for license file;
- reorder variables in .mk file;
- use _CONF_OPTS instead of invalid _CMAKE_OPTS.
]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
This package defines a simple abstract interface for playing event sounds.
It is mainly used by desktop applications such as GDM and GNOME Session.
http://0pointer.de/lennart/projects/libcanberra/
Signed-off-by: Takumi Takahashi <takumiiinn@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This update is required to install the latest version of the GNOME desktop.
Currently, only gvfs depends on this package, and we have confirmed that
gvfs can be built.
Signed-off-by: Takumi Takahashi <takumiiinn@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
eza is a modern, maintained replacement for ls, built on exa.
https://github.com/eza-community/eza.git
Signed-off-by: Saeed Kazemi <kazemi.ms@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
procs is a modern replacement for ps written in Rust
https://github.com/dalance/procs.git
Signed-off-by: Saeed Kazemi <kazemi.ms@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This should have been part of commit
9a51a07a91 ("configs/sipeed_licheepi_nano:
new board")
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
tftpy is described as a pure Python implementation of the Trivial FTP
protocol. Add support for this package.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
EditorConfig [0] is an editor-agnostic configuration file, to set
preferences on how to edit text: tabs vs. spaces, tab width, indentation
size, line endings...
A large number of editors support EditorConfig, either natively [1] or
with the help of plugins [2].
Add a basic .editorconfig that provides defaults for most of the files
used by Buildroot. More can be added in the future if we can find more
matching patterns.
The values are chosen a bit arbitrarily, unless we already have a
(un)written rule about it. Notably, indentation defaults to using 4
spaces, and only a set of files for which we require TABs (Makefile,
essentially) or have already settled for TABs (Kconfig files, init
scripts...) are configured so. The traditional width of TABs is 8 char,
and we pair TAB indentation with TAB size.
Trailing spaces are usually useless, except in asciidoc source where
they can be used to force a new line without a new paragraph.
One of the limitations of .editorconfig, though, is that it matches on
filenames (e.g. *.py), not on the content (e.g. no use of mimetype, or
libmagic, or such). Still, this is enough to cover a lot of files in
Buildroot.
[0] https://editorconfig.org/
[1] https://editorconfig.org/#pre-installed
[2] https://editorconfig.org/#download
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Checkpoint/Restore In Userspace (CRIU), is a software tool for the
Linux operating system to make it possible to freeze a running
application and checkpoint it to persistent storage as a collection of files.
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
[yann.morin.1998@free.fr:
- BR2_ARM_CPU_ARMV8M does not exist
- BR2_BR2_powerpc64le misspelled
- move all arch dependencies to BR2_PACKAGE_CRIU_ARCH_SUPPORTS
- comment hidden with arch dependencies
- select host-python3, don't depend on it
- extend legal-info: LPLG-2.1 for lib/, MIT for images/
- PREFIX is also used at compile time for PLUGINDIR
- copy .proto file, rather than symlinking
- wrap long lines
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
zenoh-pico is the Eclipse zenoh implementation that targets constrained
devices and offers a native C API. It is fully compatible with its main
Rust Zenoh implementation, providing a lightweight implementation of
most functionalities.
https://github.com/eclipse-zenoh/zenoh-pico
Signed-off-by: Alex Michel <alex.michel@wiedemann-group.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
CuteKeyboard is a Qt virtual keyboard plugin for embedded applications
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Acked-by: Andrea Ricchi <andrea.ricchi@amarulasolutions.com>
[Arnout:
- add DEVELOPERS entry;
- fixed the title in the .mk file;
- use select instead of depends on;
- with the above, add depends on QT5 and QT5_JSCORE.
]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
These headers are required to build the pacakge spirv-tools which is
requried by mesa3d for building rusticl:
https://docs.mesa3d.org/rusticl.html
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Sebastian Weyer <sebastian.weyer@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
host-rust-bindgen will be required to build several different rust-based
packages, including a Linux kernel with rust modules and mesa3d's
rusticl which is the rust-based implementation of OpenCL.
The Cargo.toml file at the project root is a "virtual manifest". Since
we only want to install rust-bindgen, we can specify RUST_BINDGEN_SUBDIR
= bindgen-cli to use the Cargo.toml from this directory.
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Sebastian Weyer <sebastian.weyer@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
