This commit fixes the warnings reported by check-package on the help
text of all package Config.in files, related to the formatting of the
help text: should start with a tab, then 2 spaces, then at most 62
characters.
The vast majority of warnings fixed were caused by too long lines. A
few warnings were related to spaces being used instead of a tab to
indent the help text.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The libav version built into the gst-ffmpeg code produces a bogus
binary on SPARC, which causes the following error of the
check-bin-arch script:
ERROR: architecture for ./usr/lib/gstreamer-0.10/libgstffmpeg.so is Sparc v8+, should be Sparc
ERROR: architecture for ./usr/lib/gstreamer-0.10/libgstpostproc.so is Sparc v8+, should be Sparc
ERROR: architecture for ./usr/lib/gstreamer-0.10/libgstffmpegscale.so is Sparc v8+, should be Sparc
The problem is the following bit of code in
gst-lib/ext/libav/configure:
elif enabled sparc; then
enabled vis && check_asm vis '"pdist %f0, %f0, %f0"' -mcpu=ultrasparc &&
add_cflags -mcpu=ultrasparc -mtune=ultrasparc
I.e, it checks if the architecture supports the pdist
instruction... but forces -mcpu to ultrasparc while doing so. So it's
like "let's see if this Ultrasparc instruction exists when I force the
compiler to think I'm using Ultrasparc", which is non-sensical. This
has been fixed later on in libav upstream:
https://git.libav.org/?p=libav.git;a=commit;h=6aa93689abe8c095cec9fa828c2dee3131008995
However, this commit cannot be backported as-is since the shell
function check_inline_asm did not exist in the old libav version
bundled in gst-ffmpeg.
Therefore, we take the simpler route of disabling the VIS
optimizations on SPARCv8 and Leon3.
Fixes:
http://autobuild.buildroot.net/results/e82d179c3d4f92ad7423693a4b1d42379a3f5411/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We want to use SPDX identifier for license string as much as possible.
SPDX short identifier for LGPLv2/LGPLv2+ is LGPL-2.0/LGPL-2.0+.
This change is done using following command.
find . -name "*.mk" | xargs sed -ri '/LICENSE( )?[\+:]?=/s/LGPLv2(\+)?/LGPL-2.0\1/g'
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We want to use SPDX identifier for license string as much as possible.
SPDX short identifier for LGPLv3/LGPLv3+ is LGPL-3.0/LGPL-3.0+.
This change is done using following command.
find . -name "*.mk" | xargs sed -ri '/LICENSE( )?[\+:]?=/s/LGPLv3(\+)?/LGPL-3.0\1/g'
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We want to use SPDX identifier for license string as much as possible.
SPDX short identifier for LGPLv2.1/LGPLv2.1+ is LGPL-2.1/LGPL-2.1+.
This change is done using following command.
find . -name "*.mk" | xargs sed -ri '/LICENSE( )?[\+:]?=/s/LGPLv2.1(\+)?/LGPL-2.1\1/g'
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We want to use SPDX identifier for license string as much as possible.
SPDX short identifier for GPLv3/GPLv3+ is GPL-3.0/GPL-3.0+.
This change is done using following command.
find . -name "*.mk" | xargs sed -ri '/LICENSE( )?[\+:]?=/s/\<GPLv3\>/GPL-3.0/g'
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We want to use SPDX identifier for license strings as much as possible.
SPDX short identifier for GPLv2/GPLv2+ is GPL-2.0/GPL-2.0+.
This change is done by using following command.
find . -name "*.mk" | xargs sed -ri '/LICENSE( )?[\+:]?=/s/\<GPLv2\>/GPL-2.0/g'
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Compilation triggers an ICE in gcc with gcc <= 4.9 using this defconfig
BR2_sh=y
BR2_TOOLCHAIN_BUILDROOT_WCHAR=y
BR2_PACKAGE_GSTREAMER=y
BR2_PACKAGE_GST_FFMPEG=y
BR2_PACKAGE_GST_FFMPEG_GPL=y
The problem is known upstream, a fix was never committed to gcc <= 4.9:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=65151
Compiling gst-ffmpeg with gcc5 works fine using this defconfig:
BR2_sh=y
BR2_TOOLCHAIN_BUILDROOT_WCHAR=y
BR2_GCC_VERSION_5_X=y
BR2_PACKAGE_GSTREAMER=y
BR2_PACKAGE_GST_FFMPEG=y
BR2_PACKAGE_GST_FFMPEG_GPL=y
This patch adds a dependency to gcc >= 5.x to fix the problem as
suggested by Thomas:
http://lists.busybox.net/pipermail/buildroot/2016-February/152584.html
Fixes
http://autobuild.buildroot.net/results/939/939da0c7771ddd97c05cedc0a7afc0ad34a21312/
[Peter: fix ML link, simplify kconfig, add comment explaining why]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that IPv6 is mandatory remove package dependencies and conditionals
for it.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that largefile is mandatory removes package dependencies and
conditionals.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Autogenerated from rename-patch.py (http://patchwork.ozlabs.org/patch/403345)
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since a while, the semantic of BR2_PREFER_STATIC_LIB has been changed
from "prefer static libraries when possible" to "use only static
libraries". The former semantic didn't make much sense, since the user
had absolutely no control/idea of which package would use static
libraries, and which packages would not. Therefore, for quite some
time, we have been starting to enforce that BR2_PREFER_STATIC_LIB
should really build everything with static libraries.
As a consequence, this patch renames BR2_PREFER_STATIC_LIB to
BR2_STATIC_LIBS, and adjust the Config.in option accordingly.
This also helps preparing the addition of other options to select
shared, shared+static or just static.
Note that we have verified that this commit can be reproduced by
simply doing a global rename of BR2_PREFER_STATIC_LIB to
BR2_STATIC_LIBS plus adding BR2_PREFER_STATIC_LIB to Config.in.legacy.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
- Change URL to gst-ffmpeg page at the gstreamer site.
- Note that gst-ffmpeg actually uses libav, not ffmpeg [anymore].
- Note that gst-ffmpeg is using an internal copy of libav, not a
system copy.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The internal copy of libav in gst-ffmpeg does not understand the
PKG_CONFIG env variable, so it throws a line like this at the end
of its configuration:
WARNING: .../output/host/usr/bin/i686-pc-linux-gnu-pkg-config not found, library detection may fail.
This patch adds the --pkg-config to let libav know where it is.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Tested-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Contrary to the ffmpeg package, the gst-ffmpeg package was only
allowing ARMv6 optimizations on ARMv6 platforms. This commit also
allows ARMv6 optimizations on ARMv7 platforms, like the ffmpeg package
does.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Instead of using the Config.in options for each individual ARM core,
use the newly introduced BR2_ARM_CPU_ARM* options, which exist per ARM
architecture.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
To be consistent with the recent change of FOO_MAKE_OPT into FOO_MAKE_OPTS,
change remaining occurrences of _OPT into _OPTS.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To be consistent with the recent change of FOO_MAKE_OPT into FOO_MAKE_OPTS,
make the same change for FOO_CONF_OPT.
Sed command used:
find * -type f | xargs sed -i 's#_CONF_OPT\>#&S#g'
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: rename existing patch and the one added by Arnout to follow
the patch naming convention.]
Cc: Marco Trapanese <marcotrapanese@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The toolchain currently doesn't build for nommu ARM and is in need of
serious work.
Problem is there are no emulation targets and real ARM(7TDMI/720T/740T)
hardware that's capable of running linux (enough memory, having a
memory controller...) is VERY rare and uses very old versions to
make it usable.
The ARM nommu focus should go into Cortex M series processors that are
obtainable at reasonable cost on modern hardware that has external
memory controllers.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts commit 7e558aa0d8.
Now that -mtext-section-literals is specified in the xtensa ABI this fix
is no longer needed.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since commit 6ea49a23df (gst-ffmpeg: Use internal libav instead of external
ffmpeg) gst-ffmpge uses its internal libav. This requires the same fix for
xtensa like ffmpeg got in commit 4ec35e76b8 (ffmpeg: fix build for xtensa).
Fixes
http://autobuild.buildroot.net/results/08a/08a27891fd5336250f00e611a15ea45505985f67/.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Proposed-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When a package A depends on config option B and toolchain option C, then
the comment that is given when C is not fulfilled should also depend on B.
For example:
config BR2_PACKAGE_A
depends on BR2_B
depends on BR2_LARGEFILE
depends on BR2_WCHAR
comment "A needs a toolchain w/ largefile, wchar"
depends on !BR2_LARGEFILE || !BR2_WCHAR
This comment should actually be:
comment "A needs a toolchain w/ largefile, wchar"
depends on BR2_B
depends on !BR2_LARGEFILE || !BR2_WCHAR
or if possible (typically when B is a package config option declared in that
same Config.in file):
if BR2_B
comment "A needs a toolchain w/ largefile, wchar"
depends on !BR2_LARGEFILE || !BR2_WCHAR
[other config options depending on B]
endif
Otherwise, the comment would be visible even though the other dependencies
are not met.
This patch adds such missing dependencies, and changes existing such
dependencies from
depends on BR2_BASE_DEP && !BR2_TOOLCHAIN_USES_GLIBC
to
depends on BR2_BASE_DEP
depends on !BR2_TOOLCHAIN_USES_GLIBC
so that (positive) base dependencies are separate from the (negative)
toolchain dependencies. This strategy makes it easier to write such comments
(because one can simply copy the base dependency from the actual package
config option), but also avoids complex and long boolean expressions.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(untested)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch lines up the comments in Config.in files that clarify which
toolchain options the package depends on.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Unless it was a group of sub-packages, packages was never regrouped by
category. multimedia/ was an exception to this rule.
This patch move packages/multimedia/ sub-directories to packages/. It
keeps two subdirectories for gstream 0.10 and gstreamer 1.X.
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
