This commit adds basic configuration files for the Firefly RK3288 board.
Both minimal and demo defconfigs are added. The latter enables Qt5 with
the required Mali T76X GPU user space components.
More info about the board:
http://en.t-firefly.com/en/firenow/firefly_rk3288/specifications/
[Peter: use same-as-kernel for kernel headers]
Signed-off-by: Ariel D'Alessandro <ariel@vanguardiasur.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As a followup to http://patchwork.ozlabs.org/patch/548550/ fully convert
the versatile defconfig to create the dtb and update the instructions.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This config has no prospect of going into the future (by using DTS), and
qemu doesn't do a good job at emulating it (networking problems), so
drop it.
All of the ARM SMP testing duties are now in the vexpress defconfig
which is better suited/supported.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We can use the vexpress arm defconfig to test SMP features in Qemu.
So document the necessary invocation changes to account for this, in
preparation of the arm nuri defconfig removal.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Keep arm_nuri on 3.10.x for the usual reasons.
Keep mips & mipsel (32 bits) on 4.3.x because 4.4.x fails to boot
properly (kernel stuck after the CPU cache info).
Results table:
Defconfig Kernel Qemu Network Status
--------------------------------------------------------------
aarch64_virt 4.4.1 2.3.0 YES OK
arm_nuri 3.10.96 2.3.0 YES(1) OK most times(2)
arm_versatile 4.4.1 2.3.0 YES OK
arm_vexpress 4.4.1 2.3.0 YES OK
microblazebe 4.4.1 2.3.0 YES OK
microblazeel 4.4.1 2.3.0 YES OK
mips64el_malta 4.4.1 2.3.0 YES OK
mips64_malta 4.4.1 2.3.0 YES OK
mipsel_malta 4.3.5 2.3.0 YES OK (4)
mips_malta 4.3.5 2.3.0 YES OK (4)
ppc_g3beige 4.4.1 2.3.0 YES OK
ppc_mpc8544ds 4.4.1 2.3.0 YES OK
ppc_virtex_ml507 4.4.1 2.3.0 NO OK
ppc64_pseries 4.4.1 2.3.0 YES OK
sh4 4.4.1 2.3.0 YES OK
sh4eb 4.4.1 2.3.0 NO(3) OK
sparc_ss10 4.4.1 2.3.0 YES OK
sparc64_sun4u 4.4.1 2.3.0 YES OK
sparc_sun4u 4.4.1 2.3.0 YES OK
x86 4.4.1 2.3.0 YES OK
x86_64 4.4.1 2.3.0 YES OK
xtensa_lx60 4.4.1 2.3.0 YES OK
(1) - Supposed to work but broken, probably Qemu emulation issue
(2) - In like 1/3 starts it fails to work properly
(3) - Probably an endian issue with 8139 emulation/driver
(4) - Kernel stuck at cpu cache details from 4.4 - 4.4.1
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The file that is actually produced is called u-boot-spl.bin, not
uboot-spl.bin.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Juno ARM Development Platform (ADP) is a software development
platform for ARMv8-A, it includes the Juno Versatile Express board
and an ARMv8-A reference software port available through Linaro.
Signed-off-by: Joao Pinto <jpinto@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also updating the documentation with the dd instruction to flash the
bootable media.
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Peter: use tarball for Linux kernel, use 4.4 kernel headers]
Signed-off-by: Eelco Chaudron <echaudron@xiot.nl>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is the 21st century, so enable SMP for them.
[Peter: add note to readme.txt about how emulate a SMP system in QEMU]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Update the raspberrypi and raspberrypi2 configs to use genimage directly
to build the image.
Update the documentation to reflect this, and drop the volatile rootfs
option since it doesn't make much sense and it's not easily integrated
with the genimage configurations.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch updates the Cubieboard2 board defconfig to use newer u-boot
and linux versions, along with a few other improvements.
The other improvements were mostly backported from the recent Orange Pi
defconfig inclusion and are related to image generation.
linux-sunxi.org was used as a reference for both linux and u-boot
defconfig names.
In detail:
- Update linux to vanilla upstream -- currently 4.3.3 is the most
up-to-date. Although it lacks some features present only in the
linux-sunxi 3.4 branch, upstream support appears to be relatively mature
and is already being deployed by default by distributions such as Arch
Linux ARM.
- Update u-boot to vanilla upstream 2015.10. According to
linux-sunxi.org, upstream fully supports major functions (except NAND)
since 2015.07.
- Change image format to zImage and drop custom image generation script
in favour of genimage, as pointed out by reviewers in the Orange Pi
defconfig submission.
This was tested in a Cubieboard2 board with boot from mmc and it boots
fine to login prompt.
This has not been tested in a Cubieboard (A10) as I don't own any; the
version bumps probably apply to it although there are some differences
(lack of VFPv4 support, Cortex-A8 instead of Cortex-A7), so I have kept
the current Cubieboard defconfig and its scripts. This one has been only
build-tested.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds a configuration for the Orange Pi PC board,
<http://www.orangepi.org/orangepipc/>.
Signed-off-by: Eelco Chaudron <echaudron@xiot.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Documentation is referring to nandflash.txt which doesn't exist.
Instead, readme.txt provides the instructions to flash the NAND storage.
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Specify that the drive image file format is raw to avoid warnings and
restrictions.
Also switch to -drive syntax for all configs.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The arm_foundationv8_defconfig currently doesn't build because it uses
an external AArch64 toolchain that has been updated (Linaro toolchain)
and is now based on gcc 5.x. Unfortunately, Linux 3.13 is too old to
be built with gcc 5.x.
As a minimal fix to make this defconfig build again, we switch to use
the internal toolchain backend. At the time this defconfig was
introduced, there was no support for AArch64 in the internal toolchain
backend, but now that it is available, there is no reason to not use
it. This makes the defconfig also more consistent with the other
defconfigs.
Obviously, the kernel headers used to build the toolchain are set to
the fixed version 3.13, so that they match the kernel being used.
While we're at it, the readme.txt file corresponding to this defconfig
is updated. Runtime testing has been performed with the latest version
of the ARM Foundation model.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Created a readme.txt for the Intel Galileo Gen 1/2 that describes,
* How to build for the Intel Galileo Gen 1/2
* How to access the console on the Intel Galileo Gen 1/2
Signed-off-by: Ray Kinsella <ray.kinsella@intel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Board support package includes:
* Toplevel build root configuration
* Github based 3.8.7 Kernel
* Upstream 3.8.7
* Linux 3.8.7 Kernel Driver Patches
* Linux 3.8.7 configuration
* Grub configuration
* Init Script to load modules
* genimage config to create sdcard image.
[Thomas: simplify post-image script since there is now only one call
to genimage.]
Signed-off-by: Ray Kinsella <ray.kinsella@intel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It contained a typo that prevented the driver from being built.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that uclibc-ng was bumped to version 1.0.9 nothing prevents x86
from working correctly.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
By default, with the original patch bootcmd runs sdboot before loading uEnv.txt.
Consequently, if the user change modeboot, the user's defined content is updated
too late.
By loading uEnv.txt before 'run $modeboot' the correct boot mode is used instead
of default mode.
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Acked-By: Jan Viktorin <viktorin@rehivetech.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
ppc-mpc8544ds: switch to custom kernel config since the new 4.3-shipped
mpc85xx_basic_defconfig doesn't work with Qemu.
Incidentally while cleaning it up it now seems to work fine with newer
qemu versions.
sparc64_sun4u: ditch ne2k driver since it's useless, and add the e1000
driver which works fine.
x86: stick to 4.2.x kernels since 4.3 doesn't work right with uclibc
(any variant) based toolchains.
Results table:
Defconfig Kernel Qemu Network Status
--------------------------------------------------------------
aarch64_virt 4.3 2.3.0 YES OK
arm_nuri 3.10.93 2.3.0 NO(1) OK(2)
arm_versatile 4.3 2.3.0 YES OK
arm_vexpress 4.3 2.3.0 YES OK
microblazebe 4.3 2.3.0 YES OK
microblazeel 4.3 2.3.0 YES OK
mips64el_malta 4.3 2.3.0 YES OK
mips64_malta 4.3 2.3.0 YES OK
mipsel_malta 4.3 2.3.0 YES OK
mips_malta 4.3 2.3.0 YES OK
ppc_g3beige 4.3 2.3.0 YES OK
ppc_mpc8544ds 4.3 2.3.0 YES OK
ppc_virtex_ml507 4.3 2.3.0 NO OK
ppc64_pseries 4.3 2.3.0 YES OK
sh4 4.3 2.3.0 YES OK
sh4eb 4.3 2.3.0 NO(1) OK
sparc_ss10 4.3 2.3.0 YES OK
sparc64_sun4u 4.3 2.3.0 YES OK
sparc_sun4u 4.3 2.3.0 YES OK
x86 4.2.6 2.3.0 YES OK(3)
x86_64 4.3 2.3.0 YES OK
xtensa_lx60 4.3 2.3.0 YES OK
(1) - Supposed to work but broken, probably Qemu emulation issue
(2) - In like 1/3 runs it fails to start properly
(3) - linux 4.3.0 doesn't like uclibc-based toolchains (net issues)
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The i.MX6 SoloX SABRE board for smart devices is Freescale's reference design
board based on the heterogeneous ARM Cortex-A9 + Cortex-M4 i.MX6 SoloX
applications processor.
This defconfig is inspired from previous freescale_imx6*sabresd_defconfig, and
is based on Freescale "official" git repo on git.freescale.com and SW release
3.10.53_1.1.0_ga.
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Cc: Gary Bisson <bisson.gary@gmail.com>
Cc: Jérôme Pouiller <jezz@sysmic.org>
Cc: Gilles Talis <gilles.talis@gmail.com>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Virtualizer Development Kit (VDK) Family for ARM Cortex Products
consists of a set of virtual prototypes that provide a virtualizer for
the ARM core variants. The VDK is a standalone package that runs on an
host computer.
[Thomas: drop the following options, which as noted by Arnout, are not
needed:
- BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM=y
- BR2_LINUX_KERNEL_IMAGE_TARGET_NAME="Image"
- BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y.]
Signed-off-by: Joao Pinto <jpinto@synopsys.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also revamp the kernel config a bit to make it more featured, enabling
SATA ports and storage.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Enable the generic hda (sound) codec, necessary for qemu audio to work.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Enable the generic hda (sound) codec, necessary for qemu audio to work.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Changes:
* Update Kernel and U-Boot to the latest 2.0.6 BSP release from the
official sources.
* Add genimage config to create bootable SD card image
Signed-off-by: Gergely Imreh <imrehg@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
"/usr/bin/env bash" is used everywhere else in host tools. These are the
only remaining offenders.
Signed-off-by: Bjørn Forsman <bjorn.forsman@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump U-boot version to 2015.07 from the mainline repository. Since there
is SPL support for the wandboard in the U-boot 2015.07, it is now
possible to boot the same U-boot image for all wandboard variants
(solo/dual/quad).
Bump kernel version to 3.14.28_1.0.0 from the wandboard git repository.
Tested on Wandboard Solo, Wandboard Dual and Wandboard Quad.
Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com>
Tested-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Barebox, AT91Bootstrap and Linux patches for the Calao QIL A9260
board are all located in the same directory, board/calao/qil-a9260/,
with only a prefix to indicate to which component they apply.
Unfortunately, since commit 0eba4759fa
("packages: apply custom patches using *.patch instead of
<pkg>-*.patch"), the logic to apply custom patches in Barebox and
AT91Bootstrap has been changed from applying <package>-*.patch to
applying *.patch (in order to be consistent with what we do for all
packages in Buildroot).
However, this had the effect of trying to apply both the AT91Bootstrap
and Barebox patches on both packages, which obviously cannot work.
This commit fixes that by moving patches around, and switching to use
BR2_GLOBAL_PATCH_DIR for all of Barebox, AT91Bootstrap and Linux
patches.
In addition, the defconfig was not specifying explicitly which Barebox
version to use, so right now it's trying to use Barebox 2015.09, on
which the board-specific patch does not apply. So we've forced to use
Barebox 2012.08, which was the lastest release available at the time
the defconfig was initially contributed.
Cc: Gregory Hermant <gregory.hermant@calao-systems.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Both the Barebox and AT91Bootstrap patches for the Calao USB A9G20
board are located in the same directory, board/calao/usb-a9g20-lpw/,
with only a prefix making a difference between whether they apply to
Barebox or AT91Bootstrap.
Unfortunately, since commit 0eba4759fa
("packages: apply custom patches using *.patch instead of
<pkg>-*.patch"), the logic to apply custom patches in Barebox and
AT91Bootstrap has been changed from applying <package>-*.patch to
applying *.patch (in order to be consistent with what we do for all
packages in Buildroot).
However, this had the effect of trying to apply both the AT91Bootstrap
and Barebox patches on both packages, which obviously cannot work.
This commit fixes that by moving patches around, and switching to use
BR2_GLOBAL_PATCH_DIR.
Cc: Gregory Hermant <gregory.hermant@calao-systems.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This defconfig tries to fetch its kernel source code and U-Boot source
code from gitorious.org, which is not longer available. Therefore,
this defconfig has been failing to build since quite some time. Since
there's no obvious other place to grab the kernel and u-boot source
code, and the defconfig was not updated since a long time, let's
simply get rid of it.
[Peter: also drop README]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It is based on olimex_a20_olinuxino_lime configuration. Tested on the mainline
kernel 4.1.4. It boots and the Ethernet is working at speed 1 Gbps.
[Thomas: remove ccache and optimize 2 options.]
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
Acked-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Linux kernel 4.2 was finally released, so bumping from 4.2-rc5 to
final release.
Updating Linux headers to 4.2 branch since they are introduced in
Buildroot as well already.
Also adding 1 back-ported patch that makes SD/MMC cards usable on AXS
boards. This patch will be a part of 4.3 (already in linux-next) and
hopefully will make its way in 4.2.1.
Once that patch appears in 4.2.x it can be removed from here.
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Those scripts will support coming platforms such as iMX6SoloX or
iMX6QuadPlus.
One important change is that the bootscript now relies on U-Boot to
make the display detection in order to simplify the script.
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Changes are based on Zedboard: Xilinx does not provide a specific DTS
for Microzed in the kernel tree. It is suggested [1] to use the
zynq-zed.dts and change the RAM size
[1] https://forums.xilinx.com/t5/Embedded-Linux/Microzed-default-device-tree-dts/td-p/432856
[Thomas:
- extend readme.txt to indicate why the same DTB is used for Microzed
and the Zedboard.
- add a description + Signed-off-by line in the
0001-zynq-Create-microzed-specific-U-Boot-environment.patch, by
re-using the description of the same patch for the Zedboard.]
Signed-off-by: Davide Viti <d.viti@infosolution.it>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
