With the patchset "kconfig: turnaround into single .config"
[http://lists.denx.de/pipermail/u-boot/2015-February/205490.html]
U-Boot switched to a single .config file for board configuration. This
allows us to use the kconfig-package infrastructure.
For providing backward compatibility with older U-Boot version a user
choice between the new Kconfig and the legacy build system is
introduced.
[Thomas:
- make use of the legacy build system the default, to not break
existing configurations.
- add some comments in the code checking all the configuration
options, in order to hopefully make it a bit clearer.]
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit integrates generation of a bootable image
for Xilinx Zynq. The generation is independent on Xilinx
flow and utilizes the host-zynq-boot-bin package. The only
required step is to generate a proper U-Boot SPL (instead
of the FSBL).
The SPL generation might work when providing the working
ps7_init.c file to U-Boot. However, from U-Boot 2015.07
a set of generic ps7_init.c files is included and used to
build the U-Boot SPL for various boards. The ps7_init.c file
has been released under GNU/GPL license for this purpose.
For details, see
http://lists.denx.de/pipermail/u-boot/2015-April/210664.html
The SPL searchs for u-boot-dtb.img when booting so we
enforce using of the BR2_TARGET_UBOOT_FORMAT_DTB_IMG format.
[Thomas: remove select of BR2_PACKAGE_HOST_ZYNQ_BOOT_BIN, since this
option no longer exists.]
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Allow to generate u-boot-dtb.img. This is the same format
as u-boot.img, however, it contains a built-in device-tree.
This file is being loaded by the U-Boot SPL.
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Allow to generate 'u-boot.nand', Freescale i.MX28 BootStream format (.sb)
with a header for booting from NAND flash.
There are two possibilities when preparing an image writable to NAND flash:
1) The NAND was not written at all yet or the BCB (Boot Control Blocks) is
broken. In this case, the NAND image 'u-boot.nand' needs to written.
2) The NAND flash was already written with a good BCB. This applies after
'u-boot.nand' was correctly written. There is no need to write the BCB
again. In this case, the bootloader can be upgraded by writing 'u-boot.sb'.
To satisfy both cases 'u-boot.nand' as well as the make target 'u-boot.sb' are
copied to the binaries directory.
mxsboot for NAND images needs all three parameters typed in as integer values
(hex values do not work). The default values choosen are typical sizes for a
NAND flash.
For more information see:
http://www.denx-cs.de/doku/?q=m28evkrunuboot
Commit Note: This patch is based on top of
"[PATCH v2 1/2] boot/uboot: add support for i.MX28 SD format"
http://patchwork.ozlabs.org/patch/453116/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It's been deprecated since the 2014.05 release, so a year has passed.
Add legacy info as well to raise a warning when it's used.
[Peter: Remove entire config.h fixup handling]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
For custom tarballs, it's quite obvious we can not check hashes.
For custom versions, that's not so obvious. One might think we could
have hashes for all the official releases, but that's not possible: if
the user uses a released version of Buildroot (say 2015.05) much later
in the future, and wants to use the then-released 2038.02 U-Boot. It now
seems pretty obvious that Buildroot 2015.02 can't know the hash for
U-Boot 2038.02.
So, disable checking the hash for custom tarballs and custom versions.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Vincent Stehle <vincent.stehle@laposte.net>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Instead of manually testing MAKECMDGOALS, use the newly introduced
BR_BUILDING variable to know if we're building or not.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
The existing u-boot patch option only allowed directories to be
specified. This adds support for URLs using similar code as found
in linux/linux.mk. Local files are also handled now.
This change is useful for Intel Edison support, so that Intel's u-boot
patch can be downloaded rather than stored in the Buildroot source tree.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: fix issues noticed by Arnout:
- Rewrap the linux/Config.in paragraph
- Revert the "is a toolchain dependency" -> "has a toolchain
dependency" change from pkg-generic.mk, as the original was
correct.]
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Several packages have some logic to apply custom patches that existed
before the BR2_GLOBAL_PATCH_DIR mechanism: at91bootstrap,
at91bootstrap3, barebox, uboot and linux. Currently, the logic of
those packages to apply custom patches is to match
<package-name>-*.patch, which is not consistent with what we've done
for patches stored in the package directory, and for patches stored in
BR2_GLOBAL_PATCH_DIR: in such cases, we simply apply *.patch.
Therefore, for consistency reasons, this commit changes these packages
to also apply *.patch.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Allow to generate u-boot.sd, Freescale i.MX28 SB format with a header for
booting from an SD card.
U-boot includes an mxsboot tool to generate this format, starting from
v2011.12.
See u-boot doc/README.mxs (or doc/README.mx28_common before 2013.07).
[Arnout:
- Wrap Config.in help text at 72 columns.
- Remove v from U-Boot version specifier.
- Refer to different README name before 2013.07.
- Depend on host-elftosb
- Add comment to clarify sb -> sd conversion.]
Signed-off-by: Vincent Stehlé <vincent.stehle@freescale.com>
Tested-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This flag seems to be obsolete. There is no piece of code in the U-Boot source
tree referencing CONFIG_NOSOFTFLOAT.
Unfortunatly the use of this flag is not documented here. Maybe it's about this
old workaround:
http://lists.denx.de/pipermail/u-boot/2007-March/020282.html
However, this patch has been declined:
http://www.denx.de/wiki/view/U-Boot/PatchStatus?rev=1.27
Since no other configure options are used, remove also UBOOT_CONFIGURE_OPTS.
Signed-off-by: Jörg Krause <jkrause@posteo.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove the quotes from the BR2_TARGET_UBOOT_SPL_NAME variable.
Signed-off-by: Jörg Krause <jkrause@posteo.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To easy up adding optional parameters when calling the
"apply-patches.sh" add and use the "APPLY_PATCHES" variable to execute
the script.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Buildroot coding style defines one space around make assignments and
does not align the assignment symbols.
This patch does a bulk fix of offending packages. The package
infrastructures (or more in general assignments to calculated variable
names, like $(2)_FOO) are not touched.
Alignment of line continuation characters (\) is kept as-is.
The sed command used to do this replacement is:
find * -name "*.mk" | xargs sed -i \
-e 's#^\([A-Z0-9a-z_]\+\)\s*\([?:+]\?=\)\s*$#\1 \2#'
-e 's#^\([A-Z0-9a-z_]\+\)\s*\([?:+]\?=\)\s*\([^\\]\+\)$#\1 \2 \3#'
-e 's#^\([A-Z0-9a-z_]\+\)\s*\([?:+]\?=\)\s*\([^\\ \t]\+\s*\\\)\s*$#\1 \2 \3#'
-e 's#^\([A-Z0-9a-z_]\+\)\s*\([?:+]\?=\)\(\s*\\\)#\1 \2\3#'
Brief explanation of this command:
^\([A-Z0-9a-z_]\+\) a regular variable at the beginning of the line
\([?:+]\?=\) any assignment character =, :=, ?=, +=
\([^\\]\+\) any string not containing a line continuation
\([^\\ \t]\+\s*\\\) string, optional whitespace, followed by a
line continuation character
\(\s*\\\) optional whitespace, followed by a line
continuation character
Hence, the first subexpression handles empty assignments, the second
handles regular assignments, the third handles regular assignments with
line continuation, and the fourth empty assignments with line
continuation.
This expression was tested on following test text: (initial tab not
included)
FOO = spaces before
FOO = spaces before and after
FOO = tab before
FOO = tab and spaces before
FOO = tab after
FOO = tab and spaces after
FOO = spaces and tab after
FOO = \
FOO = bar \
FOO = bar space \
FOO = \
GENIMAGE_DEPENDENCIES = host-pkgconf libconfuse
FOO += spaces before
FOO ?= spaces before and after
FOO :=
FOO =
FOO =
FOO =
FOO =
$(MAKE1) CROSS_COMPILE=$(TARGET_CROSS) -C
AT91BOOTSTRAP3_DEFCONFIG = \
AXEL_DISABLE_I18N=--i18n=0
After this bulk change, following manual fixups were done:
- fix line continuation alignment in cegui06 and spice (the sed
expression leaves the number of whitespace between the value and line
continuation character intact, but the whitespace before that could have
changed, causing misalignment.
- qt5base was reverted, as this package uses extensive alignment which
actually makes the code more readable.
Finally, the end result was manually reviewed.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Cc: Yann E. Morin <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Following the issues reported by Jerry <g4@novadsp.com>, it appears
that there are a number of U-Boot configuration variables we are not
checking properly, leaving users with weird behavior at build time.
This commit extends the existing U-Boot checks to verify that when a
custom version, custom tarball, or custom Git or Mercurial
repositories are selected, the appropriate fields are not empty in the
configuration.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes#6986
Prior to u-boot 2013.10, the GPL license text was stored in COPYING and not
Licenses/gpl-2.0.txt, breaking legal-info.
Work around it by simply copying the file from the old location to the new
if present.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some boards are configured in u-boot to store multiple redundant copies of
the environment image in flash. For these boards, it is required to pass
the -r flag, when generating a boot environment image using mkenvimage.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Thomas: update to recent Buildroot, add missing dependency on
host-elftosb.]
Signed-off-by: Gary Coulbourne <bear@bears.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
On some platforms, the standard U-Boot binary is not called u-boot.bin,
but u-boot<something>.bin. This is for example the case on the
Cavium-provided u-boot, where the output file is called
u-boot_<boardname>.bin.
This patch adds a 'custom format' choice in the existing u-boot binary
format selection, where this name can be put. In the Cavium example, this
option could be set to:
BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot-$(BR2_TARGET_UBOOT_BOARDNAME).bin"
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To match the logic we have for BR2_LINUX_KERNEL_PATCH. The user has
already specified a custom patch directory, so we don't need to be
so specific about the what file names we accept, and it becomes quite
cumbersome when a custom git version is used.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This commit provides configuration options to automatically generate a
binary environment image for U-Boot.
Two options are available (and mandatory):
* the location of a text file describing U-Boot environment.
* the size of the environment.
[Peter: fix Config.in indentation + typo]
Signed-off-by: Arnaud Rébillout <rebillout@syscom.ch>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#5846
The $(dir ...) function leaves a slash at the end, so that the LINUX_SITE
variable for a custom tarball ends in a slash. The DOWNLOAD macro adds
another slash between SITE and SOURCE, which results in a double slash in
the download URL.
Fix this by stripping off the final slash from the _SITE in all packages that
have a custom tarball.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
For some platforms like OMAP, a new binary format is now being used
for u-boot: u-boot.img. It is basically u-boot.bin which has been
processed with mkimage.
Signed-off-by: Nicolas Dechesne <n-dechesne@ti.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
SPL is a first stage bootloader. On pandaboard it supercedes x-loader,
and should now be used.
This patch ensures that either SPL or xloader can be selected.
A config variable has been added for the name of the SPL binary generated
during u-boot build. For most platform it is u-boot-spl.bin but not always.
It is MLO on OMAP for example.
Signed-off-by: Nicolas Dechesne <n-dechesne@ti.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Frank Hunleth <fhunleth@troodon-software.com>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add support for the u-boot-nand.bin target file.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Thanks to the pkgparentdir and pkgname functions, we can rewrite the
GENTARGETS macro in a way that avoids the need for each package to
repeat its name and the directory in which it is present.
[Peter: pkgdir->pkgparentdir]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The name "patch-kernel.sh" is a bit stupid, since this script is used
to patch everything in Buildroot, not only kernel trees.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Move fw_printenv / fw_setenv options from the uboot bootloader build to
the uboot-mkimage package, and rename it to uboot-tools.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Commit a4ca959321 (u-boot: rename to uboot) forgot to change the kirkwood
format handling to look for the new variable name, breaking support.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As the kernel and bootloaders do not use the normal BR2_PACKAGE_*
Kconfig options, their target name was not automatically added to the
global TARGETS variable. Each bootloader .mk and the linux.mk had to
add their own target manually to TARGETS, and the package
infrastructure was making tests on non-existing Kconfig variables.
This commit improves the package infrastructure so that it looks at
BR2_PACKAGE_<pkg> for packages, BR2_TARGET_<pkg> for bootloaders and
at the special BR2_LINUX_KERNEL for the linux package.
This allows to simplify a little bit the bootloaders and linux .mk
files.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This will allow to match the currently Config.in option
BR2_TARGET_UBOOT, in order to make it easy to integrate U-Boot into
the package infrastructure.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
