The zxing package currently selects libiconv when locale support is not
available in the toolchain. This patch stops the zxing package selecting
libiconv. The zxing package now uses uses libiconv if it's available
otherwise iconv support is disabled in zxing.
Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop patches applied upstream.
Mark the rpi-backend as broken, since it segfaults.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Starting with 1.4.0, weston requires wayland-scanner to build its DT.
So far, we got away with just hand-building wayland-scanner, and made
that available in HOST_DIR/usr/bin
But now, weston also requires wayland's DTD, which we did not take care of
in our dirty little hack.
So, the best solution is to just build a host-variant of wayland, so
we get both wayland-scanner, and the DTD.
But then, we do not build the target wayland-scanner (he, wayland tries
to run it at build time...). So it is a matter of just tweaking a little
bit the host .pc file (which weston uses to find wayland-scanner, sigh...)
and fake it as a target .pc file.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Use CFLAGS from command line
- Remove "Check C compiler type (optimization options)"
This test force optimization to -O3
while it is already set in CFLAGS
- Don't use host CPP
- Remove "Check for Large File Support"
LFS support is already set in CFLAGS
Note: configure script still use host nm
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
infozip's Makefile expect $(AS) to output by default to <basename>.o
but when called from Buildroot, the value for $(AS) is set
to to invoke the toolchain's $(AS) directly, and the output of it
goes to a.out.
So, define $(AS) with $(CC -c)
Reported-by: Кирилл Луценко <lucenko_kirill@mail.ru>
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Starting with version 2.3.0, libroxml is now using autotools.
With autotools, the -Werror flag was dropped
-> no need for the patch libroxml-0001-werror.patch
With autotools, the availability of -Wno-*-unused is auto detected
-> no need for the patch libroxml-0002-wno-unused-result.patch
Signed-off-by: Tristan Lelong <tristan.lelong@blunderer.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
gnutls-01-gettime.patch was applied upstream, AUTORECONF is no longer
necessary.
The GNUTLS_LIBREGEX_CHECK_FIX didn't actually work before, because it was
overwritten by the autoreconf. It looks like things still work without
regex. However, this patch reinstates the regex support by setting
libopts_cv_with_libregex=yes in the environment.
Fixes http://autobuild.buildroot.net/results/b22/b22f2caa79f371c625939b65a88a2073382c5288
(failure in libvncserver) because gnutls.so is now properly linked with -lrt.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Peter: file header, structure like gst-ffmpeg, drop unneeded libav args]
Signed-off-by: Sven Neumann <neumann@teufel.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The gstreamer / gstreamer1 names are not directly obvious to outsiders, so
spell out the fact that they are about the 0.10 and 1.x versions.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Peter: s/Hangout/Hangouts/, line wrap]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 25926af5 disabled udev support for the host variant, but forgot to
remove it from the (implicit) host dependencies.
Also reordered things to keep the HOST_* definitions together.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Cset 9fa7f2b (pkg-cmake.mk: build shared library when !BR2_PREFER_STATIC_LIB)
broke rpi-userland.
Force not building shared libs for rpi-userland, since they are broken.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Samuel Martin <s.martin49@gmail.com>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Peter: move to hw menu, int type for nr modems, drop _BINARIES_DIR
variable, fix config file name]
Signed-off-by: Julien Boibessot <julien.boibessot@armadeus.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
cmake is the only build-system we support that does colour its output,
Also, since parallel builds generates intermixed output lines, it makes
for ugly-looking output.
Just disable cmake colouring globally.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
If the Buildroot tree is read-only, then $(TARGET_DIR_WARNING_FILE) is
copied read-only into target/ but we may want to remove it during the
build process.
This poses no real problem, since target/ itself is guaranteed to be
writable, but for good measure, force $(TARGET_DIR_WARNING_FILE) to be
writable itself.
Reported-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
If $(UCLIBC_CONFIG_FILE) is read-only (eg. because Buildroot's
source dir is), the sed fixups to .config fail.
Signed-off-by: Nathan Lynch <ntl@pobox.com>
[yann.morin.1998@free.fr: use $(INSTALL) instead of cp]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
If $(KERNEL_SOURCE_CONFIG) is read-only (eg. because Buildroot's source
dir is), the rm of $(KERNEL_ARCH_PATH)/configs/buildroot_defconfig will
either fail, or prompt the user, both of which we want to avoid.
Make it writable by using $(INSTALL).
Fixes: #4363
Signed-off-by: Nathan Lynch <ntl@pobox.com>
[yann.morin.1998@free.fr: use $(INSTALL) instead of cp, don't 'rm -f']
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
If $(BUSYBOX_CONFIG_FILE) is read-only (eg. because Buildroot's
source dir is), the sed fixups to $(BUSYBOX_BUILD_CONFIG) fail.
Fixes: #4363
Signed-off-by: Nathan Lynch <ntl@pobox.com>
[yann.morin.1998@free.fr: use $(INSTALL) instead of cp]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
If the source target skeleton is read-only (eg. because Buildroot's
source dir is), modifications to the output target (such as creating
/etc/hostname and /etc/issue) fail.
(This can happen if the Buildroot source dir is NFS-mounted read-only
to be shared between different machines, for example).
Signed-off-by: Nathan Lynch <ntl@pobox.com>
[yann.morin.1998@free.fr: we use rsync now, not cp; --chmod=Du+w
suggested by Arnout; clarify commit log]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts commit f96e4d7f34.
As suggested by Thomas, we need to find a single solution that is
valid for both (e)glibc and uClibc.
There is work on-going by Alexandre, so just revert this for now.
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2013-6712.
Note that there's no xz format tarball for 5.5.8.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libass is a portable subtitle renderer for the
ASS/SSA (Advanced Substation Alpha/Substation Alpha) subtitle format.
This package was originally found at : https://github.com/huceke/buildroot-rbp
By gimli <ebsi4711@gmail.com>
[Peter: make fontconfig/enca optional, fix license, add host-pkgconf,
optionaliconv/harfbuzz support]
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: gimli <ebsi4711@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Extremely Naive Charset Analyser.
This package was originally found at : https://github.com/huceke/buildroot-rbp
By gimli <ebsi4711@gmail.com>
[Peter: drop libiconv dep, tools patch, simplify host tools build]
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: gimli <ebsi4711@gmail.com>
Cc: Bernd Kuhls <berndkuhls@hotmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
OTP R16B03-1 is a service release which corrects a few issues found in
the R16B03 release. The corrections are:
- The ODBC application was missing in the prebuilt Windows installers
- 3 corrections in the SSL application:
- Add missing validation of the server_name_indication option and test for
its explicit use.
- Elliptic curve selection in server mode now properly selects a curve
suggested by the client, if possible.
- The server did not indicate support for secure renegotiation during TLS
extension handling.
- In the syntax tools application a bug was introduced which broke
reverting of local funs. This is now corrected (thanks to Anthony
Ramine)
- wx - Solved a problem which caused the debugger to crash when closing a
window. Fixed static linking on Mac.
- xmerl - Fixed a problem in the SAX-parser when the header of the next
document was appearing in the buffer when using the
xmerl_sax_parser:stream/2 function.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
