- update "Understanding how to rebuild packages" section
- add "Understanding when a full rebuild is necessary" section
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Consider the second chapter: "starting-up", as a tutorial.
Assuming that, using.txt only contains the very first commands used to get
configure and build its very first target system.
So, the following subsection from using.txt have been to common-usage.txt:
- Offline builds
- Building out-of-tree
- Environment variables
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Split and rephrasing of introduction.txt.
Cross-toolchain explainations moved from introduction.txt into
embedded-basics.txt.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The new skeleton of the manual as it has been thought:
1. About Buildroot:
Presentation of Buildroot
2. Starting up:
Everything to quickly and easily start working with Buildroot
3. Working with Buildroot
Basics to make your work fitting your needs
4. Troubleshooting
5. Going further in Buildroot's innards
Explaination of how buildroot is organised, how it works, etc
6. Developer Guidelines
7. Getting involved
8. Contibuting to Buildroot
9. Legal notice
10. Appendix
It is easy to distinguish two parts in this plan:
- Sections 1 to 4 mainly address people starting with Buildroot
- Sections 5 to 10 are more focused on how to develop Buildroot itself
Most of the existing sections have just been moved in the hierarchy,
few were split and dispatch in, what i think was the relevant section,
and numerous others have been created.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Useful to produce extra warnings for packages that have special
licensing-related issues.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This directory groups the following elements:
* the default root filesystem skeleton
* the default device tables
* the Config.in options for system configuration (UART port for
getty, system hostname, etc.)
* the make rules to apply the system configuration options
Even though the skeleton and device tables could have lived in fs/, it
would have been strange to have the UART, system hostname and other
related options into fs/. A new system/ directory makes more sense.
As a consequence, this patch also removes target/Makefile.in, which
has become useless in the process.
[Peter: fixup TARGET_SKELETON settings / documentation to match]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Yann E. MORIN <yann.morin.1998@free.fr>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
With the introduction of a specific macro for host targets, it was decided
to also make the names of the macros more intuitive: generic-package,
autotools-package and cmake-package.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Create host-generic-package, host-autotools-package and
host-cmake-package macros. Such a macro is more intuitive to use than
the $(call ...,host) construct. Also it speeds things up by having
one less $(call ...) evaluation.
Also includes documentation update, but not for buildroot.html.
This brings the time for 'make -qp' (which is used by bash-completion)
down from 1.85s to 1.35s on my laptop.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Based on description by Thomas Petazzoni at:
http://free-electrons.com/blog/buildroot-2011-11/
Signed-off-by: Nathan Lynch <ntl@pobox.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The current structure of the LIBFOO_SITE_METHOD paragraph would make
it difficult to add documentation for the "file" and "local" methods.
There are enough possible values for LIBFOO_SITE_METHOD that
describing them in a sub-list seems to work well, which makes it
easier to add documentation for new methods.
Signed-off-by: Nathan Lynch <ntl@pobox.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Buildroot supports the use of local filesystem paths in LIBFOO_SITE
since the 2011.11 release, but this is not documented in the manual.
Fix this and slightly reword the surrounding doucmentation
accordingly.
Signed-off-by: Nathan Lynch <ntl@pobox.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Since these two special make targets are very useful but not yet
mentioned in the documentation I added them to the make help and
the manual.
Signed-off-by: Stephan Hoffmann <sho@reLinux.de>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This modifies the definition of DOWNLOAD to receive two arguments:
the first one is the full URL of the file to download, whereas the second
(and optional) is the name the file will have once downloaded.
Same thing with the SOURCE_CHECK_WGET and SCP functions.
All calls to these functions have been changed to the shortest form of
the new API, except for toolchains acquisition. Since there is quite a
number of different toolchains this call to DOWNLOAD is better set to the
generic one.
Signed-off-by: Alvaro G. M <alvaro.gamez@hazent.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Stephan Hoffmann <sho@relinux.de>
Downloading Microblaze LE toolchain works on a clean install
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: adjusted according to Arnout's suggestions]
Signed-off-by: Samuel MARTIN <s.martin49@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Samuel MARTIN <s.martin49@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Samuel MARTIN <s.martin49@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Samuel MARTIN <s.martin49@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When ccache is enabled, TARGET_CC is "ccache gcc". Without quotes,
when assigning CC=$(TARGET_CC), only "ccache" gets assigned to CC.
Signed-off-by: Shawn J. Goff <shawn7400@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: s/but/should as suggested by Michael S. Zick]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
