In order to be package agnostic, the install phase is now using cargo
instead of install. TARGET_CONFIGURE_OPTS is now also set when running
cargo in order to support cross compiling C code within cargo.
This commit also adds support/download/cargo-post-process to perform
the vendoring on Cargo packages.
The <pkg>_LICENSE variable of cargo packages is expanded with ",
vendored dependencies licenses probably not listed" as currently for
all packages, the licenses of the vendored dependencies are not taken
into account.
Signed-off-by: Patrick Havelange <patrick.havelange@essensium.com>
[Thomas: add support for host-cargo-package and vendoring]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit introduces the download post-process script
support/download/go-post-process, and hooks it into the Go package
infrastructure.
The -modcacherw flag is added to ensure that the Go cache is
read/write, and can be deleted properly upon "make clean".
The <pkg>_LICENSE variable of golang packages is expanded with ",
vendored dependencies licenses probably not listed" as currently for
all packages, the licenses of the vendored dependencies are not taken
into account.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
For now, the download post-process logic uses mk_tar_gz, which repacks
a tarball compressed with gzip. So we can only accept as input a
tarball also compressed with gzip. To enforce that, this commit
changes post_process_unpack() to use tar xzf. This makes sure that if
a tarball compressed with something else than gzip gets used, it will
bail out and we will notice.
Support for other compression schemes can be added later on.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The original patch for commit cff428fe31 ("download/git: support Git
LFS") included a call to "git lfs install" but this was a problem as it
could modify ~/.gitconfig outside the dl/ tree. When this was
updated it was thought that the modification to gitconfig was
unnecessary because the LFS fetch and checkout steps are performed
manually.
Unfortunately, this is not correct and the LFS checkout fails with:
Cannot checkout LFS objects, Git LFS is not installed.
Add the call to "git lfs install", with the --local option so that only
the repository's .git/config is modified and not the user's global
~/.gitconfig.
This is also required for submodules as the parent repository's config
is not inherited.
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Vincent Fazio <vfazio@xes-inc.com>
Signed-off-by: John Keeping <john@metanate.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
download post process scripts will often need to unpack the source
code tarball, do some operation, and then repack it. In order to help
with this, post-process-helpers provide an unpack() function and a
repack() function.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
In order to support package managers such as Cargo (Rust) or Go, we
want to run some custom logic after the main download, but before
packing the tarball and checking the hash.
To implement this, this commit introduces a concept of download
post-processing: if -p <something> is passed to the dl-wrapper, then
support/download/<something>-post-process will be called.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr:
- double-quote variable expansion when calling post-process script
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Git Large File Storage replaces large files with text pointers in the
Git repository while storing the contents on a remote server. If a
repository is using this extension, then git-lfs must be used to
checkout the large files before the source archive is generated.
Signed-off-by: John Keeping <john@metanate.com>
[vfazio:
- add git-lfs to DL_TOOLS_DEPENDENCIES
- fixup for 5a0d681394
("infra/pkg-download: make the DOWNLOAD macro fully parameterised")
]
Signed-off-by: Vincent Fazio <vfazio@xes-inc.com>
[Arnout:
- don't "git lfs install";
- recurse into submodules.
]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add Secure File Transfer Program (SFTP) support using a simple wrapper.
SFTP is a common protocol used to transfer files securely between
enterprises, but it is not currently supported in Buildroot because all
of the packages are usually available via HTTP, git or some other
download method.
SFTP is similar to FTP but it preforms all operations over an encrypted
SSH transport using a specific protocol. This is unlike ftps, which is
traditional FTP over an SSL/TLS connection.
Signed-off-by: Thomas Preston <thomas.preston@codethink.co.uk>
Signed-off-by: Michael Drake <michael.drake@codethink.co.uk>
[Arnout:
- update documentation with sftp everywhere scp is mentioned;
- rename "verbose" variable to "quiet";
- print the sftp command, similar to wget and scp helpers.
]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Commit 54d3d94b6e broke the 'hg' download
method, in a similar way as it broke the 'git' download method (later fixed
with commit b70ce56651), by introducing extra
output on stdout in a case where the output is redirected.
In the case of 'hg', the 'hg archive' step uses shell redirection rather
than directly letting hg write the output file, since commit
76b51f90c0.
As a result, the extra print added by the _hg function is prepended to the
actual archive, causing an invalid archive.
Fix by using the _plain_hg function instead. The disadvantage is that the
command for 'hg archive' is no longer printed.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
When a --transform expression is provided, it is by default also applied
to the target of a symlink.
When we create tarballs (from git or svn checkouts), we use a --transform
expression to replace the leading ./ with the package name and version.
This causes issues when a package contains symlinks that points to
./something, as the leading './' is also replaced.
Fix that by using the 'S' transformation scope flag, as described in the
tar manual:
https://www.gnu.org/software/tar/manual/html_node/transform.html#transform
In addition, several transformation scope flags are supported, that
control to what files transformations apply. These are:
‘r’ Apply transformation to regular archive members.
‘R’ Do not apply transformation to regular archive members.
‘s’ Apply transformation to symbolic link targets.
‘S’ Do not apply transformation to symbolic link targets.
‘h’ Apply transformation to hard link targets.
‘H’ Do not apply transformation to hard link targets.
Default is ‘rsh’ [...].
Fixes: #13616
This has been checked to not change any of the existing hash for any of
our git-downloaded package (some are host-only, hence the few fixups):
---8<---
$ m="$( git grep -l -E -- -br[[:digit:]]+.tar.gz boot package/ \
|awk -F/ '{print $(NF-1)}' \
|sed -r -e 's/(imx-mkimage|netsurf-buildsystem|prelink-cross|qoriq-rcw|vboot-utils)/host-\1/g' \
-e 's/$/-source/'
)"
$ make defconfig; make clean; BR2_DL_DIR=$(pwd)/trash-me make ${m}
---8<---
Note: it is unclear what the 'H' flag does nor how it works, because the
concept of "target of a hardlink" is not obvious; probably it has to do
with how tar internally detects and stores hardlinks. Since we do not
yet have any issue with hardlinks, just ignore the problem for now, and
postpone until we have an actual issue with a real test-case.
Signed-off-by: Jean-pierre Cartal <jpcartal@free.fr>
Cc: Vincent Fazio <vfazio@xes-inc.com>
[yann.morin.1998@free.fr:
- re-indent commit log
- add scriptlet to test existing hashes
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 54d3d94b6e ("support/download: print
command used for download") broke the git and svn download helpers, because
these helpers have invocations of the _git/_svn commands where the exact
output matters.
For example for git, this would result in:
date: invalid date ‘GIT_DIR=.../dl/libyuv/git/.git git log -1 --pretty=format:%ci \n2019-04-12 17:48:45 +0000’
Detected a corrupted git cache.
Removing it and starting afresh.
Fix by splitting the _git function in two: _git and _plain_git.
The former echoes the command, and then calls the latter.
Most invocations use _git as before, but those cases where the output should
not be disturbed, directly call _plain_git.
For symmetry, all download helpers are aligned, even though only the git and
svn helpers were broken.
Fixes: #13631
Fixes:
http://autobuild.buildroot.org/results/c2f/c2fcd4aa6660e3c2f9c6f85646ca7dfe0db56040/
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
[yann.morin.1998@free.fr: add bug report and autobuild failure]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Even though that most download commands actually print some output, like
progress indication or other messages, the actual command used is not. This
makes it hard to analyze a build log when you are not fully familiar with
the typical output of said log.
Update the download helpers to do just that, respecting any quiet/verbose
flag so that a silent make (make -s) does not get more verbose.
Note: getting rid of the duplication of the command in the script is not
straightforward without breaking support for arguments with spaces.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
[yann.morin.1998@free.fr: use printf, not echo]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Most 'verbose' variable inside the download helpers actually mean 'quiet'.
I.e. they are assigned in case quiet operation is requested, and empty in
case of non-quiet operation. Using the name 'verbose' for such a variable is
confusing, especially when you want to test the variable on emptiness or
non-emptiness (in a subsequent commit).
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since c043ecb20c (support/download: change format of archives
generated from svn), the svn backend uses the generic helper to
create reproducible archives.
That helper really does its job as expected, but the svn backend
is flawed in two ways:
- the first, most obvious breakage happens with versions older
than 1.9, as they do not support the '--show-item' option
for the 'info' action;
- the second is more involved, in that svn will by default
expand the old, legacy, deprecated, cumbersome CVS-style
keywords, in the form of revision marks like '$Date$' in a
C-style comment in a source file. These replacements are
done on checkout as well as on export, and they use local
settings, like the local locale and timezone.
This means that two people with different settings, will get
different sources when the svn-checkout or svn-export the same
revision from the same tree...
Needless to say that this is not very reproducible...
While the first is easily solved, the second is more involved.
We need to ensure that what source is used initially to compute
the hash, will also be the source that are used to check the hash.
There are basically two solutions:
1. we ensure the same environment, by forcing the timezone and
the locale to arbitrary values
2. we disable keyword expansion
For the first solution, this still leaves the possibility that we
miss some environment settings that have an impact on the keyword
expansion. It would mean that Yann's settings be used, as he did
introduce the hash for the only svn-downloaded package we have,
avrdude, settings which are:
TZ=Europe/Paris
LC_TIME="en_US.UTF-8"
LC_COLLATE="en_GB.UTF-8"
LC_MONETARY="fr_FR.utf8"
LC_NUMERIC="fr_FR.utf8"
The second option means that the generated archives change. That
means we'd have to bump the archive version for svn downloads, and
that we update the hashes for all the svn-downloaded packages.
We chose to go with the second option, because this is what really
makes more sense, rather than hard-coding arbitrary values in the
environment. And we also have only one svn-downloaded package,
avrdude.
And thus, we're reaching the trigger for this change: avrdude is
impacted by the CVS-keyword expansion issue:
https://svn.savannah.gnu.org/viewvc/avrdude/trunk/avrdude/atmel-docs/EDBG/common/jquery/layout/jquery.layout.js?revision=1396&view=markup
which would give two different files when checked out on different
machines:
diff -durN foo/avrdude-r1450/avrdude/atmel-docs/EDBG/common/jquery/layout/jquery.layout.js bar/avrdude-r1450/avrdude/atmel-docs/EDBG/common/jquery/layout/jquery.layout.js
--- foo/avrdude-r1450/avrdude/atmel-docs/EDBG/common/jquery/layout/jquery.layout.js 2020-09-22 09:36:45.000000000 +0200
+++ bar/avrdude-r1450/avrdude/atmel-docs/EDBG/common/jquery/layout/jquery.layout.js 2020-09-22 09:36:45.000000000 +0200
@@ -1,6 +1,6 @@
/**
* @preserve jquery.layout 1.3.0 - Release Candidate 30.51
- * $Date: 2015-11-02 22:13:28 +0100 (Mon, 02 Nov 2015) $
+ * $Date: 2015-11-02 21:13:28 +0000 (Mon, 02 Nov 2015) $
* $Rev: 303005 $
*
* Copyright (c) 2012
@@ -4718,7 +4718,7 @@
/**
* jquery.layout.state 1.0
- * $Date: 2015-11-02 22:13:28 +0100 (Mon, 02 Nov 2015) $
+ * $Date: 2015-11-02 21:13:28 +0000 (Mon, 02 Nov 2015) $
*
* Copyright (c) 2010
* Kevin Dalman (http://allpro.net)
@@ -5074,7 +5074,7 @@
/**
* jquery.layout.buttons 1.0
- * $Date: 2015-11-02 22:13:28 +0100 (Mon, 02 Nov 2015) $
+ * $Date: 2015-11-02 21:13:28 +0000 (Mon, 02 Nov 2015) $
*
* Copyright (c) 2010
* Kevin Dalman (http://allpro.net)
@@ -5356,7 +5356,7 @@
/**
* jquery.layout.browserZoom 1.0
- * $Date: 2015-11-02 22:13:28 +0100 (Mon, 02 Nov 2015) $
+ * $Date: 2015-11-02 21:13:28 +0000 (Mon, 02 Nov 2015) $
*
* Copyright (c) 2012
* Kevin Dalman (http://allpro.net)
So we also update the hash for avrdude.
Fixes:
http://autobuild.buildroot.org/results/e3b/e3b0508047f32008ebfa83c5255ec5994b6af120/ (time issue)
http://autobuild.buildroot.org/results/48e/48e78e84b425e79cdb98c16ab40247a0fa7e9676/ (keyword expansion issue)
Reported-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Vincent Fazio <vfazio@xes-inc.com>
Cc: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Some download backends, like svn, will provide timestamps with a
sub-second precision, e.g.
$ svn info --show-item last-changed-date [...]
2021-02-19T20:22:34.889717Z
However, the PAX headers do not accept sub-second precision, leading to
failure to download from subversion:
tar: Time stamp is out of allowed range
tar: Exiting with failure status due to previous errors
make[1]: *** [package/pkg-generic.mk:148: [...]/build/subversion-1886712/.stamp_downloaded] Error 1
Fix that by massaging the timestamp to drop the sub-second part. We
do that in the generic helper, rather than the svn backend, so that
all callers to the generic helper benefit from this, as this is more
an internal details of the tarball limitations, than of the backends
themselves.
Reported-by: Roosen Henri <Henri.Roosen@ginzinger.com>
Signed-off-by: Vincent Fazio <vfazio@xes-inc.com>
[yann.morin.1998@free.fr:
- add Henri as reporter
- move it out of the svn backend, and to the generic helper
- reword the commit log accordingly
- use an explicit time format rather than -Iseconds
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Like we recently did for git, switch the archives generated from
subversion to be reproducible whatever the tar version.
We have no in-tree users of the svn backend which also has hashes,
so no hash to update.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Heiko Thiery <heiko.thiery@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Vincent Fazio <vfazio@xes-inc.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Vincent Fazio <vfazio@xes-inc.com>
Commit 89f5e9893 (support/download/svn: generate reproducible svn
archives) did what it said, but can be siplified a bit.
Indeed, we are doing an svn export, so we won't have any of the .svn
directories, neither at the root of the extract, nor in any of the
sub-directories.
As such, we do not need to filter them out when we generate the list
of files to include in the archive.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Heiko Thiery <heiko.thiery@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Vincent Fazio <vfazio@xes-inc.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Vincent Fazio <vfazio@xes-inc.com>
Switch to using the tarball helper, that can generate reproducible
archives whatever the tar version >= 1.27.
However, those archives are not identical to the previous ones generated
in the (now-broken) gnu format.
To avoid any clashing between old and new archives, and new and old
Buildroot versions, we need to name the new generated archives
differently from the existing ones.
So, we bump the git-specific format-version to -br1.
The %ci date has been supported by git back to 1.6.0, released August
2008); it is not strictly ISO8601, but is still accepted as a PAX date
header. The strict ISO8601 placeholder, %cI, was only introduced with
2.2.0, release in November 2014, so too recent to be widely available.
As the format and the names of the archives changes, we need to update
all the hash files with the new names and hashes.
Of all the bootloaders that have a git download method, vexpress-firmware
is the only one to have a hash. Others have no hash files, or they have
explicitly set BR_NO_CHECK_HASH_FOR.
For the packages, linux-headers is the special snowflake, as the git
download is only for custom git tree, so it is excluded from the hash
verification with BR_NO_CHECK_HASH_FOR.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Vincent Fazio <vfazio@xes-inc.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Vincent Fazio <vfazio@xes-inc.com>
---8<------8<------8<------8<---
#!/bin/sh
# Find and download all packages using git as backend.
# Manually fix hashes for affected packages.
# Packages that only have a host variant
HOST_ONLY='imx-mkimage|mxsldr|netsurf-buildsystem|opkg-utils|prelink-cross|qoriq-rcw|vboot-utils'
# Packages that have a non-git main _SOURCE, and/or which
# have BR_NO_CHECK_HASH_FOR for the git _SOURCE
NOT_GIT='aufs|aufs-util|xenomai|linux-headers'
export BR2_DL_DIR=$(pwd)/temp-dl-dir
make defconfig
make $( git grep -l -E 'SITE_METHOD[[:space:]]*:?=[[:space:]]*git\>|_SITE[[:space:]]*:?=[[:space:]]*git:' \
boot/vexpress-firmware/ package/ \
|sed -r -e 's,.*/([^/]+)\.mk,\1,' \
|sed -r -e '/^('"${NOT_GIT}"')$/d;' \
-e 's/^('"${HOST_ONLY}"')/host-\1/;' \
-e 's/$/-legal-info/;'
)
---8<------8<------8<------8<---
We currently need to generate reproducible archives in at least two
locations: the git and svn download backends. We also know of some
future potential use (e.g. the other download backends, like cvs, or
in the upcoming download post-processors for vendoring, like cargo
and go).
However, we are currently limited to a narrow range of tar versions
that we support, to create reproducible archives, because the gnu
format we use has changed with tar 1.30.
As a consequence, and as time advances, more and more distros are,
or will eventually start, shipping with tar 1.30 or later, and thus
we need to always build our on host-tar.
Now, thanks to some grunt work by Vincent, we have a set of options
that we can pass tar, to generate reproducible archives back from
tar-1.27 and up through tar-1.32, the latest released version.
However, those options are non-trivial, so we do not want to have
to repeat those (and maintain them) in multiple locations.
Introduce a helper that can generate a reproducible archive from
an input directory.
The --pax-option, to set specific PAX headers, does not accept
RFC2822 timestamps which value are too away from some fixed point
(set atcompile-time?):
tar: Time stamp is out of allowed range
However, the same timestamps passed as strict compliant ISO 8601 are
accepted, so that's what we expect as a date format.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Vincent Fazio <vfazio@xes-inc.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Vincent Fazio <vfazio@xes-inc.com>
---8<------8<------8<------8<---
# Here is a Makefile used to test all the versions of tar, with
# different output formats and different sets of options:
# Versions prior to 1.27 do not build on recent machines, because
# 'gets()' got removed (rightfully so), so don't count them as
# candidates.
VERSIONS = 1.27 1.27.1 1.28 1.29 1.30 1.31 1.32
DATE = Thu 21 May 2020 06:44:11 PM CEST
TARS = \
$(patsubst %,test_gnu_%.tar,$(VERSIONS)) \
$(patsubst %,test_posix_%.tar,$(VERSIONS)) \
$(patsubst %,test_posix_paxoption_%.tar,$(VERSIONS))
all: $(TARS)
sha1sum $(^)
.INTERMEDIATE: test_%.tar
test_gnu_%.tar: tar.% list
./$(<) cf - -C test \
--transform="s#^\./#test-version/#" \
--numeric-owner --owner=0 --group=0 \
--mtime="$(DATE)" \
--format=gnu \
-T list \
>$(@)
test_posix_%.tar: tar.% list
./$(<) cf - -C test \
--transform="s#^\./#test-version/#" \
--numeric-owner --owner=0 --group=0 \
--mtime="$(DATE)" \
--format=posix \
-T list \
>$(@)
test_posix_paxoption_%.tar: tar.% list
./$(<) cf - -C test \
--transform="s#^\./#test-version/#" \
--numeric-owner --owner=0 --group=0 \
--mtime="$(DATE)" \
--format=posix \
--pax-option='delete=atime,delete=ctime,delete=mtime' \
--pax-option='exthdr.name=%d/PaxHeaders/%f,exthdr.mtime={$(DATE)}' \
-T list \
>$(@)
list: .FORCE
list: test
(cd test && find . -not -type d ) |LC_ALL=C sort >$(@)
LONG = L$$(for i in $$(seq 1 200); do printf 'o'; done)ng
test: .FORCE
test:
rm -rf test
mkdir -p test/bar
echo foo >test/Foo
echo bar >test/bar/Bar
ln -s bar/Bar test/buz
echo long >test/Very-$(LONG)-filename
ln test/Very-$(LONG)-filename \
test/short
.PRECIOUS: tar.%
tar.%: tar-%
cd $(<) && ./configure
$(MAKE) -C $(<)
install -m 0755 $(<)/src/tar $(@)
.PRECIOUS: tar-%
tar-%: tar-%.tar.gz
tar xzf $(<)
.PRECIOUS: tar-%.tar.gz
tar-%.tar.gz:
wget "https://ftp.gnu.org/gnu/tar/$(@)"
.FORCE:
clean:
rm -rf tar-* tar.* test_* test list
---8<------8<------8<------8<---
Older versions of git store the absolute path of the submodules'
repository as stored in the super-project, e.g.:
$ cat some-submodule/.git
gitdir: /path/to/super-project/.git/modules/some-submodule
Obviously, this is not very reproducible.
More recent versions of git, however, store relative paths, which
de-facto makes it reproducible.
Fix older versions by replacing the absolute paths with relative ones.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
To generate a reproducible archive from a svn repository mainly the same
aproach is done like for the archives from a git repository.
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
[yann.morin.1998@free.fr: get the date of the revision]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This reverts commit 6f35d96756.
Repeat after me: on the master branch you will not work. On the master
branch you will not work.
This definitely shouldn't have been pushed. Sorry about that.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Running "git fetch origin ${cset}:${cset}" to create a local ref
${cset} from the remote ref ${cset} causes Git to issue a warning like
the below, when the version is a full commit hash:
===
warning: refname '49eb4ecb1ef9879ebc6789a1bdb536ab2b1d9871' is ambiguous.
Git normally never creates a ref that ends with 40 hex characters
because it will be ignored when you just specify 40-hex. These refs
may be created by mistake. For example,
git switch -c $br $(git rev-parse ...)
where "$br" is somehow empty and a 40-hex ref is created. Please
examine these refs and maybe delete them. Turn this message off by
running "git config advice.objectNameWarning false"
===
This warning is very confusing for users, and is caused by the fact
that Git doesn't like our local ref name to look like a commit hash.
So, this commit proposes to fix the issue by having the local ref
named buildroot-${cset}, i.e
buildroot-${version-specified-by-the-package}.
The generated tarballs are exactly identical, nothing changes, it is
really just internally the local ref we are using to checkout the
correct version that is different. And it avoids the confusing
warning.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
'.' should be at the end of the sentence, not the beginning of a new
line.
Signed-off-by: John Keeping <john@metanate.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The scp download helper is broken when the server URL starts with 'scp://'.
Such prefix is used in two situations:
1. to let FOO_SITE point to an scp location without explicitly having to set
'FOO_SITE_METHOD = scp'
2. when BR2_PRIMARY_SITE or BR2_BACKUP_SITE points to an scp location. In
this case, there is no equivalent of 'SITE_METHOD'.
Strip out the scheme prefix, similarly to how the 'file' download helper
does it. That helper has the same cases as above.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
scp download is broken, because scp is called without filename argument and
only the server is specified. The call is:
scp <server> <outputfile>
but should be:
scp <server>/<filename> <outputfile>
Instead of assuming '-u' lists a full URL including filename (which it is
not), align with the wget helper where -u is the server URL and -f gives the
filename.
With this commit, an scp download can work if FOO_SITE_METHOD is explicitly
set to 'scp' and the server does not have a scheme prefix 'scp://'.
The next commit will handle the case where a scheme prefix is present.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas: s/URL/URI/, as noticed by Yann.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since commit 38de434123 ("download: fix file:// BR2_PRIMARY_SITE
(download cache)"), the urlencode option is no longer passed to the
download backend, because we use ${backend} instead of
${backend_urlencode}.
We must get the urlencode information from backend_urlencode.
Signed-off-by: Damien Thébault <damien.thebault@vitec.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas: rework commit log]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This file uses leading spaces, not TABs.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
wget is the only downloader currently usable with BR2_PRIMARY_SITE, and that
doesn't work at all for file:// URLs. The symptoms are these:
support/download/dl-wrapper -c '2.4.47' -d '/PATH/build/sw/source/attr' -D '/PATH/build/sw/source' -f 'attr-2.4.47.src.tar.gz' -H 'package/attr//attr.hash' -n 'attr-2.4.47' -N 'attr' -o '/PATH/build/sw/source/attr/attr-2.4.47.src.tar.gz' -u file\|urlencode+file:///NFS/buildroot_dl_cache/attr -u file\|urlencode+file:///NFS/buildroot_dl_cache -u http+http://download.savannah.gnu.org/releases/attr -u http\|urlencode+http://sources.buildroot.net/attr -u http\|urlencode+http://sources.buildroot.net --
file:///NFS/buildroot_dl_cache/attr/attr-2.4.47.src.tar.gz: Unsupported scheme `file'.
ERROR: attr-2.4.47.src.tar.gz has wrong sha256 hash:
ERROR: expected: 25772f653ac5b2e3ceeb89df50e4688891e21f723c460636548971652af0a859
ERROR: got : e3b0c44298fc1c149afbf4c8996fb92427ae41e4649b934ca495991b7852b855
ERROR: Incomplete download, or man-in-the-middle (MITM) attack
In the case of custom Linux kernel versions, this is fatal, because there isn't
necessarily a hash file to indicate that wget's empty tarball is wrong.
This seems to have been broken by commit c8ef0c03b0, because:
1. BR2_PRIMARY_SITE always appends "urlencode" (package/pkg-download.mk)
2. Anything with the "|urlencode" suffix in $uri will end up using wget due to
the backend case wildcarding.
3. The wget backend rejects file:/// URLs ("unsupported scheme"), and we end up
with an empty .tar.gz file in the downloads directory.
Fix that by shell-extracting the backend name from the left of "|". I'm not
positive if all URLs will have a "|", so this code only looks for a "|" left of
the "+".
Signed-off-by: Hollis Blanchard <hollis_blanchard@mentor.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The download wrapper is a purely internal helper, and is not supposed to
be callable manually. No need to offer some help.
Besides, the help text was way out-dated.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
'+' is a valid character in a url. The current dl-wrapper gets the
URI scheme by dropping everything after the last '+' character, with
the intension of finding 'git' from e.g. 'git+https://uri'.
If a uri has a '+' anywhere in it, it ends up using too much of the
string as a scheme, and fails to match the handler properly.
An example of where this form of URI is used is when using deploy tokens
in gitlab. It uses a form like https://<username>:<password>@gitlab.com/<group>/<repo.git>
where username for deploy token is of the form 'gitlab+deploy-token-<number>'.
Use the %% operator to search backwards until the last '+' character when
dropping the rest of the string as we know that the first '+'
in the string should be the scheme.
Signed-off-by: Robert Beckett <bbeckett@netvu.org.uk>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since the rework of the download infrastructure, the "file" download
helper gets passed an URL that starts with file://, but forgets to
strip it before passing it to "cp", causing a failure as the "cp"
program isn't prepared for file paths starting with file://. This is
fixed by stripping the file:// at the beginning of the URL.
In addition, the path passed to cp lacked a slash between the
directory path and the filename part of the url. This is fixed by
adding a slash at the appropriate places.
Fixes the following build failure when the "file" download method is
used:
cp: cannot stat 'file:///home/angelo/DEV/TOOLCHAINSarmv7-eabihf--glibc--bleeding-edge-2017.11-1.tar.bz2': No such file or directory
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
We currently attempt a shallow clone, as tentative to save bandwidth and
download time.
However, now that we keep the git tree as a cache, it may happen that we
need to checkout an earlier commit, and that would not be present with a
shallow clone.
Furthermore, the shallow fetch is already really broken, and just
happens to work by chance. Consider the following actions, which are
basically what happens today:
mkdir git
git init git
cd git
git remote add origin https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
git fetch origin --depth 1 v4.17-rc1
if ! git fetch origin v4.17-rc1:v4.17-rc1 ; then
echo "warning"
fi
git checkout v4.17-rc1
The checkout succeeds just because of the git-fetch in the if-condition,
which is initially there to fetch the special refs from github PRs, or
gerrit reviews. That fails, but we just print a warning. If we were to
ever remove support for special refs, then the checkout would fail.
The whole purpose of the git cache is to actually save bandwidth and
download time, but in the long run. For one-offs, people would
preferably use a wget download (e.g. with the github macro) instead of
a git clone.
We switch to always doing a full clone. It is more correct, and pays off
in the long run...
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When a git tree has had sub-dir <-> sub-module conversions, or has had
submodules added or removed over the course of time, checking out a
changeset across those conversions/additions/removals may leave
untracked files, or may fail because of a conflict of type.
So, before we checkout the new changeset, we forcibly remove the
submodules. The new set of submodules, if any, will be restored later.
Ideally, we would use a native git command: git submodule deinit --all.
However, that was only introduced in git 1.8.3 which, while not being
recent by modern standards, is still too old for some enterprise-grade
distributions (RHEL6 only has git-1.7.1).
So, instead, we just use git submodule foreach, to rm -rf the submodules
directory.
Again, we would ideally use 'cd $toplevel && rm -rf $path', but
$toplevel was only introduced in git 1.7.2. $path has always been there.
So, instead, we just cd back one level, and remove the basename of the
directory.
Eventually, we need to get rid of now-empty and untracked directories,
that were parents of a removed submodule. For example. ./foo/bar/ was a
submodule, so ./foo/bar/ was removed, which left ./foo/ around.
Yet again, recent-ish git versions would have removed it during the
forced checkout, but old-ish versions (e.g. 1.7.1) do not remove it with
the forced checkout.
Instead we rely on the already used forced-forced clean of directories,
untracked, and ignored content, to really get rid of extra stuff we are
not interested in.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Tested-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Force the checkout to ignore and throw away any local changes. This
allows recovering from a previous partial checkout (e.g. killed by
the user, or by a CI job...)
git checkout -f has been supported since the inception of git, so we
can use it without any second thought.
Also do a forced-forced clean, to really get rid of all untracked stuff.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Tested-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In some cases, the repository may be in a state we can't automatically
recover from, especially since we must still support oldish git versions
that do not provide the necessary commands or options thereof.
As a last-ditch recovery, delete the repository and recreate the cache
from scratch.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Check that the given cset is indeed something we can checkout. If not,
then exit early.
This will be useful when a later commit will trap any failing git
command to try to recover the repository by doing a clone from scratch:
when the cset is not a commit, it does not mean the repository is broken
or what, and re-cloning from scratch would not help, so no need to trash
a good cache.
Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Tested-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
That way, we can pushd earlier, which will help with last-ditch recovery
in a followup commit.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Tested-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
We really want the user not to use our git cache manually, or their
changes (committed or not) may eventually get lost.
So, add a warning file, not unlike the one we put in the target/
directory, to warn the user not to use the git tree.
Ideally, we would have carried this file in support/misc/, but the git
backend does not have access to it: the working directory is somewhere
unknown, and TOPDIR is not exported in the environment.
So, we have to carry it in-line in the backend instead.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Tested-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Older versions of tar (e.g. 1.27.1) incorrectly interpret the escaping
of the regexp separator, and generate broken tarballs.
For example, given the following transform expression:
--transform="s/^\.\//squashfs-e38956b92f738518c29734399629e7cdb33072d3\//"
the resulting paths in the generated tarball would be:
squashfs-e38956b92f738518c29734399629e7cdb33072d3\/
i.e. a directory which last character is indeed a '\'.
We fix that by using a separator which is very unlikely to occur in a
filename.
Fixes:
http://autobuild.buildroot.org/results/742/7427f34e5c9f6d043b0fe6ad2c66cc0f31d2b24f/
and probably a slew of others as well...
Take this opportunity to fix indentation on the following line
(leading spaces, not TABs).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The different versions of git will behave in different ways when
fetching remote references, as summarised by the table below:
| ancient git | new git
--------------------------------------------------------------------
git fetch | fetch all refs but tags | fetches all refs but tags
git fetch -t | fetches only tags | fetch all refs and tags
(git-fetch may still fetch tags, but only if reachable from a branch)
So, to cover all the bases, we do a simple fetch, to be sure we have
branches, followed by the existing fetch -t, to get extra tags.
Fixes:
http://autobuild.buildroot.net/results/0a2/0a238a7f55ea56c33b639ad03ed5796143426889/build-end.log
Reported-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
There are cases where a repository might be broken, e.g. when a previous
operation was killed or otherwise failed unexpectedly.
We fix that by always initialising the repository, as suggested by
Ricardo. git-init is safe on an otherwise-healthy repository:
Running git init in an existing repository is safe. It will not
overwrite things that are already there. [...]
Using git-init will just ensure that we have the strictly required files
to form a sane tree. Any blob that is still missing would get fetched
later on.
Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reported-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Tested-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
git always look directories up until it finds a repository. In case
the git cache is broken, it may no longer be identified as a repository,
and git will look higher in the directories until it finds one.
In the default conditions, this would be Buildroot's own git tree
(because DL_DIR is a subdir of Buildroot), but in some situations may
very well be any repository the user has Buildroot in, like a
br2-external tree...
So, we force git to use our git cache and never look elsewhere, as
Suggested by Ricardo.
Use GIT_DIR, as it has been there for ages now, while --git-dir was
only introduced later (even if most distros ship an later version),
as suggested by Arnout.
Also fix the one call to git that was not using the wrapper.
Reported-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Tested-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
${raw_name} is never defined in dl-wrapper, and therefore the value
passed to the -N option is always empty. This causes a problem for the
'cvs' backend, which uses the value of this option as the CVS module
to be downloaded.
If the name of the CVS module is omitted, all the CVS modules from
that CVS repository are downloaded, which creates a tarball with a lot
more contents, and the actual useful contents in a sub-directory,
obviously breaking patches that should be applied, and the entire
build process that follows.
Fixes:
http://autobuild.buildroot.net/results/fcee0e3d7eeeb373313b1794092c729b1b052348/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When calling the backend-specific helper scripts, the remaining
options are in ${@}. However, in order to let the helper script know
that those remaining options should not be parsed, but instead passed
as-is to the download tool, they must be separated from the main
options by "--".
Without this, packages that use <pkg>_DL_OPTS, such as the
amd-catalyst package, cannot download their tarball anymore.
Fixes:
http://autobuild.buildroot.net/results/de818f6e4c8e63d5e8a49c445d10c34eccc40410/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In case the git backend gets killed right in-between it finished
initialising the repository, but before it could add the remote,
we'd end up with a repository without the 'origin' remote, so we
would not be able to change its URL.
Another case that may happen (like in the build failure, below),
is that the repository was initialised with a previous version
of Buildroot, before the commit e17719264b (download/git: don't
require too-recent git) was applied, and that trepository was
still lying around...
Fixes:
http://autobuild.buildroot.org/results/25a/25aae054634368fadb265b97ebe4dda809deff6f/
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
git has supported -C only since 1.8.5, and some distros have not yet
caught up after more than 4 years...
Fall back to entering the directory.
Fixes:
http://autobuild.buildroot.net/results/35f9f7a4adc6c2cad741079e4afdf1408c94703b
Reported-by: André Hentschel <nerv@dawncrow.de>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: André Hentschel <nerv@dawncrow.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
