I do constantly get mails that fluent-bit fails to build for s390x.
So added this to ensure that the s390x architecture is checked as well
if I manually do:
$ ./utils/test-pkg -p fluent-bit -a
Signed-off-by: Thomas Devoogdt <thomas.devoogdt@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As we're about to remove the nds32 architecture support from
Buildroot, drop the toolchain-external-andes-nds32 external toolchain
package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Yu Chien Peter Lin <peterlin@andestech.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Instead of using an external toolchain built specifically for the
autobuilders to test RISC-V 64/musl, use a pre-built Bootlin
toolchain.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Instead of using an external toolchain built specifically for the
autobuilders to test RISC-V 64/glibc, use a pre-built Bootlin
toolchain.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Instead of using an external toolchain built specifically for the
autobuilders to test Xtensa/uclibc, use a pre-built Bootlin toolchain.
To be noted: that fragment was in fact already using a Bootlin
bleeding-edge toolchain, because BR2_TOOLCHAIN_EXTERNAL_CUSTOM=y is
missing from the fragment:
$ cat support/config-fragments/autobuild/br-xtensa-full.config >.config
$ make olddefconfig
$ grep BOOTLIN .config
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_ARCH_SUPPORTS=y
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_XTENSA_LX60_UCLIBC_BLEEDING_EDGE=y
# BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_XTENSA_LX60_UCLIBC_STABLE is not set
The original fragment was supposed to use a stable toolchain, so we
switch to explictly use a stable Bootlin toolchain.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr:
- add blurb about missing BR2_TOOLCHAIN_EXTERNAL_CUSTOM=y
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Instead of using an external toolchain built specifically for the
autobuilders to test x86-64/musl, use a pre-built Bootlin toolchain.
The previous configuration was for an Atom platform, but the Bootlin
toolchains only provide a Core i7 configuration. Since this is close
enough, we change to use this Core i7 configuration.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Instead of using an external toolchain built specifically for the
autobuilders to test x86-64/uclibc, use a pre-built Bootlin toolchain.
The previous configuration was for Core2 platform, but the Bootlin
toolchains only provide a Core i7 configuration. Since this is close
enough, we change to use this Core i7 configuration.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Instead of using an external toolchain built specifically for the
autobuilders to test SPARC64/glibc, use a pre-built Bootlin toolchain.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Instead of using an external toolchain built specifically for the
autobuilders to test SPARC/uclibc, use a pre-built Bootlin toolchain.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Instead of using an external toolchain built specifically for the
autobuilders to test SH4/uclibc, use a pre-built Bootlin toolchain.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr: drop BR2_sh4=y which is the default]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Instead of using an external toolchain built specifically for the
autobuilders to test RISC-V 32/glibc, use a pre-built Bootlin
toolchain.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Instead of using an external toolchain built specifically for the
autobuilders to test PowerPC e500mc/uclibc, use a pre-built Bootlin
toolchain.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Instead of using an external toolchain built specifically for the
autobuilders to test PowerPC64le Power8/glibc, use a pre-built Bootlin
toolchain.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Instead of using an external toolchain built specifically for the
autobuilders to test OpenRISC/uclibc, use a pre-built Bootlin
toolchain.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Instead of using an external toolchain built specifically for the
autobuilders to test nios2/glibc, use a pre-built Bootlin toolchain.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Instead of using an external toolchain built specifically for the
autobuilders to test mipsel/uclibc, use a pre-built Bootlin toolchain.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Instead of using an external toolchain built specifically for the
autobuilders to test mipsel32r6/glibc, use a pre-built Bootlin
toolchain.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Instead of using an external toolchain built specifically for the
autobuilders to test Microblaze EL/uclibc, use a pre-built Bootlin
toolchain.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Instead of using an external toolchain built specifically for the
autobuilders to test m68k 5208/uclibc, use a pre-built Bootlin
toolchain.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Instead of using an external toolchain built specifically for the
autobuilders to test m68k 68040/uclibc, use a pre-built Bootlin
toolchain.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Instead of using an external toolchain built specifically for the
autobuilders to test ARMv7-M/uclibc, use a pre-built Bootlin
toolchain.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Instead of using an external toolchain built specifically for the
autobuilders to test ARMv7/musl, use a pre-built Bootlin toolchain.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Instead of using an external toolchain built specifically for the
autobuilders to test ARM Cortex-A9/glibc, use a pre-built Bootlin
toolchain. Since this was meant to test very recent version of
toolchain components, we use the bleeding edge toolchain variant.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Instead of using an external toolchain built specifically for the
autobuilders to test ARMv5/uclibc, use a pre-built Bootlin toolchain.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Instead of using an external toolchain built specifically for the
autobuilders to test ARCle HS38/uclibc, use a pre-built Bootlin toolchain.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Instead of using an external toolchain built specifically for the
autobuilders to test AArch64/glibc, use a pre-built Bootlin toolchain.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add a minimal s390x s13 autobuild configuration for the
internal toolchain with glibc.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
As we recently stopped testing the x86-64 Sourcery toolchain, it means
we no longer have any x86-64 glibc based toolchain in our
autobuilders. Since this is a pretty common configuration, it makes
sense to test it, which this commit does by adding a config fragment
to use the x86-64 glibc bleeding edge Bootlin toolchain.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This toolchain uses an old gcc 6.2.0, and newer versions of the
toolchain are no longer publicly available. This old gcc 6.2.0 causes
build issues of Boost, which are unfixable without updating the
toolchain. As we're about to drop support for this toolchain entirely,
we must stop testing it in our autobuilder infrastructure.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Move to an external RISC-V 64 bit musl toolchain to ease the load
on the autobuilders.
Signed-off-by: Mark Corbin <mark@dibsco.co.uk>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Tested-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a RISC-V 64-bit autobuild configuration for the internal
toolchain with uclibc.
Signed-off-by: Mark Corbin <mark@dibsco.co.uk>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In commit a589325405
("support/config-fragments/autobuild: rename br-riscv64-musl config"),
the RISC-V 64-bit musl toolchain config snippet was renamed, but the
toolchain.csv file was not updated accordingly.
Due to this, utils/genrandconfig was no longer able to generate any
configuration.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a RISC-V 64-bit autobuild configuration for the internal
toolchain with musl.
Signed-off-by: Mark Corbin <mark.corbin@embecosm.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit replaces the two RISC-V configurations used for the
autobuilders to use pre-built external toolchains rather than internal
toolchains. This saves quite a bit of build time in the autobuilders,
and also allows people to reproduce build issues in a much more
efficient way, since rebuilding the toolchain is not needed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Mark Corbin <mark.corbin@embecosm.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add a minimal RISC-V 32-bit autobuild configuration for the
internal toolchain with glibc.
Signed-off-by: Mark Corbin <mark.corbin@embecosm.com>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a minimal RISC-V 64-bit autobuild configuration for the
internal toolchain with glibc.
Signed-off-by: Mark Corbin <mark.corbin@embecosm.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In preparation for the removal of the Blackfin architecture, drop the
autobuilder toolchain configuration that was testing Blackfin.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit reorganizes the toolchain-configs.csv so that the first
toolchains are a subset of "useful" toolchains to be tested by
contributors to validate a package. This subset is the one that will
be used by default by test-pkg.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
While we have several defconfigs building internal toolchains with
uClibc, we don't have any building internal toolchain with glibc and
musl. However, having such defconfigs is nice when we bump the C
library version, in order to immediately get feedback on build
failures.
Note that while the ARC internal defconfig uses glibc, it uses the
special ARC glibc version, so it doesn't test version bumps of the
upstream glibc C library.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
glibc is now supported for ARC so let's kick-start autobuilders
with glibc toolchain for ARC HS.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This column is not used by either genrandconfig or test-pkg, so remove
it.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We currently have a list of toolchain configurations that are used by
the autobuilders at [1]. However, this makes it a little more difficult
for people to use these configurations, and also to have a different
list of configurations for different branches. For example if a new
architecture is introduced, the 2017.02.x branch doesn't have support
for this architecture yet so it shouldn't try to run those configs.
Therefore, include the autobuild config fragments directly in Buildroot,
so they can be branched together with the rest. We create a new
directory under support/ to store them.
Generated with
wget -nd --no-parent --recursive http://autobuild.buildroot.net/toolchains/configs/
The index.html file is removed.
The toolchain-configs.csv file is adapted so the URLs become relative
paths pointing to the config fragments.
[1] http://autobuild.buildroot.net/toolchains/configs/toolchain-configs.csv
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
