There is no need for language translaion feature for the host
packages, anyway some of them disable it explicitly, so lets do it
automatically at least for the host-autotools- kind of packages.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
BR2_TOOLCHAIN_HAS_OPENMP is also selected by external toolchains, so
can be used by packages to determine OpenMP support.
Signed-off-by: Ed Blake <ed.blake@sondrel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Changes to build and runtime requirements:
* Python 3.4 or later is required to build the GNU C Library.
* On most architectures, GCC 5 or later is required to build the GNU C
Library. (On powerpc64le, GCC 6.2 or later is still required, as
before.)
While at it, remove the double "glibc-" prefix in the version.
https://www.sourceware.org/ml/libc-alpha/2019-01/msg00723.html
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
For the general case, appending values to variables is OK and also a
good practice, like this:
|PACKAGE_VAR = value1
|ifeq ...
|PACKAGE_VAR += value2
or this, when the above is not possible:
|PACKAGE_VAR = value1
|ifeq ...
|PACKAGE_VAR := $(PACKAGE_VAR), value2
But this override is an error:
|PACKAGE_VAR = value1
|PACKAGE_VAR = value2
as well this one:
|ifeq ...
|PACKAGE_VAR += value1
|endif
|PACKAGE_VAR = value2
And this override is error-prone:
|PACKAGE_VAR = value1
|ifeq ...
|PACKAGE_VAR = value2
Create a check function to warn about overridden variables.
Some variables are likely to have a default value that gets overridden
in a conditional, so ignore them. The name of such variables end in
_ARCH, _CPU, _SITE, _SOURCE or _VERSION.
After ignoring these variable names, there are a few exceptions to this
rule in the tree. For them use the comment that disables the check.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Simon Dawson <spdawson@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-by: Titouan Christophe <titouan.christophe@railnova.eu>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The patch refers to [1] which says "Unfortuantely, arm-gcc defaults to
generating code for armv5t." Since we always explicitly pass the target
CPU for ARM, the default CPU shouldn't matter.
As suggested by Arnout [2], a test based on qemu_arm_versatile_defconfig
has been done without this patch and there is no regression.
[1] https://sourceware.org/ml/crossgcc/2008-05/msg00009.html
[2] http://lists.busybox.net/pipermail/buildroot/2018-May/222104.html
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch is present in Buildroot since a long time and has been rebased on
several version of gcc without beqing upstreamed. Also it only concern
contrib/regression, which is not used at all during the build...
As suggested by Arnout [1], a test based on qemu_x86_defconfig has
been done without this patch and there is no regression.
[1] http://lists.busybox.net/pipermail/buildroot/2018-May/222104.html
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In commit cd9d58f1fc ("toolchain: bumb
ARC tools to arc-2018.09 release"), the ARC-specific binutils, gcc and
gdb versions were updated to use the 2018.09 release. However, they
are mistakenly pointing to a branch rather than a tag. This commit
fixes that by using the proper release tag.
Signed-off-by: Evgeniy Didin <Evgeniy.Didin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: arc-buildroot@synopsys.com
[Thomas: rework commit log]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This is what GCC manual says [1]:
-------------------------->8----------------------
--enable-__cxa_atexit
Define if you want to use __cxa_atexit, rather than atexit,
to register C++ destructors for local statics and global objects.
This is essential for fully standards-compliant handling of destructors,
but requires __cxa_atexit in libc.
This option is currently only available on systems with GNU libc
...
-------------------------->8----------------------
Important disadvantages of a simple atexit() are that [2]:
-------------------------->8----------------------
1999 C Standard only requires that the implementation support 32
registered functions, although most implementations support many more.
More important it does not deal at all with the ability in most implementations
to remove DSOs from a running program image by calling dlclose
prior to program termination.
-------------------------->8----------------------
Also it seems like all libc's we support in Buildroot (Glibc, uClibc and musl)
support __cxa_at_exit() so enable it unconditionally.
FWIW if we look around we'll see:
1. In OpenEmbedded it is enabled for everything except gcc-cross-initial: [3], [4]
2. In Crosstool-NG it is enabled by default: [5]
3. In OpenWrt it is disabled only for uClibc, otherwise enabled: [6]
So I think we should be good with it as well.
[1] https://gcc.gnu.org/install/configure.html
[2] https://itanium-cxx-abi.github.io/cxx-abi/abi.html#dso-dtor-motivation
[3] https://github.com/openembedded/openembedded-core/blob/master/meta/recipes-devtools/gcc/gcc-configure-common.inc#L59
[4] https://github.com/openembedded/openembedded-core/blob/master/meta/recipes-devtools/gcc/gcc-cross-initial.inc#L23
[5] https://github.com/crosstool-ng/crosstool-ng/blob/master/config/cc/gcc.in#L270
[6] https://github.com/openwrt/openwrt/blob/master/toolchain/gcc/common.mk#L170
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Nicolas Cavallari <Nicolas.Cavallari@green-communications.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Mark Corbin <mark.corbin@embecosm.com>
Cc: Romain Naour <romain.naour@gmail.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Cc: Claudiu Zissulescu <claziss@synopsys.com>
Cc: Cupertino Miranda <cmiranda@synopsys.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit finally bumps ARC tools to the most recent arc-2018.09 release version.
ARC GNU tools of version arc-2018.09 bring some quite significant changes like:
* Binutils v2.31.1 with additional ARC patches
* GCC 8.2.1 with additional ARC patches
* glibc 2.28 with additional ARC patches
More information on this release could be found here:
https://github.com/foss-for-synopsys-dwc-arc-processors/toolchain/releases/tag/arc-2018.09-release
Signed-off-by: Evgeniy Didin <Evgeniy.Didin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: arc-buildroot@synopsys.com
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The detection of pthread support fails on RISC-V unless _REENTRANT is
defined. This commit backports a patch that is already in upstream gcc
8.x to gcc 7.x to define _REENTRANT when -pthread is passed.
This will replace a number of package-specific fixes that have been
introduced to define _REENTRANT.
Signed-off-by: Mark Corbin <mark.corbin@embecosm.com>
[Thomas: tweak commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit bumps ARC toolchain to arc-2018.09-rc2,
which includes significant changes since arc-2018.09-rc1.
We want to test how new toolchain-rc2 builds packages,
so we can make fixes before release of toolcain.
This makes us closer to toolchain release which will be in a few weeks.
Please note that it is a release candidate and it might
contain some breakages, please don't use it for production builds.
Signed-off-by: Evgeniy Didin <Evgeniy.Didin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: arc-buildroot@synopsys.com
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit bumps ARC toolchain to arc-2018.09-rc1.
We want to test how new toolchain-rc1 builds packages,
so we can make fixes before release of toolcain.
ARC GNU tools of version arc-2018.09-rc1 bring some quite significant changes like:
* Binutils v2.31.1 with additional ARC patches
* GCC 8.2.1 with additional ARC patches
* glibc 2.28 with additional ARC patches
Please note that it is a release candidate and it might contain some
breakages, please don't use it for production builds.
Signed-off-by: Evgeniy Didin <didin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: arc-buildroot@synopsys.com
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
xtensa-uclinux uses bFLT executable file format that cannot relocate
fields representing offsets from data to code. C++ objects built as PIC
use offsets to encode FDE structures. As a result C++ exception handling
doesn't work correctly on xtensa-uclinux. Don't use PIC by default on
xtensa-uclinux.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We used to exclude GCC's test-suite for quite some time now
mostly for the sake of space reduction.
But:
1. On each GCC version bump we need to revise that functionality
as we need to accommodate changes in GCC sources and this
couldn't be automated
2. The space reduction is significant, but not huge. The two test
suites together take up 290MB, out of 660MB total for GCC (each of
them times two because there is the -initial and -final copy).
However, whenever we build GCC, we also have kernel headers (about
900MB) and a libc (e.g. glibc is 250MB). So at best, it saves less
than 20%.
3. It doesn't really save on build time either.
Below are timings of 2 runs on my laptop:
a) Vanilla master:
--------------------->8---------------------
time make host-gcc-final
real 7m15.114s
user 19m36.611s
sys 2m26.927s
--------------------->8---------------------
b) master + testsuite:
--------------------->8---------------------
time make host-gcc-final
real 7m59.860s
user 20m21.668s
sys 2m36.618s
--------------------->8---------------------
From figures above it's seen that difference is ~45 seconds
or ~10%. On both host-gcc-initial and -final we may save ~1.5
minutes... but these are not the only components we build and
compared to a total toolchain build time IMHO it is not that
much time to care especially traded for maintenance costs
on GCC version bumps.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Cc: Romain Naour <romain.naour@gmail.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
[Arnout: add explanation about size impact.]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Since commit 8f8e9162fa ("package/gcc:
do not mourn avr32 for too long..."), in which we dropped AVR32
support, the BR2_GCC_SUPPORTS_FINEGRAINEDMTUNE is always
'y'. Therefore, it is totally useless to keep this option around, and
this commit removes it, making the corresponding code unconditional
along the way.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
libcilkrts was introduced in gcc 4.9, and removed in gcc
8.x. Therefore, it does not make sense to pass --disable-libcilkrts in
gcc 8.x and higher. This commit introduces BR2_GCC_SUPPORTS_LIBCILKRTS
that allows the makefile code to know if the selected gcc version
supports libcilkrts or not.
This new option mainly allows to annotate the fact that libcilkrts
exists in gcc [4.9, 7] and that once we have dropped support for those
gcc versions, the libcilkrts related logic can be removed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The libcilkrts configure script errors out with "Pthreads are required
to build libcilkrts" if the C library doesn't have thread support. To
fix that, we disable libcilkrts when thread support is not available.
This issue was not noticed until now, because we only regularly build
a no-thread toolchain for ARM, and libcilkrts was enabled on ARM only
starting in gcc 7.x.
This fixes the build of no-thread toolchains on architectures where
libcilkrts is supported, i.e x86/x86-64, ARM and Sparc.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In commit 325bb37942, support for the
Blackfin architecture was removed. This was our only use of
BR2_GCC_TARGET_CPU_REVISION, and since this config option somewhat
complicates the calculation of the --with-cpu/-mcpu option values,
let's drop it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The BR2_GCC_TARGET_* configuration variables are copied to
corresponding GCC_TARGET_* variables which may then be optionally
modified or overwritten by architecture specific makefiles.
All makefiles must use the new GCC_TARGET_* variables instead
of the BR2_GCC_TARGET_* versions.
Signed-off-by: Mark Corbin <mark.corbin@embecosm.com>
[Thomas: simplify include of arch/arch.mk]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
With the following defconfig:
BR2_aarch64=y
BR2_BINUTILS_VERSION_2_28_X=y
BR2_GCC_VERSION_4_9_X=y
BR2_TOOLCHAIN_BUILDROOT_CXX=y
The build fail with this error:
In file included from ../sysdeps/ieee754/flt-32/math_config.h:23:0,
from ../sysdeps/ieee754/flt-32/e_expf.c:29:
../sysdeps/aarch64/fpu/math_private.h: In function 'roundtoint':
../sysdeps/aarch64/fpu/math_private.h:311:3: error: implicit declaration of function 'vrndn_f64' [-Werror=implicit-function-declaration]
return vget_lane_f64 (vrndn_f64 (vld1_f64 (&x)), 0);
^
cc1: all warnings being treated as errors
vrndn_f64 function has been introduced in glibc code since version 2.27 [1].
So we can't build a glibc based toolchain with gcc 4.9 anymore.
Add a new dependency in the toolchain infra to avoid selecting
glibc toolchain using gcc 4.9.
[1] https://sourceware.org/git/?p=glibc.git;a=commit;h=72aa623345ada1276ed89dbc00fdff9639cb8eaf
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When building on a ppc64le host we see this error:
build/genmatch --gimple ../../gcc/match.pd \
> tmp-gimple-match.c
../../gcc/match.pd:120:1 error: expected (, got NAME
negative value by 0 gives -0, not +0. */
This was reported upstream[1] and fixed on the GCC 6 [2] and GCC 7 [3]
branches:
Backport from mainline
2018-01-10 Kelvin Nilsen <kelvin@gcc.gnu.org>
* lex.c (search_line_fast): Remove illegal coercion of an
unaligned pointer value to vector pointer type and replace with
use of __builtin_vec_vsx_ld () built-in function, which operates
on unaligned pointer values.
The patches included in Buildroot contain just the code changes, and not
the changelog, to make it easer to manage backporting.
Tested on Ubuntu Cosmic ppc64le.
[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=86162
[2] https://gcc.gnu.org/viewcvs/gcc?view=revision&revision=261621
[3] https://gcc.gnu.org/viewcvs/gcc?view=revision&revision=262243
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes assembler failure when compiling for ARC700 only:
------------------------>8---------------------
{standard input}: Assembler messages:
{standard input}:213: Error: operand out of range (128 is not between -128 and 127)
make[2]: *** [scripts/Makefile.build:317: net/ipv4/xfrm4_mode_tunnel.o] Error 1
------------------------>8---------------------
This is an upstream fix scheduled for the next release, see
5afc07eeb1
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The compiler g++ reports an error when the header arm_acle.h is
included from version 7.
This patch backports the bugfix upstreamed [1] for gcc-7 and gcc-8.
Fixes:
In file included from ../../include/QtCore/5.10.1/QtCore/private/../../../../../src/corelib/tools/qsimd_p.h:333,
from ../../include/QtCore/5.10.1/QtCore/private/qsimd_p.h:1,
from global/qlogging.cpp:58:
/home/gportay/src/buildroot/output/host/lib/gcc/arm-buildroot-linux-gnueabihf/8.1.0/include/arm_acle.h: In function ‘void __arm_ldc(unsigned int, unsigned int, const void*)’:
/home/gportay/src/buildroot/output/host/lib/gcc/arm-buildroot-linux-gnueabihf/8.1.0/include/arm_acle.h:48:46: error: invalid conversion from ‘const void*’ to ‘const int*’ [-fpermissive]
return __builtin_arm_ldc (__coproc, __CRd, __p);
^~~
<built-in>: note: initializing argument 3 of ‘void __builtin_arm_ldc(unsigned int, unsigned int, const int*)’
...
Makefile:196: recipe for target 'sub-corelib-make_first' failed
make[3]: *** [sub-corelib-make_first] Error 2
Makefile:48: recipe for target 'sub-src-make_first' failed
make[2]: *** [sub-src-make_first] Error 2
package/pkg-generic.mk:229: recipe for target '/home/gportay/src/buildroot/output/build/qt5base-5.10.1/.stamp_built' failed
make[1]: *** [/home/gportay/src/buildroot/output/build/qt5base-5.10.1/.stamp_built] Error 2
Makefile:16: recipe for target '_all' failed
make: *** [_all] Error 2
[1]: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=81497
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit finally bumps ARC tools to the most recent arc-2018.03
release version.
ARC GNU tools of version arc-2018.03 bring some quite significant
changes like:
* Binutils v2.29.51 with additional ARC patches
* GCC 7.3.1 with additional ARC patches
* GDB 8.0.50 with ARC patches
More information on this release could be found here:
https://github.com/foss-for-synopsys-dwc-arc-processors/toolchain/releases/tag/arc-2018.03-release
Signed-off-by: Evgeniy Didin <didin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: arc-buildroot@synopsys.com
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
gcc-8.1 for xtensa miscompiles uClibc dynamic linker due to gcc PR
target/65416. The build completes successfully, but the binary is
non-functional because the following fragment in the _dl_get_ready_to_run
in ld-uClibc.so overwrites register spill area on stack causing register
corruption in the previous call frame and a subsequent crash:
419f: f0c1b2 addi a11, a1, -16
41a2: 1ba9 s32i.n a10, a11, 4
41a4: 0bc9 s32i.n a12, a11, 0
41a6: 5127f2 l32i a15, a7, 0x144
41a9: 1765b2 s32i a11, a5, 92
41ac: 4e2782 l32i a8, a7, 0x138
41af: 146af2 s32i a15, a10, 80
41b2: 001b10 movsp a1, a11
The crash terminates the init process and causes kernel panic.
The fix prevents reordering of movsp opcode and any access to the stack
frame memory and is applicable to all existing gcc versions.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Even if gcc 6 is still maintained for some time (gcc 6.5 is pending),
switch to gcc 7.x since it has been released since 2017-05-02 and
gcc 8.x is available since 2018-05-02.
We have been having toolchains in the autobuilders with gcc
7.x for a while, so the vast majority of the problems should have
already been solved.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Remove 0860-cilk-fix-build-without-wchar.patch since cilk has
been removed from gcc.
Rebase 0900-remove-selftests.patch on gcc 8.1.0
Remove upstream patches 0001-m68k-coldfire-pr68467.patch and
0892-microblaze-Revert.patch.
Use bz2 release tarball only for gcc 4.9 since all other version
now use xz tarball.
Runtime tested on x86_64 with binutils 2.30, gcc 8.1.0,
kernel headers 4.14 and glibc 2.27.
Buildtime tested with glibc with all supported architectures.
Buildtime tested on x86_64 with musl and uClibc-ng
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit bumps ARC toolchain to arc-2018.03-rc2, which
includes significant changes since arc-2018.03-rc1.
We want to test how new toolchain-rc2 builds packages,
so we can make fixes before release of toolcain.
This makes us closer to toolchain release which will be in a few weeks.
Please note that it is a release candidate
and it might contain some breakages,
please don't use it for production builds.
Signed-off-by: Evgeniy Didin <didin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: arc-buildroot@synopsys.com
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit bumps ARC toolchain to arc-2018.03-rc1.
We want to test how new toolchain-rc1 builds packages,
so we can make fixes before release of toolcain.
ARC GNU tools of version arc-2018.03-rc1 bring some quite significant changes like:
* Binutils v2.29.51 with additional ARC patches
* GCC 7.3.1 with additional ARC patches
Please note that it is a release candidate
and it might contain some breakages,
please don't use it for production builds.
Signed-off-by: Evgeniy Didin <didin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: arc-buildroot@synopsys.com
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The HOST_GCC_COMMON_WRAPPER_TARGET_FLOAT_ABI variable was incorrectly
used as HOST_GCC_COMMON_WRAPPER_TARGET_FLOATABI_, which would always
be empty.
In practice, this block of code is only used on Blackfin (which has
BR2_GCC_ARCH_HAS_CONFIGURABLE_DEFAULTS unset) and Blackfin doesn't use
float-abi, so this block of code is in fact useless. But even if it's
useless, it's better to have it without typos.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Theses packages are given as an example of the use of the *_DL_SUBDIR feature.
There maybe other packages that would benefit from that feature, they
would need to be added on a case by case basis.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Instead of DL_DIR, the package should now use $(PKG)_DL_DIR to ease the
transition into a new directory structure for DL_DIR.
This commit has been generated with the following scripts:
for i in $(find . -iname "*.mk"); do
if ! grep -q "\$(DL_DIR)" ${i}; then
continue
fi
pkg_name="$(basename $(dirname ${i}))"
[ "${pkg_name}" = "package" ] && continue
raw_pkg_name=$(echo ${pkg_name} | tr [a-z] [A-Z] | tr '-' '_')
pkg_dl_dir="${raw_pkg_name}_DL_DIR"
sed -i "s/\$(DL_DIR)/\$($pkg_dl_dir)/" ${i}
done
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As pointed out by Joel Stanley:
https://patchwork.ozlabs.org/patch/863011/
Github now longer provides the exact same tarball for the or1k musl-5.4.0
tarball, breaking the build. Even more, musl-5.4.0 is the name of a git
branch, not a tag.
Fix both problems by changing to the or1k-musl-5.4.0-20170218 tag, which
points to the exact same git commit.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Tested-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
