The project at https://github.com/linux4sam/at91bootstrap was until
now releasing 3.x versions, which were packaged using
boot/at91bootstrap3/ in Buildroot. Microchip has now started a new
branch of at91bootstrap, called 4.x, which will only support the
following devices: sam9x60, sama5d2, sama5d3, sama5d4, sama7g5. A
number of older devices from Microchip will only be supported by the
existing 3.x series.
Therefore, we cannot simply remove support for the 3.x series, and
allow using only the 4.x series.
So what this commit does is extend the boot/at91bootstrap3 package to
support building both 3.x and 4.x versions. In detail, this implies:
* Having the BR2_TARGET_AT91BOOTSTRAP3_LATEST_VERSION symbol point to
the latest 4.x version. Indeed, we want
BR2_TARGET_AT91BOOTSTRAP3_LATEST_VERSION to really point to the
latest upstream version, even if that means potential breakage for
users. Users who want to use a fixed version of at91bootstrap
should anyway not be using
BR2_TARGET_AT91BOOTSTRAP3_LATEST_VERSION.
* Introduce BR2_TARGET_AT91BOOTSTRAP3_LATEST_VERSION_3X for users who
would like to use the latest 3.x series.
* Adjust the installation logic, as images to install are now in
build/binaries/*.bin instead of binaries/*.bin. In order to not
have to differentiate 3.x and 4.x, we simply use $(wildcard ...) to
expand the list of files to install.
* To make it clear that boot/at91bootstrap3 supports both 3.x and
4.x, we also update the prompt of the package.
at911bootstrap does not carry a license file; so far we were using
main.c as the license file, as it carries the license blurb. Now that we
have a known alternate version, we would need a per-version hash for
that file. However, this is a bit too cumbersome to handle, so just drop
using main.c as the license file. When upstream introduces a proper
license file, we can revisit the situation.
Update the two defconfigs that were using the upstream 3.9.3 version;
all other defconfigs are using custom tarballs or custom git trees.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
[Thomas: while this patch is based on previous work by Eugen, it was
reworked quite significantly.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr:
- drop main.c as license file, explain why
- update the two defconfigs
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
EDK2 is a modern, feature-rich, cross-platform firmware development
environment for the UEFI and PI specifications.
The initial version of this bootloader package makes it possible to
build firmware for the following seven configurations:
* QEMU x86-64 pc machine
* QEMU aarch64 virt machine, booting directly from flash
* QEMU aarch64 virt machine, booting via the kernel protocol
* QEMU aarch64 sbsa-ref machine
* ARM FVP vexpress machine
* Socionext SynQuacer Developerbox
* SolidRun MacchiatoBin
Support the use of EDK2 UEFI payloads as BL33 in ARM Trusted Firmware.
Signed-off-by: Dick Olsson <hi@senzilla.io>
[yann.morin.1998@free.fr:
- duplicate defaults in Config.in
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
With the addition of support for custom opensbi version in commit
5c7166d387 (boot/opensbi: add support for version configuration), we can no
longer be sure that the license file name / hash will be correct in all
cases, so only specify COPYING.BSD when _LATEST_VERSION is used, similar to
how we do it for the Linux kernel.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
With the addition of support for custom opensbi version in commit
5c7166d387 (boot/opensbi: add support for version configuration), we can no
longer be sure that the Buildroot patches can be applied - So move them to a
0.9 subdir to ensure they are only applied when the _LATEST_VERSION is used.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 3b551f68a5 (boot/beaglev-ddrlnit: rename to beaglev-ddrinit to
match renamed upstream repo) forgot to update the include in boot/Config.in,
breaking menuconfig.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This packages allows to build the first stage bootloader used on the
BeagleV, which is used even before the DDR initialization and
OpenSBI/U-Boot. Yes, "secondboot" is strange for what is the first
stage bootloader, but that's the upstream name.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
[yann.morin.1998@free.fr:
- add hash file
- commit is HEAD only right now, so don't reference HEAD
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This commit adds a package for the DDR initialization code used on the
BeagleV platform.
The typo in the package name is upstream's typo, and we just keep it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
[yann.morin.1998@free.fr:
- upstream name is beaglev_ddrlnit, not *init (keep their typo)
- rename package and variables accordingly
- the referenced commit is no longer the HEAD of said branch
- add a hash file
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Until now, whenever a BR2_TARGET_OPENSBI_PLAT value was specified,
opensbi.mk was assuming that both fw_jump and fw_dynamic would be
produced. However, this is not the case: the OpenSBI per-platform
config.mk can decide which image to build.
As an example, the config.mk for VIC7100-based BeagleV only enables
producing the fw_payload image.
This commit adds three options to enable the installation of images:
one for fw_jump, one for fw_dynamic, one for fw_payload.
The options for fw_jump and fw_dynamic are "default y" when
BR2_TARGET_OPENSBI_PLAT is not empty, to preserve existing behavior.
The option for fw_payload is forcefully selected when either Linux or
U-Boot are selected as payloads.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The opensbi package already allows to use Linux as a payload for
OpenSBI, but in some cases, U-Boot as payload is useful. This commit
adds a BR2_TARGET_OPENSBI_UBOOT_PAYLOAD option, modeled after the
existing BR2_TARGET_OPENSBI_LINUX_PAYLOAD.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
OpenSBI contains platform-specific code, so very much like Linux,
U-Boot or other bootloaders, using the upstream version of OpenSBI
will very often not be sufficient.
This commit therefore adds the possibility of specifying a custom
version of OpenSBI, either custom from upstream, custom tarball, or
custom from Git. Support for other version control systems has not
been implemented for now, but could be added later if needed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The old at91bootstrap version (1.x) uses a strange variant of the BSD
license, called "BSD Source Code Attribution" and referenced by SPDX
as BSD-Source-Code.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
shim 15.4 builds just fine on ARM32.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Use the tarball provided by upstream developers instead of the one
generated by Github. Indeed
https://github.com/rhboot/shim/releases/tag/15.4 indicates "As
usual, please use the shim-15.4.tar.bz2 tarball, rather than the
other two archives github automatically produces."
- The tarball now includes the gnu-efi code, so we no longer need to
select gnu-efi and have it as a build dependency. We continue to use
BR2_PACKAGE_GNU_EFI_ARCH_SUPPORTS as we still only build for those
architectures that have gnu-efi support. We also drop the
EFI_INCLUDE, EFI_PATH and LIBDIR variables, as gnu-efi no longer
needs to be searched in STAGING_DIR.
- Drop all four patches, which were backports from upstream.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Backport a set of upstream patches to fix:
MokManager.c: In function ‘write_back_mok_list’:
MokManager.c:1081:19: error: taking address of packed member of ‘struct <anonymous>’ may result in an unaligned pointer value [-Werror=address-of-packed-member]
1081 | if (CompareGuid(&(list[i].Type), &X509_GUID) == 0)
| ^~~~~~~~~~~~~~~
MokManager.c:1103:19: error: taking address of packed member of ‘struct <anonymous>’ may result in an unaligned pointer value [-Werror=address-of-packed-member]
1103 | if (CompareGuid(&(list[i].Type), &X509_GUID) == 0) {
| ^~~~~~~~~~~~~~~
MokManager.c: In function ‘delete_cert’:
MokManager.c:1144:19: error: taking address of packed member of ‘struct <anonymous>’ may result in an unaligned pointer value [-Werror=address-of-packed-member]
1144 | if (CompareGuid(&(mok[i].Type), &X509_GUID) != 0)
| ^~~~~~~~~~~~~~
MokManager.c: In function ‘delete_hash_in_list’:
MokManager.c:1195:20: error: taking address of packed member of ‘struct <anonymous>’ may result in an unaligned pointer value [-Werror=address-of-packed-member]
1195 | if ((CompareGuid(&(mok[i].Type), &Type) != 0) ||
| ^~~~~~~~~~~~~~
MokManager.c: In function ‘delete_keys’:
MokManager.c:1359:19: error: taking address of packed member of ‘struct <anonymous>’ may result in an unaligned pointer value [-Werror=address-of-packed-member]
1359 | if (CompareGuid(&(del_key[i].Type), &X509_GUID) == 0) {
| ^~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
make[1]: *** [<builtin>: MokManager.o] Error 1
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
shim fails to build with:
console.c:448:5: error: ‘EFI_WARN_UNKOWN_GLYPH’ undeclared here (not in a function); did you mean ‘EFI_WARN_UNKNOWN_GLYPH’?
448 | { EFI_WARN_UNKOWN_GLYPH, L"Warning Unknown Glyph"},
| ^~~~~~~~~~~~~~~~~~~~~
| EFI_WARN_UNKNOWN_GLYPH
make[2]: *** [<builtin>: console.o] Error 1
make[2]: *** Waiting for unfinished jobs....
Backport upstream commit d230d02f990f02293736dca78b108f86c86d1bd0 to
resolve this issue.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
An analysis of the last 3 remaining CVEs that are reported to affect
the grub2 package has allowed to ensure that we can safely ignore
them:
* CVE-2020-14372 is already fixed by a patch we have in our patch
stack for grub2
* CVE-2019-14865 and CVE-2020-15705 are both distro-specific and do
not affect grub2 upstream, nor grub2 with the stack of patches we
have in Buildroot
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The BR2_TOOLCHAIN_HAS_BINUTILS_BUG_19615 and
BR2_TOOLCHAIN_HAS_BINUTILS_BUG_20006 options were last selected by the
BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_AMD64 toolchain, but this
toolchain has been removed as part of commit
d87e114a8f in August 2020.
It's time to get rid of those two options that are never enabled.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Details: https://lists.gnu.org/archive/html/grub-devel/2021-03/msg00007.html
As detailed in commit 7e64a050fb, it is
difficult to utilize the upstream patches directly, so a number of
patches include changes to generated files so that we don't need invoke
the gentpl.py script.
In addition to the security fixes, these required patches has been
backported:
f76a27996 efi: Make shim_lock GUID and protocol type public
04ae030d0 efi: Return grub_efi_status_t from grub_efi_get_variable()
ac5c93675 efi: Add a function to read EFI variables with attributes
d7e54b2e5 efi: Add secure boot detection
The following security issues are fixed:
CVE-2020-14372 grub2: The acpi command allows privileged user to load crafted
ACPI tables when Secure Boot is enabled
CWE-184
7.5/CVSS:3.1/AV:L/AC:H/PR:H/UI:N/S:C/C:H/I:H/A:H
GRUB2 enables the use of the command acpi even when Secure Boot is signaled by
the firmware. An attacker with local root privileges to can drop a small SSDT
in /boot/efi and modify grub.cfg to instruct grub to load said SSDT. The SSDT
then gets run by the kernel and it overwrites the kernel lock down configuration
enabling the attacker to load unsigned kernel modules and kexec unsigned code.
Reported-by: Máté Kukri
*******************************************************************************
CVE-2020-25632 grub2: Use-after-free in rmmod command
CWE-416
7.5/CVSS:3.1/AV:L/AC:H/PR:H/UI:N/S:C/C:H/I:H/A:H
The rmmod implementation for GRUB2 is flawed, allowing an attacker to unload
a module used as dependency without checking if any other dependent module is
still loaded. This leads to an use-after-free scenario possibly allowing an
attacker to execute arbitrary code and by-pass Secure Boot protections.
Reported-by: Chris Coulson (Canonical)
*******************************************************************************
CVE-2020-25647 grub2: Out-of-bound write in grub_usb_device_initialize()
CWE-787
6.9/CVSS:3.1/AV:P/AC:H/PR:H/UI:N/S:C/C:H/I:H/A:H
grub_usb_device_initialize() is called to handle USB device initialization. It
reads out the descriptors it needs from the USB device and uses that data to
fill in some USB data structures. grub_usb_device_initialize() performs very
little bounds checking and simply assumes the USB device provides sane values.
This behavior can trigger memory corruption. If properly exploited, this would
lead to arbitrary code execution allowing the attacker to by-pass Secure Boot
mechanism.
Reported-by: Joseph Tartaro (IOActive) and Ilja van Sprundel (IOActive)
*******************************************************************************
CVE-2020-27749 grub2: Stack buffer overflow in grub_parser_split_cmdline
CWE-121
7.5/CVSS:3.1/AV:L/AC:H/PR:H/UI:N/S:C/C:H/I:H/A:H
grub_parser_split_cmdline() expands variable names present in the supplied
command line in to their corresponding variable contents and uses a 1kB stack
buffer for temporary storage without sufficient bounds checking. If the
function is called with a command line that references a variable with a
sufficiently large payload, it is possible to overflow the stack buffer,
corrupt the stack frame and control execution. An attacker may use this to
circumvent Secure Boot protections.
Reported-by: Chris Coulson (Canonical)
*******************************************************************************
CVE-2020-27779 grub2: The cutmem command allows privileged user to remove
memory regions when Secure Boot is enabled
CWE-285
7.5/CVSS:3.1/AV:L/AC:H/PR:H/UI:N/S:C/C:H/I:H/A:H
The GRUB2's cutmem command does not honor Secure Boot locking. This allows an
privileged attacker to remove address ranges from memory creating an
opportunity to circumvent Secure Boot protections after proper triage about
grub's memory layout.
Reported-by: Teddy Reed
*******************************************************************************
CVE-2021-3418 - grub2: GRUB 2.05 reintroduced CVE-2020-15705
CWE-281
6.4/CVSS:3.1/AV:L/AC:H/PR:H/UI:N/S:U/C:H/I:H/A:H
The GRUB2 upstream reintroduced the CVE-2020-15705. This refers to a distro
specific flaw which made upstream in the mentioned version.
If certificates that signed GRUB2 are installed into db, GRUB2 can be booted
directly. It will then boot any kernel without signature validation. The booted
kernel will think it was booted in Secure Boot mode and will implement lock
down, yet it could have been tampered.
This flaw only affects upstream and distributions using the shim_lock verifier.
Reported-by: Dimitri John Ledkov (Canonical)
*******************************************************************************
CVE-2021-20225 grub2: Heap out-of-bounds write in short form option parser
CWE-787
7.5/CVSS:3.1/AV:L/AC:H/PR:H/UI:N/S:C/C:H/I:H/A:H
The option parser in GRUB2 allows an attacker to write past the end of
a heap-allocated buffer by calling certain commands with a large number
of specific short forms of options.
Reported-by: Daniel Axtens (IBM)
*******************************************************************************
CVE-2021-20233 grub2: Heap out-of-bound write due to mis-calculation of
space required for quoting
CWE-787
7.5/CVSS:3.1/AV:L/AC:H/PR:H/UI:N/S:C/C:H/I:H/A:H
There's a flaw on GRUB2 menu rendering code setparam_prefix() in the menu
rendering code performs a length calculation on the assumption that expressing
a quoted single quote will require 3 characters, while it actually requires
4 characters. This allow an attacker to corrupt memory by one byte for each
quote in the input.
Reported-by: Daniel Axtens (IBM)
*******************************************************************************
Signed-off-by: Stefan Sørensen <stefan.sorensen@spectralink.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
If PER_PACKAGE_DIRECTORIES=Y and using host-make package (because
BR2_FORCE_HOST_BUILD=Y or local make is too old) .stamp_dotconfig
target needs per-package/uboot/host/bin/host-make that doesn't
exist yet.
Add host-make into UBOOT_KCONFIG_DEPENDENCIES.
Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@foss.st.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit ca1604388a updated the checksum of
the tarball, but failed to update the one of main.c, which serves as a
license file.
Signed-off-by: Edgar Bonet <bonet@grenoble.cnrs.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Bump OP-TEE OS package version to OP-TEE release 3.12.0.
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
since 2021.01, tools/binman is broken.
tools/binman/control.py imports pkg_resources
the module pkg_resources is supplied by setuptools,
so this new dependency is required.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 5b95a5dc2 (support/download: change format of archives generated
from git) changed the way the archives generated from git repositories
are named, adding a "format-version" identifier right between the
package version and the file extension.
Commit c043ecb20 (support/download: change format of archives generated
from svn) did so for archives generated from a subversion checkout.
However, for a few packages, we manually force the _SOURCE variable,
because we want to share the archive with another package, to avoid
downloading and storing those archives twice. This is the case for:
- linux-headers and linux
- barebox-aux and barebox
When the generated tarballs were renamed with the aforementioned
commits, those packages were not updated accordingly.
Fix that by manually propagating the per-site-method format-version.
Reported-by: "Stephane Viau (OSS)" <stephane.viau@oss.nxp.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: "Stephane Viau (OSS)" <stephane.viau@oss.nxp.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Some RISC-V platforms (such as SiFive HiFive Unleashed) encapsulate
the OpenSBI firmware image inside U-Boot.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Switch to using the tarball helper, that can generate reproducible
archives whatever the tar version >= 1.27.
However, those archives are not identical to the previous ones generated
in the (now-broken) gnu format.
To avoid any clashing between old and new archives, and new and old
Buildroot versions, we need to name the new generated archives
differently from the existing ones.
So, we bump the git-specific format-version to -br1.
The %ci date has been supported by git back to 1.6.0, released August
2008); it is not strictly ISO8601, but is still accepted as a PAX date
header. The strict ISO8601 placeholder, %cI, was only introduced with
2.2.0, release in November 2014, so too recent to be widely available.
As the format and the names of the archives changes, we need to update
all the hash files with the new names and hashes.
Of all the bootloaders that have a git download method, vexpress-firmware
is the only one to have a hash. Others have no hash files, or they have
explicitly set BR_NO_CHECK_HASH_FOR.
For the packages, linux-headers is the special snowflake, as the git
download is only for custom git tree, so it is excluded from the hash
verification with BR_NO_CHECK_HASH_FOR.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Vincent Fazio <vfazio@xes-inc.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Vincent Fazio <vfazio@xes-inc.com>
---8<------8<------8<------8<---
#!/bin/sh
# Find and download all packages using git as backend.
# Manually fix hashes for affected packages.
# Packages that only have a host variant
HOST_ONLY='imx-mkimage|mxsldr|netsurf-buildsystem|opkg-utils|prelink-cross|qoriq-rcw|vboot-utils'
# Packages that have a non-git main _SOURCE, and/or which
# have BR_NO_CHECK_HASH_FOR for the git _SOURCE
NOT_GIT='aufs|aufs-util|xenomai|linux-headers'
export BR2_DL_DIR=$(pwd)/temp-dl-dir
make defconfig
make $( git grep -l -E 'SITE_METHOD[[:space:]]*:?=[[:space:]]*git\>|_SITE[[:space:]]*:?=[[:space:]]*git:' \
boot/vexpress-firmware/ package/ \
|sed -r -e 's,.*/([^/]+)\.mk,\1,' \
|sed -r -e '/^('"${NOT_GIT}"')$/d;' \
-e 's/^('"${HOST_ONLY}"')/host-\1/;' \
-e 's/$/-legal-info/;'
)
---8<------8<------8<------8<---
This patch adds CPE ID information for a significant number of
packages.
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump bootwrapper to the latest version.
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Rebase on the mv-ddr-devel branch as the release branches are no longer
maintained.
Signed-off-by: Dick Olsson <hi@senzilla.io>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Required in order to build properly with the latest stable release of
EDK2 UEFI firmware.
Signed-off-by: Dick Olsson <hi@senzilla.io>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
In barebox v2020.09.0, kconfig has been updated to a newer version
based on Linux 5.9-rc2. As in linux, kconfig can call the compiler
to test its capabilities.
We have no way to know if a custom version would require it or not,
so we just unconditionally depend on the toolchain
Signed-off-by: Jules Maselbas <jmaselbas@kalray.eu>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The upstream git tree has disappeared, but a ZIP file is still hosted
somewhere at NXP. The content of that zip file has been verified to be
100% identical to the tarball we hosted on s.b.o.
As this is a zip file, we can't use the generic extract commands, and
must come up with our own. As such, it no longer makes sense to fix the
CRLF as a post-extract hook; this is moved to the extract command.
Add a hash file while at it.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
TF-A supports stack smashing protection (-fstack-protector-*).
However, that feature is currently silently disabled because
ENABLE_STACK_PROTECTOR is not set during build time.
As documented in the TF-A user guide, the flag ENABLE_STACK_PROTECTOR
is required to enable stack protection support. When enabled the symbols
for the stack protector (e.g. __stack_chk_guard) are built.
This needs to be done because TF-A does not link against an external
library that provides that symbols (e.g. libc).
So in case we see that BR2_SSP_* is enabled, let's enable the corresponding
ENABLE_STACK_PROTECTOR build flag for TF-A as documented in the TF-A user guide.
This patch also fixes a the following linker errors with older TF-A versions
if BR2_SSP_* is enabled (i.e. -fstack-protector-* is used as compiler flag)
and ENABLE_STACK_PROTECTOR is not set, which are caused by the missing
stack protector symbols:
[...]
params_setup.c:(.text.params_early_setup+0xc): undefined reference to `__stack_chk_guard'
aarch64-none-linux-gnu-ld: params_setup.c:(.text.params_early_setup+0x14): undefined reference to `__stack_chk_guard'
aarch64-none-linux-gnu-ld: params_setup.c:(.text.params_early_setup+0x104): undefined reference to `__stack_chk_guard'
aarch64-none-linux-gnu-ld: params_setup.c:(.text.params_early_setup+0x118): undefined reference to `__stack_chk_fail'
aarch64-none-linux-gnu-ld: ./build/px30/release/bl31/pmu.o: in function `rockchip_soc_sys_pwr_dm_suspend':
pmu.c:(.text.rockchip_soc_sys_pwr_dm_suspend+0xc): undefined reference to `__stack_chk_guard'
[...]
TF-A releases after Nov 2019, that include 7af195e29a4, will circumvent
these issue by explicitliy and silently disabling the stack protector
by appending '-fno-stack-protector' to the compiler flags in case
ENABLE_STACK_PROTECTOR is not set.
Tested on a Rockchip PX30 based system (TF-A v2.2 and upstream/master).
Signed-off-by: Christoph Müllner <christoph.muellner@theobroma-systems.com>
Reviewed-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
When using a custom git or mercurial repository for u-boot the error message
indicating a version had not been provided incorrectly stated that the URL was
missing. Update the error message to indicate that it's the version that's
missing.
Signed-off-by: Garret Kelly <garret.kelly@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump OP-TEE OS package version to OP-TEE release 3.11.0.
Remove patches since merged in OP-TEE OS 3.11.0
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add `.stm32` binary format that U-Boot generates for the trusted
configuration of STM32MP platforms.
Signed-off-by: Shlomi Vaknin <shlomi.39sd@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
For consistancy and dependencies between uboot and uboot-tools,
this patch migrates the script creation over in a similar way as
the env image creation.
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Migrating the support for this feature to uboot-tools to gain the
ability to build env files when BR2_TARGET_UBOOT isn't selected.
When _ENVIMAGE_SOURCE is not set, we generate a default environment.
However, this default depends on the U-Boot configuration. Therefore,
this can only be done if uboot itself is built as well, and
host-uboot-tools needs to depend on uboot.
For the same reason, the commands for creating the environment have to
be adapted a little. Take this occasion to drastically simplify them.
Note: This patch creates a circular dependency with uboot until the
similar migration patch is merged for uboot scripts
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
It's easier to locate given format when it's sorted.
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The buildroot custom bareboxenv compile command misses the additional
include path 'scripts/include' to gain access to the local copy of the
kernel header files (which leads to compile error when using an older
toolchain).
This could be fixed by enhancing the custom bareboxenv compile command
(see [1]) or by using the barebox build system by simply enabling the
CONFIG_BAREBOXENV_TARGET option (available since April 2012, see [2])
instead (as suggested by Yann E. MORIN).
Fixes (with BR2_TARGET_BAREBOX_BAREBOXENV enabled):
build/barebox-2019.12.0/scripts/bareboxenv.c💯10: fatal error: linux/list.h: No such file or directory
[1] http://lists.busybox.net/pipermail/buildroot/2020-January/270942.html
[2] https://git.pengutronix.de/cgit/barebox/commit/?id=afb03d7a554a2911a3742e316f011319fcb416f1
Note: a user who would previously provide a barebox config file which
had CONFIG_BAREBOXENV_TARGET=y, but a Buildroot config file which did
not have BR2_TARGET_BAREBOX_BAREBOXENV=y, would have bareboxenv-target
built, but it would not be installed in the target. Now, and unset
BR2_TARGET_BAREBOX_BAREBOXENV will not even build it, but his is not a
regression: it was anyway previously not installed.
Reported-by: Frederick Gotham <cauldwell.thomas@gmail.com>
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
[yann.morin.1998@free.fr:
- also explicitly disable it when not selected
- rewrap commit log
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This commit adds a patch that passes -fno-builtin to fix the build
with gcc 10. The patch has been submitted upstream.
There are no autobuilder failures, since it's a bootloader package,
and therefore not tested by the autobuilders. However, a build failure
was detected when building toolchains and a minimal ARMv7-M system at
https://gitlab.com/bootlin/toolchains-builder/-/jobs/729359529.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Recent versions of OP-TEE depend on Python 3. Currently, OP-TEE is
building with the Python interpreter provided by the user. This patch
includes an upstream patch that makes the interpreter configurable,
and makes use of this configuration with host-python3.
Signed-off-by: Dick Olsson <hi@senzilla.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
U-Boot must use $(BR2_MAKE) as it uses a Make feature from v4.0. We
already use $(BR2_MAKE) in the BUILD_CMDS, but the kconfig commands
still uses $(MAKE). Without this fix, building U-Boot with kconfig will
fail with the following cryptic error.
> Makefile:37: *** missing separator. Stop.
Signed-off-by: Brandon Maier <brandon.maier@rockwellcollins.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Enable this bootloader for cortex a7 based SoCs: support for the
sama7g5 SoC is now in upstream at91bootstrap3, and it is a Cortex-A7
based SoC.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Details: https://lists.gnu.org/archive/html/grub-devel/2020-07/msg00034.html
Fixes the following security issues:
* CVE-2020-10713
A flaw was found in grub2, prior to version 2.06. An attacker may
use the GRUB 2 flaw to hijack and tamper the GRUB verification
process. This flaw also allows the bypass of Secure Boot
protections. In order to load an untrusted or modified kernel, an
attacker would first need to establish access to the system such as
gaining physical access, obtain the ability to alter a pxe-boot
network, or have remote access to a networked system with root
access. With this access, an attacker could then craft a string to
cause a buffer overflow by injecting a malicious payload that leads
to arbitrary code execution within GRUB. The highest threat from
this vulnerability is to data confidentiality and integrity as well
as system availability.
* CVE-2020-14308
In grub2 versions before 2.06 the grub memory allocator doesn't
check for possible arithmetic overflows on the requested allocation
size. This leads the function to return invalid memory allocations
which can be further used to cause possible integrity,
confidentiality and availability impacts during the boot process.
* CVE-2020-14309
There's an issue with grub2 in all versions before 2.06 when
handling squashfs filesystems containing a symbolic link with name
length of UINT32 bytes in size. The name size leads to an
arithmetic overflow leading to a zero-size allocation further
causing a heap-based buffer overflow with attacker controlled data.
* CVE-2020-14310
An integer overflow in read_section_from_string may lead to a heap
based buffer overflow.
* CVE-2020-14311
An integer overflow in grub_ext2_read_link may lead to a heap-based
buffer overflow.
* CVE-2020-15706
GRUB2 contains a race condition in grub_script_function_create()
leading to a use-after-free vulnerability which can be triggered by
redefining a function whilst the same function is already
executing, leading to arbitrary code execution and secure boot
restriction bypass
* CVE-2020-15707
Integer overflows were discovered in the functions grub_cmd_initrd
and grub_initrd_init in the efilinux component of GRUB2, as shipped
in Debian, Red Hat, and Ubuntu (the functionality is not included
in GRUB2 upstream), leading to a heap-based buffer overflow. These
could be triggered by an extremely large number of arguments to the
initrd command on 32-bit architectures, or a crafted filesystem
with very large files on any architecture. An attacker could use
this to execute arbitrary code and bypass UEFI Secure Boot
restrictions. This issue affects GRUB2 version 2.04 and prior
versions.
Signed-off-by: Stefan Sørensen <stefan.sorensen@spectralink.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump OP-TEE OS package version to OP-TEE release 3.9.0.
Update patch on pydrypto/pycryptodome to match 3.9.0.
Add patch on CFG_OPTEE_REVISION_MINOR that was not updated in release
3.9.0 and fixed only few commits above.
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Tested-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Before now, U-Boot SPL could only load the Platform Management Unit
(PMU) by patching the board-specific pm_cfg_obj.c file into the generic
PMU firmware, but that then requires generating a new PMU firmware for
every board configuration. To fix that, Luca Ceresoli added support to
U-Boot to load the pm_cfg_obj[1].
Like the PMU firmware, we need a way to pass the PMU cfg to U-Boot
during build. U-Boot only accepts the binary format of the cfg, so we
must convert the source file with the tool provided with U-Boot.
[1] https://lucaceresoli.net/zynqmp-uboot-spl-pmufw-cfg-load/
Signed-off-by: Brandon Maier <brandon.maier@rockwellcollins.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The OpenSBI platform 'qemu/virt' has been removed in v0.8. Builds for
the QEMU 'virt' machine can use the 'generic' platform instead.
Tested with qemu_riscv32_virt_defconfig and
qemu_riscv64_virt_defconfig using Buildroot host-qemu 5.0.0.
Signed-off-by: Mark Corbin <mark@dibsco.co.uk>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
[yann.morin.1998@free.fr: two spaces in hash file]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Backport a patch from upstream to fix the build on certain versions of
gsc, notably:
Ubuntu 19.10 with gcc (Ubuntu 8.3.0-26ubuntu1~19.10) 8.3.0
Ubuntu 19.10 with gcc (Ubuntu 9.2.1-9ubuntu2) 9.2.1 20191008
The upstream patch is simply a change in the gentpl.py script, which is
used to generate parts of the automake machinery, so if we just backport
the upstream patch, we need to call the script to regenerate those files.
However, the modified script is a python script, so we would need to add
a dependency on host-python (2 or 3), which is not so nice.
Furthermore, calling the script is not enough: it needs a specific set
of optionss for each file it is to generate. That set of options is not
static; it is constructed in the convoluted autogen.sh. Calling
autogen.sh is usally not so good an idea in the Buildroot context, and
indeed this fails becasue it calls to autoreconf, but without our
carefuly crafted options and environment variables.
There was a little light in the tunnel, in that autogen.sh can be told
not to run autoreconf, by setting the environemnt variable
FROM_BOOTSTRAP to an non-=empty string, but this is fraught with various
other side-effects, as in that cause, autogen.sh expects to be valled by
an upper sciopt, bootstrap, which is not provided in the tarball
distribution...
So, between all those issues, autogen, bootstrap, and a host-python (2
or 3) dependency, we choose another route: path the script *and* the one
generated file affected by the change. Since that patched file is a .am
file, we also patch the corresponding .in file
However, we're faced with another issue: the other generated file is
now older than the script, so the automake machinery will now want to
re-run autoconf et al during the build step, which is still not a good
idea for us. So we touch the other generated file so it is mopre recent
than the script.
This is still not sufficient, because the patched file also has a
dependency on the generated file, so we need to touch as well.
Fixes:
- https://bugs.buildroot.org/show_bug.cgi?id=12946
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr:
- keep the hunk about patching gentpl.py
- make it a git-formatted patch
- add the touch
- drastically expand the commit log
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The HTTPS URL seems to be more reliable and quicker for download than
FTP. FTP may also be a blocked protocol on some sites and in CI/CD
setups.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
A few conflicts had to be resolved:
- Version number and hash for mesa3d-headers/mesa3d
- Patches added in qemu, and the qemu version number
- The gnuconfig README.buildroot
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The commit [1] "licensing info is only valid for v1.4" fixed the legal-info
issues when a custom ATF tarball or a version from git is used.
But we need to ignore licencing for a used defined official ATF version.
Althougt the ATF version are licensed under BSD-3-Clause, the license
file can be updated between version (for example between v1.4 and v2.0).
Ignore the licencing check if the user provide a custom official version.
[1] d1a61703f7
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
[yann.morin.1998@free.fr: use positive logic with the _LATEST option]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
>From [1] included in optee-os release 3.7.0:
"PyCryptodome is a fork of PyCrypto, which is not maintained any more
(the last release dates back to 2013 [2]). It exposes almost the same
API, but there are a few incompatibilities [3]."
pem_to_pub_c.py/sign.py scripts still use pycrypto that is replaced
by pycryptodomex. Add a patch to use pycryptodomex but don't use
upstream commit since it also switches from the algorithm
TEE_ALG_RSASSA_PKCS1_V1_5_SHA256 to TEE_ALG_RSASSA_PKCS1_PSS_MGF1_SHA256
when replacing pycrypto to pycryptodomex [4].
[1] 90ad245043
[2] https://pypi.org/project/pycrypto/#history
[3] https://pycryptodome.readthedocs.io/en/latest/src/vs_pycrypto.html
[4] ababd72d2f
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/526035730
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
U-Boot versions newer than 2020.01 use Python 3.x instead of Python
2.x in various scripts.
We already had the BR2_TARGET_UBOOT_NEEDS_PYLIBFDT and
BR2_TARGET_UBOOT_NEEDS_PYELFTOOLS options, but depending on the U-Boot
version, we now need to indicate if Python 2.x or Python 3.x should be
used.
In addition, it turns out that some U-Boot configurations need a
Python interpreter, without needing pylibfdt or pyelftools. Some of
our defconfigs were abusing the BR2_TARGET_UBOOT_NEEDS_PYLIBFDT option
to make sure a Python interpreter was built.
To solve this issue, we introduce a choice, that let the users specify
what, if any, host python version is needed. The default is 'no', to
preserve the previous behaviour, unless any of the pylibfdt or the
pyelftools options is enabled, in which case we hide the 'no' option,
and use python 2 by default. This dfault is guaranteed by the order of
options in the choice.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr:
- explicitly make the choice a bool
- make BR2_TARGET_UBOOT_NEEDS_PYTHON a blind option
- introduce the 'no' option in the choice
- reword the commit log accordingly
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The following defconfig:
BR2_x86_i686=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD=y
BR2_TOOLCHAIN_EXTERNAL_URL="http://toolchains.bootlin.com/downloads/releases/toolchains/x86-i686/tarballs/x86-i686--glibc--bleeding-edge-2018.11-1.tar.bz2"
BR2_TOOLCHAIN_EXTERNAL_GCC_8=y
BR2_TOOLCHAIN_EXTERNAL_HEADERS_4_14=y
BR2_TOOLCHAIN_EXTERNAL_CUSTOM_GLIBC=y
BR2_TOOLCHAIN_EXTERNAL_CXX=y
BR2_INIT_NONE=y
BR2_TARGET_SYSLINUX=y
BR2_TARGET_SYSLINUX_EFI=y
fails to build due to missing setjmp/longjmp definitions, which is a
consequence of a change introduced between gnu-efi 3.0.9 and 3.0.10.
This build failure is fixed by adding another syslinux paytch, which
has been submitted upstream.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Some ATF configurations, require a pre-built bare metal toolchain to
build some platforms which host cortex-m series core, for instance
rockchip rk3399 has a cortex-m0 core. Without a pre-built bare metal
toolchain, the build fails:
make[3]: arm-none-eabi-gcc: Command not found
To solve this, this commit implements a
BR2_TARGET_ARM_TRUSTED_FIRMWARE_NEEDS_ARM32_TOOLCHAIN
option. Platforms which have such requirement should enable this
config option.
Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When barebox, and thus barebox-aux, are downloaded from a git tree, then
barebox-aux download fails because a hash check is attempted on the
downloaded archive:
Could not fetch special ref 'v2020.03.0'; assuming it is not special.
ERROR: No hash found for barebox-aux-v2020.03.0.tar.gz
This is because we only exclude from the check the archive of the bare
barebox:
BR_NO_CHECK_HASH_FOR += $(BAREBOX_SOURCE)
However, the default name of an archive is based on the package name,
which for barebox-aux is not 'barebox'.
Since barebox-aux really uses the exact same source as the bare barebox,
it should also share the archive name.
This has two direct consequences and advantages:
- the hash check is completely avoided for the barebox-aux archive;
- the barebox-aux archive is not downloaded as it is already
downloaded for barebox.
Reported-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Tested-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
barebox and barebox-aux are really the same package, from the same URL
and the same version. They deserve being stored in the same directory.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Tested-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Some ATF configurations, such as the ones for the STM32MP1 processor
family, require DTC during the build as Device Tree files are
used. Without dtc, the build fails:
/bin/sh: 1: dtc: not found
dtc version too old (), you need at least version 1.4.4
plat/st/stm32mp1/platform.mk:239: recipe for target 'check_dtc_version' failed
make[1]: *** [check_dtc_version] Error 1
To solve this, this commit implements a
BR2_TARGET_ARM_TRUSTED_FIRMWARE_NEEDS_DTC option, in a way that mimics
the BR2_TARGET_UBOOT_NEEDS_DTC option we already have for the U-Boot
package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Tested with qemu_riscv32_virt_defconfig and
qemu_riscv64_virt_defconfig using Buildroot host-qemu 4.2.0.
Signed-off-by: Mark Corbin <mark@dibsco.co.uk>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add missing qstrip wrapping to the new
BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_TARGETS option.
Signed-off-by: Francois Gervais <fgervais@distech-controls.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We can only know the details of the license files for known versions. For
custom, older or newer versions, the license files may change, or may be
moved around.
So, do for optee-os as was done for other packages in the recent past,
and only define the list of license files for the latest version.
Reported-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We can only know the details of the license files for known versions. For
custom, older or newer versions, the license files may change, or may be
moved around.
So, do for at91bootstrap3 as was done for other packages in the recent
past, and only define the list of license files for the latest version.
Reported-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We can only know the details of the license files for known versions. For
custom, older or newer versions, the license files may change, or may be
moved around.
So, do for Barebox as was done for ATF, linux, and linux-headers, and
only define the list of license files for the latest version.
Add the hash for that license file, and align hashes to the new spacing
convention.
Reported-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We can only know the details of the license files for known versions. For
custom, older or newer versions, the license files may change, or may be
moved around.
So, do for U-Boot as was done for ATF, linux, and linux-headers, and only
define the list of license files for the latest version.
Reported-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Starting with 2020.01, uboot started using the 'undefine' make
directive, which was only introduced with make 4.0.
In the general case, we do not have a way to know if the uboot
selected by the user is older or later than 2020.01, so we have
no way to know before hand if make >= 4.0 is needed or not. As
such, we have no other option than to always require it.
So, use the existing $(BR2_MAKE_HOST_DEPENDENCY) and $(BR2_MAKE),
both of each will ensure that we do use a make that is at least 4.0.
Reported-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Allow specifying additional build targets for ATF.
This might be more useful when using a custom git repository.
For example, when using with the ATF repository from NXP QorIQ,
there is a new build target 'pbl' which is used to build the
pbl binary image. Note that in the specific case of the 'pbl'
target, additional build variables also need to be specified
through BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES.
Signed-off-by: Francois Gervais <fgervais@distech-controls.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The original UBOOT_FIXUP_LIBFDT_INCLUDE hook only works for u-boot versions
starting from v2017.11.
As older u-boot versions are still in common use today, e.g. in the
ci20_defconfig, extend the hook to cover a wider range of u-boot versions.
The main code change was proposed by Arnout Vandecappelle in [1].
Testing and comment changes were done by Thomas De Schampheleire.
Additional (build) testing done by Yann.
[1] http://lists.busybox.net/pipermail/buildroot/2019-May/251231.html
This was tested with the following defconfigs, that each excercise one
case:
----.-- No defconfig identified
2010.06 'lib/libfdt/', used to be simply 'libfdt' before upstream commit 0de71d507157...
2013.10 ci20_defconfig
2014.04 'srctree' used to be called 'SRCTREE' before upstream commit 01286329b27b27ea...
2017.05 olimex_a13_olinuxino_defconfig
2017.11 scripts/dtc/libfdt only exists since upstream commit c0e032e0090d6541549b19cc...
2018.01 mx6udoo_defconfig
2018.03 core change is equivalent to upstream commit e0d20dc1521e74b82dbd69be53a04884...
2019.10 nanopi_neo_defconfig
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
[yann.morin.1998@free.fr: add the build-test results]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add an upstream URL to the help text in Config.in. This
addresses the issue where an incorrect URL is displayed
on the package stats web page.
Signed-off-by: Mark Corbin <mark@dibsco.co.uk>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
