wlconf is build and installed as a host utility to be able to tweak
the wl18xx firmware configuration at build time.
Signed-off-by: Miken Valabdas <mvalabdas@distech-controls.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Switch to use uploaded zip archive instead of githubs provided tarball.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This WiFi/BT chip is used on ROCK Pi 4.
Signed-off-by: Tian Yuanhao <tianyuanhao@aliyun.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
While at it, adjust spacing in the hash file.
Signed-off-by: Tian Yuanhao <tianyuanhao@aliyun.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Brings a number of fixes and audio support. The aarch64 defconfig has
grown, so bump the ext4 size to make it fit.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Drop upstream patch which is included in the new version.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add patch from upstream that fixes build with Bison 3.7.
There are no autobuilder failures for this issue, but the following
defconfig:
BR2_arm=y
BR2_cortex_a8=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_INIT_NONE=y
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
BR2_SYSTEM_BIN_SH_NONE=y
BR2_PACKAGE_QT5=y
BR2_PACKAGE_QT5WEBENGINE=y
BR2_PACKAGE_RPI_USERLAND=y
Failed with:
/home/thomas/buildroot/buildroot/output/build/qt5webengine-5.15.0/src/core/release/gen/third_party/blink/renderer/core/xpath_grammar.cc:124:10: fatal error: xpath_grammar.hh: No such file or directory
124 | #include "xpath_grammar.hh"
| ^~~~~~~~~~~~~~~~~~
compilation terminated.
With this patch applied, it builds fine.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
[yann.morin.1998@free.fr: add url to upstream commit, provided by Peter]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
>From the release notes
See: https://github.com/redis/redis/blob/6.0.8/00-RELEASENOTES
================================================================================
Redis 6.0.7 Released Fri Aug 28 11:05:09 IDT 2020
================================================================================
Upgrade urgency MODERATE: several bugs with moderate impact are fixed,
Specifically the first two listed below which cause protocol errors for clients.
================================================================================
Redis 6.0.8 Released Wed Sep 09 23:34:17 IDT 2020
================================================================================
Upgrade urgency HIGH: Anyone who's using Redis 6.0.7 with Sentinel or
CONFIG REWRITE command is affected and should upgrade ASAP, see #7760.
Signed-off-by: Titouan Christophe <titouan.christophe@railnova.eu>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
JMESPath is a query language for JSON.
Signed-off-by: Raphaël Mélotte <raphael.melotte@essensium.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Jagan Teki <jagan@amarulasolutions.com> # roc-rk3399-pc
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Build will fail if gl is enabled without an api, a platform and a
window:
Message: No OpenGL Platforms found or requested
Message: No OpenGL Window systems found or requested
gst-libs/gst/gl/meson.build:948:2: ERROR: Problem encountered: GStreamer OpenGL integration required via options, but needed dependencies not found.
This requirement is already specified in Config.in through a simple
comment:
comment "The opengl library needs an API, a platform and a window system"
depends on !BR2_PACKAGE_GST1_PLUGINS_BASE_HAS_LIB_OPENGL
Fixes:
- http://autobuild.buildroot.org/results/d171059801adf8dea1a2116d7c729a2aa5767ac8
- http://autobuild.buildroot.org/results/b1bfa505bba534440d331c4948eea5eb2d165c97
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Alteras Jam STAPL Bytecode Player with 64-bit support.
This is a user-space port of the altera-stapl driver from the linux kernel.
The source released by Altera wasn't 64-bit compatible.
Additionally, the linux version is much cleaner and old cruft was removed.
Signed-off-by: Jochen Baltes <jochen.baltes@gmail.com>
Tested-by: Heiko Thiery <heiko.thiery@gmail.com>
[yann.morin.1998@free.fr: use the latest HEAD of the repository]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The asn1c is a free, open source compiler of ASN.1 specifications into C
source code.
Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com>
Reviewed-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Currently, the cross-compilation.conf installed in
$(HOST_DIR)/etc/meson/cross-compilation.conf for use by the SDK is
generated in a post-install-staging hook of the toolchain package.
With per-package directory support enabled, this means that the
generated cross-compilation.conf contains references to the
per-package directory of the toolchain/ package, which is not want we
want:
[binaries]
c = '/home/thomas/projets/buildroot/output/per-package/toolchain/host/bin/arm-linux-gcc'
cpp = '/home/thomas/projets/buildroot/output/per-package/toolchain/host/bin/arm-linux-g++'
ar = '/home/thomas/projets/buildroot/output/per-package/toolchain/host/bin/arm-linux-ar'
strip = '/home/thomas/projets/buildroot/output/per-package/toolchain/host/bin/arm-linux-strip'
pkgconfig = '/home/thomas/projets/buildroot/output/per-package/toolchain/host/usr/bin/pkg-config'
So instead, we generate this file in TOOLCHAIN_TARGET_FINALIZE_HOOKS,
so that the global paths are used:
[binaries]
c = '/home/thomas/projets/buildroot/output/host/bin/arm-linux-gcc'
cpp = '/home/thomas/projets/buildroot/output/host/bin/arm-linux-g++'
ar = '/home/thomas/projets/buildroot/output/host/bin/arm-linux-ar'
strip = '/home/thomas/projets/buildroot/output/host/bin/arm-linux-strip'
pkgconfig = '/home/thomas/projets/buildroot/output/host/usr/bin/pkg-config'
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add several upstream patches that are made to fix this CVE. Since there
is still no dated plan to release a new version add this bunch of
patches.
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Just like glibc, host-localedef needs python3 on the host to
build... since host-localedef is basically using the sources of glibc.
Fixes:
checking if /build/build/per-package/host-localedef/host/bin/ccache
/usr/bin/gcc is sufficient to build libc... yes
checking for x86_64-pc-linux-gnu-nm... /usr/bin/nm
checking for python3... no
checking for python... python
checking version of python... 2.7.18, bad
configure: error:
*** These critical programs are missing or too old: python
*** Check the INSTALL file for required versions.
As reported at:
http://lists.busybox.net/pipermail/buildroot/2020-September/291929.html
Signed-off-by: Michael Nosthoff <buildroot@heine.tech>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This is a bug-fix release, fixing a variety of small issues.
https://gitlab.com/muttmua/mutt/raw/stable/ChangeLog
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Major updates:
- AMD Zen1 core PMU updates
- AMD Zen2 core PMU support
- Intel Icelake core PMU support
- support to report if events are speculative
- support for Extended PEBS events on Icelake
- Intel Tremont core PMU support
- ARM Neoverse N1 core PMU support
- s390 event table updates
- Marvell TX2 core and uncore updates
- Intel CascadeLakeX uncore PMU support
- Various other event table updates and bug fixes
http://perfmon2.sourceforge.net/
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use --with-openssl=pkg-config otherwise sofia-sip will fail to retrieve
openssl dependencies resulting in the following build failure:
/srv/storage/autobuild/run/instance-3/output-1/host/opt/ext-toolchain/bin/../lib/gcc/arm-buildroot-linux-uclibcgnueabi/8.3.0/../../../../arm-buildroot-linux-uclibcgnueabi/bin/ld: ../libsofia-sip-ua/.libs/libsofia-sip-ua.a(tport_type_ws.o): in function `tport_ws_deinit_primary':
tport_type_ws.c:(.text+0x2c): undefined reference to `SSL_CTX_free'
/srv/storage/autobuild/run/instance-3/output-1/host/opt/ext-toolchain/bin/../lib/gcc/arm-buildroot-linux-uclibcgnueabi/8.3.0/../../../../arm-buildroot-linux-uclibcgnueabi/bin/ld: ../libsofia-sip-ua/.libs/libsofia-sip-ua.a(tport_type_ws.o): in function `tport_ws_init_primary_secure':
pkg-config option has been added to freeswitch sofia-sip since 2007 and
044ac9d8fa
Fixes:
- http://autobuild.buildroot.org/results/8a0c9dbad74a3b358f90c7a3b56b638c4bdb8045
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
libcap uses fork() since version 2.33 and
https://git.kernel.org/pub/scm/linux/kernel/git/morgan/libcap.git/commit/?id=ef485973d5547431782f9e5f4323eabfebb38622
So add MMU dependency to avoid the following build failure on
applications using libcap without MMU such as ntp:
/tmp/instance-0/output-1/host/opt/ext-toolchain/arm-buildroot-uclinux-uclibcgnueabi/bin/ld.real: /tmp/instance-0/output-1/host/bin/../arm-buildroot-uclinux-uclibcgnueabi/sysroot/usr/lib/libcap.a(cap_proc.o): in function `cap_launch':
/tmp/instance-0/output-1/build/libcap-2.42/libcap/cap_proc.c:912: undefined reference to `fork'
All packages that select BR2_PACKAGE_LIBCAP already have a BR2_USE_MMU
dependency, so none of them have to be changed.
Fixes:
- http://autobuild.buildroot.org/results/89f39dae01c07977062b909079bfcd45a68060d3
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Depending on its build configuration, openssl might not be compiled with
dynamic zlib support, and programs that link against openssl need to link
against zlib as well.
This can be generally and easily handled using the pkg-config files
installed by openssl.
Fixes: http://autobuild.buildroot.net/results/ae9/ae946ca72238840b3eaa5fe823e8d620618f7462/
Signed-off-by: Titouan Christophe <titouan.christophe@railnova.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Use tar.gz as SHA512SUMS does not contain the hash for tar.xz
- Fix CVE-2020-15900: A memory corruption issue was found in Artifex
Ghostscript 9.50 and 9.52. Use of a non-standard PostScript operator
can allow overriding of file access controls. The 'rsearch'
calculation for the 'post' size resulted in a size that was too large,
and could underflow to max uint32_t.
https://www.ghostscript.com/doc/9.53.0/News.htm
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
re2 unconditionally uses -pthread and add it to re2.pc
Moreover, it fails to buid without threads on:
In file included from /home/peko/autobuild/instance-0/output-1/per-package/re2/host/opt/ext-toolchain/arm-buildroot-linux-uclibcgnueabihf/include/c++/8.3.0/arm-buildroot-linux-uclibcgnueabihf/bits/os_defines.h:39,
from /home/peko/autobuild/instance-0/output-1/per-package/re2/host/opt/ext-toolchain/arm-buildroot-linux-uclibcgnueabihf/include/c++/8.3.0/arm-buildroot-linux-uclibcgnueabihf/bits/c++config.h:508,
from /home/peko/autobuild/instance-0/output-1/per-package/re2/host/opt/ext-toolchain/arm-buildroot-linux-uclibcgnueabihf/include/c++/8.3.0/bits/stl_algobase.h:59,
from /home/peko/autobuild/instance-0/output-1/per-package/re2/host/opt/ext-toolchain/arm-buildroot-linux-uclibcgnueabihf/include/c++/8.3.0/memory:62,
from /home/peko/autobuild/instance-0/output-1/build/re2-2020-08-01/re2/filtered_re2.h:24,
from /home/peko/autobuild/instance-0/output-1/build/re2-2020-08-01/re2/filtered_re2.cc:5:
/home/peko/autobuild/instance-0/output-1/per-package/re2/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/include/features.h:218:5: warning: #warning requested reentrant code, but thread support was disabled [-Wcpp]
# warning requested reentrant code, but thread support was disabled
^~~~~~~
In file included from /home/peko/autobuild/instance-0/output-1/build/re2-2020-08-01/re2/prog.h:22,
from /home/peko/autobuild/instance-0/output-1/build/re2-2020-08-01/re2/bitstate.cc:28:
/home/peko/autobuild/instance-0/output-1/build/re2-2020-08-01/re2/re2.h:768:16: error: 'once_flag' in namespace 'std' does not name a type
mutable std::once_flag rprog_once_;
^~~~~~~~~
/home/peko/autobuild/instance-0/output-1/build/re2-2020-08-01/re2/re2.h:768:11: note: 'std::once_flag' is defined in header '<mutex>'; did you forget to '#include <mutex>'?
/home/peko/autobuild/instance-0/output-1/build/re2-2020-08-01/re2/re2.h:218:1:
+#include <mutex>
Fixes:
- http://autobuild.buildroot.org/results/7d7c6dcac3cb8ea6deb753178e85eb1c5c74c8e3
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Michael Nosthoff <buildroot@heine.tech>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
