While reading the docs to find hooks, I completely missed the
LIBFOO_TARGET_FINALIZE_HOOKS one which was actually matching my
use-case.
Though it is documented in a subsection a few lines below, let's also
have it in the list of supported hooks so it's not hidden away.
Cc: Quentin Schulz <foss+buildroot@0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
With the change of the range of UIDs that is generated from the
automatic ID (-1), it became apparent that there is a potential problem
with these automatic IDs when upgrading: they may have changed, which
means that persistent files that exist outside of the rootfs suddenly
have a different owner.
Add a caveat section to the manual, as well as an explanation of how to
work around the problem.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[yann.morin.1998@free.fr: slight rewording]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Note that the flit-bootstrap SETUP_TYPE is deliberately not
documented as it is used only for bootstrapping the host pep517
toolchain and should not be used anywhere else.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
In the list of full distribution, the FAQ contains a link to Emdebian.
This project stopped receiving updates in 2014 and the main web page does not exist anymore.
This replace the entry with a link to the Debian ports page.
Signed-off-by: Yannick Brosseau <yannick.brosseau@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Sometimes new boards have not been tested with official docker so let's add
instructions to do it with utils/docker-run.
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Some packages have their rust sources as a sub-directory, rather
than at the root of the source tree.
Do like we do for autotools-package, and use the package's _SRCDIR
rather than the top-level directory $(@D).
Additionally, in such a situation, it is more than probable that
the Cargo.toml is also present in that sub-directory, so use that
when vendoring the package.
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When using uboot's legacy build system, the 'make uboot-menuconfig'
and 'make uboot-savedefconfig' targets are not available as they
are created by 'kconfig-package'.
Signed-off-by: Simon Doppler <dopsi@dopsi.ch>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Links were aimed at the methods.co.nz domain, which is now returning
404s. The current situation of AsciiDoc is unclear to me: the Fedora
package points to this website, they own asciidoc.org, Wikipedia points
to this project as well but their Git repo's README includes the
following paragraph:
> AsciiDoc.py is a legacy processor for this syntax, handling an older
> rendition of AsciiDoc. As such, this will not properly handle the
> current AsciiDoc specification. It is suggested that unless you
> specifically require the AsciiDoc.py toolchain, you should find a
> processor that handles the modern AsciiDoc syntax.
https://github.com/asciidoc-py/asciidoc-py/blob/10.1.3/README.md
"AsciiDoc specification" pointing towards:
https://projects.eclipse.org/projects/asciidoc.asciidoc-lang
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Remove override of FOO_{CONF_OPTS,DEPENDENCIES} in conditional
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The doc-asciidoc infra allows document to define sources and resources,
and those can only be local (there is no download support for documents).
The currently documented way to specify those is to use the $(pkgdir)
macro to point to the document sources and resources when they are along
the .mk.
However, this works only for sources and not for resources.
Indeed, sources are used to generate Makefile dependency rules, so
$(pkgdir) is expanded and evaluated during the call to $(doc-asciidoc),
while resources are expanded and evaluated when the rules are executed,
which always happen after all the parsing has be done, at which point
$(pkgdir) expands to the last Makefile that was parsed, which is always
Buildroot's own manual.
This went unnoticed so far because Buildroot's manual is 1) the last to
be parsed, and 2) not using $(pkgdir) anyway.
Additionally, $(pkgdir) is mostly an internal macro, that is, as this
change demonstrates, difficult to use, and thus should not be used, in
packages or in documents.
We fix that by introducing $(FOO_DOCDIR), similar to $(FOO_PKGDIR),
which points to the document directory. We choose not to name the
variable FOO_PKGDIR, because it semantically is not a package.
As a consequence, the last argument to the doc-asciidoc macro is now
superfluous, so it is removed, which causes a little bit of churn in
the main macro. As a further consequence, the third argument in the
inner macro is no longer needed either, so it too is removed, which
causes a bit more churn yet in the inner macro.
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Cc: Frederic GARDES <frederic.gardes@orange.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Some software decides based on uid/gid whether a user is a system or
normal (human) user, with different behaviour for those flavors (example
journald [2]).
So adding logic to create system-users is necessary, we take the now
common ranges from [1].
This extends the mkusers script to allow -2 for uid/gid, this argument
will take an identifier from the user range. All identifiers used up to
now should have been from the system range, so -1 is now interpreted as
a system user/group.
Note that after this commit, all the UIDs and GIDs that are created
automatically (with -1) will change. That means if there is peristent
data on an existing system that was created by such an automatic user,
it will suddenly belong to a different user. However, this could already
happen before: if a USERS line is added to a package, then other UIDs
may change as well.
Add system/user ranges as variables, and the argument for user/system
uid variable as well. Thus some magic constants could be removed, some
further occurences of -1 were replaced with equivalent logic. For
consistency, the existing MIN/MAX_UID/GID variables are renamed to
FIRST/LAST_USER_UID/GID.
Update the documentation with the new automatic ranges.
[1] - https://systemd.io/UIDS-GIDS/
[2] - https://www.freedesktop.org/software/systemd/man/journald.conf.html
Signed-off-by: Norbert Lange <nolange79@gmail.com>
[Arnout: use -1 for system users; refactor the changes a bit]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
From [1]:
"Even though the ordering has absolutely no consequences in Kconfig, it
is not logical (when reading). It is more logical and far easier to
understand when depends come first, followed by the selects."
Also, the Config.in example in the manual suggests to use this coding
style [2]."
Use the correct coding style in the chapter "Choosing depends on or select"
in the manual.
[1] http://lists.busybox.net/pipermail/buildroot/2015-October/142955.html
[2] https://nightly.buildroot.org/manual.html#_coding_style
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 1ba85b7f87 (support/download: add explicit no-hash support)
introduced the 'none' hash type, in an attempt to make hash files
mandatory, but not failing on archives localy generated, like those
for git or svn repositories, especially for those packages where a
version choice was present, which would allow for either remote
archives for which we'd have a hash or VCS trees for which we could
not have a hash for the localy generated archive.
Indeed, back in the time, we did not have a mean to generate
reproducible archives, so having a hash file without a hash for
thosel ocally generated archives would trigger an error in the
hash-checking machinery.
But now, low-and-behold, we do know how to generate those archives,
and we have a mechanism to explicitly exclude some archives from being
hash-checked (e.g. when the version string itself can be user-provided).
As such, the 'none' hash type no longer has any raison d'être, we do not
use it in-tree, and its use in a br2-external tree is most probably
inexistent (as is the use of hash files alotgether most probably).
So we simply drop the support for that.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
[Thomas: drop support in checkpackagelib, as reported by Ricardo.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The Buildroot manual was already providing some details on how to
integrate Cargo packages, and those details now need to be updated
with a proper documentation for the cargo-package infrastructure, as
well as updates related to vendoring support, which affects how
dependencies are handled.
In addition, now that we have vendoring support for Cargo packages,
let's rewrite the dependency management section in a more accurate
way.
We drop the part about the local cache of the registry, because
+CARGO_HOME+ in Buildroot points to $(HOST_DIR)/share/cargo, which is
not shared between builds nor preserved accross builds, so its effect
as a cache is limited.
Signed-off-by: Patrick Havelange <patrick.havelange@essensium.com>
[Thomas: numerous updates and extensions.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This package provides Mali libraries for Sunxi Mali Utgard GPUs. The
trailing -mainline is historical and was used at a time when there was
two packages providing these libraries. The "non-upstream" package has
been removed some time ago so before adding new packages bringing
support for other ARM Mali GPU versions or implementations, rename
sunxi-mali-mainline into sunxi-mali-utgard.
Add a legacy entry.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
[Giulio: rebase on master. Rename SUNXI_MALI_MAINLINE_REV to
SUNXI_MALI_UTGARD_REV in sunxi-mali-mailine-driver.mk and
BR2_PACKAGE_SUNXI_MALI_MAINLINE to BR2_PACKAGE_SUNXI_UTGARD in
sunxi-mali-mainline-driver/Config.in to respect bisectability]
Tested-by: Luca Ceresoli <luca@lucaceresoli.net>
[Build tested only]
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
[Arnout: also update existing select in Config.in.legacy]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Git Large File Storage replaces large files with text pointers in the
Git repository while storing the contents on a remote server. If a
repository is using this extension, then git-lfs must be used to
checkout the large files before the source archive is generated.
Signed-off-by: John Keeping <john@metanate.com>
[vfazio:
- add git-lfs to DL_TOOLS_DEPENDENCIES
- fixup for 5a0d681394
("infra/pkg-download: make the DOWNLOAD macro fully parameterised")
]
Signed-off-by: Vincent Fazio <vfazio@xes-inc.com>
[Arnout:
- don't "git lfs install";
- recurse into submodules.
]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add Secure File Transfer Program (SFTP) support using a simple wrapper.
SFTP is a common protocol used to transfer files securely between
enterprises, but it is not currently supported in Buildroot because all
of the packages are usually available via HTTP, git or some other
download method.
SFTP is similar to FTP but it preforms all operations over an encrypted
SSH transport using a specific protocol. This is unlike ftps, which is
traditional FTP over an SSL/TLS connection.
Signed-off-by: Thomas Preston <thomas.preston@codethink.co.uk>
Signed-off-by: Michael Drake <michael.drake@codethink.co.uk>
[Arnout:
- update documentation with sftp everywhere scp is mentioned;
- rename "verbose" variable to "quiet";
- print the sftp command, similar to wget and scp helpers.
]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Use single space in LIBFOO_{DEVICES,PERMISSIONS} to be consistent with
LIBFOO_USERS, package/makedevs/README and most examples/packages
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
