The defconfig choice is the default one, so it is redundant and can be
removed without effect.
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 6b2329bb80 ("configs/ti_am64x_sk: new defconfig") forgot to
specify the Linux kernel version, so do that now.
When the defconfig was added, the default version was 6.4.x, so use
version 6.4.16.
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The defconfig choice is the default one, so it is redundant and can be
removed without effect.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Commit 4b8fddb060 ("configs/ti_am62x_sk: new defconfig) forgot to
specify the Linux kernel version, so do that now.
When the defconfig was added, the default version was 6.4.x, so use
version 6.4.16.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
[Romain:
use BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_4 as suggested
by Giulio Benetti]
Signed-off-by: Romain Naour <romain.naour@smile.fr>
uImage is almost deprecated so let's switch to zImage. Let's also bump
Linux version to 6.1.44, U-Boot to 2023.07 and remove
BR2_TARGET_UBOOT_NEEDS_PYTHON3 since it's selected by
BR2_TARGET_UBOOT_NEEDS_PYLIBFDT.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The custom kernel used for the Rock5B features an FIQ debug
interface which is enabled by default. As it is not needed, it is
disabled. The documentation features instructions on how to
re-enable it, if it is needed.
Signed-off-by: Kilian Zinnecker <kilian.zinnecker@mail.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The assumption is that updates to the stable branch should not break anything,
so we use the latest LTS rather than a specific version.
Signed-off-by: Marleen Vos <marleen.vos@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The assumption is that updates to the stable branch should not break anything,
so we use the latest LTS rather than a specific version.
Signed-off-by: Marleen Vos <marleen.vos@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- v2.6 changes to FIP instead of SSBL boot.
- This requires switching to u-boot.bin in U-Boot, and using that
instead of .stm32 in ATF.
- fiptool expects dtb to be split off from u-boot.bin, so need custom
u-boot-nodtb.bin in addition to u-boot.dtb.
Caveat: this is perhaps not really obligatory, but the ATF
documentation explains it like that.
- The partition must be named fip (while it must be named ssbl for
SSBL boot).
- Since the partition name is set in the common template, all
defconfigs using that template must be bumped in a single commit
- ATF now produces both fip.bin and <boardname>.stm32, so fip.bin has
been added to the configs
- While we're at it, add the structuring comments to
avenger96_defconfig similar like the other defconfigs
Signed-off-by: Marleen Vos <marleen.vos@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump qemu_arm_ebbr_defconfig and qemu_aarch64_ebbr_defconfig in sync:
- Bump Linux to v6.6.11
- Bump U-Boot to 2024.01
- Bump TF-A to v2.10
While at it, adapt Qemu command line arguments to avoid a warning when
disabling ACPI.
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Cc: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 78e8f383 "configs/imx8mmpico: bump bsp components to version
tn-kirkstone_5.15.71-2.2.0" bumped components, but forgot to add
BR2_TARGET_UBOOT_NEEDS_OPENSSL=y.
This commit adds it to the defconfig to fix the build.
Fixes:
- https://gitlab.com/buildroot.org/buildroot/-/jobs/5858180248
In file included from tools/imagetool.h:24,
from tools/aisimage.c:7:
include/image.h:1166:12: fatal error: openssl/evp.h: No such file or directory
1166 | # include <openssl/evp.h>
| ^~~~~~~~~~~~~~~
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Also adjust the include path for the device tree. Since Linux 6.5-rc1
(724ba67515 "ARM: dts: Move .dts files to vendor sub-directories"),
sama5d31.dtsi lives in the microchip subdirectory.
Signed-off-by: Edgar Bonet <bonet@grenoble.cnrs.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Select BR2_TARGET_UBOOT_NEEDS_OPENSSL to fix the following build
error:
include/image.h:1394:12: fatal error: openssl/evp.h: No such file or directory
1394 | # include <openssl/evp.h>
Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/5858180070
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Tested-By: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Bump version of Linux to 6.6.14 and U-Boot to 2024.01
and also use upstream configs and dts.
Signed-off-by: Ludwig Kormann <ludwig.kormann@ict42.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Even though Northstart platform support is well upstreamed it may always
happen that some kernel change affects/breaks something. It's a good
practice to specify fixed versions for kernel & Linux headers.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
There is now support in both upstream U-Boot and upstream Linux.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Tested-by: Sergey Kuzminov <kuzminov.sergey81@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
imxrt1050-evk was using uImage switch to using zImage
now.
Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump Linux to 6.7 and U-Boot to 2024.01
Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Those components are aligned with NXP BSP lf-5.15.71-2.2.0.
This commit introduces arm-trusted-firmware upstream patches to
compile the needed version with newer gcc and binutils.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/5083366622
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Starting with kernel release v6.5 ARM DTS files are placed in vendor
subdirectories (Linux commit 724ba6751532 ("ARM: dts: Move .dts files to
vendor sub-directories")).
This fixes:
make[3]: *** No rule to make target 'arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dtb'. Stop.
make[2]: *** [Makefile:1384: bcm4708-smartrg-sr400ac.dtb] Error 2
make[3]: *** No rule to make target 'arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dtb'. Stop.
make[2]: *** [Makefile:1384: bcm47094-luxul-xwr-3150-v1.dtb] Error 2
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This defconfig enables edk2 UEFI shell and grub2 riscv64-efi boot
of a Linux Kernel.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Those components are aligned with NXP BSP lf-5.15.71-2.2.0.
This commit introduces arm-trusted-firmware upstream patches to
compile the needed version with newer gcc and binutils.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/5083366606
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The linux defconfig 'bb.org_defconfig' is the best for beagleboard.
To load compressed kernel modules, kmod and xz packages are needed
because busybox doesn't support it.
Bump U-Boot to version 2023.10. The uboot-tools package is no need.
Tested on beaglebone black.
[1] https://github.com/beagleboard/linux/releases/tag/6.1.46-ti-r13
Signed-off-by: Scott Fan <fancp2007@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit d344ffe624 (configs/rock5b: add hash for custom uboot)
explicitly noted that the kernel was retrieved from a git-clone, so the
sha1 of the commit was enough to get what we expect.
However, that does not account for the fact that the upstream repository
can disapear or be temporarily unavailable (maliciously or not). In that
case, the kernel archive will be looked up on the backup mirror.
In that case, the download is via wget over https, which protects the
transport, but does not guarantee that the remote server serves the
expected archive.
The hash file was dropped when d344ffe624 was applied; restore it.
Since the defconfig now has hashes for all its downloads, enforce
checking hashes.
Signed-off-by: Kilian Zinnecker <kilian.zinnecker@mail.de>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This patch adds support for Xilinx Kria KD240 starter kit.
KD240 features can be found here:
https://www.xilinx.com/products/som/kria/kd240-drives-starter-kit.html
While the Kria SOM is based on a ZynqMP SoC, there are some key
boot config differences from the other ZynqMP evaluation boards.
1. There are no boot switches on Kria SOMs. The boot mode is thus
hard configured for QSPI flash. A pre-programmed boot.bin comes
with every Starter Kit. U-Boot can then find the Linux kernel and
file system on the SD card.
Optional instructions for updating the boot.bin in the QSPI flash
can be found in the readme.txt file and the link below.
https://xilinx-wiki.atlassian.net/wiki/spaces/A/pages/1641152513/Kria+K26+SOM
2. Kria SOMs use UART1 for the console instead of UART0. For this
reason, Kria Starter Kits will use a separate extlinux.conf file
from other ZynqMP evaluation boards.
3. The KD240 has a USB to SD card bridge, so the Linux kernel
and file system are found on /dev/sda1 and /dev/sda2.
4. The following patches have been submitted upstream to u-boot.
Without these patches, the usb, sd card and ethernet peripherals
do not work correctly.
https://patchwork.ozlabs.org/project/uboot/patch/20231213134007.2818069-1-neal.frager@amd.com/https://patchwork.ozlabs.org/project/uboot/patch/20231213134052.2818879-1-neal.frager@amd.com/
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
[Peter: add upstream tag, drop patch numbering from patches]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch adds support for ZynqMP ZCU104 evaluation board.
ZCU104 features can be found here:
https://www.xilinx.com/products/boards-and-kits/zcu104.html
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Let's also enable NXP firmware package to let latest SDMA firmware to be
loaded. To achieve this we also need to enable dynamic eudev to let it to
load the firmware as it is requested early before the rootfs is mounted.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
[Peter: explain why eudev is needed]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Let's also enable NXP firmware package to let latest SDMA firmware to be
loaded. To achieve this we also need to enable dynamic eudev to let it
load the firmware as it is requested early before the rootfs is mounted.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
[Peter: explain why eudev is needed]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The zynq_qmtech_defconfig has not been maintained for 3 years, and is now
using a very out of date u-boot and Linux kernel. Since there are 4 other
zynq7000 defconfigs available in buildroot and Julien no longer has a
functional board, drop the defconfig.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Acked-by: Julien Olivain <ju.o@free.fr>
[Peter: reword commit message]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch bumps the versal_vck190_defconfig to xilinx-v2023.2 which includes
the following updates:
- Linux v6.1.30 with additional bug fixes
- U-Boot v2023.01 with additional bug fixes
- ATF v2.8 with additional bug fixes
- PLM xilinx_v2023.2
- PSMFW xilinx_v2023.2
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch bumps the zynqmp_kria_kv260_defconfig to xilinx-v2023.2 which includes
the following updates:
- Linux v6.1.30 with additional bug fixes
- U-Boot v2023.01 with additional bug fixes
- ATF v2.8 with additional bug fixes
- PMUFW xilinx_v2023.2
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch bumps the zynqmp_zcu106_defconfig to xilinx-v2023.2 which includes
the following updates:
- Linux v6.1.30 with additional bug fixes
- U-Boot v2023.01 with additional bug fixes
- ATF v2.8 with additional bug fixes
- PMUFW xilinx_v2023.2
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch bumps the zynqmp_zcu102_defconfig to xilinx-v2023.2 which includes
the following updates:
- Linux v6.1.30 with additional bug fixes
- U-Boot v2023.01 with additional bug fixes
- ATF v2.8 with additional bug fixes
- PMUFW xilinx_v2023.2
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch adds support for Xilinx Kria KR260 starter kit.
KR260 features can be found here:
https://www.xilinx.com/products/som/kria/kr260-robotics-starter-kit.html
While the Kria SOM is based on a ZynqMP SoC, there are some key
boot config differences from the other ZynqMP evaluation boards.
1. There are no boot switches on Kria SOMs. The boot mode is thus
hard configured for QSPI flash. A pre-programmed boot.bin comes
with every Starter Kit. U-Boot can then find the Linux kernel and
file system on the SD card.
Optional instructions for updating the boot.bin in the QSPI flash
can be found in the readme.txt file and the link below.
https://xilinx-wiki.atlassian.net/wiki/spaces/A/pages/1641152513/Kria+K26+SOM
2. Kria SOMs use UART1 for the console instead of UART0. For this
reason, Kria Starter Kits will use a separate extlinux.conf file
from other ZynqMP evaluation boards.
3. The KR260 has a USB to SD card bridge, so the Linux kernel
and file system are found on /dev/sda1 and /dev/sda2.
Signed-off-by: Neal Frager <neal.frager@amd.com>
[Peter: fix kr260.sh shellcheck warnings, similar to kv260.sh]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Switch to the new Linux LTS release 6.6.3. Switch to the latest
U-Boot 2023.10 and ATF 2.9. Increase ext2 partition size to fit
new versions.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Switch to the new Linux LTS release 6.6.3. Switch to the
latest U-Boot 2023.10.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Switch to the new Linux LTS release 6.6.3. Switch to the
latest U-Boot 2023.10.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Switch to the new Linux LTS release 6.6.3. Switch to the
latest U-Boot 2023.10.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Switch to the new Linux LTS release 6.6.3. Switch to the
latest U-Boot 2023.10.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The defconfig fetches Linux and U-Boot from a git repo using the
unauthenticated git:// protocol, so add download hashes for them to ensure
we get the right sources by adding a global patch dir and running
utils/add-custom-hashes.
The defconfig uses the Linux sources for the kernel headers, so make
linux-headers/linux-headers.hash a symlink to linux/linux.hash so the same
hash file is used.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Linux 6.1 has been marked LTS for a long time now. Time to bump
Linux for RaspberryPi's to the latest 6.1.61 Since April 2022
the RaspberryPi defconfigs have compressed kernel module enabled
by default. (see [1] and [2]).
To load compressed kernel modules kmod and xz packages are needed
because busybox doesn't support it.
For testing I used RaspberryPi 2, 3(32+64bit) and 4(32+64bit), all with mdev enabled.
[1] c45b4223a4
[2] https://github.com/raspberrypi/linux/issues/4966
Signed-off-by: Bram Oosterhuis <dev@bybram.com>
Reviewed-by: Marcus Hoffmann <marcus.hoffmann@othermo.de>
Tested-by: Marcus Hoffmann <marcus.hoffmann@othermo.de>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
U-Boot requires pylibfdt, pyelftools and openssl so let's enable U-Boot
corresponding BR2_TARGET_UBOOT_NEEDS_*.
Rootfs is not big enough because of Linux modules size so let's extend it
to 120MB.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/5551322041
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
