For the newer versions the collectd configure script expects
libgcrypt-config as parameter rather than the location for the
libgcrypt-config script. Adjust the package to account for this.
Fixes:
http://autobuild.buildroot.net/results/a49/a494bc905e4509528c4932f76a094b9ea8e70bd3/
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
--with-libnetsnmp doesn't take a path to the netsnmp config script,
but to the sysroot where netsnmp can be found.
Fixes:
http://autobuild.buildroot.org/results/358e2f02f42e08fe362ecd46e636c0048e77c21f/
Signed-off-by: Jack Kao <jackzzjack@gmail.com>
[Thomas: path is $(STAGING_DIR)/usr, not $(STAGING_DIR)/usr/include.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add explicit support for the write_prometheus plugin, it requires the
libmicrohttpd and protobuf-c libraries.
[Peter: add note about where dependencies come from]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add explicit support for the gps plugin that uses libgps from the gpsd
package.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It requires the libpqos library which buildroot doesn't provide yet.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It requires the libdpdk library which buildroot doesn't provide yet.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add explicit support for the new hugepages dependency-less plugin.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It requires the libgrpc++ library which buildroot doesn't provide yet.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add explicit support for the mqtt (mosquitto) plugin.
Place it under the write category even though it can read as well, since
it will normally be used to write (publish) rather than read
(subscribe).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add explicit support for the new cpusleep dependency-less plugin.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add explicit support for the new chrony dependency-less plugin.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It requires the libxenctrl library which buildroot doesn't provide yet.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It's intended for solaris so no usage case for buildroot.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It's a no-op since it's disabled/enabled by the config knob.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add explicit support for the new notify_nagios dependency-less plugin.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes a heap overflow in the network plugin.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Keep the existing sub-menus, because there are a lot of entries in those
sub-menus. Using comments to separate them is not a totally satifactory
solution.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The service file was taken from Debian.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For version 5.5.x a reorganization was made and some common funtionality
was moved to libraries, however proper dependency accounting isn't
handled in the Makefile thus causing build breakage on some parallel
builds. Fixes:
http://autobuild.buildroot.net/results/a5e/a5e6891e9ea66ac8216d3302da3702770ef7247b/
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that IPv6 is mandatory remove package dependencies and conditionals
for it.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Explicitly link against -lpthread and -lm.
Fixes ([1]):
checking for PQconnectdb in -lpq... no
checking for PQserverVersion in -lpq... no
postgresql . . . . . no (dependency error)
[1] http://autobuild.buildroot.org/results/926/926a43b8f635790d7e9abdc977ea803ddaf8a523/
[Thomas:
- Rebase on top of master
- Use += instead of =, which will avoid mistakes in the future.]
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that largefile is mandatory removes package dependencies and
conditionals.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit doesn't touch infra packages.
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes [1] in case postgresql-devel package is installed on the host:
libpq . . . . . . . . no (libpq-fe.h not found)
postgresql . . . . . no (dependency error)
configure: error: "Some plugins are missing dependencies - see the summary above for details"
Otherwise fixes the following configure warning:
configure: WARNING: pg_config returned with status 127
[1] http://autobuild.buildroot.net/results/336/336b3e932be245faa04969af960702af672916dc
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In case the libgcrypt development files are present on the host system,
collectd's ./configure will mistakenly try to use them and will call the
host system's libgcrypt-config, thus leading it to use path to the host
system includes and libraries.
Fix that in two ways:
- explicitly disable libgcrypt support when libgcrypt is not enabled;
- pass the complete path to libgcrypt-config when libgcrypt is enabled.
However, collectd's configure.ac is utterly broken. The code in
configure.ac has special code to check for libgcrypt-config, and use
whatever is provided via --with-libgcrypt=/path/to/libgcrypt-config. But
that is promptly forgotten because they then call the AM_PATH_LIBGCRYPT
macro, that just does it all again from scratch, and does not use the
value previously found.
Instead, we set LIBGCRYPT_CONFIG in the environment and point it to our
own libgcrypt-config.
Should fix numerous build issues:
http://autobuild.buildroot.net/results/ad4/ad408aef5fb92fe9e031c7dbaf6999776b40ace4/http://autobuild.buildroot.net/results/967/96735bfa91bcf2e3dff89f69c0a12ed406e9efb9/
...
http://autobuild.buildroot.net/results/3bd/3bdd9bdffb1d55414787d38fc2656d7a3391a957/
...
(the first two are with the paranoid wrapper, the third one was before
the paranoid wrapper.)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Romain Naour <romain.naour@openwide.fr>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since a while, the semantic of BR2_PREFER_STATIC_LIB has been changed
from "prefer static libraries when possible" to "use only static
libraries". The former semantic didn't make much sense, since the user
had absolutely no control/idea of which package would use static
libraries, and which packages would not. Therefore, for quite some
time, we have been starting to enforce that BR2_PREFER_STATIC_LIB
should really build everything with static libraries.
As a consequence, this patch renames BR2_PREFER_STATIC_LIB to
BR2_STATIC_LIBS, and adjust the Config.in option accordingly.
This also helps preparing the addition of other options to select
shared, shared+static or just static.
Note that we have verified that this commit can be reproduced by
simply doing a global rename of BR2_PREFER_STATIC_LIB to
BR2_STATIC_LIBS plus adding BR2_PREFER_STATIC_LIB to Config.in.legacy.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Remove --localstatedir=/var from all autotools packages where it is no longer
needed.
Also remove --localstatedir=/var/lib/dhcp from package dhcp. localstatedir is
used by dhcp to set the default directory for the leases files. This can also
be done by setting --with-*-lease-file=/var/lib/dhcp/*, which is done in
dhcp.mk.
A custom --localstatedir is left in:
* proftpd.mk
* mysql.mk
This is safe to do:
One of the good thing with autoconf is that if you pass:
--localstatedir=/var ... --localstatedir=/var/something
Then /var/something will be used. So, we can set --localstatedir=/var
by default in the infrastructure, and still have certain packages doing
weird things override it. [Thanks to Thomas Petazzoni]
Signed-off-by: Jörg Krause <jkrause@posteo.de>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To be consistent with the recent change of FOO_MAKE_OPT into FOO_MAKE_OPTS,
make the same change for FOO_CONF_OPT.
Sed command used:
find * -type f | xargs sed -i 's#_CONF_OPT\>#&S#g'
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that we've got a libmemcached package we can add support for the
memcachec plugin.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
collectd doesn't really support static-only builds: each plugin
defines a module_register() function, and plugins are supposed to be
dynamically loaded.
Also, passing -lm in LIBS makes more sense than LDFLAGS, as it is
passed at the end of the build command line.
Fixes:
http://autobuild.buildroot.org/results/047/047dc20aba46885679b6d21cdd2d77fc252374b6/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The host-protobuf package can only build on certain architectures. For
example, host-protobuf does not build on PowerPC platforms, causing
build failures on the autobuilders. Since we don't really care about
build platforms other than x86 and x86-64, this commit restricts the
build of host-protobuf to these architectures only, even though if
technically it could build on ARM and MIPS.
Fixes:
http://autobuild.buildroot.org/results/9b9/9b9b20b0e4694b11425cdc2382650cdc2774e400/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
