Whenever possible, we want to use the "shortcuts" provided by genimage
for the partition-type-uuid values:
- U for the EFI System Partition
- F for FAT32 partitions
- L for root filesystem partitions and other Linux filesystems
In follow-up commits, we will convert existing genimage.cfg to this
convention, except for the root filesystem, if the existing
genimage.cfg specifies a partition-type-uuid that doesn't match the
one that "L" would imply. In this case, we will keep things as-is to
not break existing setups. However, for all future genimage.cfg files,
we recommend to use "L" for the root filesystem.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Links were aimed at the methods.co.nz domain, which is now returning
404s. The current situation of AsciiDoc is unclear to me: the Fedora
package points to this website, they own asciidoc.org, Wikipedia points
to this project as well but their Git repo's README includes the
following paragraph:
> AsciiDoc.py is a legacy processor for this syntax, handling an older
> rendition of AsciiDoc. As such, this will not properly handle the
> current AsciiDoc specification. It is suggested that unless you
> specifically require the AsciiDoc.py toolchain, you should find a
> processor that handles the modern AsciiDoc syntax.
https://github.com/asciidoc-py/asciidoc-py/blob/10.1.3/README.md
"AsciiDoc specification" pointing towards:
https://projects.eclipse.org/projects/asciidoc.asciidoc-lang
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add allowed notations section for genimage.cfg files by specifying the
accepted suffix or prefix. Note that "K" has been decided to specify
KiloBytes as 1024 bytes. This has been done because in Buildroot the 90%
of the cases were using "K" and not "k".
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds the explanation for the genimage.cfg files coding standard.
A real standard is not defined upstream by the genimage utility
developers[1], but I try to give one here in Buildroot for consistency.
[1]: https://github.com/pengutronix/genimage
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix a few punctuation mistakes. The removed link is redundant, see the
previous sentence.
Signed-off-by: Merlin Büge <merlin.buege@tuhh.de>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
After some discussion, we found out that "tools" has the four first
letters identical to the "toolchain" subfolder, which makes it a bit
unpractical with tab-completion. So, this commit renames "tools" to
"utils", which is more tab-completion-friendly.
This has been discussed with Arnout and Yann.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add brmake, a small script that redirects the build output log to a
file, keeping just Buildroot's own messages, with the date+time added
at the start of the line.
We need to unbuffer the output of make so that, when the script is
interrupted (SIGINT, ^C), there is no lingering output not yet digested
by the logger loop.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The advantages of using a pre-existing coding style instead of creating
our own are:
- documenting on the manual takes a single sentence;
- there are automatic tools to help during development/review.
So document that PEP8 recommendation should be followed.
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Samuel Martin <s.martin49@gmail.com>
Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Explicitly state that one tab counts for 8 columns in package
description, leaving 62 characters to the text itself.
Update the text and the example in the two places where the Config.in
format is described.
Also mention a newline is expected between the help text itself and the
upstream URL.
This blob can help developers to understand the expected formatting.
Also, it can be referenced by reviewers.
http://patchwork.ozlabs.org/patch/611289/http://patchwork.ozlabs.org/patch/606866/http://patchwork.ozlabs.org/patch/459960/
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
While describing a package I though that the tab and 2 spaces was
already doing the margin for wrapping the help test (ie 70 char when
wrapping to 80) but apparently the full text need to fit 72 columns.
So this patch propose to document that fact in the two places where
the Config.in format is described.
Signed-off-by: Julien Viard de Galbert <julien@vdg.name>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To be consistent with the recent change of FOO_MAKE_OPT into FOO_MAKE_OPTS,
make the same change for FOO_CONF_OPT.
Sed command used:
find * -type f | xargs sed -i 's#_CONF_OPT\>#&S#g'
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Asciidoc supports two syntaxes for section titles: two-line titles (title
plus underline consisting of a particular symbol), and one-line titles
(title prefixed with a specific number of = signs).
The two-line title underlines are:
Level 0 (top level): ======================
Level 1: ----------------------
Level 2: ~~~~~~~~~~~~~~~~~~~~~~
Level 3: ^^^^^^^^^^^^^^^^^^^^^^
Level 4 (bottom level): ++++++++++++++++++++++
and the one-line title prefixes:
= Document Title (level 0) =
== Section title (level 1) ==
=== Section title (level 2) ===
==== Section title (level 3) ====
===== Section title (level 4) =====
The buildroot manual is currenly using the two-line titles, but this has
multiple disadvantages:
- asciidoc also uses some of the underline symbols for other purposes (like
preformatted code, example blocks, ...), which makes it difficult to do
mass replacements, such as a planned follow-up patch that needs to move
all sections one level down.
- it is difficult to remember which level a given underline symbol (=-~^+)
corresponds to, while counting = signs is easy.
This patch changes all two-level titles to one-level titles in the manual.
The bulk of the change was done with the following Python script, except for
the level 1 titles (-----) as these underlines are also used for literal
code blocks.
This patch only changes the titles, no other changes. In
adding-packages-directory.txt, I did add missing newlines between some
titles and their content.
----------------------------------------------------------------------------
#!/usr/bin/env python
import sys
import mmap
import re
for input in sys.argv[1:]:
f = open(input, 'r+')
f.flush()
s = mmap.mmap(f.fileno(), 0)
# Level 0 (top level): ====================== =
# Level 1: ---------------------- ==
# Level 2: ~~~~~~~~~~~~~~~~~~~~~~ ===
# Level 3: ^^^^^^^^^^^^^^^^^^^^^^ ====
# Level 4 (bottom level): ++++++++++++++++++++++ =====
def replace_title(s, symbol, replacement):
pattern = re.compile(r'(.+\n)\%s{2,}\n' % symbol, re.MULTILINE)
return pattern.sub(r'%s \1' % replacement, s)
new = s
new = replace_title(new, '=', '=')
new = replace_title(new, '+', '=====')
new = replace_title(new, '^', '====')
new = replace_title(new, '~', '===')
#new = replace_title(new, '-', '==')
s.seek(0)
s.write(new)
s.resize(s.tell())
s.close()
f.close()
----------------------------------------------------------------------------
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It is not buildroot convention to align the = signs in .mk files, so this
shouldn't be suggested in the manual.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Various consistency and correctness improvements.
Also removing some sentences that are not or no longer relevant.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Minor grammatical and spelling tweaks to the manual content.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
