The static devices defined by packages are currently added to the full
device table when two conditions are met:
(1) ROOTFS_DEVICE_TABLES is non-empty
(2) BR2_ROOTFS_DEVICE_CREATION_STATIC=y
(2) is obviously correct. However, depending on (1) is not correct: if
the user doesn't provide any custom permission table and custom device
table, then ROOTFS_DEVICE_TABLES will be empty.
So instead, move the addition of the package-defined static devices
outside of condition (1), and have it only under condition (2).
Reported-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
In commit 6b50f988ad ("fs/common.mk:
rename internal variable"), USERS_TABLE was renamed to
ROOTFS_FULL_USERS_TABLE.
This commit follows the same direction by renaming the
FULL_DEVICE_TABLE variable to ROOTFS_FULL_DEVICE_TABLE.
In addition, for consistency, the file itself is renamed
full_device_table.txt.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This tool allows to verify if the OpenCL environment is set up correctly
and provides information related to the supported OpenCL platforms.
Signed-off-by: Valentin Korenblit <valentin.korenblit@smile.fr>
Signed-off-by: Valentin Korenblit <valentinkorenblit@gmail.com>
[Thomas:
- use the libopencl virtual package
- add LICENSE to the license files]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
We need to install the mesa3d-headers, because the CL headers are not
provided by nvidia-driver (just like it didn't provide the OpenGL
headers).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Within the BR2_PACKAGE_NVIDIA_DRIVER_XORG condition, some "="
assignements are used for various variables, which are also appended
in other conditions below in nvidia-driver.mk.
It works fine because those assignements appear earlier in the .mk,
but it is a bit error-prone, so let's use += when adding values to
those variables.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch provides Clover, the OpenCL 1.1 API implementation by Mesa
for AMD GPUs. It generates libOpenCL.so.
Add --disable-opencl-icd because in Mesa 18 it defaults to on. When
disabled, the shared library is named libOpenCL instead of
libMesaOpenCL and CL headers are installed.
Given that clc headers are being installed to a non-standard location,
it is necessary to specify this path in configure.ac. Otherwise,
pkg-config will output the absolute path to these headers located in
STAGING_DIR, which will cause a runtime error when calling
clBuildProgram.
Signed-off-by: Valentin Korenblit <valentin.korenblit@smile.fr>
Signed-off-by: Valentin Korenblit <valentinkorenblit@gmail.com>
[Thomas:
- improve the description of the patch, based on input from Romain
- register as a libopencl provider]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Valentin Korenblit <a class="moz-txt-link-rfc2396E" href="mailto:valentin.korenblit@smile.fr"><valentin.korenblit@smile.fr></a>
Signed-off-by: Valentin Korenblit <a class="moz-txt-link-rfc2396E" href="mailto:valentinkorenblit@gmail.com"><valentinkorenblit@gmail.com></a>
Signed-off-by: Thomas Petazzoni <a class="moz-txt-link-rfc2396E" href="mailto:thomas.petazzoni@bootlin.com"><thomas.petazzoni@bootlin.com></a>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
A flexible forms validation and rendering library for
Python web development.
https://wtforms.readthedocs.io/
Signed-off-by: Grzegorz Blach <grzegorz@blach.pl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch allows to select the installation of additional commands
which are part of the sunxi-tools. It's now possible to e.g. install
sunxi-fel on the target device. The corresponding options have been
added to Config.in and sunxi-tools.mk has been modified respectively.
The default setting is to only build sunxi-nand-part.
On the host building of the misc-tools target is added, which provides
sunxi-nand-image-builder and phoenix_info.
Signed-off-by: Alex Kaplan <kaplan2539@gmail.com>
[Thomas:
- properly format Config.in
- do not select BR2_PACKAGE_HOST_LIBUSB in Config.in.host, since this
option doesn't exist
- properly indent code in sunxi-tools.mk]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit e13855c48f wrongly added
depends on BR2_TOOLCHAIN_USES_UCLIBC && !BR2_USE_MMU
to display the comment "libbsd needs a toolchain w/ threads, wchar"
The same error has also been made for minizip.
To fix this issue, move dependency
!(BR2_TOOLCHAIN_USES_UCLIBC && !BR2_USE_MMU) under
BR2_PACKAGE_LIBBSD_ARCH_SUPPORTS.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Both p1_oauth2 and jiffy are runtime dependencies. Mark the
corresponding select in the Config.in file with a # runtime
comment.
Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently all random defconfigs which are used in autobuilder use size
optimizaion (-Os), since BR2_OPTIMIZE_S=y is the default.
Adding "-O2" optimization will give better test coverage.
In many cases software gets built with speed optimization rather than
size optimization. So let's add Level 2 optimizaion option to be
generated in random defconfigs, so we could be able to test how
packages are built with "-O2" in autobuilder.
Signed-off-by: Evgeniy Didin <Evgeniy.Didin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: arc-buildroot@synopsys.com
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In preparation of more renames, rename the variable that points to the
final users table.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas: as suggested by Arnout, use ROOTFS_FULL_USERS_TABLE instead
of ROOTFS_FINAL_USERS_TABLE.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
libcurl doesn't find any trust path for CA certs when it cross-compiles.
When using OpenSSL, it is explicitly configured to use the SSL cert
directory with OpenSSL style hash files in it. But with GnuTLS, it gets
nothing.
Rather than configure libcurl to use the OpenSSL directory or a bundle
file, configure it to use the GnuTLS default. This way the CA certs
path can be configured in one place (gnutls) and then libcurl and anyone
else who uses gnutls can default to that.
Also, when libcurl with gnutls is configured to use a directory, it ends
up loading each cert three times.
Signed-off-by: Trent Piepho <tpiepho@impinj.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Gnutls is building with no default location to look for CA certs. Since
there are buildroot packages to provide these, configure it to use them
by default.
Configure gnutls to find them using the bundle file which contains all
certs, rather than looking in the cert directory. When gnutls is told
to use the directory, it loads *every* file in it. This means it loads
the bundle with all certs, then loads each cert a second time using the
individual pem files, and then loads them all the third time via the
hash symlinks to the pem files.
When p11-kit is enabled, use its trust module instead of the bundle
file. p11-kit can be configured to use the bundle (the default), but it
can do other things too, such as integrate with the "trust" command for
adding and removing trust anchors.
Signed-off-by: Trent Piepho <tpiepho@impinj.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes the following check-package warning:
package/docker-cli/docker-cli.mk:1: should be 80 hashes (http://nightly.buildroot.org/#writing-rules-mk)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Docker upstream has split the Docker daemon and CLI into separate
codebases:
- github.com/docker/engine: daemon, "dockerd" binary
- github.com/docker/cli: "docker" command line interface
This commit splits the docker-engine package into docker-engine and
docker-cli. Conveniently, the Docker project has begun maintaining
two separate release-tagged repositories for the CLI and daemon as of
v18.06-ce-rc1. Previous versions were tagged in a common "docker-ce"
repository which makes compilation awkward for Buildroot, especially
due to some limitations in the new Go package infrastructure.
Docker repositories "engine" and "cli" recently started tagging
releases. Select the latest stable release, v18.09.0.
The CLI is no longer automatically included with the engine. Users
will need to select BR2_PACKAGE_DOCKER_CLI to produce a both docker
and dockerd target binaries.
Docker CLI can be statically compiled. This enables usage of the
system docker client binary to access the parent daemon API from
within containers, where shared libraries are not available.
While at it, drop the useless host-go dependency from docker-engine,
since it's already added by the golang-package infrastructure.
Signed-off-by: Christian Stewart <christian@paral.in>
[Thomas: drop the host-go dependency from both docker-cli and
docker-engine]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit extends the scancpan script to automatically generate a
test for the Perl module, either if the Perl module uses native
library, or if it has more than one dependency.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit backports an upstream patch that fixes the build of
dt-utils with glibc 2.28+.
Fixes bug #11536.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
fstatfs/statfs on aarch64 seems broken, add a patch from uClibc-ng
upstream git to fix it.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This bump also includes the fix for CVE-2018-6556 released in 3.0.2 via
commit "CVE 2018-6556: verify netns fd in lxc-user-nic": lxc-user-nic
when asked to delete a network interface will unconditionally open a
user provided path:
c1cf54ebf2
This code path may be used by an unprivileged user to check for the
existence of a path which they wouldn't otherwise be able to reach. It
may also be used to trigger side effects by causing a (read-only) open
of special kernel files (ptmx, proc, sys).
Also add a dependency on gcc >= 4.7
(https://github.com/lxc/lxc/issues/2592)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This reverts commit 178eb1d7ea. This
bump causes too many build failures in reverse dependencies of
libglib2, for which a proper solution needs to be found.
See also the analysis from Yann E. Morin:
http://lists.busybox.net/pipermail/buildroot/2018-December/237663.html
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Update second patch
- Remove third and fifth patches (already in version)
- Add a new patch to fix a missing header
- Add LIBGLIB2_GTK_DOC_HOOK so autoreconf do not fail on the following
error:
automake: error: cannot open < gtk-doc.make: No such file or directory
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
realpath is missing on oldish distributions, like Debian 7, which is
still used in the wild.
Use readlink instead; that has been available since the dawn of ages now
(well, coreutils had it in 2003).
Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
libtorrent is a feature complete C++ bittorrent implementation
focusing on efficiency and scalability.
https://www.libtorrent.org/
Signed-off-by: Philipp Richter <richterphilipp.pops@gmail.com>
[Thomas: license is BSD-3c, not BSD-2c]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently, luarocks.mk generates a configuration file with hardcoded
STAGING_DIR, TARGET_DIR, TARGET_CC, LUAROCKS_CFLAGS and TARGET_LDFLAGS
values. This is not compatible with per-package directories, where the
value of STAGING_DIR, TARGET_DIR, TARGET_CC and possibly
TARGET_CFLAGS/TARGET_LDFLAGS may be different from one package to the
other.
Based on input from François Perrad, this commit:
- Changes the Luarocks configuration file to use os_getenv() for the
appropriate variables. Since the contents of this file is not
fixed, it is no longer generated by luarocks.mk using a series of
'echo' but simply concatenated with the rest of the Luarocks
configuration file.
- Adjusts LUAROCKS_RUNV_ENV so that the necessary environment
variables are now passed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
