This patch bumps the CIP Linux kernel to version v4.4.138-cip25
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
gcc-8 started warning about function aliases that have a non-matching
prototype. This seems rather useful in general, but it causes tons of
warnings in the Linux kernel, where we rely on abusing those aliases
for system call entry points, in order to sanitze the arguments passed
from user space in registers.
See https://gcc.gnu.org/bugzilla/show_bug.cgi?id=82435
Disable the attribute-alias warning introduced by gcc-8 by adding
-Wno-attribute-alias to KCFLAGS.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Perf profiling cannot be used if CONFIG_PERF_EVENTS is not enabled in the
kernel configuration. Similar to other tools, like ktap, we can enable the
right options automatically.
Signed-off-by: Jan Heylen <jan.heylen@nokia.com>
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This issue only applies to kernels built with CONFIG_THUMB2=y, so reword the
comment to make that more clear.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit f13477b (linux: config.in: add comment for Arm Cortex-M) added a
comment so that the user that the linux kernel may miscompile with
binutils 2.29+, when the target is an armv7m CPU.
However, the real trigger is a compilation in thumb2 mode, which happens
to be the only option for armv7m CPUs.
We can't know whether the kernel will be built in arm or thumb2 mode,
though, because we do not have that information: it is only available in
the Linux' .config file, which we don;t have access to at the time we
run our menuconfig.
So, relax the conditions under which the comment is made, so that it
appears as soon as binutils are >= 2.29 (i.e. not 2.28, which is the
oldest we support) for ARM CPUs.
[Peter: reword comment]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Christophe Priouzeau <christophe.priouzeau@st.com>
Cc: Laurent GONZALEZ <br22@gezedo.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts commit cbe43fd417.
Now that the binutils default has been changed for ARMv7M, this is no longer
needed.
Signed-off-by: Christophe Priouzeau <christophe.priouzeau@st.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When binutils > 2.28 are selected on Arm Cortex-M cpu,
linux kernel does not boot due to a new implementation
of 'adr pseudo instruction' on binutils.
Bugzilla thread: https://bugs.busybox.net/show_bug.cgi?id=11051
Signed-off-by: Christophe Priouzeau <christophe.priouzeau@st.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch bump the Linux CIP kernel to version v4.4.130-cip23
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Kconfig uses either pkg-config or hard-coded /usr/include paths to find
the ncurses or ncursesw library. If ncursesw is found, it will include
<ncursesw.h>. Since Buildroot's host-ncurses doesn't install a .pc file,
and linux.mk anyway doesn't pass the pkg-config options to find the host
pkg-config files, Kconfig will always find the system's ncursesw.h.
However, since commit dde090c299 (linux: fix passing of host CFLAGS and
LDFLAGS) HOST_LDFLAGS is passed to the linux build system. Thus, if
host-ncurses was already built before 'make linux-menuconfig' is called,
the build will pick up libncurses from the host directory, which is NOT
widechar. Thus, two different ncurses configurations are mixed into the
final mconf program. This will result in serious breakage in the
rendering of the menus (lots of @ and question mark characters).
As a workaround (suggested by Yann), don't pass HOST_CFLAGS and
HOST_LDFLAGS when running kconfig commands. For kconfig, we should never
need host packages anyway. This way, the kconfig calls will always use
the system's ncurses and never our host-ncurses.
Note that the same problem could pop up for other kconfig packages as
well if we ever pass HOST_CFLAGS/HOST_LDFLAGS to them. We could force
HOSTCC=$(HOSTCC) directly in kconfig-package. However, for now there
are no other packages that exhibit this problem, so this can be
revisited when they do.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: David De Grave <david.degrave@essensium.com>
Cc: Scott Fan <fancp2007@gmail.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Tested-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes https://gitlab.com/buildroot.org/buildroot/-/jobs/66561794
LINUX_DTS_NAME may end up with a leading space because of the += logic, and
may contain multiple dts files - Neither of which works when we construct
the {cu,simple}Image.$(LINUX_DTS_NAME) make target name.
Fix it by using the first word in the variable.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
These three symbols:
KERNEL_ARCH_PATH
KERNEL_DTBS
KERNEL_DTS_NAME
are defined and used only inside this file, so use the LINUX_ namespace
for them instead of KERNEL_.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use only one space before backslash.
Remove consecutive empty line.
Indent with tabs.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Make it follow the package coding style by removing redundant info.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Christian Stewart <christian@paral.in>
Cc: David Lechner <david@lechnology.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Custom dts files are still conditionally copied based on non existing
boolean. So it is currently not possible to use custom dts file(s) at all.
List of dts files is now iterated and files are copied into dedicated kernel arch dir.
Signed-off-by: Rafal Susz <rafal.susz@gmail.com>
Tested-by: Jan Kundrát <jan.kundrat@cesnet.cz>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Just use whatever the user specified in the list. An empty list means no
DTS was specified.
No need to add legacy option, as the behaviour does not change.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Simon van der Veldt <simon.vanderveldt@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-by: Joshua Henderson <joshua.henderson@microchip.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some Linux kernel configuration options (such as CONFIG_UNWINDER_ORC)
require building a host program that needs libelf.
Users who have libelf installed on their system won't see a problem,
but users who don't have libelf installed will get a build
failure. Therefore, this commit adds an option that allows a user to
indicate that his Linux kernel configuration requires libelf. When
this option is enabled, we add host-elfutils to the dependencies of
the linux package (host-elfutils provides the libelf library).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some Linux kernel configuration options (such as
CONFIG_SYSTEM_TRUSTED_KEYRING) require building a host program called
extract-cert, which itself needs OpenSSL.
Users having OpenSSL installed on their system won't see a problem,
but users who don't have OpenSSL installed will get a build
failure. This commit adds a new option that allows users to indicate
that their Linux configuration requires building host-openssl.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We were passing HOSTCFLAGS="$(HOSTCFLAGS)" to Linux. However:
- HOSTCFLAGS in Buildroot doesn't exist, and is empty, so this
assignment never did anything. The name of the variable in
Buildroot in HOST_CFLAGS.
- HOSTCFLAGS in Linux isn't used everywhere, and passing it overrides
the default HOSTCFLAGS value defined in the main Linux kernel
Makefile.
In addition, there is no way to pass additional host LDFLAGS in the
Linux kernel build system.
Therefore, we simply shoehorn our HOST_CFLAGS and HOST_LDFLAGS while
passing HOSTCC to the Linux kernel build system. This has been tested
to work fine with host OpenSSL and host libelf only available in
$(HOST_DIR).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
For some boards, for example the Raspberry Pi, it's necessary to build
in-tree dts files as well as custom/out of tree dts-files (dt-blob.bin).
The existing logic made these two options exclusive, this commit changes
that to allow both in-tree as well as custom sources for dts files.
Signed-off-by: Simon van der Veldt <simon.vanderveldt@gmail.com>
[Arnout: re-wrap help, add extra empty line, change = into +=]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add allwinner mali kernel driver package. Used in combination with
userspace Allwinner openGL libraries, it gives possibility to use 3D openGL
SoC acceleration.
[Peter: Rename to sunxi-mali-mainline-driver. Use revision selection from
sunxi-mali-mainline package. Depend on that package and default to
y if dependencies are met. Tweak Linux config]
Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch bump the Linux CIP kernel to version v4.4.112-cip18
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch bumps the Linux CIP version to v4.4.105-cip15.
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch bump the Linux CIP kernel to version v4.4.98-cip13
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, the rule to rebuild the Linux kernel with an initramfs
directly depends on the path of the file of the intermediate cpio image.
This is inherently "bad" from a purity point of view; linux.mk should
not have to delve into the fs internals.
Rather, make it directly depend on the "frontal" rule that generates the
cpio image.
Drop the comment for linux-rebuild-with-initramfs, it was misleading
(talking about generating "the initramfs list of files", which is not
what was done, since we use a cpio as source of initramfs, not a list of
files).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The LINUX_KCONFIG_FIXUP_CMDS are meant to deselect any compression
option that are not selected in the buildroot configuration. But it only
deselects the last one in the list instead of all of them because it
overwrites the LINUX_COMPRESSION_OPT_ variable instead of appending to
it. Only the last option set to that variable gets deselected.
This produces the warning:
.config:2216:warning: override: KERNEL_GZIP changes choice state
is emitted when buildroot runs olddefconfig when buildroot configures a
kernel with a custom config that has a different kernel compression
option set to what is configured in buildroot.
Accumulate all the deselected compression options instead of overwriting
them to ensure all non-selected options get deselected..
Signed-off-by: Cam Hutchison <camh@xdna.net>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Starting with 4.12-rc1, tarballs are generated by cgit directly from
Linus's tree. This also implies that no .tar.xz can be used for them.
This method also applies to older release candidates.
Signed-off-by: Luis Araneda <luaraneda@gmail.com>
[Arnout: added comment in the code]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
We don't add a full stop at the end of the prompt text.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Xtensa core configuration must be added to linux before it can be
built for that xtensa CPU variant. Extract configuration files from the
xtensa overlay as is done for other packages that need to be configured
for a specific xtensa core.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since things are no longer installed in $(HOST_DIR)/usr, the callers
should also not refer to it.
This is a mechanical change with
git grep -l '$(HOST_DIR)/usr/bin' | xargs sed -i 's%$(HOST_DIR)/usr/bin%$(HOST_DIR)/bin%g'
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We don't have a hash for any linux version. We currently also don't
have a hash for the latest version, but if we ever add a hash, it
will only be for the latest version.
This simplifies the code a little because soon we will add hash checks
for git as well, so we also need an exclusion in that case. It's much
easier to always exclude except in the single case where we do have a
hash.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In 4c10eedc1 (systemd: enable required kernel features), we added
setting a few required kernel features to ensure systemd works.
However, there was a typo for one of the variables: CONFIG_TMPFS_XATTR
was written as CONFIG_TMPFS_POSIX_XATTR, which does not exist (and never
ever existed, at least not since 2.6.12)...
Reported-by: Michael Heinemann <posted@heine.so>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Cc: Michael Heinemann <posted@heine.so>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
A long time ago, the blind config option BR2_LINUX_KERNEL_UBOOT_IMAGE
was introduced to be able to trigger the linux -> host-uboot-tools
dependency. Back in those days, there was no user-configurable
BR2_PACKAGE_HOST_UBOOT_TOOLS.
Now, however, it is possible to select a custom kernel image name that
needs uboot-tools, and manually enable BR2_PACKAGE_HOST_UBOOT_TOOLS. In
this case, however, the linux -> host-uboot-tools is missed and the
build is not reproducible. An example of such a situation is the
upcoming CI40 defconfig.
As a solution, remove BR2_LINUX_KERNEL_UBOOT_IMAGE entirely. Instead,
just select BR2_PACKAGE_HOST_UBOOT_TOOLS and add the dependency if it
is selected.
Note that this may introduce a redundant dependency in case the user
selected BR2_PACKAGE_HOST_UBOOT_TOOLS for some other reason (e.g. to
be able to generate a U-Boot environment to include in the image, while
the kernel is built as a zImage). However, the redundant dependency
shouldn't hurt much.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Abhimanyu Vishwakarma <abhimanyu.v@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch adds an easy way to select the CIP project SLTS
kernel within the kernel menu.
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
[Thomas: remove BR2_CIP_KERNEL_REPO_URL option.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We want to use SPDX identifier for license strings as much as possible.
SPDX short identifier for GPLv2/GPLv2+ is GPL-2.0/GPL-2.0+.
This change is done by using following command.
find . -name "*.mk" | xargs sed -ri '/LICENSE( )?[\+:]?=/s/\<GPLv2\>/GPL-2.0/g'
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Whitespaces were searched using the following regex:
[ ]{1,}\t
and then manually removed in most of the cases. For
xserver_xorg-server.mk, tabs before backslashes were removed.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Starting with the release 2016.09 xtensa architecture is supported by
the U-Boot. Enable uimage target in xtensa linux kernel.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fix commit 400eaa3452 ("linux: bump
default to version 4.10") in which a conflict was not correctly
resolved.
Reported-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>