BR2_TARGET_ROOTFS_EXT2_LABEL now defaults to "rootfs", so repeating
that in those defconfigs is no longer necessary.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently the volume-label for the root filesystem partition is a string
wit the following pattern: ad09a287-46a9-4790-ba97-fbbb549e5e96.
Specify the volume-label as "rootfs" to make it easier to identify it.
Suggested-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently the volume-label for the vfat partition is a string with
the following pattern: 5934-861D.
Specify the volume-label as "boot" to make it easier to identify it.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since switch to debian in commit
210ccaef57, host-gperf is needed to
generate frametype.c because debian/patches/add-m4-directory.patch
patches Makefile.am. As a side effect, libid3tag tries to generate
frametype.c from frametype.gperf due to following rule:
$(srcdir)/frametype.c: $(srcdir)/frametype.gperf Makefile.am
cd $(srcdir) && \
gperf -tCcTonD -K id -N id3_frametype_lookup -s -3 -k '*' \
frametype.gperf | \
sed -e 's/\(struct id3_frametype\);/\1/' | \
sed -e '/\$$''Id: /s/\$$//g' >frametype.c
If host-gperf is not available, frametype.c will be empty and build with
madplay will fail on:
configure:17243: checking for snd_pcm_open in -lasound
configure:17268: /home/giuliobenetti/autobuild/run/instance-3/output-1/host/bin/powerpc64-linux-gcc -o conftest -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_FORTIFY_SOURCE=1 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c -lasound -L/home/giuliobenetti/autobuild/run/instance-3/output-1/host/bin/../powerpc64-buildroot-linux-gnu/sysroot/usr/lib -lasound -L/home/giuliobenetti/autobuild/run/instance-3/output-1/host/bin/../powerpc64-buildroot-linux-gnu/sysroot/usr/lib -lid3tag >&5
/home/giuliobenetti/autobuild/run/instance-3/output-1/host/opt/ext-toolchain/bin/../lib/gcc/powerpc64-buildroot-linux-gnu/8.3.0/../../../../powerpc64-buildroot-linux-gnu/bin/ld: /home/giuliobenetti/autobuild/run/instance-3/output-1/host/bin/../powerpc64-buildroot-linux-gnu/sysroot/usr/lib/libid3tag.so: undefined reference to `id3_frametype_lookup'
Fixes:
- http://autobuild.buildroot.org/results/15a8c7f6e34b26446179c04383719ea71495403e
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
EXT_SUFFIX in Python versions > 3.5 contains a platform tag which only applies
to cpython extensions. Given that ctypes.util.find_library does not work on the
target due to the absence of the underlying tools '.so' needs to be added as a
possible suffix for libraries to enable python-iptables to find the iptables
shared libraries.
Signed-off-by: Frank Vanbever <frank.vanbever@essensium.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
ctypes.util.find_library() depends on gcc and friends to detect the location of
a given shared library. Given that these are not available on the target and
that python-iptables depends on this functionality we need to work around this.
The SONAMEs of the libc are well known so we try the known ones for glibc,
uClibc and musl.
Fixes: https://bugs.busybox.net/show_bug.cgi?id=12271
Signed-off-by: Frank Vanbever <frank.vanbever@essensium.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The package uses ctypes.CDLL extensively which only makes sense when dynamic
libraries are available.
Signed-off-by: Frank Vanbever <frank.vanbever@essensium.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Changelog: https://gitlab.com/limitland/comixcursors/-/blob/master/NEWS
Original repository was moved to gitlab.com, changed _SITE accordingly.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Fix CVE-2020-10932: fix side channel in ECC code that allowed an
adversary with access to precise enough timing and memory access
information (typically an untrusted operating system attacking a
secure enclave) to fully recover an ECDSA private key.
- Fix a potentially remotely exploitable buffer overread in a DTLS
client when parsing the Hello Verify Request message.
- Fix bug in DTLS handling of new associations with the same parameters
(RFC 6347 section 4.2.8): after sending its HelloVerifyRequest, the
server would end up with corrupted state and only send invalid records
to the client. An attacker able to send forged UDP packets to the
server could use that to obtain a Denial of Service. This could only
happen when MBEDTLS_SSL_DTLS_CLIENT_PORT_REUSE was enabled in
config.h (which it is by default).
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
As of upstream commit 3a5e6219a2b62af076caa4f37fab9258165ec266 msgpack
is now required.
License hash change is due to date update in upstream commit
cf83d1d429ecebb093f6eaab773bd41c251530ca.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
License hash change is due to httplib2 package version number update.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Drop upstream patches.
Remove CVE annotation; issue fixed upstream.
Depend on MMU. Upstream removed support for fork-less targets (commit
48d12f14c9c).
Reformat hashes file with two spaces delimiter. Remove stale 2.79
tarball hash entry.
Cc: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
By default, exim stores its PID file in /var/spool/exim, and its log
file in /var/spool/exim/log, but it makes a lot more sense to have the
logs in /var/log/exim and the PID file in /var/run/exim.
Using binary name subdirectory in both cases allows for the use of
systemd's LogsDirectory and RuntimeDirectory statements
Signed-off-by: Pascal de Bruijn <p.debruijn@unilogic.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Removed patch applied upstream in updated form:
2122fe08cc
Added new patch to fix subsequent build error on mips.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[yann.morin.1998@free.fr: two spaces in hash file]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
[Thomas: add PSF-2.0 to the licenses and LICENSE.PSF to the license files.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[yann.morin.1998@free.fr: two spaces in hash file]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add initial support for Nanopi R1 board with below features:
- U-Boot 2019.01
- Linux 5.0
- Default packages from buildroot
Configuration files taken from Armbian:
https://github.com/armbian/build/blob/master/patch
Signed-off-by: Davide Viti <zinosat@gmail.com>
[Thomas: move U-Boot config and DT to board/friendlyarm/nanopi-r1/uboot/]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Switched _SITE to https.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[yann.morin.1998@free.fr: two spaces in hash file]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Changelog: https://www.glfw.org/changelog.html
Updated license hash due to upstream commit:
f764836e58
xlib_libXi is now a mandatory dependency:
9cc83cf07fb383e70021
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[yann.morin.1998@free.fr: two spaces in hash file]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
