Some ATF configurations, require a pre-built bare metal toolchain to
build some platforms which host cortex-m series core, for instance
rockchip rk3399 has a cortex-m0 core. Without a pre-built bare metal
toolchain, the build fails:
make[3]: arm-none-eabi-gcc: Command not found
To solve this, this commit implements a
BR2_TARGET_ARM_TRUSTED_FIRMWARE_NEEDS_ARM32_TOOLCHAIN
option. Platforms which have such requirement should enable this
config option.
Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Some ATF configurations, such as the ones for the STM32MP1 processor
family, require DTC during the build as Device Tree files are
used. Without dtc, the build fails:
/bin/sh: 1: dtc: not found
dtc version too old (), you need at least version 1.4.4
plat/st/stm32mp1/platform.mk:239: recipe for target 'check_dtc_version' failed
make[1]: *** [check_dtc_version] Error 1
To solve this, this commit implements a
BR2_TARGET_ARM_TRUSTED_FIRMWARE_NEEDS_DTC option, in a way that mimics
the BR2_TARGET_UBOOT_NEEDS_DTC option we already have for the U-Boot
package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add missing qstrip wrapping to the new
BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_TARGETS option.
Signed-off-by: Francois Gervais <fgervais@distech-controls.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Allow specifying additional build targets for ATF.
This might be more useful when using a custom git repository.
For example, when using with the ATF repository from NXP QorIQ,
there is a new build target 'pbl' which is used to build the
pbl binary image. Note that in the specific case of the 'pbl'
target, additional build variables also need to be specified
through BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES.
Signed-off-by: Francois Gervais <fgervais@distech-controls.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently, when BR2_TARGET_ARM_TRUSTED_FIRMWARE_UBOOT_AS_BL33 is
enabled, the arm-trusted-firmware package assumes that the BL33 image
provided by U-Boot is u-boot.bin. However for some platforms, the name
may be different (for example u-boot-dtb.bin). To support such use
cases, this commit adds a string option
BR2_TARGET_ARM_TRUSTED_FIRMWARE_UBOOT_BL33_IMAGE to configure the
U-Boot image name, which defaults to u-boot.bin to preserve backward
compatibility.
Signed-off-by: Jerry Huang <jerry.huang@nxp.com>
Reviewed-by: Sergey Matyukevich <geomatsi@mail.com>
[Thomas: rewrite commit log and Config.in help text]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This adds support for different platforms where the binaries have
different extensions.
Signed-off-by: Michael Schenk <michael.schenk@noser.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The licensing information, and especially the name of the license file,
is known only for the official v1.4 version. For example, in later
versions, the license file has been renamed.
Since we can't be sure of the licensing information for custom versions,
or for versions from git, define that only for the known v1.4 version.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Adam Duskett <aduskett@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When the trusted firmware is built with debug support (DEBUG defined),
the generated images are located in a different path compared to a
build without debug support. The non debug images are located in
generated directory build/<platform>/release/ while the debug images
are located in generated directory build/<platform>/debug/.
This change introduces the boolean option
BR2_TARGET_ARM_TRUSTED_FIRMWARE_DEBUG to define whether the release or
debug configuration is used to build trusted firmware.
Note that enabling trusted firmware debug support using
BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES="... DEBUG=1 ..."
would not work since Buildroot will try to copy the generated files
from the wrong path.
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This change allows one to build trusted firmware (TF-A) with OP-TEE as
BL32 secure payload.
When BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL32_DEFAULT is enabled TF-A
builds a BL32 stage according the TF-A configuration directive. If
these specify no BL32 stage then TF-A will build without BL32
support. This is the default configuration and reflects TF-A legacy
integration in BR.
When BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL32_OPTEE is enabled TF-A builds
with support for the OP-TEE OS as BL32.
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
[Thomas: rename config options, simplify option prompts, and rework
option description.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This change allows one to build the TF-A (Trusted Firmware A) for
32bit architectures Armv7 and Armv8 platforms. TF-A supports these
configuration since release v1.5.
Change dependency on BR2_aarch64 into a dependency on either
BR2_ARM_CPU_ARMV8A/BR2_ARM_CPU_ARMV7A to better define
the target architectures supported by the package.
Set package configuration directive ARM_ARCH_MAJOR according to
BR2_ARM_CPU_ARMV8A/BR2_ARM_CPU_ARMV7A. Set package configuration
directive ARCH based on BR2_aarch64/BR2_arm.
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Rockchip's rk3328 encapsulates the BL31 part of ATP but it needs
image in ELF format. This is extension to
2c4809e608
This commit introduces a BR2_TARGET_UBOOT_NEEDS_ATF_BL31_ELF variable
to achieve this.
Signed-off-by: Michał Łyszczek <michal.lyszczek@bofc.pl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Allow user to choose specific, stable version from official ATF
repository
Signed-off-by: Michał Łyszczek <michal.lyszczek@bofc.pl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
We already use $(MKIMAGE_ARCH) in lots of places; use it here too.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
We already use $(MKIMAGE) instead of $(HOST_DIR)/bin/mkimage in xvisor, linux,
and cpio; use it here too.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Passing CFLAGS/CPPFLAGS in the environment confuses the ATF version
provided by Marvell, and we in fact only need to pass CROSS_COMPILE,
which is already in ARM_TRUSTED_FIRMWARE_MAKE_OPTS.
We however keep TARGET_MAKE_ENV so that the PATH with $(HOST_DIR) is
kept.
This change has been tested with all current defconfigs that build
ATF:
- arm_juno
- bananapi_m64
- freescale_imx8mqevk
- friendlyarm_nanopi_a64
- friendlyarm_nanopi_neo2
- nitrogen8m
- olimex_a64_olinuxino
- orangepi_pc2
- orangepi_prime
- orangepi_win
- orangepi_zero_plus2
- pine64
- pine64_sopine
- solidrun_macchiatobin_mainline
- solidrun_macchiatobin_marvell
- zynqmp_zcu106
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
U-Boot SPL for the Xilinx ZynqMP SoCs needs ATF in this format to load
it.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The path to the binary images is very long. Since we are about to make
a larger use of it, let's use a variable to make it somewhat shorter.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
ATF >= 1.3 builds a host program called fiptool which uses
OpenSSL, so we need to build host-openssl. We could have made it an
optional dependency like U-Boot does, but since most ATF versions are
going to be >= 1.3 in the near future, we simply make host-openssl a
mandatory dependency.
However, the ATF build system is not very good, and you can't easily
pass flags that will affect the build of host programs. Therefore, we
take the approach of building fiptool separately before triggering the
real build process.
It would obviously be better to fix ATF itself, but as usual with
those bootloader packages, we fetch different versions depending on
the platform/configuration, making it difficult to use patches.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/44868961
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add Marvell Armada 7k/8k SoCs support to arm-trusted-firmware package.
Marvell ATF needs two additional dependencies:
DDR training code and SCP_BL2 image.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
[Thomas: adjust to previous ATF changes.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some platforms (e.g Allwinner ARM64) don't build a FIP image out of
ATF, but only a BL31 image, which is then encapsulated in U-Boot. This
commit adds an ATF option to build such an image.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
ATF can be used in different ways:
- ATF encapsulates U-Boot as the BL33, which is what is done on ARM
Juno (currently supported in Buildroot) and Marvell platforms (soon
to be supported)
- U-Boot encapsulates ATF's BL31, which is what is done on Allwinner
ARM64 platforms.
Until now we were assumming the former was always the case, but
obviously it isn't. Therefore, this patch adds an option that allows
to explicitly tell ATF that it encapsulates U-Boot as its BL33.
We adapt the only defconfig that uses ATF so that it enables this
option as appropriate.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, our arm-trusted-firmware unconditionally builds a FIP
(Firmware Image Package). While this is often needed on platforms
where ATF encapsulates U-Boot, it is not the case on some other
platforms where it's U-Boot that encapsulates parts of ATF.
In order to prepare the support for the later platforms, we make
building the FIP image optional, and update the only defconfig we have
that uses ARM Trusted Firmware.
Note: we considered adding a "default y" here to preserve backward
compatibility, but there really isn't any default that is sane:
whether a FIP image needs to be built or not is purely platform
specific.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The license file got reformatted as reStructuredText, but the license itself
didn't change.
Drop unneeded md5sum and add license hash.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
ARM_TRUSTED_FIRMWARE_MAKE_TARGET is expanded, but it's never assigned
so it is always empty. On the other hand the make targets are defined
in ARM_TRUSTED_FIRMWARE_MAKE_OPTS, which should contain options, not
targets.
Clean it all up by moving the targets in the proper place, replacing
the useless $(ARM_TRUSTED_FIRMWARE_MAKE_TARGET).
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since we will enable hash checks for git downloads soon, the hash check
for the custom git download should be disabled.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We want to use SPDX identifier for license string as much as possible.
SPDX short identifier for BSD-3c is BSD-3-Clause.
This change is done using following command.
find . -name "*.mk" | xargs sed -ri '/LICENSE( )?[\+:]?=/s/BSD-3c/BSD-3-Clause/g'
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Joao Pinto <jpinto@synopsys.com>
[Thomas:
- Rename the package from atfirmware to arm-trusted-firmware, in order
to match upstream.
- Remove option to apply custom patches. We no longer add such options,
and use the global patch directory instead.
- Rename the repo URL/version options, in order to not be Git specific,
in case support for fetching from other VCS is added later. This is
consistent with how other bootloaders handle this.
- Add license information.
- Do not add a weird dependency on the vexpress-firmware package in
Config.in. Instead, simply use it if it's available. Of course, some
configurations (such as the juno configuration) will fail to build if
vexpress-image is not enabled, but it's the responsibility of the
user to create a config that builds.
- Simplify misc aspects in the .mk file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
