This patch adds xradio wireless driver for SDIO WiFi chip XR819.
The out-of-tree driver is sourced from fifteenhex's work
on github https://github.com/fifteenhex/xradio
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
[Thomas: add entry in DEVELOPERS file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
[Thomas: "depends on" before "select" in Config.in]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch backports two patches that have been sent upstream as a pull
request in order to fix sshd for MIPS64 n32.
The first patch adds support for detecting the MIPS ABI during the
configure phase.
The second patch sets the right value to seccomp_audit_arch taking into
account the MIPS64 ABI.
Currently seccomp_audit_arch is set to AUDIT_ARCH_MIPS64 or
AUDIT_ARCH_MIPSEL64 (depending on the endinness) when openssh is built
for MIPS64. However, that's only valid for n64 ABI. The right macros for
n32 ABI defined in seccomp.h are AUDIT_ARCH_MIPS64N32 and
AUDIT_ARCH_MIPSEL64N32, for big and little endian respectively.
Because of that an sshd built for MIPS64 n32 rejects connection attempts
and the output of strace reveals that the problem is related to seccomp
audit:
[pid 194] prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, {len=57,
filter=0x555d5da0}) = 0
[pid 194] write(7, "\0\0\0]\0\0\0\5\0\0\0Ulist_hostkey_types: "..., 97) = ?
[pid 193] <... poll resumed> ) = 2 ([{fd=5, revents=POLLIN|POLLHUP},
{fd=6, revents=POLLHUP}])
[pid 194] +++ killed by SIGSYS +++
Pull request: https://github.com/openssh/openssh-portable/pull/71
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add support for specifying multiple image files in
BR2_TARGET_BAREBOX_IMAGE_FILE config option.
This is useful for boards with several RAM size variants.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
[Thomas: rename internal variable from $(1)_IMAGE_FILE to
$(1)_IMAGE_FILES.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Default bootargs have changed in U-Boot for this board. Build U-Boot
environment and add it to the SD card image to update bootargs.
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
at91sam9x5ek_mmc board was missing in the previous patch adding 1M
offset for FAT partition to solve some boot issues with the ROM code.
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Updating version to latest as on 26 June 2017 to include kmstest utility
Signed-off-by: Venkateswara Rao Mandela <venkat.mandela@ti.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Upstream uploaded a new tarball with the same version number 2016-09-08,
some time after the update to v2.0.9 in buildroot. Someone noticed, but
upstream set the ticket to wontfix, and promised to do better in the
future: https://sourceforge.net/p/iperf2/tickets/20/
Signed-off-by: Alexander Dahl <post@lespocky.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes the following security issues:
CVE-2017-1000381: The c-ares function `ares_parse_naptr_reply()`, which is
used for parsing NAPTR responses, could be triggered to read memory outside
of the given input buffer if the passed in DNS response packet was crafted
in a particular way.
https://c-ares.haxx.se/adv_20170620.html
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
remove input-tools, it has been obsoleted by linuxconsoletools
linuxconsoletools uses the same name as upstream and carries
the latest version of the tools installed by input-tools.
Signed-off-by: Koen Martens <gmc@sonologic.nl>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
CVE-2017-3167: In Apache httpd 2.2.x before 2.2.33 and 2.4.x before 2.4.26,
use of the ap_get_basic_auth_pw() by third-party modules outside of the
authentication phase may lead to authentication requirements being bypassed.
CVE-2017-3169: In Apache httpd 2.2.x before 2.2.33 and 2.4.x before 2.4.26,
mod_ssl may dereference a NULL pointer when third-party modules call
ap_hook_process_connection() during an HTTP request to an HTTPS port.
CVE-2017-7659: A maliciously constructed HTTP/2 request could cause
mod_http2 to dereference a NULL pointer and crash the server process.
CVE-2017-7668: The HTTP strict parsing changes added in Apache httpd 2.2.32
and 2.4.24 introduced a bug in token list parsing, which allows
ap_find_token() to search past the end of its input string. By maliciously
crafting a sequence of request headers, an attacker may be able to cause a
segmentation fault, or to force ap_find_token() to return an incorrect
value.
CVE-2017-7679: In Apache httpd 2.2.x before 2.2.33 and 2.4.x before 2.4.26,
mod_mime can read one byte past the end of a buffer when sending a malicious
Content-Type response header.
While we're at it, use the upstream sha256 checksum instead of sha1.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes the following security issues:
CVE-2017-3140 is a denial-of-service vulnerability affecting 9.9.10,
9.10.5, 9.11.0->9.11.1, 9.9.10-S1, and 9.10.5-S1 when configured with
Response Policy Zones (RPZ) utilizing NSIP or NSDNAME rules.
https://kb.isc.org/article/AA-01495/74/CVE-2017-3140
CVE-2017-3141 is a Windows privilege escalation vector affecting
9.2.6-P2+, 9.3.2-P1+, 9.4.x, 9.5.x, 9.6.x, 9.7.x, 9.8.x, 9.9.0->9.9.10,
9.10.0->9.10.5, 9.11.0->9.11.1, 9.9.3-S1->9.9.10-S1, and 9.10.5-S1. The
BIND Windows installer failed to properly quote the service paths,
possibly allowing a local user to achieve privilege escalation, if
allowed by file system permissions.
https://kb.isc.org/article/AA-01496/74/CVE-2017-3141
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
[Thomas: propagate paho-mqtt dependencies, use alphabetic ordering.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
[Thomas: propagate rabbitmq-c dependency, use alphabetic ordering.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
janus-gateway supports many different transports, and currently there
is no implicit way to turn them off or on. Instead, if the dependency
happens to be built, then the transport is enabled.
Create a transports section in the config file and add
BR2_PACKAGE_JANUS_REST as the first transport.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
[Thomas: propagate thread dependency.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Such a construct allows to bail out if the installation of one of the
program fails, which the current shell-based for loop doesn't do.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This revision includes:
- Moving from a handwritten makefile to autotools.
- Restructuring and cleaning up the source tree.
- Fixing the problems that the patches in the package/mtd directory fixed.
Changes:
- Move from generic-package to autotools-package in mtd.mk.
- Remove no longer necessary patches.
- Update binary locations in mtd.mk
- Update library/header locations in mtd.mk
- Remove MTD_ADD_MISSING_LINTL definition from mtd.mk, as it's no longer
needed.
Tested with toolchains compiled with musl, uclibc, and glibc.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
[Thomas: additional improvements
- introduce hidden options BR2_PACKAGE_MTD_JFFS_UTILS,
BR2_PACKAGE_MTD_UBIFS_UTILS and BR2_PACKAGE_MTD_TESTS that match the
./configure options of mtd. Those hidden options select the
appropriate dependencies checked by the configure script, and are
selected by the existing per-tool Config.in options.
- .mk file is changed to handle properly the new hidden options
BR2_PACKAGE_MTD_JFFS_UTILS, BR2_PACKAGE_MTD_UBIFS_UTILS and
BR2_PACKAGE_MTD_TESTS.
- .mk file is changed to properly handle BR2_PACKAGE_ACL, by passing
--with-xattr/--without-xattr.
- remove HOST_MTD_BUILD_CMDS and HOST_MTD_INSTALL_CMDS, those are no
longer needed since we have an autotools-package now.
- MTD_STAGING_y and MTD_INSTALL_STAGING_CMDS are removed, we use the
default staging installation commands, that install everything that
is needed.
- the MTD_TARGETS_UBI_y variable is merged into MTD_TARGETS_y, as we no
longer need to distinguish both.
- integck installation logic is moved into MTD_TARGETS_y.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In buildroot ffmpeg uses x264 as optional dependency if
BR2_PACKAGE_FFMPEG_GPL is enabled at the same time.
If BR2_PACKAGE_FFMPEG_GPL is disabled and ffmpeg is built without x264
support before x264 itself is build, x264 picks up certain ffmpeg libs
as optional dependency leading to build errors because x264 does not
correctly link statically against ffmpeg.
To avoid a circular dependency and to avoid teaching x264 how to
correctly link statically with ffmpeg we just disable all ffmpeg-
related options.
Fixes
http://autobuild.buildroot.net/results/36a/36abb5b8f3aab57fb7b63056b216b4a58143ee3e/
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Buildroot no longer supports toolchains with glibc older than 2.17, so there
is no need to check whether librt is required for clock_* system calls.
Cc: Rhys Williams <github@wilberforce.co.nz>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Buildroot no longer supports toolchains with glibc older than 2.17, so there
is no need to check whether librt is required for clock_* system calls.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Buildroot no longer supports toolchains with glibc older than 2.17, so there
is no need to check whether librt is required for clock_* system calls.
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Buildroot no longer supports toolchains with glibc older than 2.17, so there
is no need to link with librt for clock_* system calls.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Buildroot no longer supports toolchains with glibc older than 2.17, so there
is no need to link with librt for clock_* system calls.
The following patches are not renumbered. The noise is too high.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Buildroot no longer supports toolchains with glibc older than 2.17, so there
is no need to link with librt for clock_* system calls.
Cc: Michael Rommel <rommel@layer-7.net>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Buildroot no longer supports toolchains with glibc older than 2.17, so there
is no need to link with librt for clock_* system calls.
Cc: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The CodeSourcery x86 and sh, the ADI Blackfin, and the Xilinx Mircoblaze
external toolchain profiles have all been removed. Update the manual.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove mention of toolchains the we don't have.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The CodeSourcery sh toolchain has been removed. Drop negative dependencies on
that toolchain.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since glibc 2.17, executable link command need not include the -lrt option for
clock_* system calls. As a result, over time less and less software packages
bother to check whether to toolchain needs -lrt. We are now at a point where
maintainers refuse to add this complexity into their build system. This
requires Buildroot to carry patches fixing this issue indefinitely.
glibc 2.17 is now 4.5 years old. There is no reason to use an older version
with current software.
This commit removes the predefined profile for CodeSourcery sh toolchain that
is based on glibc 2.16. One may still use the custom external toolchain
support in Buildroot to get this toolchain back, and deal with any build
issues that this toolchain causes.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since glibc 2.17, executable link command need not include the -lrt option for
clock_* system calls. As a result, over time less and less software packages
bother to check whether to toolchain needs -lrt. We are now at a point where
maintainers refuse to add this complexity into their build system. This
requires Buildroot to carry patches fixing this issue indefinitely.
glibc 2.17 is now 4.5 years old. There is no reason to use an older version
with current software.
This commit removes the predefined profile for CodeSourcery x86 toolchain that
is based on glibc 2.16. One may still use the custom external toolchain
support in Buildroot to get this toolchain back, and deal with any build
issues that this toolchain causes.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Buildroot can build non-uClibc toolchains internally for quite some time now.
Update the manual text.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add patch to fix following error:
| ../../libtirpc-1.0.1/src/xdr_sizeof.c:93:13: error: 'uintptr_t' undeclared (first use in this function); did you mean '__intptr_t'?
| if (len < (uintptr_t)xdrs->x_base) {
| ^~~~~~~~~
This error occurs with the latest glibc master version (during the testing I had
glibc commit 92bd70fb85bce57ac47ba5d8af008736832c955a), but doesn't occur with
version 2.25.
Patch includes stdint.h to provide uintptr_t.
It has been submitted upstream:
https://sourceforge.net/p/libtirpc/mailman/message/35850276/
Signed-off-by: Dmitrii Kolesnichenko <dmitrii@synopsys.com>
[Thomas: reformat as Git formatted patch.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The recent change to default to gcc 6 for the internal toolchain broke this
defconfig as the u-boot and linux kernel are too old to build with gcc 6.
Fit it by backporting the following commits:
- u-boot: 9b2c282b34 (compiler*.h: sync include/linux/compiler*.h with Linux 4.5-rc6)
- linux: cb984d101b (compiler-gcc: integrate the various compiler-gcc[345].h files)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This package provides a kernel module and utilities in order to use
v4l2loopback virtual devices. This module allows you to create
"virtual video devices" normal (v4l2) applications will read these
devices as if they were ordinary video devices, but the video will not
be read from e.g. a capture card but instead it is generated by
another application.
Signed-off-by: Alexandre Esse <alexandre.esse.dev@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
