Fixes linker error
http://autobuild.buildroot.net/results/c6272ac900d1a53b976839ac4f50a210b3e6b354
On powerpc64 (and powerpc64le) the build fails due to linker problems
because of an old (2003) workaround for powerpc64, presumably working
around an old toolchain problem that is no longer present. Removing
the workaround allows the build to succeed. A new patch is added for
this.
Additionally, there was a mistake in patch 3: the patch added a test
for HAVE_LIBDL to include/alsa-symbols.h but it was positioned in the
file before config.h was included, so HAVE_LIBDL is never seen as
defined. The test was also using HAVE_LIBDL (which indicates the
library) rather than HAVE_DLFCN (which indicates the header).
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This fixes a struct redefinition problem like this one:
================================
In file included from /usr/include/linux/if_tunnel.h:6:0,
from iptunnel.c:34:
/usr/include/linux/ip.h:85:8: error: redefinition of 'struct iphdr'
struct iphdr {
^
In file included from iptunnel.c:29:0:
/usr/include/netinet/ip.h:45:8: note: originally defined here
struct iphdr
^
================================
iptunnel.c includes netinet/ip.h which contains a definition of the
iphdr struct.
iptunnel.c also includes linux/if_tunnel.h which includes linux/ip.h
which contains a definition of the iphdr struct.
So, both netinet/ip.h and linux/ip.h define the iphdr struct, and both
of them have been included directly or indirectly by iptunnel.c. Because
of that the compilation fails due to a struct redefinition.
The problem can be solved by just not including netinet/ip.h.
The patch has been sent upstream as a merge request:
https://sourceforge.net/p/net-tools/code/merge-requests/3/
Fixes:
http://autobuild.buildroot.net/results/dce/dce499da84b2a41bab946d5109a283ccb85c8b81/
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
configs/mx6udoo_defconfig supports the quad and dual-lite variants,
so there is no need to keep udoo_quad_defconfig anymore.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The top-level Makefile contains an "override O := $(O)" statement that
is purportedly required to make sure the O flag doesn't leak into the
environment of sub-makes. However, since commit 173135d, there is
already an "override O := ..." a few lines down. Therefore, the first
override is redundant.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We reset MAKEOVERRIDES to avoid passing down variables that are
overridden on the command line to the package build systems. Indeed,
the variables overridden on the command line will be Buildroot
variables and not relevant to the package build system. In particular
the O option is used by some packages and the value passed in on the
command line is plain wrong for the individual package.
However, in commit 916e614b, MAKEOVERRIDES was moved earlier and it
was reset _before_ re-entering make in the cases when something has
to be fixed up (incorrect umask, non-absolute paths in O or CURDIR).
Therefore, if make is re-entered, any command line overrides are lost.
This particularly bites the autobuilders, because they use
O=<relative path> to specify the output directory, and they add
BR2_JLEVEL=... to avoid starting too many jobs in parallel. The
BR2_JLEVEL override is lost.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Samuel Martin <s.martin49@gmail.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Tested-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Merge the two entries of Richard Braun under the correct address.
Cc: Richard Braun <rbraun@sceen.net>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The FriendlyARM Nanopi NEO is a 4x4cm² board with an Allwiner H3 SoC:
- quad-core Cortex-A7 @1.2GHz
- 256 or 512MiB of DDR
- uSDCard as only storage option
- 3x USB 2.0 host (one socket, two on expansion pin-holes)
- 1x USB 2.0 OTG (also used as power source)
- 10/100 etehrnet MAC
- GPIOs, SPI, I2c...
Support for the Nanopi NEO in U-Boot and Linux is very recent, so much
so that we have to use an -rc tag for U-Boot and a special Linux tree.
As for Linux, I pushed a git tree on Github with a single tag that
matches what is currently queued in the sunxi-next queued for 4.10,
based on 4.9-rc3. All those commits are from Maxime's tree, the
maintainer for most sunxi stuff.
This also means that we can't use the Linux headers from the kernel
being built (which is what we usually do) because those report 4.9,
while Buildroot currently knows only of 4.8 at best. So this is what we
use.
Unfortunately, support for the ethernet MAC and the USB OTG are not yet
upstream, but are being actively worked on.
The Nanopi NEO is very similar to the Orangepi PC, so I was able to
scanvenge most of its configuration. ;-)
Thanks Maxime for your help on IRC! :-)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
fakeroot misbhaves when there are SElinux contexts, as reported in #9386,
and further detailed in https://bugzilla.redhat.com/show_bug.cgi?id=1238802
A proposal in the FC bug is to use pseudo instead of fakeroot. Pseudo is
a from-scratch re-implementation of fakeroot; it is used in Poky/OE
instead of fakeroot.
Fixes#9386.
Reported-by: Andrey Yurovsky <yurovsky@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Andrey Yurovsky <yurovsky@gmail.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Pseudo is a program that can either be used directly or as an
LD_PRELOAD, which allows these operations to succeed as if the
user did have system administrator privileges even though they
are an ordinary user.
Pseudo has a lot of similarities to fakeroot but is a new
implementation that improves on the problems seen using fakeroot.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Andrey Yurovsky <yurovsky@gmail.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
tinyalsa has started doing release, so we will use it.
With this release, both our patches were applied mainline:
- 0001-tinypcminfo-make-function-pcm_get_format_name-static.patch [1]
- 0002-asound.h-include-time.h-to-get-struct-timespec-proto.patch [2]
The Makefile has changed a lot, so we take advantage of that to simplify
our package.
1. 7d204edfe8
2. c8333f8c7a
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
[Thomas: add patch to remove doxygen usage.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since Babeltrace 1.4, there is support for printing debug information
along with compatible traces and event records. Babeltrace needs
elfutils in this case.
Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
[Thomas:
- add better description for
0002-m4-ax_lib_elfutils.m4-add-cache-variable.patch
- use automatic dependency on elfutils rather than a very complicated
Config.in symbol]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Although Babeltrace is available for all major Linux distributions, some
of them have a quite old version of this project.
Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Current patches are dropped because they were merged upstream.
Official upstream site of Babeltrace for the distribution of tarballs
changed from lttng.org to efficios.com (see
<http://diamon.org/babeltrace>).
Official Babeltrace's website changed from
<http://www.efficios.com/babeltrace> to <http://diamon.org/babeltrace>.
I explicitly disable the support for debug informations in this patch to
add it in a separate patch.
Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The current patches are dropped because they were merged upstream.
The new patches exist to fix the build with musl. They were submitted on
the lttng-dev mailing list, but not merged yet, or not merged in 2.8.2.
LTTng-tools now has its man pages written in AsciiDoc and they get
converted to troff at build time. This is not needed in a Buildroot
image anyway.
The --enable-lttng-ust/--disable-lttng-ust configure options are renamed
to --with-lttng-ust/--without-lttng-ust in v2.8.
Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This uses the ev3dev linux extension to compile the ev3dev drivers for
LEGO MINDSTORMS EV3.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This adds an ev3dev Linux drivers extension that provides Linux kernel
drivers for LEGO MINDSTORMS EV3 from the ev3dev project.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This adds a script to create SD card and flash images for LEGO MINDSTORMS
EV3 using the genimage tool.
The default kernel config had to be modified to add support for squashfs
and to add a ram disk.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This adds U-Boot configuration for LEGO MINDSTORMS EV3. U-Boot has
had support for LEGO MINDSTORMS EV3 since v2016.05.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
CVE-2016-8864 - denial-of-service vector which can potentially be
exploited against BIND 9 servers.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
[Thomas: fix hash URL in .hash file, noticed by Vicente.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
List of fixed CVEs:
CVE-2016-8615: cookie injection for other servers
CVE-2016-8616: case insensitive password comparison
CVE-2016-8617: OOB write via unchecked multiplication
CVE-2016-8618: double-free in curl_maprintf
CVE-2016-8619: double-free in krb5 code
CVE-2016-8620: glob parser write/read out of bounds
CVE-2016-8621: curl_getdate read out of bounds
CVE-2016-8622: URL unescape heap overflow via integer truncation
CVE-2016-8623: Use-after-free via shared cookies
CVE-2016-8624: invalid URL parsing with '#'
CVE-2016-8625: IDNA 2003 makes curl use wrong host
Full ChangeLog:
https://curl.haxx.se/changes.html#7_51_0
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Adding a comment to explain how to update the bootloader since it is
located in NOR flash memory.
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Changelog:
- Add -P for overriding the password prompt we search for
- Add -v for verbose logging of the prompt detection prompt.
- Allow packagers and compilers to change the default password prompt.
- When giving -V, also print the default password prompt.
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Changelog:
- Coverity fixes for checkign return values, unused values, null checking
- H.263 encoder invalid frame rate
This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-freescale/commit/fd160ae9
Implicitly tested through gstreamer as the 0.10 plugin relies on it:
# gst-launch-0.10 playbin uri=file:///root/tears_of_steel_1080p.webm
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Changelog:
- Update license checksum to align to EULA
- Updates for coverity, memory leaks, corrupted content
This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-freescale/commit/4bbd9dc4
Implicitly tested through gstreamer as the 0.10 plugin relies on it:
# gst-launch-0.10 playbin uri=file:///root/tears_of_steel_1080p.webm
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Changelog
- Upgrade license chksum to v14 EULA
- Check for lib_src_ppp_arm11_elinux.so library before removing
- Fixes for error hadling and robustness
This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-freescale/commit/78856879
Implicitly tested through gstreamer as the 0.10 plugin relies on it:
# gst-launch-1.0 playbin uri=file:///root/tears_of_steel_1080p.webm
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-freescale/commit/51148d70
This package has been tested with the following commands:
# modprobe galcore
# cd /usr/share/examples/viv_samples/vdk/
# ./tutorial7
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bug Fixes for P8.6 Graphics includes:
3D: MGS-2239 Destroy EGL window surface and makecurrent new surface
cause segmentation fault
3D: MGS-2237 [6Q-SDB] FB met GPU STATE DUMP when testing ES30
Conformance 100%
3D: MGS-2101 EGLImage created with an OpenVG parent image always returns
EGL_BAD_ACCESS
3D: MGS-2086 Met GPU dump when do driver test under dvfs stress test
3D: MGS-2150 optimized vertex copy for attribute upload
3D: MGS-2100 CubeMap sub-texture copy disappears when small size and
small x/y offset
3D: MA-8321 testTextureViewStress200Hz fail on kk4.4.3_2.0.1 with GPU
5.0.11p8
3D: MA-8302 testOpenGlEsVersion fail on kk4.4.3_2.0.1 with GPU 5.0.11p8
3D: MA-8300 Fix antutu3.0.3 2D/3D performance downgrade
3D: MA-8104 fix Antutu6.x benchmark 3D not supported issue
3D: MA-8110 Change NOTIFY_OK to NOTIFY_DONE in task_notify_func.
3D: MGS-1851 fix the integer id resource leak
3D: MGS-1845 refine es11 extension
3D: MGS-1717 display no output when use gplay to do loopback test
Compiler: MGS-1948 Fix UBO in shader can not support by new bsp release.
2D-VG: MGS-2154 VG kernel driver Allocate and Free wrong memory type
2D-VG: MGS-2089 fix gc355 vg freeze with interrupt signal
2D-VG: MGS-2084 fix vg pbuffer memory leak
2D-VG: MGS-1756 Portability issue: OpenVG includes "malloc.h" instead of
"stdlib.h" for malloc() function
2D: MA-8378 Refine g2d and gpu helper functions.
2D: MGS-1847 fix G2D build broken with g2dBUILD_FOR_VIVANTE=1
General: MGS-2243 Fix high impact Coverity issue in GPU kernel driver
General: MGS-2233 fix gpu axi bus error with process kill operations
General: MGS-2188 Fix misleading indents causing errors in gcc6
General: MGS-1624 QNX - port gmem_info tool
General: MGS-1630-1 5.0.11.p8 driver can't pass build with kernel 4.1 on
Android M6.0
This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-freescale/commit/de26bc15
This package has been tested with both X11 and Framebuffer backends:
# cd /usr/share/examples/viv_samples/vdk/
# apitrace trace --api egl ./tutorial7
# gmem_info
... display memory use per PID ...
# apitrace replay tutorial7.trace
# eglretrace tutorial7.trace
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Changelog:
Coverity fixes for resources leaks, null dereference, string overflows
and checking return.
This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-freescale/commit/b138b5b0
Implicitly tested through gstreamer as the plugins rely on it:
# gst-launch-1.0 playbin uri=file:///root/tears_of_steel_1080p.webm
# gst-launch-1.0 filesrc location=/root/tears_of_steel_1080p.webm ! \
matroskademux ! imxvpudec ! imxipuvideosink
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
base64_encode is already defined in gnutls so rename it as
motion_base64_encode to prevent a definition clash when linking
statically with gnutls
Fixes:
- http://autobuild.buildroot.org/results/592672b8826f4c731c50d29725da964d876573c4
Signed-off-by: Fabrice Fontaine <fabrice.fontaine@orange.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes vdr compile error:
http://autobuild.buildroot.net/results/725/7252decffe29e19051eed0554786651aee216573/
Instead of fixing fribidi.pc or adding optional CFLAGS to the vdr
package we remove the optional libglib dependency because it does not
contain "any thing substantial" as pointed out in an pull request sent
upstream: https://github.com/behdad/fribidi/pull/14
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
