Commit c4e6d5c8be ("core: implement
per-package SDK and target") had a mistake on the regexp that is used
to match $(PER_PACKAGE_DIR)/<something>/, and due to this, the regexp
was never matched.
The + sign in [^/]+ which was suggested by Yann E. Morin during the
review of the per-package patch series (instead of [^/]*) needs to be
escaped to be taken into account correctly. Without this, the regexp
doesn't match, and the replacement is not done, causing:
(1) For the libtool fixup in pkg-generic.mk, the lack of replacement
causes libtool .la files to not be tweaked as expected, which it
turn causes build failures reported by the autobuilder.
(2) For the fix-rpath, the RPATH of host binaries in the SDK were not
correct.
Interestingly, we have the same regexp in
support/scripts/check-host-rpath, but here the + sign does not need to
be escaped.
Fixes:
http://autobuild.buildroot.net/results/d4d996f3923699e266afd40cc7180de0f7257d99/ (libsvg-cairo)
http://autobuild.buildroot.net/results/56330f86872f67a2ce328e09b4c7b12aa835a432/ (bind)
http://autobuild.buildroot.net/results/9e0fc42d2c9f856b92954b08019b83ce668ef289/ (ibrcommon)
and probably a number of other similar issues
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit implements the core of the move to per-package SDK and
target directories. The main idea is that instead of having a global
output/host and output/target in which all packages install files, we
switch to per-package host and target directories, that only contain
their explicit dependencies.
There are two main benefits:
- Packages will now see only the dependencies they explicitly list in
their <pkg>_DEPENDENCIES variable, and the recursive dependencies
thereof.
- We can support top-level parallel build properly, because a package
only "sees" its own host directory and target directory, isolated
from the build of other packages that can happen in parallel.
It works as follows:
- A new output/per-package/ directory is created, which will contain
one sub-directory per package, and inside it, a "host" directory
and a "target" directory:
output/per-package/busybox/target
output/per-package/busybox/host
output/per-package/host-fakeroot/target
output/per-package/host-fakeroot/host
This output/per-package/ directory is PER_PACKAGE_DIR.
- The global TARGET_DIR and HOST_DIR variable now automatically point
to the per-package directory when PKG is defined. So whenever a
package references $(HOST_DIR) or $(TARGET_DIR) in its build
process, it effectively references the per-package host/target
directories. Note that STAGING_DIR is a sub-dir of HOST_DIR, so it
is handled as well.
- Of course, packages have dependencies, so those dependencies must
be installed in the per-package host and target directories. To do
so, we simply rsync (using hard links to save space and time) the
host and target directories of the direct dependencies of the
package to the current package host and target directories.
We only need to take care of direct dependencies (and not
recursively all dependencies), because we accumulate into those
per-package host and target directories the files installed by the
dependencies. Note that this only works because we make the
assumption that one package does *not* overwrite files installed by
another package.
This is done for "extract dependencies" at the beginning of the
extract step, and for "normal dependencies" at the beginning of the
configure step.
This is basically enough to make per-package SDK and target work. The
only gotcha is that at the end of the build, output/target and
output/host are empty, which means that:
- The filesystem image creation code cannot work.
- We don't have a SDK to build code outside of Buildroot.
In order to fix this, this commit extends the target-finalize step so
that it starts by populating output/target and output/host by
rsync-ing into them the target and host directories of all packages
listed in the $(PACKAGES) variable. It is necessary to do this
sequentially in the target-finalize step and not in each
package. Doing it in package installation means that it can be done in
parallel. In that case, there is a chance that two rsyncs are creating
the same hardlink or directory at the same time, which makes one of
them fail.
This change to per-package directories has an impact on the RPATH
built into the host binaries, as those RPATH now point to various
per-package host directories, and no longer to the global host
directory. We do not try to rewrite such RPATHs during the build as
having such RPATHs is perfectly fine, but we still need to handle two
fallouts from this change:
- The check-host-rpath script, which verifies at the end of each
package installation that it has the appropriate RPATH, is modified
to understand that a RPATH to $(PER_PACKAGE_DIR)/<pkg>/host/lib is
a correct RPAT.
- The fix-rpath script, which mungles the RPATH mainly for the SDK
preparation, is modified to rewrite the RPATH to not point to
per-package directories. Indeed the patchelf --make-rpath-relative
call only works if the RPATH points to the ROOTDIR passed as
argument, and this ROOTDIR is the global host directory. Rewriting
the RPATH to not point to per-package host directories prior to
this is an easy solution to this issue.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
genimage makes a full copy of the given rootpath to ${GENIMAGE_TMP}/root
so passing TARGET_DIR would be a waste of time and disk space. We don't
rely on genimage to build the rootfs image, just to insert a pre-built
one in the disk image.
Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Back a few years ago, when we were starting to think about top-level
parallel build, we were not sure how to deal with packages that
installed the same files, so we wanted to catch the situation to assess
how prevalent that was, before we decided what to do and how to address
it.
However, the trend nowadays is that packages will install in a
per-package target/ (and staging/ and host/), and the final directories
will be assembled in a reproducible (alphabetical) order, so if two
packages install the same file, the last one will win (as is currently
the case).
Besides, check-uniq-files reports loads of spurious errors when packages
get reinstalled (e.g. during development).
Finally, check-uniq-files is the only script called during the build,
that is written in python.
So, get rid of check-uniq-files.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When selected, host-ccache is a dependency of almost all packages.
As such, it clutters the dependency graph uselessly.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Reviewed-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The POSIX specification defines a 'trap <action> EXIT' mechanism that is
useful to perform clean-up actions in shell scripts. A trap has two main
advantages over hand-crafted clean-up mechanisms:
- It runs even if the process is terminated by a SIGTERM.
- It runs even if the script stops due to a pipeline failure (set -e).
Now we can make the script to stop immediately if a compilation error
occurs, instead of letting it try to run an unexisting program.
This change may appear to be overkill but Buildroot is an open source
project and each piece of code is a potential learning tool for other
developments. We must strive to provide good examples.
Signed-off-by: Carlos Santos <unixmania@gmail.com>
Acked-by: Yann E. MORIN <yann.morin@orange.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Some installations mount /tmp with the 'noexec' option, which prevents
running the program generated there to check the kernel headers.
Avoid the problem by generating the program under $(BUILD_DIR), passed
as the first argument to check-kernel-headers.sh.
We could globally export a TMPDIR environment variable with some path
under $(BUILD_DIR) but such solution would be too intrusive, depriving
the user from the freedom to set TMPDIR at his will (or needs).
Fixes: https://bugs.busybox.net/show_bug.cgi?id=12241
Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
As suggested by Baruch Siach, using "git rev-parse HEAD" is a lot
simpler than playing around with "git log" to just retrieve the commit
id corresponding to the current HEAD.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
pkg-stats extracts the Buildroot commit id from which the package
information was collected. However, when doing so, it always assumes
we're using the master branch, by running "git log master".
But in fact, pkg-stats can be run from any branch/tag, so it makes a
lot more sense to use "git log HEAD".
Cc: victor.huesca@bootlin.com
Cc: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Now that we can order packages from biggest to smallest, it makes sense
to assign the most aggressive colours to the biggest packages.
As such, reorder the current colours so that we have, in order:
- red-ish
- orange-ish
- yellow-ish
- purple-ish
- eggplant-ish (is that even a colour? :-] )
- some-indeterminate-blue-ish
- dark-green-ish
- light-green-ish
For the previous, smallest-first ordering, it does not matter much what
the ordering is: the actual colours are still somewhat-unpredictably
assigned to packages, depending on the cut-off limit...
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Currently, the packages are sorted smallest first, and biggest last
(with unknown and others second-to-last and last, resp.).
Add an option to invert the ordering (but keeping unknown and others at
their current positions).
This has the nice side effect that we can now control the colours
assigned to the biggest package(s), as the colours are cycled from the
first to the last. Currently, the biggest packages gets a redish colour,
which is appropriate, but the second gets a greenish one, which is not
as appropriate (but changing that can come later).
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
When dealing with embedded devices, storage is more often than not some
kind of flash device, on which the memory is usually counted as powers
of 1024 instead of powers of 1000. As such, people may prefer reports
using IEC prefixes [0] instead of the SI prefixes.
Add an option to that effect.
We use argparse's ability to use custom actions [1] [2], to provide a
set of options that act on a boolean, but has a single help entry and
internally ensures consistency of the settings. We could have been using
the more conventional store_true/store_false actions instead, but that
would have meant either two help entries, one for each set of options,
and/or some logic after parse_args() to check the validity of the
settings.
[0] https://en.wikipedia.org/wiki/Binary_prefix
[1] https://docs.python.org/2/library/argparse.html#action
[2] https://docs.python.org/2/library/argparse.html#argparse.Action
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Currently, we group packages that contribute less then 1%, into the
"Other" category.
However, in some cases, there can be a lot of very comparatively small
packages, and they may not exceed this limit, and so only the "Others"
category would be displayed, which is not nice.
Conversely, if there are a lot of packages, most of which only so
slightly exceeding this limit, then we get all of them in the graph,
which is not nice either.
Add a way for the developers to pass a different cut-off limit. As for
the dependency graph which has BR2_GRAPH_DEPS_OPTS, add the environment
variable BR2_GRAPH_SIZE_OPTS to carry those extra option (in preparation
for more to come, later).
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
[Arnout:
- remove empty base class definition from Config;
- use parser.error instead of ValueError for invalid argument.]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Currently, we forcibly report sizes in multiple of Kilobytes. In some
big configurations, the sizes of the system as a whole, as well as that
of individual packages, may exceed megabytes, and when some artistic
assets get used, even the gigabyte may get exceed.
These big sizes are not easy to read when expressed in kilobytes.
Additionally, some very small packages might have sizes below the
kilobyte (and when we can specify the cut-off grouping size, they may
get reported), and thus the size displayed for those would be 0 kB.
Add a helper function that can format a floating-point size into a
string with all the appropriate formatting:
- there are at least 3 meaningfull digits visible, i.e. we display
"3.14" or "10.4" instead of just "3" or "10", but for big number we
don't care about too many precision either, so we report "100" or
"1000", not "100.42" or "1000.27";
- the proper SI prefix is appended, if needed.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Currently, the "unknown" category may be reported anywhere, so it does
not really stand out when there are a lot of packages in the graph.
Move it towards the end, but right before the "other" category, so that
it is a bit more visible. Like for Others, don't report it if its size
is zero.
Also, make it title case (i.e. "Unknown" instead of "unknown").
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
It is nicer overall to have a main() function, like all our other
scripts tend to have too.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
There are three E501 warnings returned by flake8, when run locally,
because we enforce a local 80-char limit, but that are not reported by
the gitlab-ci jobs because only a 132-char limit is required there.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Reviewed-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Similar to toolchains and jpeg, we now offer a way for br2-external
trees to provide their openssl implementation, which gets included in
the openssl choice.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Vadim Kochan <vadim4j@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Similar to toolchains, we now offer a way for br2-external trees to
provide their libjpeg implementation, which gets included in the jpeg
choice.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Vadim Kochan <vadim4j@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since we have a choice for the pre-configured pre-built toolchains,
there is no possbility for a br2-external to provide its own. The
only solution so far for defconfigs in br2-external trees is to use
BR2_TOOLCHAIN_EXTERNAL_CUSTOM and define all the bits by itself...
This is not so convemient, so offer a way for br2-external trees to
provide such pre-configured toolchains.
To allow for this, we now scan each br2-external tree and look for a
specific file, provides.toolchains.in. We generate a kconfig file that
sources each such file, and that generated file is sourced from within
the toolchain choice, thus making the toolchains from a br2-external
tree possible and available in the same location as the ones known to
Buildroot:
Toolchain --->
Toolchain type (External toolchain) --->
Toolchain --->
(X) Arm ARM 2019.03
( ) Linaro ARM 2018.05
( ) Custom toolchain
*** Toolchains from my-br2-ext-tree: ***
( ) My custom ARM toolchain
*** Toolchains from another-br2-ext-tree: ***
( ) Another custom ARM toolchain
( ) A third custom ARM toolchain
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Vadim Kochan <vadim4j@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, the kconfig part contains two things: the kconfig option
with the paths to br2-external trees, and the kconfig menus for the
br2-external trees.
When we want to include more kconfig files from the br2-external tree
(e.g. to get definitions for pre-built toolchains), we will need to
have the paths defined earlier, so they can be used from the br2-external
tree to include files earlier than the existing menus.
Split the generated kconfig file in two: one to define the paths, which
gets included early in our main Config.in, and one to actually define
the existing menus, which still gets included at the same place they
currently are.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Vadim Kochan <vadim4j@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We currently redirect the output of each helper function. This was nice
as long as we were generating single .mk and .in fragments.
But we are soon to need more .in fragments.
So, do the redirection inside the .in helpers.
We do not (currently) need to generate more than one .mk fragment, but
for consistency, do the redirection in the .mk helper too.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Vadim Kochan <vadim4j@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When we introduced support for multiple br2-external trees, we
introduced two files, one on the Makefile side, needed very early,
and one on the kconfig side, needed later in the configuration
process. We naturally introduced a two-step generation, as it looked
like the simplest and most obvious way.
But now, we are on the verge of generating more files on the kconfig
side, and it does not make sense to add even more steps to generate
them.
And even better yet, we can generate both the Makefile-side and
kconfig-side files at the same time, in fact.
Make it so.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Vadim Kochan <vadim4j@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We do not usually provide help for our internal scripts. Besides, such
help has a tendency to bitrot pretty quickly anyway.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Vadim Kochan <vadim4j@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit b14b02698 (core/br2-external: restore compatibility with old
distros) switched to using 'eval' to emulate associative arrays, for
those distros too old to have bash-4+.
In so doing, it forgot to declare the new local variables in the
respective helper functions.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Vadim Kochan <vadim4j@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The major bottleneck in pkg-stats is the time spent waiting for
answers from remote servers. Two functions involve such communication
with remote servers:
- 'check_package_urls' which checks that each package upstream website
is up, it is efficient due to the use of process-pools thanks to
Matt Weber.
- 'check_package_latest_version' which fetches the latest package
version from release-monitoring, it uses a http-pool but runs
sequentially.
This patch extends the use of process-pools to 'check_latest_version'.
Due to some limitations of multiprocess callbacks, this patch loses
the overall progress of packages in favour of just the current package
name.
Runtimes for this function are ~3m vs ~25m for the linear version.
Tested on an i7 7500U (2/4 cores/threads @3.5GHz) with 15ms ping.
Note: There have already been work trying to parallelize this function
using threads but there were a failure on some configurations [1].
This implementation rely on a dedicated module already in use on this
script, so it's unlikely to see failure with this version.
[1] http://lists.busybox.net/pipermail/buildroot/2018-March/215368.html
Signed-off-by: Victor Huesca <victor.huesca@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes:
- blank space before ':'
- unused 'o' variable left from a previous patch
- bad continuous alignment
Signed-off-by: Victor Huesca <victor.huesca@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The pkg-stats calls 3 times `make` to get a bunch of variables. These
variables can be obtained in only one make invocation. This patch
replaces the three calls by just one and adjusts the parsing logic
accordingly.
Note: another option suggested by Arnout would be to run `make
show-info` that produces a json with the necessary variables. This
would avoid the duplicated effort done in pkg-stats and pkg-utils and
allow to add other infos to pkg-stats like dependencies, reversed
dependencies or if the package is virtual.
In order to use this method, the following changes are required in
pkg-generic's show-info:
- include license_files;
- have an option to run it on *all* packages, not just the selected
ones.
This patch take the simplest approach of only factorizing the make
calls as it requires less changes.
Signed-off-by: Victor Huesca <victor.huesca@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since it's used only for the HTML output, and all other functions used
for HTML output are prefixed by dump_html, let's do so for
dump_gen_info() as well by renaming it to dump_html_gen_info().
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The 'dump_html' and 'dump_json' both include commit infos as well as the
current date. It make more sense to retrieve these information once.
This patch simply does this factorization.
Signed-off-by: Victor Huesca <victor.huesca@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Pkg-stats is a great script that get a lot of interesting info from
buildroot packages. Unfortunately it is currently designed to output a
static HTML page only. While this is great to include on the
buildroot's website, the HTML is not designed to be easily parsable and
thus it is difficult to reuse it in other scripts.
This patch provide a new option to output a JSON file in addition to the
HTML one.
The old 'output' option has been renamed to 'html' to distinguish from
the new 'json' option.
Signed-off-by: Victor Huesca <victor.huesca@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Move the mutual exculsion of the '-n' and '-p' options to be part of the
parser instead of being checked in main.
Signed-off-by: Victor Huesca <victor.huesca@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
/lib/grub is already ignored, so add /usr/lib/grub to support
BR2_ROOTFS_MERGED_USR.
Signed-off-by: Alex Xu <alex_y_xu@yahoo.ca>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently, we extract the dependency graph from the aptly named but
ad-hoc show-dependency-graph rule.
We now have a better solution to report package information, with
show-info.
Since show-dependency-graph never went into a release so far, and
show-info does provide the same (and more), switch to using show-info.
Thanks to Adam for suggesting the coding style to have a readable code
that is not ugly but still pleases flake8. Thanks to Arnout for
suggesting the use of dict.get() to further simplify the code.
Note: we do not use the reverse_dependencies field because it only
contains those packages that have a kconfig option, so we'd miss most
host packages.
Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Adam Duskett <aduskett@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Previously, the flake8 script didn't help us to detect when Python
scripts were incorrectly wrapped. Now, however, it does report such
errors.
Fix one such an error now.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
[Arnout: give commit message a more positive tone]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Now that we can get the whole dependency tree from make, use it to
speed up things considerably.
So far, we had three functions to get the dependencies information:
get_depends(), get_rdepends(), and, somehow unrelated, get_version().
Because of the way %-show-{,r}depends works, getting the dependency tree
was expensive, the three functions all took a set of packages for which
to get the dependencies, in an attempt to limit the time it took to get
that tree, but we still had to call these functions iteratively, until
they returned no new dependency. This was pretty costly.
Now, getting the tree is much, much less costly, and we can get the
whole tree as cheaply as we previously got only the first-level
dependencies.
Furthermore, we can now also get the version information at the same
time, and that also brings in whether the package is virtual or not,
target or host.
So, we drop all three helper functions, and replace them with a single
one that returns all that information in one go: full dependency trees
(direct and reverse), per-package type, and per-package version.
Note: since commit 2d29fd96a (pkg-virtual: remove VERSION/SOURCE),
virtual packages are no longer reported as having a 'virtual' version,
so have since been displayed as regular packages in the graphs. Although
noone complained, this patch incidentally restores the initial
behaviour, and virtual packages are now correctly displayed as such
again.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
We we simplify the dependency graph, we try to remove so-called
mandatory dependencies from each package, and for each mandatory that
was thus removed, reattach it to the root-package of the graph.
This was made so that mandatory dependencies (which are dependencies of
all packages, or at least of a lot of packages) do not clutter the
dependency graph, but that they are still shown in the graph, as
dependencies of the root package.
However, these mandatory dependencies are only _direct_ dependencies.
As such, it does not make sense to reattach a mandatory dependency when
doing a reverse graph. Worse, it can actually be incorrect.
For example, 'skeleton' is a mandatory dependency, and as such is
removed from all packages. But when doing a reverse graph, skeleton is
now in the dependency chain of, e.g. skeleton-init-none; it should then
not be removed.
In short: the notion of mandatory dependencies does not make sense in
the case of a reverse graph.
Consequently, skip over the mandatory dependency removal when doing a
reverse graph.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When host-gzip is needed, it is a mandatory dependency of all packages.
As such, drawing the dependency lines toward host-gzip would uselessly
clutter the graph.
So, like for the skeleton, host-skeleton, and host-tar, we cut the
dependency chains toward host-gzip.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When host-tar is needed, it is a mandatory dependency of all packages.
As such, drawing the dependency lines toward host-tar would uselessly
clutter the graph.
So, like for the skeleton and host-skeleton, we cut the dependency chains
toward host-tar.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
host-skeleton is a dependency of almost all packages, except a very few.
As such, it clutters the dependency graph uselessly.
Do with it as we do for the skeleton: cut the dependency chains.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Some times, multiple dependency graphs for a set of packages (mostly
the application-level packages for the project) are included in reports
(e.g. delivery notes). Repeating the mandatory dependencies on all
those graphs is useless and clutters the important dependencies.
When we had only two such mandatory dependencies (toolchain, skeleton),
it was manageable to list them as manual exclusions:
-x toolchain -x skeleton
But we now have quite a few such dependencies, and it becomes a bit more
cumbersome to manage, not counting the ones we may add in the future.
Add an option to exclude all those mandatory dependencies, to generate
neat graphs.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The current graph-depends implementation filters out a number of
"mandatory" dependencies that all packages have: dependency on
"toolchain" and dependency on "skeleton".
Despite this filtering, in full graph dependencies, "toolchain" and
"skeleton" are still shown, because they are target packages, and
therefore appear in the result of "make show-targets". Thanks to this,
they will be visible as dependencies of the "ALL" node, which is the
root of the dependency tree.
However, as we are going to introduce host-skeleton as a "mandatory
dependency" to be filtered out, this is no longer going to work.
This commit adjusts the remove_extra_deps() function to ensure that
when a mandatory dependency is removed, this dependency exists between
the root of the dependency tree and the mandatory dependency.
This issue was noticed by Yann E. Morin, and this commit provides a
different implementation than what Yann proposed in
https://patchwork.ozlabs.org/patch/910453/.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr:
- list mandatory deps before removing them
- fix flake8 warnings
]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes the following flake8 warnings:
support/scripts/pkg-stats:34:2: W605 invalid escape sequence '\$'
support/scripts/pkg-stats:34:4: W605 invalid escape sequence '\('
support/scripts/pkg-stats:34:11: W605 invalid escape sequence '\$'
support/scripts/pkg-stats:34:13: W605 invalid escape sequence '\('
support/scripts/pkg-stats:34:32: W605 invalid escape sequence '\)'
support/scripts/pkg-stats:34:34: W605 invalid escape sequence '\)'
support/scripts/pkg-stats:35:2: W605 invalid escape sequence '\s'
support/scripts/pkg-stats:35:14: W605 invalid escape sequence '\S'
support/scripts/pkg-stats:35:17: W605 invalid escape sequence '\s'
support/scripts/pkg-stats:42:1: E302 expected 2 blank lines, found 1
support/scripts/pkg-stats:587:133: E501 line too long (157 > 132 characters)
Note that the "invalid escape sequence" errors work because Python
leaves the \ in place if it doesn't recognise the escape sequence. But
it's better practice to use a raw string for regular expressions.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Introduce support/scripts/check-merged-usr.sh, a script that check if a
given path complies to the merged /usr requirements:
/
/bin -> usr/bin
/lib -> usr/lib
/sbin -> usr/sbin
/usr/bin/
/usr/lib/
/usr/sbin/
Use this script in skeleton-custom.mk instead of a bunch of variables
filled by $(shell ...) macros. The same script will be used to check
rootfs overlays, in a forthcoming change.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This commit adds fetching the latest upstream version of each package
from release-monitoring.org.
The fetching process first tries to use the package mappings of the
"Buildroot" distribution [1]. This mapping mechanism allows to tell
release-monitoring.org what is the name of a package in a given
distribution/build-system. For example, the package xutil_util-macros
in Buildroot is named xorg-util-macros on release-monitoring.org. This
mapping can be seen in the section "Mappings" of
https://release-monitoring.org/project/15037/.
If there is no mapping, then it does a regular search, and within the
search results, looks for a package whose name matches the Buildroot
name.
Even though fetching from release-monitoring.org is a bit slow, using
multiprocessing.Pool has proven to not be reliable, with some requests
ending up with an exception. So we keep a serialized approach, but
with a single HTTPSConnectionPool() for all queries. Long term, we
hope to be able to use a database dump of release-monitoring.org
instead.
From an output point of view, the latest version column:
- Is green when the version in Buildroot matches the latest upstream
version
- Is orange when the latest upstream version is unknown because the
package was not found on release-monitoring.org
- Is red when the version in Buildroot doesn't match the latest
upstream version. Note that we are not doing anything smart here:
we are just testing if the strings are equal or not.
- The cell contains the link to the project on release-monitoring.org
if found.
- The cell indicates if the match was done using a distro mapping, or
through a regular search.
[1] https://release-monitoring.org/distro/Buildroot/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Replace all YAML anchors with the new "extends" keyword because it is
more readable and more flexible (it works across configuration files
combined with the new "include" keyword).
Readability is more meaningful in .gitlab-ci.yml.in.
In the part of .gitlab-ci.yml that is auto-generated by 'make
.gitlab-ci.yml' keep the keyword in the same line of the job name.
So instead of this:
zynqmp_zcu106_defconfig:
extends: .defconfig
tests.boot.test_atf.TestATFAllwinner:
extends: .runtime_test
Use this:
zynqmp_zcu106_defconfig: { extends: .defconfig }
tests.boot.test_atf.TestATFAllwinner: { extends: .runtime_test }
Do this to to keep .gitlab-ci.yml easier to be post-processed by a
script.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
setlocalversion will use 'hg id' to determine whether or not the current
revision is tagged. If there is no tag, the Mercurial revision is printed,
otherwise nothing is printed.
The problem is that the user may have custom configuration settings (in
their ~/.hgrc file or similar) that changes the output of 'hg id' in a way
that the script does not expect. In such cases, the Mercurial revision may
not be printed or printed incorrectly.
It is good practice to ignore the user environment when calling Mercurial
commands from a well-defined script, by setting the environment variable
HGRCPATH to the empty string. See also 'hg help environment'.
In the particular case of Nokia, a custom extension adds dynamic tags in the
repository, i.e. tags that are stored in a file external to the repository
and only visible when the extension is active. These tags should not
influence the behavior of setlocalversion as they are not official Buildroot
tags, i.e. even if a revision is tagged, the Mercurial revision should still
be printed.
Note that this still does not solve the problem where an organization adds
_real_ tags in their Buildroot repository. For example, there might be a
moving tag 'last-validated' or tags indicating in which product release that
Buildroot revision was used. In these cases, setlocalversion will still not
behave as expected, i.e. show the Mercurial revision.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When Buildroot is stored in a Mercurial repository on a branch other than
'default' ('master' in git terms), setlocalversion (used to populate
/etc/os-release) will incorrectly think that this is a tagged version and
will NOT print out the revision hash.
This is due to the fact that the output of 'hg id' is assumed to be
"<revision> <tags-if-any>"
but when on a branch it actually is:
"<revision> (<branch>) <tags-if-any>"
To let setlocalversion receive the output it expects, explicitly ask 'hg id'
to retrieve only the revision hash and any tags, ommitting any branch
information.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The color for 'extract' is very similar to the one for 'install-images'.
Both are cyan-like.
Replace the former by a pale blue to make all colors sufficiently distinct.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Tested-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Total build time also involves download. Getting a visibility on the impact
of that step can be important for users/admins, e.g. to evaluate different
methods of BR2_PRIMARY_SITE.
Colors used are some kind of purple (primary scheme) and light orange
(alternate scheme).
Signed-off-by: Mathias De Maré <mathias.de_mare@nokia.com>
[ThomasDS: rebase and update colors to avoid confusion]
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Tested-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
As suggested by Arnout Vandecappelle, let's document the
elf_needs_rpath() and check_elf_has_rpath() functions, before we make
them a bit more complicated with per-package directory support.
Suggested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
GitLab has severe limitations imposed to triggers.
Using a variable in a regexp is not allowed:
| only:
| - /-$CI_JOB_NAME$/
| - /-\$CI_JOB_NAME$/
| - /-%CI_JOB_NAME%$/
Using the key 'variables' always lead to an AND with 'refs', so:
| only:
| refs:
| - branches
| - tags
| variables:
| - $CI_JOB_NAME == $CI_COMMIT_REF_NAME
would make the push of a tag not to trigger all jobs anymore.
Inheritance is used only for the second level of keys, so:
|.runtime_test: &runtime_test
| only:
| - tags
|tests.package.test_python_txaio.TestPythonPy2Txaio:
| <<: *runtime_test
| only:
| - /-TestPythonPy2Txaio$/
would override the entire key 'only', making the push of a tag not to
trigger all jobs anymore.
So, in order to have a trigger per job and still allow the push of a tag
to trigger all jobs (all this in a follow up patch), the regexp for each
job must be hardcoded in the .gitlab-ci.yml and also the inherited
values for key 'only' must be repeated for every job.
This is not a big issue, .gitlab-ci.yml is already automatically
generated from a template and there will be no need to hand-editing it
when jobs are added or removed.
Since the logic to generate the yaml file from the template will become
more complex, move the commands from the main Makefile to a script.
Using Python or other advanced scripting language for that script would
be the most versatile solution, but that would bring another dependency
on the host machine, pyyaml if Python is used. So every developer that
needs to run 'make .gitlab-ci.yml' and also the docker image used in the
GitLab pipelines would need to have pyyaml pre-installed.
Instead of adding the mentioned dependency, keep using a bash script.
While moving the commands to the script:
- mimic the behavior of the previous make target and fail on any
command that fails, by using 'set -e';
- break the original lines in one command per line, making the diff for
any patch to be applied to this file to look nicer;
- keep the script as simple as possible, without functions, just a
script that executes from the top to bottom;
- do not perform validations on the input parameters, any command that
fails already makes the script to fail;
- do not add an usage message, the script is not intended to be called
directly.
This patch does not change functionality.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
[Thomas: make the script output on stdout rather than take the output
file name as second argument.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This array will be re-used in another function in a follow-up commit,
so it makes sense to factor it out.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The remove_extra_deps() function removes dependencies that we are not
interested in seeing in the dependency graph. It does this for all
packages, except the 'all' package, which on full dependency graphs is
the root of the tree.
However, this doesn't take into account package-specific dependency
graphs (i.e make <pkg>-graph-depends) where the root is not 'all', but
'<pkg>'. Due to this, dependencies on "mandatory deps" were not
visible at all, i.e the toolchain package (and its dependencies) and
the skeleton package (and its dependencies) were not displayed in
package-specific dependency graphs.
To fix this, we use the existing rootpkg variable instead of
hardcoding 'all'.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently, we avoid drawing the dependencies that we call 'target
exceptions', becasue they initially were returned by 'show-targets',
when they in fact were not really packages and thus should not be on
the graph.
However, those two exceptions have no longer been reported in the output
of show-targets since we merged very old initial top-level parallel
build way back in 2014, with commit a24877586a (Makefile: add support
for top-level parallel make), where they had been converted into purely
internal rules.
4 years have passed, we can now drop those exceptions from the
graph-depends script.
This concludes the cleanup initiated three years ago with commit
0b32791f00 (graph-depends: remove absent targets from
TARGET_EXCEPTIONS).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add an option to install grub2 support tools to the target.
In the context of Buildroot, some useful target tools provided are
grub2-editenv, grub2-reboot, which provide means to manage the grub2,
environment, boot order, and others.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Inside the check_elf_has_rpath(), we check if the host binary has a
correct RPATH, which should be either an absolute path to
$(HOST_DIR)/lib, or a relative path using $ORIGIN. Those two
conditions are checked in a single statements, but as we are going to
add a third condition, let's split this up a bit:
- If we have a RPATH to $(HOST_DIR)/lib -> we're good, return 0
- If we have a RPATH to $ORIGIN/../lib -> we're good, return 0
- Otherwise, we will exit the loop, and return 1
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Graphviz' dot utility does not like nodes which names does not start
with an ^[[:alpha:]], i.e. 18xx-ti-utils would cause grievance:
Warning: syntax ambiguity - badly delimited number '18x' in line 4 [...]/graph-depends.dot splits into two tokens
Warning: syntax ambiguity - badly delimited number '18x' in line 5 [...]/graph-depends.dot splits into two tokens
Warning: syntax ambiguity - badly delimited number '18x' in line 6 [...]/graph-depends.dot splits into two tokens
Warning: syntax ambiguity - badly delimited number '18x' in line 7 [...]/graph-depends.dot splits into two tokens
Prefix nodes with an underscore to fix that.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Suppose we use Makefile wrapper and build some project out of
buildroot tree (O=...). A command like "make
busybox-all-external-deps" will output the string "uname 022 && make
..." to stdout before the usefull information. It pollutes stdout. At
the same time if we use the same command in the buildroot source-tree
then we don't get the additional output. This patch makes wrapper
silent by default. People who prefer to see more verbose output can
use V=1.
Signed-off-by: Serj Kalichev <serj.kalichev@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently, the timestamps that we keep in build-time.log use a
second-level precision. However, as we are going to introduce a new
type of graph to draw the time line of a build, this precision is
going to be insufficient, as a number of steps are so short that they
are not even one second long, and generally the rounding to the second
gives a not so great looking graph.
Therefore, we add to the timestamps the nanoseconds using the %N date
specifier. A milli-second precision would have been sufficient, but %N
is all what date(1) provides at the sub-second level.
Since this is changing the format of the build-time.log file, this
commit adjusts the support/scripts/graph-build-time script
accordingly, to account for the floating point numbers that we have as
timestamps.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Adds a pool of worker threads to accelerate connection testing.
~7.5MB and 2% CPU per thread on a Intel i5-3230M CPU @ 2.60GHz.
Runtime is ~3min in parallel vs ~15min.
CC: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Reviewed-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Adds support to check if a package has a URL and if that URL
is valid by doing a header request.
- Reports this information as part of the generated html output
The URL data is currently gathered from the URL string provided
in the Kconfig help sections for each package.
This check helps ensure the URLs are valid and can be used
for other scripting purposes as the product's home site/URL.
CPE XML generation is an example of a case that could use this
product URL as part of an automated update generation script.
CC: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
Reviewed-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When the function add_one_group is called on an existing group,
make sure the members of this group are not removed in the process of
deleting then re-adding the group.
Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas: add curly braces when referencing ${members}, as suggested by
Yann.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use Python 3 style print calls, in order to make pkg-stats Python 3
compliant.
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Reviewed-by: Ricardo Martincoski <ricardo.martincoski@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This script causes a large number of flake8 warnings, is rarely used
(but even never used), and is going to be replaced at some point by
the improved pkg-stats that will give details about the upstream
version available for all packages, not just X.org packages.
Therefore, let's drop the xorg-release script in order to silence all
those flake8 warnings:
support/scripts/xorg-release:36:1: E302 expected 2 blank lines, found 1
support/scripts/xorg-release:58:27: E201 whitespace after '{'
support/scripts/xorg-release:58:44: E203 whitespace before ':'
support/scripts/xorg-release:58:54: E202 whitespace before '}'
support/scripts/xorg-release:63:1: E305 expected 2 blank lines after class or function definition, found 1
support/scripts/xorg-release:64:15: E261 at least two spaces before inline comment
support/scripts/xorg-release:67:32: E261 at least two spaces before inline comment
support/scripts/xorg-release:86:1: E302 expected 2 blank lines, found 1
support/scripts/xorg-release:95:1: E302 expected 2 blank lines, found 1
support/scripts/xorg-release:107:1: E302 expected 2 blank lines, found 1
support/scripts/xorg-release:115:20: W601 .has_key() is deprecated, use 'in'
support/scripts/xorg-release:123:34: E201 whitespace after '{'
support/scripts/xorg-release:124:46: E203 whitespace before ':'
support/scripts/xorg-release:124:50: E202 whitespace before '}'
support/scripts/xorg-release:127:1: E302 expected 2 blank lines, found 1
support/scripts/xorg-release:141:15: W601 .has_key() is deprecated, use 'in'
support/scripts/xorg-release:146:21: W601 .has_key() is deprecated, use 'in'
support/scripts/xorg-release:176:1: E305 expected 2 blank lines after class or function definition, found 1
support/scripts/xorg-release:180:1: W391 blank line at end of file
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Tested-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since commit 5563a1c6a4
("support/check-uniq-files: support weird locales and filenames"), the
'csv' Python module is no longer used by the check-uniq-files.
Due to this, flake8 complains with:
support/scripts/check-uniq-files:4:1: F401 'csv' imported but unused
Fix this by dropping the useless csv import.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The /lib/firmware directory contains random firmware for various
devices. It happens that some of them might be or appear to be ELF
files, but they shouldn't be checked by fix-rpath. For example, one of
the Qualcomm VPU firmware file appears to be an ELF file, but patchelf
isn't happy about it:
$ ./output/host/bin/patchelf --print-rpath output/target/lib/firmware/qcom/venus-4.2/venus.b00
patchelf: patchelf.cc:387: void ElfFile<Elf_Ehdr, Elf_Phdr, Elf_Shdr, Elf_Addr, Elf_Off, Elf_Dyn, Elf_Sym>::parse() [with Elf_Ehdr = Elf32_Ehdr; Elf_Phdr = Elf32_Phdr; Elf_Shdr = Elf32_Shdr; Elf_Addr = unsigned int; Elf_Off = unsigned int; Elf_Dyn = Elf32_Dyn; Elf_Sym = Elf32_Sym]: Assertion `shstrtabIndex < shdrs.size()' failed.
Aborted (core dumped)
Even though patchelf definitely shouldn't crash, it anyway doesn't
make sense to check ELF files in /lib/firmware, so let's exclude this
directory from our check.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit adds a new column in the HTML output containing the
current version of a package in Buildroot. As such, it isn't terribly
useful, but combined with the latest upstream version added in a
follow-up commit, it will become very useful.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit adds the following options to the pkg-stats-new script:
-n, to specify a number of packages to parse instead of all packages
-p, to specify a list of packages (comma-separated) to parse instead
of all packages
These options are basically only useful when debugging/developing
this script, but they are very useful, because the script is rather
slow to run completely with all 2000+ packages, especially once
upstream versions will be fetched from release-monitoring.org.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit adds a new version of the pkg-stats script, rewritten in
Python. It is for now implemented in a separate file called,
pkg-stats-new, in order to make the diff easily readable. A future
commit will rename it to pkg-stats.
Compared to the existing shell-based pkg-stats script, the
functionality and output is basically the same. The main difference is
that the output no longer goes to stdout, but to the file passed as
argument using the -o option. This allows stdout to be used for more
debugging related information.
The way the script works is that a first function get_pkglist()
returns a list of Package objects. Then, the function
package_init_make_info() uses 'make printvars' to gather information
about all packages, stored as class variables in the Package
class. Then, we iterate over all packages, and use various methods of
the Package class to retrieve all details about the package:
infrastructure, presence of hash file, presence of license
information, etc.
calculate_stats() then calculates global statistics (how packages have
license information, how packages have a hash file, etc.). Finally,
dump_html() produces the HTML output, using a number of sub-functions.
One improvement over the shell-based version is that we can use
regexps to exclude some .mk files. Thanks to this, we can exclude all
linux-ext-*.mk files, avoiding incorrect matches.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
graph-depends currently spits out a graph in .dot format. However, as
part of the upcoming introduction of <pkg>-show-recursive-depends and
<pkg>-show-recursive-rdepends, we need graph-depends to be able to
display a flat list.
Signed-off-by: George Redivo <george.redivo@datacom.ind.br>
[Thomas:
- Rebase on top of graph-depends changes
- Do not display the package name itself in the list, only its
dependencies (or reverse dependencies)
- Display the result on a single line, instead of one package per
line, in order to match what <pkg>-show-depends and
<pkg>-show-rdepends are doing today.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This will be useful for the upcoming recursive show-depends and
show-rdepends features.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Instead of hardcoded sys.stderr.write() calls. No functional change, but
allows us to easily implement a quiet option.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The graph-depends was not very consistent in colors vs. colours: some
parts were using colours, some parts were using colors.
Let's settle on the US spelling, colors.
This change the user-visble option --colours to --colors, but it is
unlikely that a lot of users customize the colors through
BR2_GRAPH_DEPS_OPTS, so this user interface change is considered
reasonable.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The graph-depends script had no main() function, and the main code was
actually spread between the function definitions, which was a real
mess.
This commit moves the global code into a main() function, which allows
to more easily follow the flow of the script. The argument parsing
code is moved into a parse_args() function.
Most of the global variables are removed, and are instead passed as
argument when appropriate. This has the side-effect that the
print_pkg_deps() function takes a lot of argument, but this is
considered better than tons of global variables.
The global variables that are removed are: max_depth, transitive,
mode, root_colour, target_colour, host_colour, outfile, dict_deps,
dict_version, stop_list, exclude_list, arrow_dir.
The root_colour/target_colour/host_colour variables are entirely
removed, and instead a single colours array is passed, and it's the
function using the colors that actually uses the different entries in
the array.
The way the print_attrs() function determines if we're display the
root node is not is changed. Instead of relying on the package name
and the mode (which requires passing the root package name, and the
mode), it relies on the depth: when the depth is 0, we're at the root
node.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, when a filename contains characters not representable in the
user's locale, we fail hard, especially when the host python is python3.
This is because python2 and python3 handle encoding/decoding strings
differently, with python3 presumable doing the right thing, but it
breaks on some systems, while python2 presumable does the wrong thing,
but it works everywhere. (Just joking, obviously...)
Part of the issue being that the csv reader in python2 is broken with
UTF8.
We fix the issue by ditching the csv reader, and simply read the file in
binary mode, manually partitioning the lines on the first comma.
Then, we use the binary-encoded (really, un-encoded) package names and
filenames as values and keys, respectively.
Finally, for each filename or package we need to print, we try to decode
them with the defaults for the user settings, but catch any decoding
exception and fall back to dumping the raw, binary values. Which codec
is used by default differs between Python version, but in all cases
something sane is printed at least.
Thanks a lot to Arnout for the live help doing this patch. :-)
Reported-by: Jaap Crezee <jaap@jcz.nl>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Jaap Crezee <jaap@jcz.nl>
[Arnout: commit log improvement]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
When using a merged /usr, the kernel module path is really
/usr/lib/modules, as /lib is a symlink to usr/lib .
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some packages (mostly, out-of-tree) may want to install binary blobs for
another architecture, outside the locations we currently exclude, like
in /opt or whatever...
Add support in check-bin-arch to accept any arbitrary location, that
individual package can each request to excude from the check, when they
are installed.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Using {} in format strings is only supported in sufficiently recent
Python versions. Python 2.6 doesn't support this, and only format
strings with numbered arguments: {0}, {1}, etc.
Python 2.7:
$ python -c 'print("foo {}".format(12))'
foo 12
$ python -c 'print("foo {0}".format(12))'
foo 12
Python 2.6:
$ python -c 'print("foo {}".format(12))'
Traceback (most recent call last):
File "<string>", line 1, in <module>
ValueError: zero length field name in format
$ python -c 'print("foo {0}".format(12))'
foo 12
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The script check-bin-arch fails as follows on a config for PowerPC e6500
(64-bit CPU) with BR2_ARCH="powerpc" (32-bit userland desired):
ERROR: architecture for "/lib/modules/..../lib/libcrc32c.ko"
is "PowerPC64", should be "PowerPC"
This situation is perfectly acceptable: the kernel is 64-bit and so are its
modules, even though userland is 32-bit.
To keep check-bin-arch and its caller simple, just skip /lib/modules/
entirely, like is done for /lib/firmware and some others.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix these warnings:
E302 expected 2 blank lines, found 1
E305 expected 2 blank lines after class or function definition, found 1
E713 test for membership should be 'not in'
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fix these warnings:
E302 expected 2 blank lines, found 1
E305 expected 2 blank lines after class or function definition, found 1
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fix these warnings:
E201 whitespace after '['
E202 whitespace before ']'
E302 expected 2 blank lines, found 1
E305 expected 2 blank lines after class or function definition, found 1
Ignore these warnings:
E402 module level import not at top of file
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fix these warnings:
E128 continuation line under-indented for visual indent
E302 expected 2 blank lines, found 1
E305 expected 2 blank lines after class or function definition, found 1
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fix these warnings:
E122 continuation line missing indentation or outdented
E127 continuation line over-indented for visual indent
E128 continuation line under-indented for visual indent
E202 whitespace before ']'
E221 multiple spaces before operator
E225 missing whitespace around operator
E231 missing whitespace after ','
E302 expected 2 blank lines, found 1
E305 expected 2 blank lines after class or function definition, found 1
E502 the backslash is redundant between brackets
E713 test for membership should be 'not in'
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Make sure that the pie charts produced by 'graph-build' and 'graph-size'
targets are sorted on the size of each piece of the pie. Otherwise, making
visual analysis is difficult, as one needs to look at the legends of each
piece and do the sorting manually in their head.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This merges the next branch accumulated during the 2017.11 release
cycle back into the master branch.
A few conflicts had to be resolved:
- In the DEVELOPERS file, because Fabrice Fontaine was added as a
developer for libupnp in master, and for libupnp18 in
next. Resolution is simple: add him for both.
- linux/Config.in, because we updated the 4.13.x release used by
default in master, while we moved to 4.14 in next. Resolution: use
4.14.
- package/libupnp/libupnp.hash: a hash for the license file was added
in master, while the package was bumped into next. Resolution: keep
the hash for the license file, and keep the hash for the newest
version of libupnp.
- package/linux-headers/Config.in.host: default version of the kernel
headers for 4.13 was bumped to the latest 4.13.x in master, but was
changed to 4.14 in next. Resolution: use 4.14.
- package/samba4/: samba was bumped to 4.6.11 in master for security
reasons, but was bumped to 4.7.3 in next. Resolution: keep 4.7.3.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some packages (ex: skeleton-init-systemd) have a zero size so we cannot
divide by the package size. In that case make their percent zero
explicitly and avoid a ZeroDivisionError exception.
Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, we do nothing about packages that touch the same file: given
a specific configuration, the result is reproducible (even though it
might not be what the user expected) because the build order is
guaranteed.
However, when we later introduce top-level parallel build, we will no
longer be able to guarantee a build order, by the mere way of it being
parallel. Reconciliating all those modified files will be impossible to
do automatically. The only way will be to refuse such situations.
As a preliminary step, introduce a helper script that detects files that
are being moified by two or more packages, and reports them and the
impacted packages, at the end of the build.
The list being reported at the end of the build will make it prominently
visible in autobuilder results, so we can assess the problem, if any.
Later on, calling that helper script can be done right after the package
installation step, to bail out early.
Thanks Arnout for the pythonist way to write default dictionaries! ;-)
Note: doing it in python rather than a shell script is impressively
faster: where the shell script takes ~1.2s on a minimalist build, the
python script only takes ~0.015s, that is about 80 times faster.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Baruch Siach <baruch@tkos.co.il>
Cc: Peter Seiderer <ps.report@gmx.net>
[Thomas: rename script without .py extension.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We sanity-check the host executables that they have a correct RPATH
pointing to the host libraries.
This is currently done by looking for all files in $(HOST_DIR) that
match the 'ELF executable' pattern (a bit more complex, but that's
idea).
However, when an executable is built with -fPIE of -fpie, it no longer
appears to be an 'ELF executable', but it rather looks like an 'ELF
sheard object' (like if it were an library.
So, we miss those files.
It turns out that the problem is a real one, because quite a few
mainline distros, expecially those based on Debian for example, have
already switched to generating PIE code by default, and thus we miss on
a whole class of systems..
We fix that by simply looking if we can find an ELF interpreter in each
file. If we there is one, this is an ELF executable; if not, it may be
anything else: we don't care (not even about ELF libraries).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Patches with renames apply properly with patch >= 2.7, but not with
older patch versions. Since "git format-patch" by default generates
patches with renames, Buildroot developers often don't realize that
their patches will not apply properly on build machines that have
patch < 2.7. In order to prevent such a situation from happening
again, this commit adds some logic in apply-patches.sh to refuse
applying patches that contain renames.
Note that just searching for '^rename' is not sufficient, since the
patch commit message may contain the words "rename from" or "rename to"
as well. Therefore, the grep expression is made as accurate as possible,
checking both.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Arnout: spaces instead of tabs (suggested by Yann);
extend commit message.]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Commit c96b8675ea
("support/scripts/check-bin-arch: ignore symbolic links") was bogus,
because it tested ${f}, which is the relative path of the file inside
${TARGET_DIR}, so we end up testing if ${f} on the system is a
symbolic link.
This commit fixes that by testing ${TARGET_DIR}/${f}.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since commit da32b49f00
("instrumentation: extend packages-file-list.txt with symlinks and
directories"), the packages-file-list.txt also contains symbolic
links. Therefore, check-bin-arch is now also checking symbolic links.
However, symbolic links in $(TARGET_DIR) can have absolute path as
targets, such as:
$ ls -l output/target/sbin/ifdown
lrwxrwxrwx 1 thomas thomas 10 Sep 3 15:55 output/target/sbin/ifdown -> /sbin/ifup
Therefore, we are now potentially checking a host binary, which
obviously makes check-bin-arch fail.
This commit changes check-bin-arch to ignore symbolic links. Indeed,
we have two cases:
- The symbolic link really points to something that will in the
rootfs (such as /sbin/ifup above). In this case, /sbin/ifup will be
checked separately by check-bin-arch.
- The symbolic link doesn't point to something that will be in the
rootfs, and that is not a problem from the perspective of
check-bin-arch, which checks the architecture of target binaries.
Fixes:
http://autobuild.buildroot.net/results/16d384a0183d477646ac7692feb65f00dde7d068/
(vim)
http://autobuild.buildroot.net/results/50429c0f63a8befff9e20899327b9a8d754d99be/
(ifupdown)
http://autobuild.buildroot.net/results/1db65973e782bfa61abcbccd3501bfd235f77288/
(gawk)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit introduces the script "fix-rpath" able to scan a tree,
detect ELF files, check their RPATH and fix it in a proper way.
The RPATH fixup is done by the patchelf utility using the option
"--make-rpath-relative <root-directory>".
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This file is not a package per-se, it includes other .mk files that
are packages.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The waf package infrastructure was not known by the pkg-stats script,
so let's add it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With 2000+ packages it's not trivial to identify i.e.:
- all packages that don't have a hash file;
- all packages that have patches;
- all packages that have code style warnings;
User experience can be improved by dynamically sorting the resulting
table.
There is an open-source solution that does that in the client-side and
requires minimal changes to our script: sorttable.js. The script is
MIT licensed as stated in its website.
Also add a hint to the user that the table can be sorted.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now all packages have been updated to install things in $(HOST_DIR)/lib
instead of $(HOST_DIR)/usr/lib, there should no longer be any reason
to have $(HOST_DIR)/usr/lib in the RPATH, so we don't allow it any more.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since $(HOST_DIR)/usr/{bin,sbin} are now symlinks to
$(HOST_DIR)/{bin,sbin}, it makes no sense to check them - they are
already covered.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is a step towards eliminating $(HOST_DIR)/usr. It allows us to
convert all packages installing things into $(HOST_DIR)/usr/lib without
affecting the rest.
To allow compatibility with packages that still use $(HOST_DIR)/usr as
the prefix, create a symlink from usr/lib to ../lib.
Note that the symlink creation will break when $(HOST_DIR)/usr/lib
already exists as a directory, i.e. when rebuilding in an existing
output directory. This is necessary: if we don't break it now, the
following commits (which remove the usr part from various variables)
_will_ break it.
At the same time as creating this symlink, we also have to update the
check-host-rpath script to accept both $(HOST_DIR)/usr/lib and
$(HOST_DIR)/lib, because depending on how the package derives the
path, it may be different.
Since there are some dependency chains that involve $(STAGING_DIR),
$(STAGING_DIR) may in fact be created before $(HOST_DIR). Since
$(STAGING_DIR) is a subdirectory of $(HOST_DIR), it is possible that the
newly added rule for $(HOST_DIR) never triggers. To make sure that the
rule does trigger, add an order-only dependency from $(STAGING_DIR) to
$(HOST_DIR).
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
By default, cut prints the entire line if the specified delimiter is not
present at all:
$ printf "foo bar" | cut -d' ' -f2
bar
$ printf "foobar" | cut -d' ' -f2
foobar
In setlocalversion, cut is presented with the output of 'hg id' which has
the format:
"<revision> <tags-if-any>"
If the current revision is not tagged, the output of 'hg id' does not
contain the delimiter (space), cut prints the entire string, and
setlocalversion thinks the version is the tag.
As setlocalversion does not print anything for tagged versions, there is no
output overall, and no correct indication of the mercurial revision.
Fix by passing the extra cut option '--only-delimited', which suppresses
output if no delimiter is found.
This problem likely went unnoticed for so long, because the tag 'tip' (i.e.
most recent revision of the branch) is treated specially: in this case the
mercurial revision _is_ printed, i.e. the situation is treated as
'untagged'.
The problem is only seen when you are _not_ at the most recent revision in
your branch.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
"$ORIGIN/../../usr/lib" is also a valid RPATH for binaries in
"$hostdir/usr/bin". After RPATH sanitation, all RPATH
directories start with "$ORIGIN".
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
After some discussion, we found out that "tools" has the four first
letters identical to the "toolchain" subfolder, which makes it a bit
unpractical with tab-completion. So, this commit renames "tools" to
"utils", which is more tab-completion-friendly.
This has been discussed with Arnout and Yann.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Move it to the top-level tools/ directory, so that it is easier to
find for users.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Move it to the top-level tools/ directory, so that it is easier to
find for users.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: "François Perrad" <francois.perrad@gadz.org>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Move it to the top-level tools/ directory, so that it is easier to
find for users.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Move it to the top-level tools/ directory, so that it is easier to
find for users.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Move it to the top-level tools/ directory, so that it is easier to
find for users.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Move it to the top-level tools/ directory, so that it is easier to
find for users.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit fixes a problem where it was not possible to replace
/etc/shadow with a symlink to a e.g. a user partition where the
shadow file is placed. This is required, e.g. for systems where the
rootfs is mounted read-only but users should still be able to be
added. Thus, if within an filesystem overlay setup a user tries
to replace /etc/shadow with a symlink to the real file on a user
partition a buildroot build stops with an error message because
sed is called on the symlink instead of following the symlink.
This commit fixes this shortcoming.
Signed-off-by: Jens Maus <mail@jens-maus.de>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The API v0 is shutdown.
see https://bugs.busybox.net/show_bug.cgi?id=9951
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When called from BR2_ROOTFS_POST_IMAGE_SCRIPT, this script
ends up with following error:
Error: Missing argument
This is because, an extra positional argument is also passed
along with BR2_ROOTFS_POST_SCRIPT_ARGS. genimage.sh didn't
have support to parse positional and optional arguments
together.
Signed-off-by: Abhimanyu Vishwakarma <Abhimanyu.V@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently the check-package script uses many files in the same
directory. This commit keeps the main script in support/scripts/ and
moves the rest into a subdirectory.
The modules were previously prefixed to make it easy to identify which
script they belong to. This is no longer needed when using a
subdirectory, so the prefix is removed.
Note: if this commit is checked out and the script is run, and later on
a previous version is checked out, the file
support/scripts/checkpackagelib/__init__.pyc needs to be manually
removed to prevent Python interpreter to look for checkpackagelib
package when only the checkpackagelib module is available.
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The toolchain name was calculated in main() for reporting to the user,
and again in build_one() for creating the build directory. Calculate
it only once, in main(), and pass the build directory as an argument
to build_one().
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This allows the page at http://autobuild.buildroot.net/stats/ to show
how many warnings returned by check-package affect each package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Warn when help text is larger than 72 columns, see [1].
Warn for wrongly indented attributes, see [1].
Warn when the convention of attributes order is not followed, see [2].
[1] http://nightly.buildroot.org/#writing-rules-config-in
[2] http://nightly.buildroot.org/#_config_files
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Check each hash entry (see [1]) and warn when:
- it does not have three fields;
- its type is unknown;
- its length does not match its type;
- the name of the file contains a directory component.
[1] http://nightly.buildroot.org/#adding-packages-hash
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Create 3 new check functions to warn when:
- there are consecutive empty lines in the file, see [1];
- the last line of the file is empty, see [2];
- there are lines with trailing whitespace, see [3].
Apply these functions to Config.*, *.mk and *.hash, but not for *.patch
files since they can contain any of these and still be valid.
[1] http://patchwork.ozlabs.org/patch/682660/
[2] http://patchwork.ozlabs.org/patch/643288/
[3] http://patchwork.ozlabs.org/patch/398984/
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Create the infra to check the style of new packages before submitting.
The overall function of the script is described inside a txt file.
It is designed to process the actual files and NOT the patch files
generated by git format-patch.
Also add the first check function, to warn if a file (Config.*, *.mk,
*.hash, *.patch) has no newline at the last line of the file, see [1].
Basic usage for simple packages:
support/scripts/check-package -vvv package/newpackage/*
Basic usage for packages with subdirs:
support/scripts/check-package -vvv $(find package/newpackage/ -type f)
See "checkpackage" in [2].
[1] http://patchwork.ozlabs.org/patch/631129/
[2] http://elinux.org/Buildroot#Todo_list
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This script is a wrapper for the genimage tool used by most boards.
The board postimage script can now call this script instead of invoking
genimage command themselves.
Signed-off-by: Etienne Phelip <etienne.phelip@savoirfairelinux.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Unextected error in the br2-external script are properly caught, but
they are not reported properly, and we end up in either of two
situations:
- the .br2-external.mk file is not generated, in which case make will
try to find a rule to generate it (because the 'include' directive
tries to generate missing files);
- the .br-external.mk file is generated but does not contain the error
variable, and thus the build might not get interrupted.
We fix that by using a trap on the pseudo ERR signal, to emit the error
variable on unexpected errors.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In commit 2f6c5e513c
("support/check-bin-arch: fix for filenames with spaces"), Yann
adjuste the check-bin-arch script to properly handle filenames with
spaces.
However, he also did a subtle change of the regexp that extracts the
path of the files. It was:
"/^${package},(.+)$/!d; s//\1/;"
and Yann changed it to:
"/^${package},\.(.+)$/!d; s//\1/;"
So the file paths used to start with a dot (like "./usr/share/foo"),
and now they no longer start with a dot (like "/usr/share/foo"). While
this modification is good and makes sense, the match for
/lib/firmware/ was not adjusted accordingly, and the follow-up patch
also ignoring /usr/share was not adjusted as well.
This commit fixes those /lib/firmware/ and /usr/share/ special cases,
which will fix:
http://autobuild.buildroot.net/results/76a1475f4cdedb80426fb022ef2e644aa5625660/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
pkgutil.py is also part of Python itself. Placing pkgutil.py as is
in a folder with other scripts that require original pkgutil will
break them. This is the case with scanpypi. So rename pkgutil.py
to brpkgutil.py to avoid naming collision.
Fixes: https://bugs.busybox.net/show_bug.cgi?id=9766
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
/usr/share normally should not contain binaries executable for the
target platform. However, it might contain ELF binaries for other
platforms, such as firmware files installed by Qemu or
pru-software-support.
Instead of special-casing each package, let's simply ignore /usr/share.
Fixes:
http://autobuild.buildroot.net/results/6f3fea9f6adaef1573fbb0dd6903b5d99e470610/
(pru-software-support)
http://autobuild.buildroot.net/results/fe8892bc22a03299fc41e30bfea5e42166838f88/
(qemu)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Filenames with spaces will break the current for loop.
Fix that by using a while-read loop, fed with the list of files on
stdin, using process substitution.
Reported-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
By default, compile_dir() relies on the modification time to know if a
python file has to be built again. However in some circumstances (when
doing reproducible builds), modification times are not reliable. Thus,
this patch adds a way to force the rebuild of all python sources.
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As shown recently by the firejail example, it is easy to miss that a
package builds and installs binaries without actually cross-compiling
them: they are built for the host architecture instead of the target
architecture.
This commit adds a small helper script, check-bin-arch, called as a
GLOBAL_INSTRUMENTATION_HOOKS at the end of the target installation of
each package, to verify that the files installed by this package have
been built for the correct architecture.
Being called as a GLOBAL_INSTRUMENTATION_HOOKS allows the build to error
out right after the installation of the faulty package, and therefore
get autobuilder error detection properly assigned to this specific
package.
Example output with the firejail package enabled, when building for an
ARM target:
ERROR: architecture for ./usr/lib/firejail/libconnect.so is Advanced Micro Devices X86-64, should be ARM
ERROR: architecture for ./usr/bin/firejail is Advanced Micro Devices X86-64, should be ARM
ERROR: architecture for ./usr/lib/firejail/libtrace.so is Advanced Micro Devices X86-64, should be ARM
ERROR: architecture for ./usr/lib/firejail/libtracelog.so is Advanced Micro Devices X86-64, should be ARM
ERROR: architecture for ./usr/lib/firejail/ftee is Advanced Micro Devices X86-64, should be ARM
ERROR: architecture for ./usr/lib/firejail/faudit is Advanced Micro Devices X86-64, should be ARM
ERROR: architecture for ./usr/bin/firemon is Advanced Micro Devices X86-64, should be ARM
ERROR: architecture for ./usr/bin/firecfg is Advanced Micro Devices X86-64, should be ARM
Many thanks to Yann E. Morin and Arnout Vandecappelle for their reviews
and suggestions.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As of the version 3.6.0 compile_dir() call will treat its 'quiet'
argument as a full blown integer rather than a boolean value and perform
integer comparison operations such as '<' or '>='.
To account for that convert ReportProblem type to be a true derivative
of built-in int() and override all of int's rich comparison operators in
order to be able to "sniff" for PyCompileError in all possible use-cases
The integer value ReportProblem pretends to be is teremined by class
variable VALUE which is set to 1.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Tested-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The LINES variable is automatically set by bash to represent the number
of lines in the terminal. That variable can be set when the shell
receives SIGWINCH.
If the shell does receive SIGWINCH after our LINES array is filled, the
content of the array is mangled.
Rename the variable to avoid that.
Fixes#9456
Reported-by: George Y. <georgebrmz@oss3d.com>
Reported-by: Paul Stewart <paulstewartis@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Requested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Use comm(1) to check that all our config options are properly set in the
resulting configuration, rather than our canned and fragile code.
Reported-by: Cam Hutchison <camh@xdna.net>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Sometimes, it interesting to have a global overview of whether the
package builds at all or not, rather than test on all toolchains.
Add an option that allows testing on a limited set of randomly choosen
toolchains.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When a build is skipped, store the lines from the config snippet, that
are missing in the resulting configuration, in a file in the build
directory, for the user to inspect.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Tested-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This script helps in testing that a package builds fine on a wide range
of architectures and toolchains: BE/LE, 32/64-bit, musl/glibc/uclibc...
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[yann.morin.1998@free.fr:
- completely rewrite the script from Thomas, with help from Luca
]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Tested-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This change adds inode tracking to the size-stats script so that hard
links don't cause files to be double counted. This has a significant
effect on the size computation for some packages. For example, git has
around a dozen hard links to a large file. Before this change, git would
weigh in at about 170 MB with the total filesystem size reported as
175 MB. The actual rootfs.ext2 size was around 16 MB. With the change,
the git package registers at 10.5 MB with a total filesystem size of
15.8 MB.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Acked-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The use of a 'rule' variable that can contain 'show-depends' or
'show-rdepends' is not logical if get_depends is considered as a reusable
function from various scripts. The name of these rules are too much an
implementation detail.
Therefore, split the existing get_depends into two separate functions
get_depends and get_rdepends, while keeping code duplication to a minimum.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Functions to obtain the version and dependencies of a package from Python
can be useful for several scripts. Extract this logic out of graph-depends
into pkgutil.py.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas: remove shebang from pkgutil.py, noticed by Yann E. Morin.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Function get_depends was recently changed to support both normal
dependencies as reverse dependencies, via a global variable 'rule' that
equals 'show-depends' or 'show-rdepends'.
As a subsequent function will extract this function get_depends to a
separate file, the use of globals is problematic.
Instead, pass the global as an argument.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes#9576
When the path to a br2-external tree is relative, make enters an endless
recursive loop (paths elided for brevity):
$ make BR2_EXTERNAL=.. foo_defconfig
make[1]: stat: ../configs/../configs/../configs[...]/toto_defconfig: Filename too long
make[1]: *** No rule to make target '../configs/../configs/../configs[...]/toto_defconfig',
needed by '../configs/../configs/../configs[...]/toto_defconfig'. Stop.
Makefile:79: recipe for target '_all' failed
make: *** [_all] Error 2
It is a bit complex to understand the actual technical reason for this
never-ending expansion; it seems it happens in the code generated by the
percent_defconfig macro. Not sure why, though...
But the root cause is the relative path.
Just use absolute, canonical paths to br2-external trees. Always.
[Peter: add bugzilla reference]
Reported-by: outtierbert@gmail.com
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Many (100+) packages supported by buildroot contain old configure
scripts (or build them from old versions of autotools) that are unable
to determine how to link shared libraries on powerpc64 and
powerpc64le. This causes that test to erroneously fail on toolchains
that are not "bi-endian" (which is the case for toolchains built by
buildroot), which causes configure to build static libraries instead
of dynamic ones. Although these builds succeed, they tend to cause
linker failures in binaries later linked against them.
Because affected configure files can be discovered automatically, this
patch introduces a hook (enabled only when building for powerpc64 and
powerpc64le) that uses a script to scan and fix each package.
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, the br2-external script uses bash-4's associative arrays.
However, some oldish enterprise-class distros like RHEL5 still use
bash-3.1 which lacks associative arrays.
We restore compatibility with those oldish distros using 'eval' to
emulate associative arrays, as suggested by Arnout.
Reported-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Python3 complains about missing parentheses.
$ ./support/scripts/get-developers
File "./support/scripts/get-developers", line 45
print f
^
SyntaxError: Missing parentheses in call to 'print'
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This adds an ev3dev Linux drivers extension that provides Linux kernel
drivers for LEGO MINDSTORMS EV3 from the ev3dev project.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that we can dump the reverse dependencies of a package, add the
ability to graph those.
It does not make sense to do a full reverse graph, as it would be
semantically equivalent to the direct graph. So we only provide a
per-package reverse graph.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Current type for 'patches' argument is str. It supposed to only
contain names of files.
If we specify FileType as type, then we don't need to open file ourself
and it allows script to read patch from standard input as well.
e.g.
$ git show -1 | ./support/scripts/get-developers -
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Output of get-developers script in our manual uses --cc for developers,
but actual output of get-developers script uses --to. This patch makes
code consistent with documentation, by using --cc for developers.
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To be noted: that link will only be valid once we have a released
manual. In the meantime, it's accessible on the nightly manual:
http://nightly.buildroot.org/#br2-external-converting
Reported-by: Benoît Allard <benoit.allard@greenbone.net>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Benoît Allard <benoit.allard@greenbone.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that we support multiple br2-external trees, BR2_EXTERNAL is no
longer exported in the environment.
This means that post-build scripts in a br2-external tree can no longer
find their own files (well, they could re-invent the path by stripping
their known-relative path, but that'd be ugly, especially since we can
very well provide it).
Export the path for each br2-external trees as environment variables.
Do so for the description as well, as a courtesy.
Also, re-order variable definitions to be more logical: first, purely
internal variables, then exported variables.
Reported-by: Benoît Allard <benoit.allard@greenbone.net>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Benoît Allard <benoit.allard@greenbone.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, we only support at most one br2-external tree. Being able
to use more than one br2-external tree can be very useful.
A use-case would be for having a br2-external to contain the basic
packages, basic board defconfigs and board files, provided by one team
responsible for the "board-bringup", while other teams consume that
br2-external as a base, and complements it each with their own set of
packages, defconfigs and extra board files.
Another use-case would be for third-parties to provide their own
Buildroot packaging in a br2-external tree, along-side the archives for
their stuff.
Finally, another use-case is to be able to add FLOSS packages in a
br2-external tree, and proprietary packages in another. This allows
to not touch the Buildroot tree at all, and still be able to get in
compliance by providing only that br2-external tree(s) that contains
FLOSS packages, leaving aside the br2-external tree(s) with the
proprietary bits.
What we do is to treat BR2_EXTERNAL as a colon-separated (space-
separated also work, and we use that internally) list of paths, on which
we iterate to construct:
- the list of all br2-external names, BR2_EXTERNAL_NAMES,
- the per-br2-external tree BR2_EXTERNAL_$(NAME) variables, which
point each to the actual location of the corresponding tree,
- the list of paths to all the external.mk files, BR2_EXTERNAL_MKS,
- the space-separated list of absolute paths to the external trees,
BR2_EXTERNAL_DIRS.
Once we have all those variables, we replace references to BR2_EXTERNAL
with either one of those.
This cascades into how we display the list of defconfigs, so that it is
easy to see what br2-external tree provides what defconfigs. As
suggested by Arnout, tweak the comment from "User-provided configs" to
"External configs", on the assumption that some br2-external trees could
be provided by vendors, so not necessarily user-provided. Ditto the menu
in Kconfig, changed from "User-provided options" to "External options".
Now, when more than one br2-external tree is used, each gets its own
sub-menu in the "User-provided options" menu. The sub-menu is labelled
with that br2-external tree's name and the sub-menu's first item is a
comment with the path to that br2-external tree.
If there's only one br2-external tree, then there is no sub-menu; there
is a single comment that contains the name and path to the br2-external
tree.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Romain Naour <romain.naour@openwide.fr>
Cc: Julien CORJON <corjon.j@ecagroup.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This unique NAME is used to construct a per br2-external tree variable,
BR2_EXTERNAL_$(NAME)_PATH, which contains the path to the br2-external
tree.
This variable is available both from Kconfig (set in the Kconfig
snippet) and from the .mk files.
Also, display the NAME and its path as a comment in the menuconfig.
This will ultimately allow us to support multiple br2-external trees at
once, with that NAME (and thus BR2_EXTERNAL_$(NAME)) uniquely defining
which br2-external tree is being used.
The obvious outcome is that BR2_EXTERNAL should now no longer be used to
refer to the files in the br2-external tree; that location is now known
from the BR2_EXTERNAL_$(NAME)_PATH variable instead. This means we no
longer need to expose, and must stop from from exposing BR2_EXTERNAL as
a Kconfig variable.
Finally, this also fixes a latent bug in the pkg-generic infra, where we
would so far always refer to BR2_EXTERNAL (even if not set) to filter
the names of packages (to decide whether they are a bootloader, a
toolchain or a simple package).
Note: since the variables in the Makefile and in Kconfig are named the
same, the one we computed early on in the Makefile will be overridden by
the one in .config when we have it. Thus, even though they are set to
the same raw value, the one from .config is quoted and, being included
later in the Makefile, will take precedence, so we just re-include the
generated Makefile fragment a third time before includeing the
br2-external's Makefiles. That's unfortunate, but there is no easy way
around that as we do want the two variables to be named the same in
Makefile and Kconfig (and we can't ask the user to un-quote that variable
himself either), hence this little dirty triple-inclusion trick.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
A br2-external tree must provide external.mk and Config.in.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, we treat the case where we have no br2-external tree
(BR2_EXTERNAL is empty) differently from the case where we do have one
(BR2_EXTERNAL is not empty).
There is now no reason to treat those two cases differently:
- the kconfig snippet is always generated appropriately (i.e. it would
include the br2-external tree if set, or include nothing otherwise);
- we no longer have a dummy br-external tree either.
Also, the Makefile code to handle BR2_EXTERNAL is currently quite
readable if at least a little bit tricky.
However, when we're going to add support for using multiple br2-external
trees simultaneously, this code would need to get much, much more complex.
To keep the Makefile (rather) simple, offload all of the handling of
BR2_EXTERNAL to the recently added br2-external helper script.
However, because of Makefiles idiosyncracies, we can't use a rule to
generate that Makefile fragment.
Instead, we use $(shell ...) to call the helper script, and include the
fragment twice: once before the $(shell ...) so we can grab a previously
defined BR2_EXTERNAL value, a second time to use the one passed on the
command line, if any.
Furthermore, we can't error out (e.g. on non-existent br2-external tree)
directly from the fragment or we'd get that error on subsequent calls,
with no chance to override it even from command line.
Instead, we use a variable in which we store the error, set it to empty
before the second inclusion, so that only the one newly generated, if
any, is taken into account.
Since we know the script will always be called from Makefile context
first, we know validation will occur in Makefile context first. So we
can assume that, if there is an error, it will be detected in Makefile
context. Consequently, if the script is called to generate the kconfig
fragment, validation has already occured, and there should be no error.
So we change the error function to generate Makefile code, so that
errors are caught as explained above.
Lastly, when the value of BR2_EXTERNAL changes, we want to 'forget'
about the previous value of the BR2_EXTERNAL_MK variable, especially in
the case where BR2_EXTERNAL is now set to empty, so that we do not try
to include it later. That's why we first generate empty version of
BR2_EXTERNAL_MK, and then assign it the new value, if any.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that we generate a kconfig snippet, we can conditionally include the
BR2_EXTERNAL's Config.in only when BR2_EXTERNAL is supplied by the user,
which means our empty/dummy Config.in is no needed.
As for external.mk, we can also include it only when BR2_EXTERNAL is
supplied by the user, which means our empty/dummy external.mk is no
longer needed.
Ditch both of those files, and:
- only generate actual content in the Kconfig snippet when we actually
do have a BR2_EXTERNAL provided by the user (i.e. BR2_EXTERNAL is not
empty);
- add a variable that contains the path to the external.mk provided by
the user, or empty if none, and include the path set in that variable
(make can 'include' nothing without any problem! ;-) )
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Romain Naour <romain.naour@openwide.fr>
Cc: Julien CORJON <corjon.j@ecagroup.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Move the inclusion of br2-external's Config.in to the generated kconfig
snippet.
This will ultimately allow us to use more than one br2-external tree.
Offload the "User-provided options" menu to the generated Kconfig
snippet. We can also move the definition of the Kconfig-version of
BR2_EXTERNAL into this snippet.
We introduce an extra check that was not present in the previous code,
to check that we do have permission on that directory. Prevciously, it
was handled as a side effect of not being able to cd into there, but it
is cleaner to check it expressly.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This script, and its companion library, is more-or-less Buildroot's
equivalent to the kernel get_maintainer.pl script: it allows to get the
list of developers to whom a set of patches should be sent to.
To do so, it first relies on a text file, named DEVELOPERS, at the root
of the Buildroot source tree (added in a followup commit) to list the
developers and the files they are interested in. The DEVELOPERS file's
format is simple:
N: Firstname Lastname <email>
F: path/to/file
F: path/to/another/file
This allows to associate developers with the files they are looking
after, be they related to a package, a defconfig, a filesystem image, a
package infrastructure, the documentation, or anything else.
When a directory is given, the tool assumes that the developer handles
all files and subdirectories in this directory. For example
"package/qt5/" can be used for the developers looking after all the Qt5
packages.
Conventional shell patterns can be used, so "package/python-*" can be
used for the developers who want to look after all packages matching
"python-*".
A few files are recognized specially:
- .mk files are parsed, and if they contain $(eval
$(<something>-package)), the developer is assumed to be looking after
the corresponding package. This way, autobuilder failures for this
package can be reported directly to this developer.
- arch/Config.in.<arch> files are recognized as "the developer is
looking after the <arch> architecture". In this case, get-developer
parses the arch/Config.in.<arch> to get the list of possible BR2_ARCH
values. This way, autobuilder failures for this package can be
reported directly to this developer.
- pkg/pkg-<infra>.mk are recognized as "the developer is looking after
the <infra> package infrastructure. In this case, any patch that adds
or touches a .mk file that uses this infrastructure will be sent to
this developer.
Examples of usage:
$ ./support/scripts/get-developers 0001-ffmpeg-fix-bfin-build.patch
git send-email--to buildroot@buildroot.org --to "Luca Ceresoli <luca@lucaceresoli.net>" --to "Bernd Kuhls <bernd.kuhls@t-online.de>"
$ ./support/scripts/get-developers -p imx-lib
Arnout Vandecappelle <arnout@mind.be>
Gary Bisson <gary.bisson@boundarydevices.com>
$ ./support/scripts/get-developers -a bfin
Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We currently have four lists of packages in the manual:
- the non-virtual target packages,
- the virtual target packages,
- the host packages,
- the deprecated features.
Those list take more than half of the manual. They do not serve much
purpose except to show off.
After the recent discussion on the list [0], remove them all.
We can now get rid of our biggish and complex generating script (and its
companion library kconfiglib).
[0] http://lists.busybox.net/pipermail/buildroot/2016-September/171199.html
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The size-stats script fails when the usb_modeswitch_data is enabled,
because this package installs files that contain commas in their
name. However, the size-stats script also uses comma as a separator for
its CSV files, causing a "ValueError: too many values to unpack" in:
pkg, fpath = l.split(",")
Fix this by splitting only the two fields that need to be split.
The bug was reported by Matthias <porto.rio@gmx.net>, who also suggested
a fix.
Fixes bug #9136.
Reported-by: Matthias <porto.rio@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since efl update to 1.15 version, the efl package is a "real"
Buildroot package. It doesn't contain any subdirectories anymore.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As reported by Sébastien Szymanski [1], the apply-patches script
doesn't stop if a tar command can't extract an archive.
Use "set -e" to exit immediately if a command return an error.
Be sure to ignore any expected error: when we check if a patch to be
applied has the same basename as an already applied patch, the grep
would fail when no such patch was already applied. We should not fail
in this case.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Cc: Romain Naour <romain.naour@openwide.fr>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Tested-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As reported by Sébastien Szymanski [1], the apply-patches script
doesn't stop if a tar command can't extract an archive.
Use "set -e" to exit immediately if a command return an error.
[1] http://patchwork.ozlabs.org/patch/626196
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
[Thomas:
- add comment in scancpan about the version dependency, suggested by
Yann E. Morin.
- add comment in perl.mk about the need to sync any version change with
scancpan, also suggested by Yann E. Morin.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
sha256 checksum will be computed locally either by scanpypi at package
creation or by hand by package updates. Define this checksum as
'computed locally' so that one doesn't need to change this comment by
package updates. Also put comments for both md5 and sha256 in one line.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Make sure a help text is terminated with a full stop.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In most cases Python's package dependencies found in setup.py are
runtime dependencies and hence don't need to be mentioned in *.mk
file.
Also add '# runtime' tag to select statements in Config.in.
__create_mk_requirements() itself is left for future uses (cffi backend
handling etc.).
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Patches we save can come from various locations:
- bundled with Buildroot
- downloaded
- from one or more global-patch-dir
It is possible that two patches lying into different locations have the
same basename, like so (first is bundled, second is from an hypothetical
global-patch-dir):
package/foo/0001-fix-Makefile.patch
/path/to/my/patches/foo/0001-fix-Makefile.patch
In that case, when running legal-info, we'd save only the second patch,
overwriting the first. That would be problematic, because:
- either the second patch depends on the first, and thus would no longer
apply (this is easy to detect, though),
- or the second patch does not depend on the first, and the compliance
delivery will not be complete (this is much harder to detect).
We fix that by checking that no two patches have the same same basename.
If we find that the basename of the patch to be applied collides with
that of a previously applied patch, we error out and report the duplicate.
The unfortunate side-effect is that existing setups will now break in
that situation, but that's a minor, corner-case issue that is easily
fixed.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas: adjust coding style, fix minor typos in the commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, we only store the filename of the applied patches.
However, we are soon to want to install those patches in the legal-info
directory, so we'll have to know where those patches come from.
Instead of duplicating the logic to find the patches (bundled,
downloaded, from a global patch dir...), just store the full path to
each of those patches so we can retrieve them more easily later on.
Also always create the list-file, even if empty, so that we need not
test for its existence before reading it.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
[Tested only with patches in the Buildroot sources]
Tested-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas: used $PWD instead of $(pwd), as suggested by Arnout.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
A utility for creating python package from the python package index.
It fetches packages info from http://pypi.python.org and generates
corresponding packages files.
Signed-off-by: Denis THULIN <denis.thulin@openwide.fr>
Tested-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
[Thomas: minor tweaks.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, each python package (be it the python interpreter package
itself or external python modules) is responsible for compiling its
.py into .pyc files. Unfortunately, this is not ideal as some packages
only install .py files without compiling them into .pyc files. In this
case, if the Buildroot configuration specifies to keep only the .pyc
files, the .py files are removed and lost.
To address this, this commit changes the logic by making the
compilation of .pyc files a global operation: the python interpreter
packages register a target finalize hook that is in charge of
compiling all installed .py files.
The *.pyc generation on a per package basis is disabled in the
python-package infrastructure by passing the "--no-compile" option to
setup.py.
The *.pyc generation for the Python interpreter internal modules is
disabled through --disable-pyc-build configure option.
A small helper script is used to perform the compilation, the purpose
of this script is to abort the compilation process if one of the .py
file cannot be compiled. It has been provided by Samuel Martin and
integrated into this commit.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Cc: Samuel Martin <s.martin49@gmail.com>
[Thomas:
- rework for python 3.5
- integrate Samuel proposal that allows to detect compilation
failures.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The graph-build-time help text currently looks like this:
usage: graph-build-time [-h] [--type GRAPH_TYPE] [--order GRAPH_ORDER]
[--alternate-colors] [--input OUTPUT] --output OUTPUT
Obviously, naming the parameter for --input as OUTPUT is not a very
good idea, so this commit fixes that to name it "INPUT", as expected.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When preparing the legal-info, the source archives are copied in the
legal-info/ output directory. When the archives are big, it can take
quite a bit of time and unnecessarily uses disk space. When the
legal-info output directory is on the same filesystem as the BR2_DL_DIR,
we can easily reduce copy time and disk usage by just using hardlins
instead of copying. However, the BR2_DL_DIR may be on a different
filesystem, so we must fallback to copying in this case
Introduce a helper script that copies a source file into a destination
directory, by first attempting to hard-link, and falling back to a
plain copy in case the hardlink fails.
In case the destination already exists, it is forcibly removed first, to
avoid clobering any existing target file (and especially any hardlink to
it), since cp -f does not remove the destination file, but clobbers it.
In some situations, it will be necessary that the destination file is
named differently than the source, so if a third argument is specified,
it is treated as the basename of the destination file.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
At least syslinux is installing stuff in HOST_DIR/sbin.
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Make graph-depends script opening the output file in text mode since
only ascii characters will be written.
This change fixes the following error occuring when the default host
python interpreter is python3:
make: Entering directory '/opt/buildroot'
Getting targets
Getting dependencies for ['toolchain-external', 'toolchain', 'busybox', ...]
Getting dependencies for ['host-python3', 'host-pkgconf', 'host-gettext', ...]
Getting dependencies for ['host-libxml2', 'host-swig', 'host-m4', ...]
Getting version for ['toolchain-external', 'toolchain', 'busybox', ...]
Traceback (most recent call last):
File "/opt/buildroot/support/scripts/graph-depends", line 425, in <module>
outfile.write("digraph G {\n")
TypeError: a bytes-like object is required, not 'str'
Makefile:807: recipe for target 'graph-depends' failed
make[1]: *** [graph-depends] Error 1
Makefile:84: recipe for target '_all' failed
make: *** [_all] Error 2
make: Leaving directory '/opt/buildroot'
While with python2, adding 'b' to the openning mode has no effect on
Linux (c.f. [2]), the above error is expected with python3 (c.f. [1]).
Therefore, just open the outfile in default (i.e. text) mode.
[1] https://docs.python.org/3/library/functions.html#open
[2] https://docs.python.org/2/library/functions.html#open
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, these flags are recursively propagated. This behavior is
not expected by users, because it can cause dependencies explosively.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, without the flag -recommend, scancpan takes as dependency
only one which has the relationship "requires"; this mode works fine.
And, with the flag -recommend, scancpan takes all ones (ie. with
relationship "requires" or "recommends") in the same way; this mode
never works fine, because it is too simplistic.
With this commit, the "not required" dependencies are handled as
optional BR package or skipped if a cyclic dependency is detected.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Just like the --stop-on and --exclude options allow to stop on or
exclude virtual packages from the list by passing the "virtual" magic
value, this commit extends the graph-depends logic to support a "host"
magic value for --stop-on and --exclude. This will allow to draw the
graph by stopping on host packages, or by excluding host packages.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas: minor code beautification suggested by Yann E. Morin.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The condition to determine if a virtual package should be excluded
from the list due to "virtual" being passed in --exclude is under a
loop iterating over each entry of the exclude_list, but it doesn't use
the iterator of this list.
Indeed, the condition contains:
"virtual" in exclude_list
which checks automatically if "virtual" was passed in the list. Due to
this, there is no need for this check to be within the "for p in
exclude_list" iteration. This commit fixes that by moving the check
outside of the loop.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add an option to graph-depends to only do the dependency checks and not
generate the dot program.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, if there is a circular dependency in the packages, the
graph-depends script just errors out with a Python RuntimeError which is
not caught, resulting in a very-long backtrace which does not provide
any hint as what the real issue is (even if "RuntimeError: maximum
recursion depth exceeded" is a pretty good hint at it).
We fix that by recursing the dependency chain of each package, until we
either end up with a package with no dependency, or with a package
already seen along the current dependency chain.
We need to introduce a new function, check_circular_deps(), because we
can't re-use the existing ones:
- remove_mandatory_deps() does not iterate,
- remove_transitive_deps() does iterate, but we do not call it for the
top-level package if it is not 'all'
- it does not make sense to use those functions anyway, as they were
not designed to _check_ but to _act_ on the dependency chain.
Since we've had time-related issues in the past, we do not want to
introduce yet another time-hog, so here are timings with the circular
dependency check:
$ time python -m cProfile -s cumtime support/scripts/graph-depends
[...]
28352654 function calls (20323050 primitive calls) in 87.292 seconds
Ordered by: cumulative time
ncalls tottime percall cumtime percall filename:lineno(function)
1 0.012 0.012 87.292 87.292 graph-depends:24(<module>)
21 0.000 0.000 73.685 3.509 subprocess.py:473(_eintr_retry_call)
7 0.000 0.000 73.655 10.522 subprocess.py:768(communicate)
7 73.653 10.522 73.653 10.522 {method 'read' of 'file' objects}
5/1 0.027 0.005 43.488 43.488 graph-depends:164(get_all_depends)
5 0.003 0.001 43.458 8.692 graph-depends:135(get_depends)
1 0.001 0.001 25.712 25.712 graph-depends:98(get_version)
1 0.001 0.001 13.457 13.457 graph-depends:337(remove_extra_deps)
1717 1.672 0.001 13.050 0.008 graph-depends:290(remove_transitive_deps)
9784086/2672326 5.079 0.000 11.363 0.000 graph-depends:274(is_dep)
2883343/1980154 2.650 0.000 6.942 0.000 graph-depends:262(is_dep_uncached)
1 0.000 0.000 4.529 4.529 graph-depends:121(get_targets)
2883343 1.123 0.000 1.851 0.000 graph-depends:246(is_dep_cache_insert)
9784086 1.783 0.000 1.783 0.000 graph-depends:255(is_dep_cache_lookup)
2881580 0.728 0.000 0.728 0.000 {method 'update' of 'dict' objects}
1 0.001 0.001 0.405 0.405 graph-depends:311(check_circular_deps)
12264/1717 0.290 0.000 0.404 0.000 graph-depends:312(recurse)
[...]
real 1m27.371s
user 1m15.075s
sys 0m12.673s
The cumulative time spent in check_circular_deps is just below 0.5s,
which is largely less than 1% of the total run time.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, graph-depends outputs the dotfile program to stdout, and uses
stderr to trace the dependencies it is currently looking for.
Redirection was done because the output was directly piped into the dot
program to generate the final PDF/SVG/... dependency graph, but that
meant that an error in the graph-depends script was never caught
(because shell pipes only return the final command exit status, and an
empty dot program is perfectly valid so dot would not complain).
Add an option to tell graph-depends where to store the generated dot
program, and keep stdout as the default if not specified.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Samuel Martin <s.martin49@gmail.com>
[Thomas: rename metavar from DOT_FILE to OUT_FILE for consistency with
the rest of the new option naming.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Leverage the CSV files produces by size-stats (make graph-size) to allow
for a comparison of rootfs size between two different buildroot
compilations.
The script takes the file-size CSV files of two compilations as input, and
produces a textual report of the differences per package.
Using the -d/--detail flag, the report will show the file size changes
instead of package size changes.
The -t/--threshold option allows to ignore file size differences smaller
or equal than the given threshold (in bytes).
Example output is:
Size difference per package (bytes), threshold = 0
--------------------------------------------------------------------------------
-8192 busybox
228572 added dmalloc
301584 added jq
--------------------------------------------------------------------------------
521964 TOTAL
or with detailed view:
Size difference per file (bytes), threshold = 0
--------------------------------------------------------------------------------
-8192 bin/busybox
18152 added usr/bin/jq
39252 added usr/bin/dmalloc
46968 added usr/lib/libdmalloc.so
47288 added usr/lib/libdmallocxx.so
47316 added usr/lib/libdmallocth.so
47748 added usr/lib/libdmallocthcxx.so
283432 added usr/lib/libjq.so.1.0.4
--------------------------------------------------------------------------------
521964 TOTAL
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It hasn't been updated since it was added in 2008, and nowadays things kind
of stuff should be handled with genimage.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The apply-patches.sh script was using a mix of tabs and spaces, and
some three-space indentation. Normalize everything to four-space
indentation.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
A copy/paste error in the ArgumentParser() constructor call disclosed
the fact that the author of the script has shamefully based his work
on the existing graph-build-time script. This commit fixes this
mistake, therefore hiding in a better way how size-stats was
vampirized from graph-build-time.
Reported-by: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For large configurations, the execution time of
remove_transitive_deps() becomes really high, due to the number of
nested loops + the is_dep() function being recursive.
For an allyespackageconfig, the remove_extra_deps() function takes 334
seconds to execute, and the overall time to generate the .dot file is
6 minutes and 39 seconds. Here is a timing of the different
graph-depends steps and the overall execution time:
Getting dependencies: 42.5735 seconds
Turn deps into a dict: 0.0023 seconds
Remove extra deps: 334.1542 seconds
Get version: 22.4919 seconds
Generate .dot: 0.0197 seconds
real 6m39.289s
user 6m16.644s
sys 0m8.792s
By adding a very simple cache for the results of is_dep(), we bring
down the execution time of the "Remove extra deps" step from 334
seconds to just 4 seconds, reducing the overall execution time to 1
minutes and 10 seconds:
Getting dependencies: 42.9546 seconds
Turn deps into a dict: 0.0025 seconds
Remove extra deps: 4.9643 seconds
Get version: 22.1865 seconds
Generate .dot: 0.0207 seconds
real 1m10.201s
user 0m47.716s
sys 0m7.948s
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Gustavo Zacarias <gustavo.zacarias@free-electrons.com>
[yann.morin.1998@free.fr:
- rename is_dep() to is_dep_uncached(), keep existig code as-is
- add is_dep() as a cached-version of is_dep_uncached()
- use constructs more conform with 2to3
- use exceptions (EAFP) rather than check-before-use (LBYL) to be more
pythonist; that even decreases the duration yet a little bit more!
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
A series file for quilt has a valid syntax of:
fixes/autoconf.diff -p1
fixes/doc-html-local-css.diff -p1
fixes/gnu-inline.diff -p1
However, with the current way that a series file is handled, it will
error out because the -p1 is tried as a file. This is because in the
for loop that iterates the files, we only look for comment lines. Then
each line is used within a bash for loop which uses spaces a
delimiter. In order to fix this, we should only use the string that
comes before a space in the series file.
Note that the format allows for any arbitrary depth to the -pN field.
But since we'll have only one package with -pN fields, and all will be
-p1, we for now always assume -p1. This will have to be fixed whenever
we get a package with other values.
Signed-off-by: Ryan Barnett <ryanbarnett3@gmail.com>
[yann.morin.1998@free.fr: expand comment about the format of a series
file and how we interpret it]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
CC: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Despite the comment saying so, the trailing '/' in the host directory is
not removed. Note however that it is properly removed from extracted
RPATH tags.
This is not visible when the host directory is our default $(O)/host
location, but breaks for user-supplied external host directory, when
the user leaves a trailing slash in the path.
Fix that.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When we build our host programs, and they depend on a host library we
also build, we want to ensure that program actually uses that library at
runtime, and not the one from the system.
We currently ensure that in two ways:
- we add a RPATH tag that points to our host library directory,
- we export LD_LIBRARY_PATH to point to that same directory.
With these two in place, we're pretty much confident that our host
libraries will be used by our host programs.
However, it turns our that not all the host programs we build end up
with an RPATH tag:
- some packages do not use our $(HOST_LDFLAGS)
- some packages' build system are oblivious to those LDFLAGS
In this case, there are two situations:
- the program is not linked to one of our host libraries: it in fact
does not need an RPATH tag [0]
- the program actually uses one of our host libraries: in that case it
should have had an RPATH tag pointing to the host directory.
For libraries, they only need an RPATH if they depend on another library
that is not installed in the standard library path. However, any system
library will already be in the standard library path, and any library we
install ourselves is in $(HOST_DIR)/usr/lib so already in RPATH.
We add a new support script that checks that all ELF executables have
a proper DT_RPATH (or DT_RUNPATH) tag when they link to our host
libraries, and reports those file that are missing an RPATH. If a file
missing an RPATH is an executable, the script aborts; if only libraries
are are missing an RPATH, the script does not abort.
[0] Except if it were to dlopen() it, of course, but the only program
I'm aware of that does that is openssl, and it has a correct RPATH tag.
[Peter: reworded as suggested by Arnout, fix HOT_DIR typo in comment]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When a series file exists, we should use every file mentioned in it,
not just the ones ending with .patch or .diff. Also, there's no need
to uncompress anything if it's mentioned in a series file (the tools
that manipulate series files don't support compressed patches).
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Doug Kehn <rdkehn@yahoo.com>
Tested-by: Doug Kehn <rdkehn@yahoo.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
'quiet' variable is set and exported, but it is not used. We can safely
remove it.
This variable is inherited from the Makefile of the Linux kernel, and
is not used in Buildroot.
In support/scripts/mkmakefile, 'quiet' value is checked, but the test
is always true ('quiet' is never set to silent_), so the test can be
removed as well.
Signed-off-by: Cédric Marie <cedric.marie@openmailbox.org>
Reviewed-by: "James Knight" <james.d.knight@live.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
add this heuristic when no specific license file is found
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The format of the users table files is non trivial, so it is sometimes
handy to add comments explaining the syntax (or simply the reason for
the user) inline in the files.
Ignore empty lines and comment lines prefixed with '#' similar to shell
or makedevs files.
Packages that defined no user (the vast majority) would cause an empty
line to be present in the internal users table, hence the reason we
skipped empty usernames. Now that we ignore empty lines, we no longer
need to check for empty usernames.
Reported-by: Peter Korsgaard <jacmet@uclibc.org>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This new script uses the data collected by the step_pkg_size
instrumentation hook to generate a pie chart of the size contribution
of each package to the target root filesystem, and two CSV files with
statistics about the package size and file size. To achieve this, it
looks at each file in $(TARGET_DIR), and using the
packages-file-list.txt information collected by the step_pkg_size
hook, it determines to which package the file belongs. It is therefore
able to give the size installed by each package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
the perl dependency of cpan module is no longer generated by scancpan,
but added at the infrastructure level
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When a module is native or depends of a native module, it must be
disabled for static builds via its Config.in
We detect native modules by looking at the filenames listed in the
MANIFEST. If there is a file which looks like it contains code that
much be compiled (e.g. .c, .h and so on...), then we exclude that
module (and its dependencies) from static builds.
That's what we tried to do so far, but failed when there was a
comment on the same line as the filename in the manifest, like so:
foo-bar.c # Bla bla bla
Fix that by detecting either endof-line (as currently done) or
end-of-string.
For an example of failed build of perl-html-parser, see
http://autobuild.buildroot.net/results/128/128671dfa23d843698a63220c2fac1f44e1d5845/
[Thomas: use better commit log proposed by Yann E. Morin.]
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
with Perl 5.22, Module-Build is no longer a core module
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since commit 5f117c3 (webkit: mark as deprecated), generation of the
manual has been broken.
This is because that commit added a deprecated dependency on a
prompt-less symbol, BR2_PACKAGE_WEBKIT_ARCH_SUPPORTS. However, the
generation script does not check that a symbol has a prompt before
it attempts to add it to the deprecated list. So, we end up with
traceback:
Writing the virtual-packages list in:
/home/ymorin/dev/buildroot/O/build/docs/manual/virtual-package-list.txt
Traceback (most recent call last):
File "/home/ymorin/dev/buildroot/buildroot/support/scripts/gen-manual-lists.py", line 510, in <module>
buildroot.print_list(list_name, dry_run=args.dry_run, output=output)
File "/home/ymorin/dev/buildroot/buildroot/support/scripts/gen-manual-lists.py", line 466, in print_list
item_label=item_label)
File "/home/ymorin/dev/buildroot/buildroot/support/scripts/gen-manual-lists.py", line 126, in format_asciidoc_table
enable_choice=enable_choice))
File "/home/ymorin/dev/buildroot/buildroot/support/scripts/gen-manual-lists.py", line 350, in _format_symbol_prompt_location
return "| {0:<40} <| {1}\n".format(get_label_func(symbol),
File "/home/ymorin/dev/buildroot/buildroot/support/scripts/gen-manual-lists.py", line 458, in <lambda>
get_label = lambda x: self._get_symbol_label(x, mark_depr)
File "/home/ymorin/dev/buildroot/buildroot/support/scripts/gen-manual-lists.py", line 313, in _get_symbol_label
label = symbol.get_prompts()[0]
IndexError: list index out of range
However, we can not use the existing _is_deprecated filter function to
filter out symbols without prompts, because this function is also used
to add a '(deprecated)' tag in the man package list (not that it would
not work, but it does not seem /right/). Furthermore, it could also be
used (but is currently not) to build the list of virtual packages, which
do not have a prompt.
So, introduce a filter function, aptly named _is_deprecated_feature(),
to be used as the filter to find deprecated feature, and keep the
existing _is_deprecated() that can be used in any context to decide
whether a symbol is deprecated or not.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Samuel Martin <s.martin49@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
underscore is not allowed in BR package name.
this problem was found with the Perl module DB_File
which must give the BR package perl-db-file.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 971faf8 (Makefile: fix out-of-tree builds with multiple targets
with 'all') renamed the default target to '_all' to avoid name-clashing.
In doing so, I forgot to also fix the instance in the .PHONY rule.
Fix that now.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
skeleton being a mandatory dependency, we don't want all our packages to
have a link back to that node, the graph would be awful.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Small optimization so we don't have another 'make' level (caused by the
umask fix) when running the generated makefile.
Signed-off-by: Guido Martínez <guido@vanguardiasur.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Kconfiglib now runs as either Python 2 or Python 3.
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
These weren't available when gen-manual-lists.py was first written.
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Buildroot doesn't use $srctree from what I could tell.
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Corresponds to a95f477 in https://github.com/ulfalizer/Kconfiglib.
Fixes:
- Unset user values when loading a zero-byte .config. (5e54e2c)
- Ignore indented .config assignments. (f8a7510)
- Do not require $srctree to be set for non-kernel projects. (d56e9c1)
- Allow digits in $-references to symbols. (ecacdd5)
- Add Symbol.is_allnoconfig_y(). (deaa624)
- Fix small output issue with Comments inside Choices.
Also adds Python 3 support and has a lot of internal cleanup and
optimization.
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The following allows a user definition to specify that a created user
entry should not have a password value set. Original implementation
allowed a user definition to provide a password value of "=" (no quotes)
to generate a crypt-encoded empty string value. In some cases, it may be
desired to have no value specified for a user's password. By using a
value "-" for a password, no value will be set in the shadow value.
An example when this can be used is when logging into a terminal.
Logging into a session with an encoded empty password will prompt a user
to enter a password since it does not know the password is empty. If the
password field blank, a login session will not prompt for a password.
Signed-off-by: James Knight <james.knight@rockwellcollins.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For clarity, this commit renames the TARGETS variable to the more
meaningful PACKAGES variable. Indeed, only packages (handled by one of
the package infrastructures) should be listed in this variable, and
not other random non-package targets.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas: fix issues noticed by Arnout:
- Rewrap the linux/Config.in paragraph
- Revert the "is a toolchain dependency" -> "has a toolchain
dependency" change from pkg-generic.mk, as the original was
correct.]
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Like for --stop-on, make --exclude recognise the keyword 'virtual',
to stop on virtual packages (as explained in the help...).
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Similar to --stop-on, but also omits the package from the graph.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Francois Perrad <fperrad@gmail.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Francois Perrad <fperrad@gmail.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add a new option to graph-depends, that users can set to stop the graph
on a specific (set of) package(s).
This accepts any actual package name, or the 'virtual' keyword to stop
on virtual packages.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Francois Perrad <fperrad@gmail.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The current error messages are a bit terse, and do not provide all the
required information.
Expand them to provide more context.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Tom Elliott <tommygunsster@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Most of targets listed in TARGET_EXCEPTIONS these days are long
gone, so why still keep them?
Most of those targets were removed in this commit:
http://git.buildroot.net/buildroot/commit/?id=02b88600312554bf166f6cfd71f7f2ede783096a
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
virtual packages are found by their version,
so we retrieve the version of all packages
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
