Add support for OpenRISC. See here for more details about
OpenRISC http://openrisc.io.
All buildroot included upstream binutils versions are supported.
Gcc support is not upstream, to be able to enable musl C library
support later, we use the branch with musl support.
At the moment it is possible to build a musl based toolchain,
but bootup in Qemu fails.
Gdb is only working to debug bare-metal code, there is no support
for gdbserver/gdb on Linux, yet.
[Peter: drop ?= for GCC_SOURCE]
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Tested-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The 64 bits ARM processors are capable of running 32 bits ARM code, and
some platforms are indeed using this capability. Due to this, if we were
to keep the separation between Config.in.aarch64 and Config.in.arm, we
would have to duplicate the definition of all 64-bits capable ARM cores
into both files.
Instead of going down this route, let's take the same route as the x86
one: a single Config.in.x86 file, used for both x86 32 bits and x86 64
bits, with the appropriate logic to only show the relevant cores
depending on which architecture is selected.
In order to do this, we:
- Make the "ARM instruction set" choice only visible on ARM 32 bits,
since we currently don't support ARM vs. Thumb on AArch64.
- Add the relevant values for the BR2_ARCH option.
- Add the relevant values for the BR2_ENDIAN option.
- Make the "aapcs-linux" BR2_GCC_TARGET_ABI value only used on ARM 32
bits, since this ABI doesn't mean anything on AArch64.
- Make the BR2_GCC_TARGET_FPU option depends on ARM 32 bits, since
there is no -mfpu option on AArch64.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It's been deprecated for quite some time now.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
BR2_BINFMT_FLAT_SEP_DATA can be used to create XIP userland and works fine
for m68k. Unfortunately a lot of basic packages as pcre are not compileable
because of a CPU or hardware limitation. The reason for failing are very
big functions used in the libraries or application code.
Typical errors are:
Fatal error: Tried to convert PC relative branch to absolute jump
or
error: value -yyyyy out of range
Add kernel patch from 4ec5542679 to make
BR2_BINFMT_FLAT_ONE compiled firmware work fine.
Fixes:
http://autobuild.buildroot.net/results/20b/20b1586757450d6aad8583ad7a787a7ca11acef1/http://autobuild.buildroot.net/results/d31/d311955ada1ffcd7f69e82965c8fe33eabe488cd/
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
[Thomas: add comment in Config.in file about sep-data existing on m68k,
but being disabled due to build issues with numerous packages.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Greg Ungerer fixed recently a bug in the Linux kernel, which
allows to use one memory region again.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
[Thomas: cherry-picked from next to master, in order to be able to use
BR2_BINFMT_FLAT_ONE by default on m68k, since BR2_BINFMT_FLAT_SEP_DATA
causes too much problems.]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The situation looks like following for elf2flt and binfmt FLAT:
* Only gcc for bfin/m68k implements
-msep-data (BR2_BINFMT_FLAT_SEP_DATA) and
-mid-shared-library (BR2_BINFMT_FLAT_SHARED), so the corresponding
options are made only visible on those architectures.
* When the default of BR2_BINFMT_FLAT_ONE is used on m68k, broken
binaries are produced, which mainly end up in SIGILL, so do not use
it for m68k.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
[Thomas:
- also add the dependencies on m68k/bfin to BR2_BINFMT_FLAT_SHARED
- rework commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add support for m68k/coldfire. A gcc patch is required
to avoid gcc ICE.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This allows to build a m68k toolchain with uClibc.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that BR2_ARCH_HAS_ATOMICS is no longer used anywhere, we can
remove it from arch/Config.in*, as well as from the documentation.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Following the addition of AArch64 big endian, the AArch64 little
endian option had lost its 'select BR2_ARCH_HAS_MMU_MANDATORY', so
let's reintroduce it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add aarch64_be support. Note that CONFIG_CPU_BIG_ENDIAN should be
defined in kernel config when building a big endian kernel.
Signed-off-by: Zhang Jian(Bamvor) <bamvor.zhangjian@huawei.com>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Instead of (black)listing architectures when deciding the binary format,
we can enable the ELF format only when using an MMU and FLAT only when
we're not. This mimics the logic in the Linux kernel for user binaries
support.
For FDPIC, we introduce a Kconfig option to enable its selection, and
have blackfin select it.
Signed-off-by: Guido Martínez <guido@vanguardiasur.com.ar>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Instead of blacklisting which architectures support MMUs (mandatorily
or optionally), introduce two Kconfig options that are selected by each
architecture in each case.
This simplifies the logic in BR2_USE_MMU.
Signed-off-by: Guido Martínez <guido@vanguardiasur.com.ar>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As discussed on the mailinglist, this should be deprecated
before removal.
[Thomas: don't add to Config.in.legacy.]
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Although BINFMT_FLAT_SHARED is indeed a shared library format, it does
not support dynamic library loading with dlopen(). So for buildroot
purposes, BR2_STATIC_LIBS shouldn't be selected.
As it happens, the compiler options that are added for
BINFMT_FLAT_SHARED also make the compiler ignore the -static option, so
we can simply force BR2_STATIC_LIBS and things work out perfectly.
Therefore, remove the select of BR2_BINFMT_SUPPORTS_SHARED from
BINFMT_FLAT_SHARED, which in turn makes sure that BR2_STATIC_LIBS is
selected.
[Arnout: rewrite commit message, add explanatory comment]
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that we have absolutely zero reference to the avr32 architecture, we
can now really decommission the symbol.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
avr32 was slated for removal in 2015.02. Make it so!
This patch only definitively hides the symbol. When all references
to it are eradicated (to come in followup patches), we'll eventually
kill the symbol altogether.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit turns the single static option into a choice, which offers
various possibilities:
1. Build and use static libraries only;
2. Build both shared and static libraries, but use shared libraries;
3. Build and use shared libraries only.
On most platforms, (2) is currently the default, and kept as the
default in this commit. Of course, on certain platforms (Blackfin,
m68k), only option (1) will be available.
In addition to the introduction of the Config.in options, this commit
also:
* Removes the 'select BR2_STATIC_LIBS' from 'BR2_BINFMT_FLAT', since
with the use of a choice, we are guaranteed that BR2_STATIC_LIBS
will be selected when the binary format is BR2_BINFMT_FLAT, since
BR2_STATIC_LIBS will be the only possible solution in the choice.
* Changes package/Makefile.in to use the proper
--{enable,disable}-{shared,static} options for autotools packages.
[Thomas: remove useless empty newline right after 'choice'. Noticed by
Yann E. Morin.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
As noted by Yann E. Morin, those dependencies are unneeded, since FLAT
can anyway only be used on m68k and Blackfin.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In preparation for the refactoring of the static/shared library
support, we add a BR2_BINFMT_SUPPORTS_SHARED hidden option that binary
formats supporting shared libraries should select.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Currently, the binary format choice is only shown for the Blackfin and
m68k architectures, since we assume that all other architectures are
using the ELF binary format. However, due to this, the BR2_BINFMT_ELF
symbol is in fact not set to 'y' for those architectures that use the
ELF format.
This will be causing problems for the refactoring of the static/shared
library support, as we will need to know if the binary format supports
shared libraries or not.
Therefore, we simply make the choice visible on all architectures,
even if it means that on many architectures no other choice than ELF
will be available.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
The current binfmt selection in arch/Config.in allows to select FDPIC
on m68k, which is incorrect. This commit fixes that, and makes sure
FDPIC is the default on Blackfin, while FLAT is the default on m68k.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Since a while, the semantic of BR2_PREFER_STATIC_LIB has been changed
from "prefer static libraries when possible" to "use only static
libraries". The former semantic didn't make much sense, since the user
had absolutely no control/idea of which package would use static
libraries, and which packages would not. Therefore, for quite some
time, we have been starting to enforce that BR2_PREFER_STATIC_LIB
should really build everything with static libraries.
As a consequence, this patch renames BR2_PREFER_STATIC_LIB to
BR2_STATIC_LIBS, and adjust the Config.in option accordingly.
This also helps preparing the addition of other options to select
shared, shared+static or just static.
Note that we have verified that this commit can be reproduced by
simply doing a global rename of BR2_PREFER_STATIC_LIB to
BR2_STATIC_LIBS plus adding BR2_PREFER_STATIC_LIB to Config.in.legacy.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
The BR2_GCC_TARGET_TUNE option is now unused, so we can get rid of it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that all architectures explicitly select this option when it makes
sense, there is no need to have a default value.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Anton Kolesov <Anton.Kolesov@synopsys.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It's now been replaced with BR2_ARCH_HAS_ATOMICS, annd all packages have
been changed to use that instead.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Anton Kolesov <Anton.Kolesov@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The fact that atomic operations are available is not really a
specificity of the toolchain, but rather of the architecture.
So, add a new option that architectures that have atomic operations
can select. This in turn selects the current toolchain atomic option,
until all packages have been converted, at which point the old
toolchain option can be removed.
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Anton Kolesov <Anton.Kolesov@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The AVR32 architecture from Atmel is obsolete since a long time, not
supported upstream in most of the toolchain components (requires a
special version of gcc, an old version of uClibc, etc.). Until
February, Simon Dawson was making an excellent job at maintaining
AVR32 in Buildroot, and fixing all the issues caused by this
architecture. However, Simon focus has changed, and despite his call
for a new maintainer for AVR32 in Buildroot, nobody stepped up.
The issue of maintaining AVR32 is becoming worse and worse, so this
patch proposes to deprecate it for 2014.08, but keeping the support
around, to remove it for sure in 2014.11.
Cc: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This enables powerpc64 and powerpc64le. Currently, le needs at least
glibc 2.19 and gcc 4.9.0. For gdb, 7.7.1 works (added in an earlier
patch).
[Peter: also disallow gcc 4.8 for ppc64le]
Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch adds support for powerpc64le-linux-gnu. This includes
needed patches to fakeroot and gmp.
gmp patch is from upstream HG tree.
fakeroot patch is from Ubuntu written by Adam Conrad.
Signed-off-by: Jeff Bailey <jeffbailey@google.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
On some architectures one can be running a 64-bit kernel with a 32-bit
userland. Such is the case for sparc64 (unsupported) for example and
mips64 with n32 ABI.
Some tools that interface directly with the kernel need to be built
specially for this, so introduce this symbol to tweak their build in
one central kludge to be future-proof.
Example: bug #6602.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, all target options lie in the top-level menu.
This looks a bit clumsy, since all other options are neatly
folded into their own sematic sub-menus each.
Move the target option into their own sub-menu too.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This commit adds very basic support to build for the Nios II
architecture. Toolchain support is still missing and instead
we need to use an external custom toolchain.
Notice that this architecture had been previously removed in
Buildroot 2010.05-rc1 release (as explained in the CHANGES file)
and this commit adds it back.
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Until now, we were using the default ARM instruction set, as used by
the toolchain: the 32 bits ARM instruction set for the internal
backend, and for external toolchain, whatever default was chosen when
the toolchain was generated.
This commit adds support for the Thumb2 instruction set. To do so, it:
* provides a menuconfig choice between ARM and Thumb2. The choice is
only shown when Thumb2 is supported, i.e on ARMv7-A CPUs.
* passes the --with-mode={arm,thumb} option when building gcc in the
internal backend. This tells the compiler which type of
instructions it should generate.
* passes the m{arm,thumb} option in the external toolchain
wrapper. ARM and Thumb2 code can freely be mixed together, so the
fact that the C library has been built either ARM or Thumb2 and
that the rest of the code is built Thumb2 or ARM is not a problem.
[Peter: fix empty BR2_GCC_TARGET_MODE check]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As we are going to introduced a more advanced support of floating
point options for the ARM architecture, we need to adjust how the
soft-float option is handled. We replace the current hidden option
BR2_PREFER_SOFT_FLOAT option and the visible BR2_SOFT_FLOAT option by:
* A global hidden BR2_SOFT_FLOAT option, defined in arch/Config.in,
that tells whether the architecture-specific code is using software
emulated floating point. This hidden option can be used throughout
Buildroot to determine whether soft float is used or not.
* Per-architecture visible BR2_<arch>_SOFT_FLOAT options, for the
architecture for which it makes sense, which allows users to select
soft float emulation when needed.
This change will allow each architecture to have a different way of
presenting its floating point capabilities.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Buildroot already has the BR2_GCC_TARGET_{TUNE,ARCH,ABI,CPU} hidden
kconfig strings that allow per-architecture Config.in files to feed
the appropriate values of --with-{tune,arch,abi-cpu} when building
gcc, or the appropriate flags for the external toolchain wrapper.
This commit has two additional options:
BR2_GCC_TARGET_{FPU,FLOAT_ABI}, that allows to define the
--with-{fpu,float} gcc configure options for the internal backend, or
the -m{fpu,float-abi} options for the flags of the external toolchain
wrapper.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Just introduce the symbol and options in arch generic Config.in.
Add FLAT types specific compiling flags into package makefile.
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Adds the possibility to have a free-form CPU revision string and append it
to the target CPU. Only Blackfin actually uses this option.
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Just introduce the symbol and options in arch generic Config.in.
Append FLAT format link flags to external toolchain wrapper.
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Synopsys' DesignWare ARC Processor Cores are a family of 32-bit CPUs that
can be used from deeply embedded to high performance host applications.
Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The Xtensa architecture had been removed because it required special
handling and depended on additional directories and files that became
obsolete over time. This change is more aligned to other architectures.
[Thomas: rebased on top of the "arch: improve definition of gcc mtune,
mcpu, etc." patch].
Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As suggested by Yann E. Morin, there is a better way than our current
big Config.in.common to define the gcc mtune, mcpu, march,
etc. values. We can split the setting of those values in each
architecture file, which makes a lot more sense.
Therefore, the Config.in file now creates empty kconfig variables
BR2_ARCH, BR2_ENDIAN, BR2_GCC_TARGET_TUNE, BR2_GCC_TARGET_ARCH,
BR2_GCC_TARGET_ABI and BR2_GCC_TARGET_CPU. The values of those
variables are set by the individual Config.in.<arch> files. This is
possible because such files are now only conditionally included
depending on the top-level architecture that has been selected.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
target/Config.in.arch had become too long, and we want to remove the
target/ directory. So let's move it to arch/ and split it this way:
* An initial Config.in that lists the top-level architecture, and
sources the arch-specific Config.in.<arch> files, as well as
Config.in.common (see below)
* One Config.in.<arch> per architecture, listing the CPU families,
ABI choices, etc.
* One Config.in.common that defines the gcc mtune, march, mcpu values
and other hidden options.
[Peter: space->tab fix, mipsel64 little endian, mips3 as noted by Arnout]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
