If libglib2 is not found or disable through --without-glib2, irqbalance
will use its own implementation of glib2 so add a mandatory libglib2
dependency especially as upstream now enforce it:
1d2f6a9b6c
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The configure script of xutil_makedepend uses PKG_CHECK_MODULES(), so
it should depend on host-pkgconf. Otherwise, a "make
host-xutil_makedepend" fails with:
"""
checking for X... configure: error: in `/home/thomas/projets/buildroot/output/build/host-xutil_makedepend-1.0.5':
configure: error: The pkg-config script could not be found or is too old. Make sure it
is in your PATH or set the PKG_CONFIG environment variable to the full
path to pkg-config.
Alternatively, you may set the environment variables X_CFLAGS
and X_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.
To get pkg-config, see <http://pkg-config.freedesktop.org/>.
"""
This was detected using per-package host/target directories, but can
be reproduced without it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In commit 2524acd417
("package/x11r7/xlib_libxshmfence: bump version to 1.3"), the patch
0001-configure.ac-call-AC_USE_SYSTEM_EXTENSIONS.patch was dropped, but
the corresponding AUTORECONF = YES was not dropped.
This causes a build issue if just xlib_libxshmfence is built (using
"make xlib_libxshmfence" or using per-package host/target directories):
>>> xlib_libxshmfence 1.3 Autoreconfiguring
configure.ac:40: error: must install xorg-macros 1.3 or later before running autoconf/autogen
configure.ac:40: the top level
This commit fixes that by dropping the no longer needed
AUTORECONF = YES.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When <pkg>_NEEDS_EXTERNAL_WAF is set to YES, <pkg>_WAF is set to
$(HOST_DIR)/bin/waf within the inner-waf-package macro. This reference
to $(HOST_DIR) should use $$(HOST_DIR) so that it is properly expanded
at the time of use, and not at the time of the macro expansion.
In the current Buildroot, this doesn't cause any visible problem
because $(HOST_DIR) points to the same directory for all
packages. However, with per-package host/target directories, this is
no longer the case. It causes a build issue because it tries to use
"waf" from the global host directory, which doesn't exist during the
build.
This commit fixes the following build issue with per package
host/target directories:
/home/test/autobuild/run/instance-2/output/per-package/mpv/host/bin/python2: can't open file '/home/test/autobuild/run/instance-2/output/host/bin/waf': [Errno 2] No such file or directory
make: *** [/home/test/autobuild/run/instance-2/output/build/mpv-0.27.2/.stamp_configured] Error 2
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- README has been renamed into README.md so update NUMACTL_LICENSE_FILES
- Add hash for license file
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Use SPDX short identifier (Imlib2) instead of full name
- Add COPYING-PLAIN to license files
- Add hash for license files
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Acked-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Ferdinand van Aartsen <ferdinand@ombud.nl>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add upstream patch to fix build error:
ping.c: In function ‘main’:
ping.c:212:23: error: ‘AI_CANONIDN’ undeclared (first use in this function); did you mean ‘AI_CANONNAME’?
hints.ai_flags &= ~ AI_CANONIDN;
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Make use of https for sqlite.org.
Signed-off-by: Ferdinand van Aartsen <ferdinand@ombud.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The old URL was not working for quite some time.
Signed-off-by: Marcel Patzlaff <m.patzlaff@pilz.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add RISC-V 64-bit defconfig for QEMU virt machine.
Tested with QEMU 2.12.1
Signed-off-by: Mark Corbin <mark.corbin@embecosm.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add the RISC-V Proxy Kernel (pk) package which provides the Berkeley
Boot Loader for booting RISC-V kernel images.
Signed-off-by: Mark Corbin <mark.corbin@embecosm.com>
[Thomas:
- fix prompt of option to be just "riscv-pk"
- add blank line between help text and upstream URL in Config.in file
- use $(INSTALL) instead of cp to install the generated image]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This enables a riscv64 system to be built with a Buildroot generated
toolchain (gcc >= 7.x, binutils >= 2.30, glibc only).
This configuration has been used to successfully build a qemu-bootable
riscv-linux-4.15 kernel (https://github.com/riscv/riscv-linux.git).
Signed-off-by: Mark Corbin <mark.corbin@embecosm.com>
[Thomas:
- simplify arch.mk.riscv by directly setting GCC_TARGET_ARCH
- simplify glibc.mk changes by using GLIBC_CONF_ENV.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
glibc is not using the autotools-package infrastructure, so we are
calling the ./configure script manually. Currently, the few autoconf
cache variables are passed as arguments to the ./configure script,
while we pass them through the environment in the autotools-package
infrastructure.
So let's pass them in the environment, and use a GLIBC_CONF_ENV
variable to store them. This will allow in a follow-up commit to
conditionally add more autoconf cache variables to the glibc build.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Copyright and COPYING file sha256 are missing.
Add them calculating locally.
Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
At is now available on a git repository at:
https://salsa.debian.org/debian/at
Main changes 3.1.16 -> 3.1.23:
- add support for SELinux, multiple files
- improve atd.service, see bug report 892819
- fix various bugs and warnings
- finalized script to release software
So:
- change AT_SITE_METHOD to git pointing to release/3.1.23
- update tarball sha256 in hash file
- improved S99at script:
if /var/spool is linked to /tmp, .SEQ file will be lost and atd won't
work neither for a live session. Create .SEQ file if not found, warning
during start that after reboot atjobs could be lost.
Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The BR2_GCC_TARGET_* configuration variables are copied to
corresponding GCC_TARGET_* variables which may then be optionally
modified or overwritten by architecture specific makefiles.
All makefiles must use the new GCC_TARGET_* variables instead
of the BR2_GCC_TARGET_* versions.
Signed-off-by: Mark Corbin <mark.corbin@embecosm.com>
[Thomas: simplify include of arch/arch.mk]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add support for building toolchains against custom headers. Allows
the selection of a manual version, custom tarball or custom git
repository for the kernel headers. This enables toolchains to be
built against custom kernel headers without having to build a full
kernel.
This is particularly useful for new architectures, such as RISC-V
where updated kernel headers may not have made it into the mainline
kernel yet.
Signed-off-by: Mark Corbin <mark.corbin@embecosm.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit reworks how linux-headers.mk is written to prepare adding
support for custom tarball/git fetching for the Linux kernel headers.
Basically, the idea is to have a single condition at the beginning of
the file that defines a number of LINUX_HADERS_* variables depending
on whether "kernel headers same as kernel" is used or not, and then
use these variables in the rest of the .mk file.
Signed-off-by: Mark Corbin <mark.corbin@embecosm.com>
[Thomas: split from the original patch "package/linux-headers: add
support for custom headers" from Mark. The commit log is entirely
mine.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Added a hash file for the Linux kernel. Hashes have been copied
from the appropriate sha256sums.asc files on kernel.org.
The Linux hash file is also shared with the linux-headers package
via a symbolic link.
Signed-off-by: Mark Corbin <mark.corbin@embecosm.com>
[Thomas: update hashes with recent linux-headers changes.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Patch 0002-util-fall-back-to-reading-dev-urandom-when-getrandom.patch
was applied upstream in this version, so it can be deleted.
Signed-off-by: Ferdinand van Aartsen <ferdinand@ombud.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
mrouted part of igmpproxy is licensed under BSD-3-Clause so add this in
IGMPPROXY_LICENSE and add hash for license files
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Remove 0003-Revert-libbb-remove-unnecessary-variable-in-xmalloc_.patch
It caused a segfault which was fixed in this release.
Signed-off-by: Ferdinand van Aartsen <ferdinand@ombud.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The latest uClibc-ng version (1.0.30) provides clock_nanosleep() even
for non NPTL configurations.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
As specified in COPYING, examples are licensed under GPL-3.0+ and .x
files are licensed under BSD-2-Clause.
So update LIBNFS_LICENSE, add COPYING, LICENCE-BSD.txt and
LICENCE-GPL-3.txt to LIBNFS_LICENSE_FILES and add hash for all license
files
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The latest uClibc-ng version (1.0.30) provides clock_nanosleep() even
for non NPTL configurations.
Don't keep a dependency on threads as can-utils doesn't need it
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently libxslt configure finds native /usr/bin/xml2-config.
Signed-off-by: Ferdinand van Aartsen <ferdinand@ombud.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The releases on Github produces a setuptools version that isn't PEP518
compliant because a .post number is attached to the .egg file
(IE: 40.0.0.post20180820) which can cause a python package using setuptools
to fail if looking for a setuptools version.
Instead, using the official release from pypi is recommended as it does not
produce a .post version on the egg file.
Another benefit is not having to run bootstrap.py either.
See https://github.com/pypa/setuptools/issues/1462 for more details about
the issue
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The latest uClibc-ng version (1.0.30) provides clock_nanosleep() even
for non NPTL configurations.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
And warn to use $() instead.
For examples see [1] and [2].
In the regexp, search for ${VARIABLE} but:
- ignore comments;
- ignore variables to be expanded by the shell "$${}".
[1] http://lists.busybox.net/pipermail/buildroot/2018-July/225211.html
[2] 36305380db
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
encode_half has been moved from compilersupport_p.h to cborinternal_p.h
in commit
bfc40dcf90
so include this file in json2cbor to avoid the following build failure
on tinycbor 0.5.2:
/home/buildroot/autobuild/run/instance-0/output/host/bin/microblazeel-linux-gcc -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -I./src -std=gnu99 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -c -o tools/json2cbor/json2cbor.o tools/json2cbor/json2cbor.c
tools/json2cbor/json2cbor.c: In function 'decode_json_with_metadata':
tools/json2cbor/json2cbor.c:295:50: warning: implicit declaration of function 'encode_half' [-Wimplicit-function-declaration]
(half = encode_half(v), cbor_encode_half_float(encoder, &half));
^~~~~~~~~~~
/home/buildroot/autobuild/run/instance-0/output/host/bin/microblazeel-linux-gcc -o bin/json2cbor tools/json2cbor/json2cbor.o lib/libtinycbor.so -lcjson -lm
tools/json2cbor/json2cbor.o: In function `decode_json_with_metadata':
(.text+0xe54): undefined reference to `encode_half'
collect2: error: ld returned 1 exit status
Makefile:151: recipe for target 'bin/json2cbor' failed
Fixes:
- http://autobuild.buildroot.net/results/afd8d24f2a4e501264abff618cf421d4bd088ebf
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
cppcms is now licensed under MIT so update license and add hash for
MIT.TXT
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
cppcms contains embedded third party software so add
THIRD_PARTY_SOFTWARE.TXT to CPPCMS_LICENSE_FILES as well as the
additional licenses to CPPCMS_LICENSE.
Also add hash for COPYING.TXT and THIRD_PARTY_SOFTWARE.TXT
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Allows scripting of URL checking to be simplier
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
