Commit dfed5acb56 ("utils/check-package: use https for the manual URL")
replaced the default url to the Buildroot manual while it was used
by TestCheckPackage test.
Update TestCheckPackage with https url.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/6224243484
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Instead of waiting for a hardcoded time of 30s we check periodically every
second if the server is already up. If it isn't up after the full timeout
(which is the same as before) expired the test fails.
We need to redirect all output of the background started task to
/dev/null now as it otherwise confuses the emulator.run() exit code
parsing logic (as it gets out of order messages from the emulator).
Signed-off-by: Marcus Hoffmann <buildroot@bubu1.eu>
yann.morin.1998@free.fr: simplify assert test]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Similar to the new fastapi test, instead of waiting for a hard coded
amount of time we can retry every second until the server is available
and abort if after the timeout we still didn't manage to connect.
Signed-off-by: Marcus Hoffmann <buildroot@bubu1.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
gpg key generation can take longer than the default timeout on a
loaded or slow test host. The commit increase the timeout for the
key generation command to prevent the test to randomly fail.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The symmetric encryption test can sometimes take longer than the default
timeout. This commit increase the timeout to 10 seconds for that
command.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
TestGlxinfo fail with a new runtime error:
# glxinfo -B -display :0
name of display: :0
traps: glxinfo[84] trap invalid opcode ip:b73c7027 sp:bf8433c0 error:0 in swrast_dri.so[b6e4c000+64f000]
Illegal instruction
The x86-core2 Bootlin toolchains are built for a core2 CPU [0],
this means that the Bootlin toolchains may use core2-specific
instructions.
The TestGlxinfo test is setup for BR2_x86_core2, so our
executables will also contain core2 instructions.
However, the default Qemu x86 is not guaranteed to emulate all the
instructions specific to core2, causing runtime issues as reported
above.
A similar issue has been fixed by adding Nehalem cpu emulation on
the qemu command line. See 4f565b5222 ("support/testing: use Nehalem
cpu emulation for TestGrubX8664EFI").
Set core2duo cpu emulation for TestGlxinfo on the qemu command line.
[0] https://gitlab.com/buildroot.org/toolchains-builder/-/blob/kubu/toolchain-builder-2023.08/configs/arch/x86-core2.config?ref_type=heads
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The current package has not recieved an update since Sat Oct 9 2021
33ece2446e and is not python 3.12 compatible.
Furthermore, the current version requires at least 42 new packages worth of
depedencies of which several require patches to be python 3.12 compatible.
As nobody has stepped up to maintain the package and its ever-growing list of
dependencies, along with the other problems, it is time to drop the package.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a runtime test for fastapi. Use uvicorn as the asgi server
application as does the fastapi hello world example [1].
Fastapi depends on PydanticV2 now which is written in rust so we need to
run the test on armv7.
[1] https://fastapi.tiangolo.com/tutorial/first-steps/
Signed-off-by: Marcus Hoffmann <bubu@bubu1.eu>
[Arnout:
- fix flake8 errors
support/testing/tests/package/sample_python_fastapi.py:5:1: E302 expected 2 blank lines, found 1
support/testing/tests/package/sample_python_fastapi.py:8:1: W391 blank line at end of file
- Remove BR2_CCACHE (as requested by Marcus).
- Add a comment explaining that this also tests uvicorn and pydantic.
- Re-try wget in a loop instead of a fixed timeout of 30 seconds.
- Add a DEVELOPERS entry.
]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Under some conditions (mostly slow execution due to test host load),
the netcat runtime test can randomly fail. This is due to several
facts:
- the sleep time between the server and client is too short,
- the use of netcat option -c could close the connection before the
server could receive all the data.
This commit improves the test robustness by increasing the sleep time,
and by reducing the amount of transferred data (from 1MB of random data,
to a simpler string of few bytes). Also, to make sure netcat cannot wait
on DNS resolution, this commit also adds the -n option.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/6093854664
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
In commit 7e0e6e3b86 (toolchain/toolchain-external/toolchain-external-bootlin:
update to 2023.11-1) the TestGrubX8664EFI fails with this error:
# efivar -l
traps: efivar[86] trap invalid opcode ip:7fc187f4c7f4 sp:7fff9bbaa930 error:0 in libefivar.so.1.38[7fc187f4c000+16000]
Illegal instruction
This error can be reproduced by installing other packages like "file".
The 2023.11-1 Bootlin toolchains are built for a corei7 CPU [0], which
is in fact a Nehalem CPU; we switched to the new names in commit
653fa001f3 (arch/Config.in.x86: add "newer" names for several Intel
x86 CPU variants). This means that the Bootlin toolchains may use
Nehalem-specific instructions.
The TestGrubX8664EFI test is also setup for BR2_x86_corei7, so our
executables will also contain Nehalem instructions.
However, the default Qemu x86_64 is not guaranteed to emulate all the
instructions specific to Nehalem, causing runtime issues as reported
above.
A similar issue has been fixed in toolchain-builder by adding Nehalem
cpu emulation on the qemu command line [0].
Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/6093853712
[0] f2b253732b
Signed-off-by: Romain Naour <romain.naour@smile.fr>
[yann.morin.1998@free.fr:
- reword the commit log to explain corei7 -> Nehalem equivalence
- note that the toolchain-builder *and* our test target corei7, thus
Nehalem
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Marcus Hoffmann <bubu@bubu1.eu>
[yann.morin.1998@free.fr: add the comment to explain failure is success]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 8f403f0 "package/micropython-lib: merge with, and install
as part of micropython" brought micropython library within the
package.
This commit improves the micropython runtime test by enabling the
micropython-lib and by also adding a runtime test using one of its
module. We choose to use the gzip module, and check whther decodign q
simple gziped file works; the micropython-lib gzip can only decompress,
so we need to prepare it from the shell.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The rootfs generated TestPythonPy3SciPy by doesn't fit anymore in 120M.
Increase the rootfs size to 250M and checking the amount of space
available on the file system.
Filesystem Size Used Available Use% Mounted on
/dev/root 232.3M 134.5M 85.3M 61% /
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/5880448601
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Reviewed-by: Antoine Coutant <antoine.coutant@smile.fr>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Currently the tests TestRust and TestRustBin do check for vendoring by
requiring package ripgrep to be built but only if the download
directory is already empty, otherwise the existing contents of the download
directory will be reused and therefore not be redownloaded.
This new test will only verify that the required packages are downloaded
and vendored correctly without doing a runtime test. It does so by setting a
path to a folder "dl" inside the build directory (output-directory/testname/)
and then setting the environment variable BR2_DL_DIR to this path before the
build starts. BR2_DL_DIR is not set in the config options because it would be
overridden by the user's own environment variable if defined. This code was
essentially copied from the file test_gitforge.py which was added in commit
1ca6ab6ace
We want the package ripgrep to be built since it requires vendoring
directly. Additionally we want the package python-cryptography to be
built because it has rust dependencies and therefore indirectly also requires
vendoring.
Signed-off-by: Sebastian Weyer <sebastian.weyer@smile.fr>
Signed-off-by: Antoine Coutant <antoine.coutant@smile.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The test_python_ml_dtypes.py enabled BR2_PACKAGE_PYTHON3_ZLIB=y in its
configuration to workaround the fact that the toolchain used to
testing was tainted with zlib.
The commit 7e0e6e3
"toolchain/toolchain-external/toolchain-external-bootlin: update to
2023.11-1" updated the toolchains which are no longer tainted with
zlib.
The workaround is no longer needed and this commit removes this
config, for consistency.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
New toolchains have been released, with the following changes:
- The bleeding-edge toolchains are based on gcc 13.2, binutils 2.41,
gdb 14.1, kernel headers 5.10, glibc 2.38, musl 1.2.4 or uclibc-ng
1.0.45.
- The stable toolchains are based on gcc 12.3, binutils 2.40, gdb
13.2, kernel headers 4.14, glibc 2.38, musl 1.2.4 or uclibc-ng
1.0.45.
- The glibc version is no longer affected by CVE-2023-4911
- The gdb build has been fixed to no longer rely on uninstalled
libbfd.so and libopcodes.so libraries
- The zlib library, which was incorrectly present in the toolchain
sysroot, is gone, fixing various build failures encountered with
2023.08 toolchains.
- There are now toolchains for m68k 68xxx based on uclibc and musl in
addition to glibc, which was already supported
The careful reviewer will notice that a number of
depends on !BR2_ARCH_NEEDS_GCC_AT_LEAST_14
are being added to the toolchains that use gcc 13.x, as per
a0d2a5cfec
("support/scripts/gen-bootlin-toolchains: generate
BR2_ARCH_NEEDS_GCC_AT_LEAST_X guard").
All 214 test cases were successfully run:
https://gitlab.com/tpetazzoni/buildroot/-/pipelines/1120323562
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
ml_dtypes is a stand-alone implementation of several NumPy
dtype extensions used in machine learning libraries.
https://github.com/jax-ml/ml_dtypes
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
