The toplevel mosquitto comment should go after the sub options to ensure
they get indented, and the broker comment should be hidden if mosquitto
isn't enabled.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It is buildroot-association@buildroot.org, not @lists.buildroot.org.
Reported-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The build currently fails with:
*** dtoc needs the Python libfdt library. Either
*** install it on your system, or try:
***
*** sudo apt-get install swig libpython-dev
***
*** to have U-Boot build its own version.
Adding BR2_TARGET_UBOOT_NEEDS_PYLIBFDT should fix this build issue,
which was reported at:
https://gitlab.com/buildroot.org/buildroot/-/jobs/158295223
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Contrary to what the comment in the defconfig says, the
orangepi_lite2_defconfig was not using the "same as kernel" option for
kernel headers, but really selecting explicitly Linux 4.18 headers,
independently from the kernel version.
Except that in the mean time, BR2_KERNEL_HEADERS_4_18 has been
removed, causing a build failure due to the legacy checking:
Makefile.legacy:9: *** "You have legacy configuration in your .config! Please check your configuration.". Stop.
This commit fixes that by using the proper
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_18 option.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/158295163
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As noticed by Yann E. Morin, the address of the Paypal account is
@buildroot.org, not @lists.buildroot.org.
Reported-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In commit 7fb6e78254 (core/instrumentation: shave minutes off the
build time), the built stampfile is used as a reference to detect files
installed by a package.
However, packages may install files keeping their mtime intact, and we
end up not detecting this. For example, the internal skeleton package
will install (e.g.) /etc/passwd with an mtime of when the file was
created in $(TOP_DIR), which could be the time the git repository was
checked out; that mtime is always older than the build stamp file, so
files installed by the skeleton package are never accounted for to that
package, or to any other package for that matters.
We switch to an alternate solution, which consists of storing some extra
metadata per file, so that we can more reasily detect modifications to
the files. Then we compare the state before the package is installed (by
reusing the existing list) and after the package is installed, compare
that to list any new file or modified files (in reality, ignoring
untouched and removed files). Finally, we store the file->package
association in the global list and store the new stat list as the global
list.
The format used for the .stat file is:
mtime:inode:perms:filetype:size,filename
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Trent Piepho <tpiepho@impinj.com>
[Peter: rename files, reformat, only look for files and symlinks and pass
LC_ALL=C to comm as pointed out by Thomas De Schampheleire]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
For about two years, a legal entity called "Buildroot Association" was
created in France to support the Buildroot project. Until fall 2018,
this legal entity has not been used. In fall 2018, we started using it
in order to receive donations from companies in order to organize the
Buildroot Developers Meeting that took place before the Embedded Linux
Conference Europe 2018 in Edinburgh.
This commit creates a new page on our web site that documents the
existence of this Buildroot Association, and details how to become a
member. Both individuals and companies can become members.
It is worth stating that the Buildroot Association does not control
the Buildroot project: it remains a fully open-source and
community-driven project. The Buildroot Association only serves as a
legal entity to handle donations and money needed to organize the
Buildroot Developers Meeting, and pay for a few expenses related to
the project (such as domain names).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[Arnout: small improvements]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fixes the following flake8 warnings:
support/scripts/pkg-stats:34:2: W605 invalid escape sequence '\$'
support/scripts/pkg-stats:34:4: W605 invalid escape sequence '\('
support/scripts/pkg-stats:34:11: W605 invalid escape sequence '\$'
support/scripts/pkg-stats:34:13: W605 invalid escape sequence '\('
support/scripts/pkg-stats:34:32: W605 invalid escape sequence '\)'
support/scripts/pkg-stats:34:34: W605 invalid escape sequence '\)'
support/scripts/pkg-stats:35:2: W605 invalid escape sequence '\s'
support/scripts/pkg-stats:35:14: W605 invalid escape sequence '\S'
support/scripts/pkg-stats:35:17: W605 invalid escape sequence '\s'
support/scripts/pkg-stats:42:1: E302 expected 2 blank lines, found 1
support/scripts/pkg-stats:587:133: E501 line too long (157 > 132 characters)
Note that the "invalid escape sequence" errors work because Python
leaves the \ in place if it doesn't recognise the escape sequence. But
it's better practice to use a raw string for regular expressions.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
check-package OverriddenVariable check believes we are overriding the
value of GOOGLEFONTDIRECTORY_LICENSE, but in fact we are not. Let's
tell check-package not to complain about this.
Fixes:
package/googlefontdirectory/googlefontdirectory.mk:28: unconditional override of variable GOOGLEFONTDIRECTORY_LICENSE previously conditionally set
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes the following check-package warning:
boot/uboot/Config.in:185: attributes order: type, default, depends on, select, help (http://nightly.buildroot.org/#_config_files)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Configuration contains:
- building tpl, spl and u-boot (forked u-boot repository)
- booting from SD card and network via PXE
- working ethernet, usb and uart
- minimal rootfs with busybox
- ready to flash SD card image
Signed-off-by: Michał Łyszczek <michal.lyszczek@bofc.pl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Whether using the new sysusers.d snippet, or adding an entry to
/etc/password, set the service's home directory to /var/empty.
See README.privsep included as part of the openssh distribution.
Signed-off-by: Chris Lesiak <chris.lesiak@licor.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This variant contains various optimizations for i.MX processors.
For instance, on i.MX6/7 devices with GPU, the gl-renderer needs to be
enabled for the fbdev-backend which was removed from upstream weston
long time ago.
Also, weston-imx adds support for G2D which is enabled by default, this
patch makes sure to disable it when imx-gpu-g2d isn't selected.
The tag version rel_imx_4.9.51_8mq_ga proved to work fine on both
i.MX6Q/DL and i.MX8MQ processors.
Here are the commands used to start weston on i.MX6Q:
- Using 3D GPU (gl-renderer):
# weston --tty=1 --device=/dev/fb0
- Using 2D GPU (G2D):
# weston --tty=1 --device=/dev/fb0 --use-g2d=1
Upstream repository:
https://source.codeaurora.org/external/imx/weston-imx/
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Arnout: add comment why no --enable option is passed]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Since all EFI-based systems support GPT, this commit changes
pc_x86_64_efi to use a GPT partition table. It shows an example of how
to craft a disk image with GPT partitioning instead of MBR. This is
achieved by means of a post-image script which uses
mkdosfs+mcopy+sfdisk, since genimage is unable to deal with GPT. Long
term, it would be ideal if genimage had GPT support, but until then,
this script shows how to achieve creating a GPT-based disk image.
The script was kept as simple as possible to make it easy to understand
and adapt for other purposes.
The root filesystem location is passed to the kernel by a partition
UUID, so it is possible to boot on QEMU, directly from the disk image,
or dump the image to a physical device.
Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
No functional change is brought by this modification.
This patch removes redundant <pkg>_SRCDIR declaration
(already defined in pkg-generic.mk)
Signed-off-by: Lionel Orry <lionel.orry@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
No functional change is brought by this modification.
This patch:
* removes redundant <pkg>_SRCDIR and <pkg>_BUILDDIR declarations
(already defined in pkg-generic.mk)
* documents the usage of <pkg>_SUBDIR in the python-specific section of
the manual.
Signed-off-by: Lionel Orry <lionel.orry@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
No functional change is brought by this modification.
This patch:
* removes a redundant <pkg>_SRCDIR declaration (already defined in
pkg-generic.mk)
* documents the usage of <pkg>_SUBDIR in the meson-specific section of
the manual.
Signed-off-by: Lionel Orry <lionel.orry@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In the Buildroot manual, it is specified that the Waf-based
infrastructure supports the <pkg>_SUBDIR variable, which was not true.
This patch:
* makes use of this variable by changing to the given sub-directory
before executing waf commands,
* documents the usage of <pkg>_SUBDIR in the waf-specific section of
the manual.
Signed-off-by: Lionel Orry <lionel.orry@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This doesn't introduce a new config flag, instead it just automatically enables
draft support if it's configured in the zeromq package itself.
Signed-off-by: Lionel Flandrin <lionel@svkt.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
If the user is brave enough to use a custom rootfs skeleton then we must
not prevent using merged /usr too. Actually it is already possible to do
this, although indirectly, by selecting BR2_INIT_SYSTEMD.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Since commit 0db34529f4 we use rsync with the --keep-dirlinks option to
prevent overlays from accidentally overwriding /{usr,bin,sbin,lib} links
when BR2_ROOTFS_MERGED_USR option is enabled. Unfortunately this also
prevents replacing a symlink by a directory on purpose (e.g. /var/log,
to persist system logs).
Steps to reproduce:
- enable BR2_ROOTFS_MERGED_USR and BR2_PACKAGE_SKELETON_INIT_SYSV
- mkdir some_path/rootfs-overlay/var/log
- enable BR2_ROOTFS_OVERLAY="some_path/rootfs-overlay"
- run 'make'
- 'target/var/log' is still a symlink to '../tmp', not a directory
The --keep-dirlinks option can be dropped, since we run sanity checks
on overlays. Now the rsync invocation is identical to the SYSTEM_RSYNC
logic we have in system/system.mk, so use that variable.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add a step to target-finalize that checks each rootfs overlay, following
the criteria established for custom skeletons and using the same script
uesd by skeleton-custom.mk.
Add a paragraph to the documentation clarifying that rootfs overlays
don't need to contain /bin, /lib or /sbin and must not contain them when
BR2_ROOTFS_MERGED_USR is enabled.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
skeleton-custom does not install the required /bin, /lib and /sbin
directories (or symlinks), which may result in an imcomplete tree, The
user could add the required directories/symlinks to the skeleton but
they may be invalid, depending on the state of BR2_ROOTFS_MERGED_USR.
Steps to reproduce:
- Enable BR2_ROOTFS_MERGED_USR and BR2_INIT_SYSTEMD
- Set BR2_ROOTFS_SKELETON_CUSTOM_PATH to "system/skeleton"
- Run "make skeleton"
- target/{bin.lib,sbin} will not exist
Add calls to SYSTEM_USR_SYMLINKS_OR_DIRS to INSTALL_TARGET_CMDS and
INSTALL_STAGING_CMDS, so the required directories or symlinks are
created.
Add a paragraph to the documentation clarifying that custom skeletons
don't need to contain /bin, /lib or /sbin and must not contain them when
BR2_ROOTFS_MERGED_USR is enabled.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Introduce support/scripts/check-merged-usr.sh, a script that check if a
given path complies to the merged /usr requirements:
/
/bin -> usr/bin
/lib -> usr/lib
/sbin -> usr/sbin
/usr/bin/
/usr/lib/
/usr/sbin/
Use this script in skeleton-custom.mk instead of a bunch of variables
filled by $(shell ...) macros. The same script will be used to check
rootfs overlays, in a forthcoming change.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Rockchip's rk3328 encapsulates the BL31 part of ATP but it needs
image in ELF format. This is extension to
2c4809e608
This commit introduces a BR2_TARGET_UBOOT_NEEDS_ATF_BL31_ELF variable
to achieve this.
Signed-off-by: Michał Łyszczek <michal.lyszczek@bofc.pl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Allow user to choose specific, stable version from official ATF
repository
Signed-off-by: Michał Łyszczek <michal.lyszczek@bofc.pl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Now that Qt4 is removed, the support in libv4l can be removed as well.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Now that Qt4 is removed, the support in gpsd can be removed as well.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Now that Qt4 is removed, these fixups can be removed as well.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The current transform changes any '.' at the start of a filename to
$(BR2_SDK_PREFIX). This also applies to the target of a symlink, when
it is relative.
We thus might end up with something like:
$(BR2_SDK_PREFIX)/bin/aarch64-linux-gnu-ar ->
$(BR2_SDK_PREFIX)./opt/ext-toolchain/bin/aarch64-linux-gnu-ar
when it should be:
$(BR2_SDK_PREFIX)/bin/aarch64-linux-gnu-ar ->
../opt/ext-toolchain/bin/aarch64-linux-gnu-ar
We fix that by making sure we always remove a known prefix, i.e. we
remove the path to host dir. The obvious solution would be to cd into
$(HOST_DIR)/.. , then tar ./host/ and finally use a --transfrom pattern
as 's,^\./$(notdir $(HOST_DIR)),$(BR2_SDK_PREFIX)'.
Since $(HOST_DIR) can point to a user-supplied location, we don't know
very well how the pattern may patch.
Instead, we cd into / and tar the full path to $(HOST_DIR).
Since tar removes any leading '/', it would spurr a warning message,
which is annoying. So we explicitly remove the leading '/' from
$(HOST_DIR) when we tar it.
Finally, we transform all filenames to replace a leading $(HOST_DIR)
(without a leading /) to the prefix to use.
Signed-off-by: Joel Carlson <JoelsonCarl@gmail.com>
[yann.morin.1998@free.fr:
- use a single transform pattern
- use full HOST_DIR path as pattern to replace
- update commit log accordingly
]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fixes a runtime bug on compilers where unsigned char is the default.
Fixes a runtime bug where _state variable in the encoder and decoder
c++ objects where not initialized by the constructors.
Signed-off-by: Mikael Eliasson <mikael@robomagi.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit adds fetching the latest upstream version of each package
from release-monitoring.org.
The fetching process first tries to use the package mappings of the
"Buildroot" distribution [1]. This mapping mechanism allows to tell
release-monitoring.org what is the name of a package in a given
distribution/build-system. For example, the package xutil_util-macros
in Buildroot is named xorg-util-macros on release-monitoring.org. This
mapping can be seen in the section "Mappings" of
https://release-monitoring.org/project/15037/.
If there is no mapping, then it does a regular search, and within the
search results, looks for a package whose name matches the Buildroot
name.
Even though fetching from release-monitoring.org is a bit slow, using
multiprocessing.Pool has proven to not be reliable, with some requests
ending up with an exception. So we keep a serialized approach, but
with a single HTTPSConnectionPool() for all queries. Long term, we
hope to be able to use a database dump of release-monitoring.org
instead.
From an output point of view, the latest version column:
- Is green when the version in Buildroot matches the latest upstream
version
- Is orange when the latest upstream version is unknown because the
package was not found on release-monitoring.org
- Is red when the version in Buildroot doesn't match the latest
upstream version. Note that we are not doing anything smart here:
we are just testing if the strings are equal or not.
- The cell contains the link to the project on release-monitoring.org
if found.
- The cell indicates if the match was done using a distro mapping, or
through a regular search.
[1] https://release-monitoring.org/distro/Buildroot/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When NetworkManager and dhcpcd packages are both enabled, dhcpcd
services and NetworkManager both spawn dhcpcd. This causes the network
port to retrieve an IP address and later lose it a few seconds after
startup.
This patch prevents dhcpcd services from launching dhcpcd if
NetworkManager is enabled.
Signed-off-by: Jim Brennan <jbrennan@impinj.com>
[Thomas: add a comment in the code to explain the seemingly strange
condition.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add tool which allows to setup broadcom bluetooth
device via UART.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas: add hash for license file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Qt4 has been marked obsolete for close to 1 year, since commit 3538b5fb10
(qt: mark as obsolete) and is no longer supported upstream since December
2015:
https://blog.qt.io/blog/2015/05/26/qt-4-8-7-released/
So now finally remove it as the in tree users have been removed.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Qt4 support is about to be dropped, so remove the support from qwt as well.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Qt4 support is about to be dropped, so remove the support from quazip as
well.
Also add an explicit depends on for qt5 for consistency with other packages.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Qt4 support is about to be dropped, so remove the support from qjson as
well.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Arnout: also remove redundant BR2_STATIC_LIBS dependency/comment]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Qt4 support is about to be dropped, so remove the support from
qextserialport as well.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Qt4 support is about to be dropped, so remove the support from libmediaart
as well.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
