Commit Graph

16 Commits

Author SHA1 Message Date
Peter Korsgaard
7c4d983628 boot: add s500-bootloader package
This is the first level bootloader for the Actions Semiconductor S500 SoC,
which is used on boards like Roseapple Pi and LeMaker Guitar.

The bootloader performs basic configuration and chain loads u-boot for
futher setup.

This bootloader is unfortunately only available as a binary blob. It gets
configured for a specific board using a binary (32bit x86) tool based on a
.ini file (somewhat similar to sunxi .fex).

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-05-26 10:35:34 +02:00
Lee Jones
70c26b8c53 afboot-stm32: new package
This is a _very_ small bootloader for STM32 platforms.

At submission afboot-stm32 supports the following boards:

  stm32429i-eval
  stm32746g-eval
  stm32f429i-disco
  stm32f469i-disco

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: fix commit title, add dependency on BR2_arm.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-02-22 23:23:17 +01:00
Thomas Petazzoni
7961d45c24 gummiboot: new package
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Christophe Vu-Brugier <cvubrugier@yahoo.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2014-02-19 23:28:35 +01:00
Thomas Petazzoni
c24fdb3680 grub2: add new package
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2014-02-19 23:28:04 +01:00
Jerzy Grzegorek
3033bc0c6e package: remove the empty trailing line(s)
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2014-01-04 10:39:29 +01:00
Thomas Petazzoni
7689b72e00 boot-wrapper-aarch64: new package
The boot wrapper contains both a minimal bootloader and a tool to
generate an image suitable for execution by the AArch64 software
simulator. The image generated embeds the minimal bootloader, the
kernel image, the Device Tree Blob and the kernel command line.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2012-11-02 21:10:18 +01:00
Simon Dawson
ca0d69c61c at91bootstrap3: new package
Note that this new package, at91bootstrap3, is being added alongside the
existing at91bootstrap. This was suggested by Thomas Petazzoni, whose
comments on the mailing list are quoted below.

  For this package, I am not sure we can do a simple version bump. Since
  there is (was?) no upstream for AT91Bootstrap 1.x, many
  vendors/companies had to maintain their patches on top of AT91Bootstrap
  1.x. See for example
  board/calao/usb-a9263/at91bootstrap-1.16-usb-a9263.patch. Therefore,
  removing AT91Bootstrap 1.x from the tree will prevent those platforms
  to work. I know people should upgrade, but AT91Bootstrap 3.x is quite
  significantly different, so the porting effort is not that simple.

  Therefore, I'm wondering whether we should kee at91bootstrap as it is,
  and create a separate package at91bootstrap3 for the 3.x generation.

Signed-off-by: Simon Dawson <spdawson@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2012-08-17 17:58:16 +02:00
Maxime Ripard
2a636d1521 Add MXS bootlets package
MXS platforms (imx23 and imx28) are relying on bootlets as their first
stage bootloaders, that can then either start a regular second stage
bootloader or directly a Linux kernel. However, the Makefile allows
only to build u-boot and linux images at the same time, which is
not very convenient as we will more likely use only one of them,
so we need to duplicate a bit what is already done so that we are able
to choose what we want to generate.

thomas.petazzoni@free-electrons.com:

 * Remove incorrect dependency on BR2_PACKAGE_ELFTOSB

 * Each board configuration option is for one board, not multiple
   boards, so use singular.

 * The i.MX28 support is for i.MX28 EVK only, reflect that in the
   option prompt and the option name.

 * Use 'generic-package' instead of GENTARGETS

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2012-07-21 00:34:57 +02:00
Alexandre Belloni
20695936ad lpc32xx: Add CDL to the available bootloaders
This will build kickstart and s1l for the selected board and install
them alongside u-boot.

Signed-off-by: Alexandre Belloni <abelloni@adeneo-embedded.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2012-02-01 23:30:44 +01:00
Alexandre Belloni
14b600203b boot: Reorder entries alphabetically
Signed-off-by: Alexandre Belloni <abelloni@adeneo-embedded.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2012-02-01 23:30:22 +01:00
Philippe Reynes
2269dfa356 Add x-loader bootloader
Signed-off-by: Philippe Reynes <tremyfr@yahoo.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

merge xloader
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2011-07-11 23:41:29 +02:00
Thomas Petazzoni
a4ca959321 u-boot: rename to uboot
This will allow to match the currently Config.in option
BR2_TARGET_UBOOT, in order to make it easy to integrate U-Boot into
the package infrastructure.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2011-07-11 23:39:52 +02:00
Thomas Petazzoni
a5dc0cdced grub2: remove package
Grub 2 has been marked BROKEN in June 2010, and nobody cared to fix it
since then.

At that time, it was marked broken because the build process needed a
Ruby interpreter available on the host, and it's really a pain that
building a bootloader needs such a thing.

I've tried to upgrade the package to Grub2 1.99-rcX, and now it does
not need a Ruby interpreter anymore, but instead requires a tool
called "autogen", which itself needs the Guile Scheme interpreter.

Since we haven't heard any complaints about Grub2 being marked broken,
and since it's such a pain to package, let's get rid of it. Of course,
anybody interested in Grub2 is invited to contribute a working
package.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2011-07-10 15:31:16 +02:00
Thomas Petazzoni
6cc9d936a9 Add support for the Barebox bootloader
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-06-12 16:03:24 +02:00
Thomas Petazzoni
afd77256c9 yaboot: drop support
Yaboot does not build, hasn't been updated since a long time, and
isn't very common these days on embedded PowerPC platforms.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-06-10 21:05:12 +02:00
Thomas Petazzoni
649b5b9250 bootloaders: move bootloader build code to boot/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-06-10 21:05:12 +02:00