Commit Graph

418 Commits

Author SHA1 Message Date
Ezequiel Garcia
828c4ab06c configs/beaglebone: Add missing genimage.cfg file
Commit 7d0b7d3c27 ("configs/beaglebone: Use genimage
to produce the SD card image") introduce genimage usage,
but forgot to add the genimage config file. Fix it.

Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-06-07 21:31:08 +02:00
Ezequiel Garcia
7d0b7d3c27 configs/beaglebone: Use genimage to produce the SD card image
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
[Thomas: added host dosfstools to the defconfig, needed to build a SD
card image with genimage when a FAT partition is listed in the
genimage configuration.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-06-06 22:38:19 +02:00
Vincent Stehlé
7bdbee2311 configs/minnowboard_max: bump kernel to 4.6.1
Also, rebase kernel config and adapt kernel command line in grub config file
to follow mmc numbering change.

[Peter: drop now unused linux-4.4.config]
Signed-off-by: Vincent Stehlé <vincent.stehle@intel.com>
Cc: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-06-06 21:39:06 +02:00
Joao Pinto
f3106fd611 configs/arm_juno: adding CMA support to the kernel
This patch adds CMA to the juno's default kernel config that is in
board/arm/juno. This is critical if the user decides to config video
resolution to 1920x1080.

Signed-off-by: Joao Pinto <jpinto@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-06-03 20:08:45 +02:00
Gustavo Zacarias
4e4545246f configs/pc_x86_64_{bios, efi}_defconfig: new samples
Add two new sample defconfigs oriented towards real PC targets.

It adds two variants for BIOS and EFI boot strategy.

On the build side we enable eudev to autoload relevant kernel
modules/support when necessary.

It adds a bunch of drivers and extra filesystem support which is by no
means extensive/complete, mostly geared towards the hardware i've got at
hand to test with.
This is accomplished by adding on top of the Qemu x86_64 kernel sample
config.

Build connman since by using eudev network interfaces get renamed on
boot thus complicating any form of automatic and friendly bringup.
It also makes Wi-Fi configuration/support easier.

In principle these base defconfigs should work just fine for other
storage media != pendrive like sata or ssd disk, however driver support
isn't there quite yet, and pendrive is mostly supported by usb storage
plus the usual usb host controller drivers.

Tested on old Lenovo laptop (BIOS) and Asus Zenbook (EFI).

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-06-03 20:02:08 +02:00
Fabio Estevam
ee1ea82116 imx53loco: Fix post-image.sh permission
Fix post-image.sh permission to avoid the following error:

>>>   Executing post-image script board/freescale/imx53loco/post-image.sh
/bin/bash: board/freescale/imx53loco/post-image.sh: Permission denied

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-06-03 09:50:35 +02:00
Peter Korsgaard
577021e81b Merge branch 'next'
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-06-01 17:55:16 +02:00
Fabio Estevam
dd2e328089 configs: mx53loco: use genimage to generate sdcard image
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-05-31 21:27:47 +02:00
Fabio Estevam
88c514a56a configs: mx53loco: Update bootloader and kernel versions
Update U-boot to the 2016.05 version and the kernel to 4.6.

U-boot 2016.05 needs the patch c510f2e436008 ("video: ipu_common: fix build
error") that is already in mainline to fix an IPU build error.

We can remove this patch in the future when we switch to U-boot 2016.07.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-05-31 21:26:55 +02:00
Fabio Estevam
0a2d57596e warpboard: README: Fix a few typos
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-05-30 09:33:43 +02:00
Peter Korsgaard
9cacb5be84 boards: add roseapple pi board support
Add basic support for the roseapple pi board, a SBC in a RPI form factor
with an Actions Semiconductor S500 SoC. For details, see:

http://roseapplepi.org/

The vendor kernel unfortunately needs a minor patch to build the XHCI
driver, so include it here.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-05-26 10:35:55 +02:00
Fabio Estevam
35a24c6f0f post-image: Do not hardcode the genimage.cfg path
Instead of hardcoding the genimage.cfg path, let's add a BOARD_DIR
variable to improve readability.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-05-13 22:36:09 +02:00
Fabio Estevam
205f80b894 configs: new configuration for NXP i.MX7 SabreSD
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-05-13 22:01:01 +02:00
Fabio Estevam
602c76cb8b imx6ulevk: readme: Update the rootfs type to ext4
Since commit 2f37ef48e8 ("configs/imx6ulevk: Use ext4 as filesystem type")
the rootfs type is ext4, so update the readme.txt accordingly.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-05-11 22:22:02 +02:00
Waldemar Brodkorb
cc72cf2ca6 m68k: fix open issues with qemu coldfire
Enable kernel drivers for networking and add a simple
busybox config with basic network tools.

Add kernel patch from Linux git to fix hush segfaults while
using signal handler.

Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-05-11 15:27:15 +02:00
Yann E. MORIN
ee50eb8ad3 boards/raspberrypi0: new board
Add support for the rpi-0, which is basically a rpi (model A+) in a
smaller form-factor.

This one does not have an ethernet port, so we just remove it from the
configuration (or we could use the existing rasbperrypi_defconfig and
suffer from a longer boot time because of the waiting for eth0).

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-05-08 15:54:30 +02:00
Fabio Estevam
2f37ef48e8 configs/imx6ulevk: Use ext4 as filesystem type
Extend the filesystem type to ext4.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-05-08 15:01:52 +02:00
Julien BOIBESSOT
e994eaeaab board: add a readme for Armadeus boards
Common readme.txt for all supported Armadeus boards.

Signed-off-by: Julien BOIBESSOT <julien.boibessot@armadeus.com>
[Thomas: minor tweaks in the readme.txt]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-05-06 15:13:15 +02:00
Gustavo Zacarias
23cc2cfbf9 configs/freescale_mpc8315erdb: bump to kernel 4.5.3
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-05-05 22:19:11 +02:00
Gustavo Zacarias
fe475a5940 configs/qemu: bump to the latest version
Results table:

Defconfig               Kernel          Qemu        Network Status
------------------------------------------------------------------
aarch64_virt            4.5.3           2.5.0         YES     OK
arm_versatile           4.5.3           2.5.0         YES     OK
arm_vexpress            4.5.3           2.5.0         YES     OK
m68k_mcf5208            4.5.3           2.5.0         NO      SO-SO (3)
m68k_q800               4.5.3           q800-v2.4.0   NO (4)  OK
microblazebe            4.5.3           2.5.0         YES     OK
microblazeel            4.5.3           2.5.0         YES     OK
mips64el_malta          4.5.3           2.5.0         YES     OK
mips64_malta            4.5.3           2.5.0         YES     OK
mipsel_malta            4.5.3           2.5.0         YES     OK
mips_malta              4.5.3           2.5.0         YES     OK
ppc_g3beige             4.5.3           2.5.0         YES     OK
ppc_mpc8544ds           4.5.3           2.5.0         YES     OK
ppc_virtex_ml507        4.5.3           2.5.0         NO      OK
ppc64_pseries           4.5.3           2.5.0         YES     OK
sh4                     4.5.3           2.5.0         YES     OK
sh4eb                   4.5.3           2.5.0         NO (1)  OK
sparc_ss10              4.5.3           2.5.0         YES     OK
sparc64_sun4u           4.5.3           2.5.0         YES     OK
sparc_sun4u             4.5.3           2.5.0         YES     OK
x86                     4.5.3           2.5.0         YES     OK
x86_64                  4.5.3           2.5.0         YES     OK
xtensa_lx60             4.4.9           2.5.0         YES (2) OK
xtensa_lx60_nommu       4.4.9           2.5.0         YES (2) OK

(1) - Probably an endian issue with 8139 emulation/driver
(2) - xtensa ethernet broken in 4.5
(3) - It boots, you can login, but apps exit/crash often
(4) - There's a network interface, but enabling it in qemu fails

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-05-05 15:41:32 +02:00
Waldemar Brodkorb
644d020b65 board: add qemu coldfire support
Add kernel config and defconfig for Qemu Coldfire.

Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-04-30 18:50:46 +02:00
Waldemar Brodkorb
5e1b132495 move busybox-minimal.config to be used by other noMMU targets
Config can be used by other noMMU targets as qemu-system-m68k
with coldfire emulation.

Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-04-30 15:28:32 +02:00
Gustavo Zacarias
f282b13a27 qemu/x86*: update instructions to use virtio
Switch the invocation command to use virtio-blk and virtio-net for
better performance.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-04-30 14:58:10 +02:00
Gustavo Zacarias
51501c0e85 qemu/x86*: enable virtio for kernel config
It has better performance for block and net.
Enable virgl (DRM_VIRTIO_GPU) support for 3D acceleration.
And also DRM_BOCHS for better stdvga acceleration.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-04-30 14:56:34 +02:00
Gustavo Zacarias
1f85a91221 qemu/x86: use symlinked kernel config
It's exactly the same as the x86_64 variant so just create a symlink.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-04-30 14:56:27 +02:00
Ubaldo Porcheddu
b159b15d07 configs: add Raspberry Pi 3 defconfig
So far identical to the rpi2 one except for the dts file as the SW runs in
32bit mode.

[Peter: extend commit message]
Signed-off-by: Ubaldo Porcheddu <ubaldo@eja.it>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-04-25 14:07:58 +02:00
Brian Kim
ff5ea2f636 board: add support for Hardkernel ODROID-C2 Board
The ODROID-C2 is a 64-bit quad-core single board computer(SBC) that is
one of the most cost-effective 64bit development boards available in the
ARM world.

http://www.hardkernel.com/main/products/prdt_info.php?g_code=G145457216438

[Peter: fix typos, drop neon/C++ settings, use git hash for Linux/U-Boot]
Signed-off-by: Brian Kim <brian.kim@hardkernel.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-04-23 22:15:44 +02:00
Damien Riegel
56047fa97d board: rename ts to technologic
Other projects, such as Linux [1] and U-Boot [2], use "technologic" for
this manufacturer. To be more consistent across all of them, rename the
board/ts folder to board/technologic.

[1] https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/vendor-prefixes.txt
[2] http://git.denx.de/?p=u-boot.git;a=tree;f=board/technologic;hb=HEAD

Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-04-21 23:06:08 +02:00
Luca Ceresoli
babf1190b3 raspberrypi, raspberrypi2: document the two consoles (UART+HDMI)
The defconfigs for the Raspberry Pi boards start a console on HDMI in
addition to the classic one on UART. Document this feature in the
readme.

Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-04-19 00:12:23 +02:00
Ezequiel García
e25c603211 board/minnowboard-max: Add a X-based graphical defconfig
This commit adds a new defconfig to build a X-based
graphical system for the Minnowboard MAX board.

  * The 'openbox' windows manager is chosen because it's simple
    and lightweigth.

  * Basic X apps are enabled (such as xrandr, xterm), so we
    can at least get a console and change video mode.

  * ALSA default configuration is provided, so HDMI audio
    works out-of-the-box.

  * OpenGL is supported.

Tested on Minnoboard Turot (which is Minnowboard Max compatible).

[Peter: drop unneeded/specific toolchain config options]
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-04-18 23:19:25 +02:00
Ezequiel García
2fbd5b1f04 board/minnowboard-max: Add more peripherals and features to the kernel
This commit enables support for:
  * HDMI audio
  * Support for user-provided EDID firmware
    (useful to workaround broken monitors)
  * Evdev interface
  * System V IPC (required by ALSA)

The options make the system more useful.

Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-04-18 23:19:25 +02:00
Ezequiel García
5c084e9519 board/minnowboard: Unify Minnowboard and Minnowboard MAX boards
Given Minnowboard and Minnowboard MAX boards are very similar,
it's desirable to unify the support for them.

This commit does the following:

  1) Remove Minnowboard MAX's genimage.cfg, post-build.sh
     and post-image.sh. These are identical to Minnowboard's.

  2) Move Minnowboard MAX's linux config, and rename it.

     It would be lovely to have a single kernel config file.
     The kernel size penalty involved in adding support for
     all the peripherals on both boards is small enough to
     justify this.

     However, the original Minnowboard has some GPIO buttons
     that need to be registered by the kernel. This is not
     upstreamed, and hence we need to use the yocto v3.8 kernel
     to have this support.

  3) Rename each grub config to grub-{board}.cfg.

  4) Modify (the now unique) post-build script to use
     a different grub config, according to the board.

  5) Update both defconfigs, as per the above changes.

  6) Finally, update the readme.txt.

[Peter: mention MAX in readme title]
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-04-18 23:19:25 +02:00
Ezequiel García
54ec0e2a74 board/minnowboard: Rework to generate SD card image
Let's rework the board and config files to use genimage
to generate the SD card image directly.

Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-04-18 23:19:25 +02:00
Max Filippov
20e738bc3f configs: add qemu_xtensa_lx60_nommu_defconfig
Add noMMU configuration running on dc233c MMUv3 core with identity
memory map.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-04-18 21:25:38 +02:00
Max Filippov
8f82d0185b configs/qemu_xtensa_lx60_defconfig: switch to dc233c
dc232b is MMUv2 core, dc233c is very similar MMUv3 core. MMUv3 is the
latest full MMU for xtensa, which allows running both MMU and noMMU
linux variants.
Update configuration overlay and linux config file.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Tested-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-04-18 21:25:16 +02:00
Luca Ceresoli
20878a1017 raspberrypi, raspberrypi2: add a serial console
The current Buildroot defconfigs for Raspberry Pi and Raspberry Pi 2
instantiate a console on tty1, which appears on HDMI. Add a console on
the serial port (ttyAMA0) to be more consistent with other defconfigs
and provide a better out-of-the-box experience to users used to have a
serial console from Buildroot defconfigs.

This requires three changes:
 1. have two 'console=' entries in the kernel command line: tty1,
    then ttyAMA0;
 2. change BR2_TARGET_GENERIC_GETTY_PORT to "console", so it starts
    a getty on the last console= passed to the kernel, ttyAMA0;
 3. add a new getty on tty1 to the generated inittab.

Step 2 is actually obtained by removing BR2_TARGET_GENERIC_GETTY_PORT
entirely from the defconfigs, since "console" is the default value.

Step 3 requires a post-build script since the Buildroot makefiles can
configure only one console.

Note: instead of simply adding a new getty on ttyAMA0 (which would
work) this patch actually changes BR2_TARGET_GENERIC_GETTY_PORT to
instantiate a console on UART, then adds back tty1 via
post-build.sh. This is done only to avoid the "GENERIC_SERIAL" comment
where we instantiate an HDMI console, then instantiate a really-serial
console on another line.

The result is these two inittab lines:

  console::respawn:/sbin/getty -L  console 0 vt100 # GENERIC_SERIAL
  tty1::respawn:/sbin/getty -L  tty1 0 vt100 # HDMI console

Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-04-18 13:36:11 +02:00
Lee Jones
04d0a5793f configs/stm32f469_disco: new configuration for STM32F469 Discovery board
Similar to stm32f429_disco, this commit adds a configuration for the
Cortex-M4 based STM32F469 platform.

It requires a few kernel patches, which have already been submitted
upstream, as well as a small OpenOCD patch. Besides that, it re-uses
most of what has been added for the STM32F429 platform.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
[Thomas:
 - squash multiple patches from Lee Jones into one
 - improve the readme.txt file
 - sync the defconfig with the adaptations made to the stm32f429
   configuration.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-04-16 12:44:07 +02:00
Lee Jones
c8ad46a1a7 configs/stm32f429_disco: new configuration for STM32F429 Discovery board
This commit adds a defconfig for the STM32F429 platform, which is
based on a Cortex-M4 core from ST Microelectronics. It is therefore
the first noMMU ARM platform supported in Buildroot.

This commit includes some files that will be common to several STM32
platforms (hence in board/stmicroelectronics) and some files that are
specific to the STM32F429 (hence in
board/stmicroelectronics/stm32f429-disco). More specifically, this
commit adds:

 - A minimal Busybox configuration, which is small enough to boot
   without causing OOM on such small noMMU platforms. The resulting
   Busybox, statically linked with uClibc-ng, weights around 220
   KB. For now, this file is located in board/stmicroelectronics/, but
   we might consider moving it to package/busybox/ in the future if
   needed.

 - A post-build script that removes the mounting of /dev/pts (not
   enabled in the kernel and not very useful for a system that has no
   network and no X), and removes the network related init script and
   configuration files (no network support).

 - A flash.sh script, to perform the right OpenOCD invocations to
   reflash the board.

 - One small kernel patch to adjust the kernel command line in the
   Device Tree, since it's the only way to do so.

 - The usual readme.txt file.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
[Thomas:
 - squashed multiple patches from Lee Jones together
 - added the minimal Busybox configuration
 - added the post-build script
 - improved the flashing script to not hardcode the location of the
   output directory
 - add the small kernel patch
 - improve the readme.txt file
 - test on HW the resulting image, after using the internal toolchain.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-04-16 12:43:28 +02:00
Ludovic Desroches
ce86f9eaf2 board/atmel: update documentation for SD card generation
Henceforth, a sdcard.img file is automatically generated. It simplifies the
procedure to generate a bootable SD card for Atmel Xplained boards.

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-04-13 23:47:48 +02:00
Ludovic Desroches
89155c8492 configs: atmel: add sama5d3 xplained sd card image generation
Use genimage to generate a sd card with a fat partition (at91bootstrap,
u-boot, kernel, dtbs) and an ext4 partition (rootfs).

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-04-13 23:47:44 +02:00
Ludovic Desroches
6e9bd4a2bc configs: atmel: add sama5d4 xplained sd card image generation
Use genimage to generate a sd card with a fat partition (at91bootstrap,
u-boot, kernel, dtbs) and an ext4 partition (rootfs).

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-04-13 23:47:42 +02:00
Ludovic Desroches
7aca6ab788 configs: atmel: add sama5d2 xplained sd card image generation
Use genimage to generate a sd card with a fat partition (at91bootstrap,
u-boot, kernel, dtbs) and an ext4 partition (rootfs).

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-04-13 23:47:37 +02:00
Ezequiel García
e88c82f30d board/minnowboard-max: Rework to generate SD card image
Let's rework the board and config files to use genimage
to generate the SD card image directly.

[Peter: add host-mtools for genimage vfat handling]
Signed-off-by: Ezequiel García <ezequiel@vanguardiasur.com.ar>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-04-13 23:06:36 +02:00
Masahiro Yamada
c13f896686 configs: rename Zynq defconfig files
These three are Zynq boards and the build procedure is almost the
same.  Having the SoC name prefix "zynq_" would be more consistent.
Also, this is the way in which the Linux Device Trees and the U-Boot
configuration files do.

This commit renames as follows:

   zedboard_defconfig     -> zynq_zed_defconfig
   microzed_defconfig     -> zynq_microzed_defconfig
   xilinx_zc706_defconfig -> zynq_zc706_defconfig

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-03-31 18:40:43 +02:00
Gustavo Zacarias
fdc5f301f8 configs/qemu: enable modules for x86 and x86_64
It's useful for demo configs which have more features, like
automatically loaded (module) drivers.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-03-29 03:01:44 +02:00
ludovic.desroches@atmel.com
358013d699 board/atmel: merge and update documentation
There were two readme files (one for flashing on NAND and one to create a
SD card) in different places. Merge them and update the SD card
generation part since all Xplained boards are supported and the -u
option of sfdisk is obsolete on latest versions.

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
[Thomas: adjust the explanations, move the SD card section after the
NAND flash section.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-03-24 23:09:04 +01:00
Jan Viktorin
0be56dca27 altera: remove whitespace before colon
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-03-22 23:59:36 +01:00
Jan Viktorin
1039811491 altera: improve readme to cover both supported boards
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-03-22 23:47:06 +01:00
Waldemar Brodkorb
3f69339211 qemu-m68k: add new board
Ethernet is not working, but at least you get a shell and
can test applications for m68k.

Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-03-20 15:28:55 +01:00
Gustavo Zacarias
de5906a384 configs/qemu: bump to the latest linux versions
arm_versatile kernel defconfig updated to deal with multi-platform ARM
support and driver changes.

mips(el) 32-bits is back in working order for 4.5

Results table:

Defconfig               Kernel          Qemu    Network Status
--------------------------------------------------------------
aarch64_virt            4.5             2.3.0   YES     OK
arm_versatile           4.5             2.3.0   YES     OK
arm_vexpress            4.5             2.3.0   YES     OK
microblazebe            4.5             2.3.0   YES     OK
microblazeel            4.5             2.3.0   YES     OK
mips64el_malta          4.5             2.3.0   YES     OK
mips64_malta            4.5             2.3.0   YES     OK
mipsel_malta            4.5             2.3.0   YES     OK
mips_malta              4.5             2.3.0   YES     OK
ppc_g3beige             4.5             2.3.0   YES     OK
ppc_mpc8544ds           4.5             2.3.0   YES     OK
ppc_virtex_ml507        4.5             2.3.0   NO      OK
ppc64_pseries           4.5             2.3.0   YES     OK
sh4                     4.5             2.3.0   YES     OK
sh4eb                   4.5             2.3.0   NO (1)  OK
sparc_ss10              4.5             2.3.0   YES     OK
sparc64_sun4u           4.5             2.3.0   YES     OK
sparc_sun4u             4.5             2.3.0   YES     OK
x86                     4.5             2.3.0   YES     OK
x86_64                  4.5             2.3.0   YES     OK
xtensa_lx60             4.4.5           2.3.0   YES (2) OK

(1) - Probably an endian issue with 8139 emulation/driver
(2) - xtensa ethernet broken in 4.5 so stick to 4.4.x

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-03-14 22:14:56 +01:00