We only documented a few of the <package>- targets and it's hard to
decide which ones are relevant for make help. Since the help is already
way too long, it's better to remove these advanced targets.
Instead, let's refer to the online manual.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, the only way br2-external may generate a document is by
including that document's recipe from within external.mk.
But external.mk is only parsed when the tree is configured.
This is unlike our internal document (the manual) which can be generated
from within an unconfigured tree.
So, include the documents from br2-external at the same time we include
our own document:
- expect the same layout as we have: docs/DOC_NAME/doc-name.mk
- do not fail if there is no document: use "-include", not "include"
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Samuel Martin <s.martin49@gmail.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Rename the GENDOC infrastructure so that it more closely matches the way
we handle the packages infras.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Samuel Martin <s.martin49@gmail.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Move the GENDOC infra to its own file, so it is even less tied to our
manual document, so that it is more obvious that GENDOC is an infra like
our packages infras, and 'manual' is a document like we have packages.
Ideally, this new file should better go in docs/ rather than in package/ .
However, docs/ is already full of our website stuff, so adding it in
there would just serve to clutter the website.
So, let's just put alongside the other infrastructures, in package/ .
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Samuel Martin <s.martin49@gmail.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In the coming patch, we are going to change the order in which our rules
are defined, because we include the gendoc infra before we define the
'all:' rule, so we need to decalre the 'all:' rule before we include
gendoc.
Declare it very, very early in the Makefile, so it always kick in first.
The actual dependency is still declared much later, all that counts is
that "all:" is first.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Due to excessive parenthesis, the TARGETS_LEGAL_INFO expression was
evaluated to something like this:
toolchain-legal-info toolchain-external-legal-info busybox-legal-info zlib-legal-info))
Yes, with the last two parenthesis. This had the effect that the
zlib-legal-info rule was never called: the last package of $(TARGETS)
$(TARGET_HOST_DEPS) $(HOST_DEPS) was never added in the legal-info
information.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Since the removal of py/pyc files is Python-specific, this commit
moves the logic removing those files to python.mk and python3.mk
respectively.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, pkg-utils.mk (included via package/Makefile.in) is only included
when a configuration file already exists. This means that none of the
utilities it defines are available without .config.
In particular:
- the MESSAGE macro, causing pretty build output. Since some make targets
can be run even without .config, like 'make manual', not having this
pretty printing is odd.
- pkgname, pkgdir: in a subsequent patch, these functions will be used for
the generation of the manual, and since this should work also without
.config, we need these functions to be available.
This patch moves the include of pkg-utils.mk from package/Makefile.in to
Makefile, outside of the check for .config.
This is a quick fix. The full solution involves to minimize the amount of
Makefile code that is guarded by a check on .config. This approach will be
taken in the 2014.11 release cycle.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: fix commit title, use one line for both CONF_OPT options.]
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The gconv libraries are used to translate between different character sets
('charsets', even 'csets' sometimes). Some packages need them to present
text to the user (eg. XBMC Gotham).
In (e)glibc they are implemented by the internal implemenation of iconv,
called gconv, and are provided as dlopen-able libraries.
Note that some gconv modules need extra libraries (shared by more than
one gconv module), so we must, when adding a subset of modules, scan the
installed modules in search of the missing libraries.
[Thomas: add general explanation in expunge-gconv-modules and fix
coding style.]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Cc: Eric Limpens <limpens@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
I would like to propose adding the site to the legal-info manifest
files. This gives a little more information on where the sources came
from without adding much overhead. Please note that is is only for
packages where the source is not local or set with OVERRIDE_SRCDIR.
Signed-off-by: Clayton Shotwell <clayton.shotwell@rockwellcollins.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The rules to purge unwanted locales from the target also removed
the locale-archive file from /usr/lib/locale which contains the
locale definitions explicitly generated for the target.
Signed-off-by: Sven Neumann <neumann@teufel.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove the rule that adds common dependencies to every target in the
"TARGETS" variable, because all those targets are packages that use the
package infrastructure or they depend on targets that use the package
infrastructure. The package infrastructure already adds common
dependencies. Therefore, this rule is useless.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For consinstency sake convert the "target-generatelocales" rule to a
TARGET_FINALIZE_HOOKS hook.
Signed-off-by: Fabio Porcedda <fabio.porcedda@telit.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For consinstency sake convert the "toolchain-eclipse-register" to a
TARGET_FINALIZE_HOOKS hook.
Signed-off-by: Fabio Porcedda <fabio.porcedda@telit.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add TARGET_FINALIZE_HOOKS to the "target-finalize" rule to be able to
add to it commands as needed.
This is useful for having a nicer output because commands are executed
after the "target-finalize" initial message, also it is useful to ensure
an executing order even when top-level parallel makefile is being used.
Also convert "TARGET_PURGE_LOCALES" to a hook that uses
"TARGET_FINALIZE_HOOKS".
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The graph-depends commands cd into the CONFIG_DIR and run the script
from there. However, this means that when $(O) is a relative path, it
will no longer be correct. Therefore, use $(BASE_DIR) instead of $(O).
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To be able to check the "dot" command availability in
"<pkg>-graph-depends" move the check to the "graph-depends-requirements" rule.
Also don't use a subshell for the exit command to be sure that the error
will be returned by the shell.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The 'graph-depends' logic uses the 'dot' program from Graphviz to draw
the dependency graph, but it doesn't check its existence before
starting the generation of the graph, which can lead to user confusion
as reported in:
http://lists.busybox.net/pipermail/buildroot/2014-June/099278.html
With this commit, we first test if the 'dot' program is available, and
if it's not, we error out with a clear error message:
$ make graph-depends
ERROR: The 'dot' program from Graphviz is needed for graph-depends
make: *** [graph-depends] Error 1
[Peter: send error message to stderr instead]
Reported-by: Dallas Clement <dallas.a.clement@gmail.com>
Cc: Dallas Clement <dallas.a.clement@gmail.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
$(TARGET_DIR)/usr/lib/perl5/$(PERL_VERSION)/$(PERL_ARCHNAME)/CORE contains include files.
*.bs & .packlist files come with perl or perl/cpan packages.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Kids nowaday seem to prefer a left-to-right drawing rather than the
more conventional and historical top-down drawing.
Rather than multiply the number of environment variables, just add
a single one where the user can pass arbitrary dot options, such as:
make BR2_GRAPH_DOT_OPTS=-Grankdir=LR graph-depends
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The correct capitalised form appears to be "BusyBox" rather than "Busybox";
fix all references to the latter form. (Most such references occur in the
manual and in commentary in package makefiles.)
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This enables powerpc64 and powerpc64le. Currently, le needs at least
glibc 2.19 and gcc 4.9.0. For gdb, 7.7.1 works (added in an earlier
patch).
[Peter: also disallow gcc 4.8 for ppc64le]
Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch adds support for powerpc64le-linux-gnu. This includes
needed patches to fakeroot and gmp.
gmp patch is from upstream HG tree.
fakeroot patch is from Ubuntu written by Adam Conrad.
Signed-off-by: Jeff Bailey <jeffbailey@google.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The file external.mk was included before fs/common.mk, so it was impossible
to add rootfs targets using the BR2_EXTERNAL mechanism.
This change moves the inclusion of fs/common.mk before external.mk to allow
this.
Signed-off-by: Philippe Reynes <tremyfr@yahoo.fr>
[ThomasDS: rebased, update commit message]
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
There will soon be new options to the graph-depends script, which we
can only sanely pass via environment variables.
Currently, we use such an environment variable to pass the maximum depth
of the dependency graph; the name of that variable is explicit that it
contains just the depth.
However, there has been so far no release of Buildroot which would make
use of that variable, so no user should have come to rely on it.
Rename that variable so it is less specific, and more generic, so it can
be used to pass more options to graph-depends.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The target-finalize target does a large number of actions (removing
unnecessary files, stripping objects, etc.) but does not have a header. This
makes it seem that all these actions are done as part of the last action
before target-finalize, for example:
>>> makedevs undefined Installing to target
To make a clear distinction, add a message to the beginning of
target-finalize:
>>> Finalizing target directory
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The "target-purgelocales" target must be executed after all the other
targets and before the "target-finalize" target, so create a
TARGET_PURGE_LOCALES variable containing the commands of the target
"target-purgelocales" and add it at the beginning of the
"target-finalize" target.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
If a kernel module is installed with incorrect permissions (0755 iso 0644),
it would get stripped in a way that would render the kernel module broken.
While the incorrect permissions are a developer error, it is a minor change
to prevent this mistake from causing incorrectly stripped modules.
This was reported with bug #6992:
https://bugs.busybox.net/show_bug.cgi?id=6992
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Because the "show-targets" target print the targets that will be built,
print also their dependencies.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As stated in the buildroot user manual add just a single space before
and after a '=' sign.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The target depends on the toolchain so add it as a dependency.
This also fix the support to top-level parallel make.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The "toolchain-eclipse-register" target needs the toolchain so add
toolchain as a dependency.
This also fix the support to top-level parallel make.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
