This should have been BR2_TARGET_ROOTFS_EXT2 as the
BR2_TARGET_ROOTFS_EXT2_GEN variable is an integer variable used
to indicate the ext2/ext3/ext4 variant.
Fixes:
- http://autobuild.buildroot.net/results/5d7/5d7833212bd8a2b575945f848d8c91dabe7d3c30
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Until commit "arch/Config.in.sh: fixup MMU selection" in this series,
SH2A could either be used with BR2_USE_MMU disabled or BR2_USE_MMU
enabled.
The later made absolutely no sense, since SH2A does not have a MMU:
MMU support was introduced starting from SH3 according to
https://en.wikipedia.org/wiki/SuperH#SH-3
Also, since commit 22d5501e03 ("arch:
tidy up binary formats config"), which was merged in Buildroot
2015.05, the architecture tuple used when BR2_sh2a=y and BR2_USE_MMU
disabled is sh2a-buildroot-uclinux-uclibc, and this was already
unsupported back in the days of Buildroot 2015.08 and binutils 2.24,
causing the build to fail with:
*** BFD does not support target sh2a-buildroot-uclinux-uclibc.
just like it fails to build today with recent version of binutils.
So, this has been broken since 2015.08, and nobody complained. SH2A is
seldom used, so it's time to kill it.
It is worth mentioning that there had been an attempt at resurrecting
SH2 support around 2015 (see https://lwn.net/Articles/647636/) as part
of the J2 core. This effort led to the addition of FDPIC support for
SH2A in the musl C library (and therefore proper ELF binaries, with
shared libraries), but that was never supported in Buildroot. Now that
the J2 project is essentially dead, there is no reason to bother with
this.
Fixes:
http://autobuild.buildroot.net/results/63d01d33ae30f86b63b9f42a9fea116f2f3e9005/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Currently we only test a limited set of toolchains that are mostly
prebuilt, add a flag to allow using randconfig for randomizing
additional toolchain settings instead of randpackageconfig.
To avoid invalid configs we need to add additional config validation
filtering and fixups. Although the loop around 'make randconfig'
attempts does make sure we eventually end up with a valid configuration,
there is a bias towards e.g. disabling the kernel. It would be possible
to e.g. always force BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y, but
that removes the possibility for a toolchains-csv config to add a valid
custom defconfig. (Note that currently this isn't possible anyway since
'make randpackageconfig' is used if a toolchains-csv is provided, but
eventually we want to use 'make randconfig' also if a toolchains-csv is
provided.)
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Some packages only have a home page properly set inside project_urls.
Squelch flake8's E127, because a visual indent here is really nicer.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
[yann.morin.1998@free.fr: simplify getting home_page fallbacks]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
As already done for {FOO}_DEPENDENCIES in commit
4910a175b3, check that {FOO}_CONF_OPTS are
never overridden in a conditional
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Since this is a helper script there is not much reason to show the
command that's been issued. Furthermore, the incantation has been
slightly extended since the script was introduced.
The only interesting reason to print the command is to know what image
it is being spawned into. However, this is prominently displayed by
docker the first time the script is run, as it can't find the image
locally and has to fetch it first. Afterwards, users can still use
'docker image ls' to see what images they have locally.
So let's remove 'set -x' before running docker.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
[yann.morin.1998@free.fr: reword and expand commit log]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Currently, the docker-run script starts a container based on the
reference image, in which the user has UID:GID set to 1000:1000,
which may or may not be the same as local user uses, which may
prevent the commands in the container from creating files, which
foils the plan of using the container to run a build...
Additionally, the paths in the container differ from the paths
the user expects, as the current Buildroot tree is mounted over
the in-container user home directory. This is a bit confusing...
Finally, the container is left hanging around after the command
finishes, and thus there are as many lingering containers as the
user runs docker-run. This is not very nice...
We fix all of that (yeah, should be different patches, but meh):
- we use --mount instead of -v, which allows us to bind-mount
the Buildroot tree at the same place in the container, as
Docker will create the destination if it does not exist, while
-v seems to expect it to exist [0].
- as a consequence, we can also set the working directory as the
Buildroot top-directory;
- use --user to force the same UID:GID in the container as the
local user, so that files created in the container belong to
the local user, and so that files from the local user are
accessible from the container;
- use --rm to remove the container once it terminates; starting
a new container is very quick anyway, so it is as good as
re-using a previous container.
[0] the documentation is not clear about that. It clearly states
that the host directory (i.e. the origin, the source) is created
if missing, but it says nothing of the destination:
https://docs.docker.com/engine/reference/commandline/run/#mount-volume--v---read-only
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Giulio Benetti <giulio.benetti@benettiengineering.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Tested-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Without -i, the container cannot be used interactively. Allow using it as
in:
$ ./utils/docker-run
+ exec docker run -v /home/ceresoli/devel/buildroot:/home/br-user -it registry.gitlab.com/buildroot.org/buildroot/base:20220206.1756
br-user@1e9508a4ccbb:~$ ls
arch board boot CHANGES Config.in Config.in.legacy configs COPYING DEVELOPERS docs fs linux Makefile Makefile.legacy output package README support system toolchain utils
br-user@1e9508a4ccbb:~$
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
/usr/bin/bash does not exist on Ubuntu 2018.04. Use the more portable
alternative "#!/usr/bin/env bash" which we are already using in quite
a few scripts.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Fixes: 242e9d72e7 ("utils/docker-run: new script")
[yann.morin.1998@free.fr: use "#!/usr/bin/env bash", not "@!/bin/bash"]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The option was removed by commit 306839586b (package/python: drop target
package).
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
While committing the shellcheck feature, it was changed to output the
full shellcheck output even at verbosity level 1. However, the
expectation of the shellcheck test was not updated accordingly.
Do that now, simply merging all the shellcheck output in a single
string.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
For simplicity, when shellcheck returns one or more warnings, count it
as a single check-package warning.
The developer can get the full output either by running shellcheck
directly or by calling check-package with -v.
Examples:
|$ ./utils/docker-run utils/check-package --include Shellcheck package/polkit/S50polkit
|package/polkit/S50polkit:0: run 'shellcheck' and fix the warnings
|51 lines processed
|1 warnings generated
|$ ./utils/docker-run utils/check-package --include Shellcheck -v package/polkit/S50polkit
|package/polkit/S50polkit:0: run 'shellcheck' and fix the warnings
|In package/polkit/S50polkit line 43:
|< tab >start|stop|restart|reload)
| ^----^ SC2221: This pattern always overrides a later one on line 45.
|In package/polkit/S50polkit line 45:
|< tab >reload)
| ^----^ SC2222: This pattern never matches because of a previous pattern on line 43.
|For more information:
| https://www.shellcheck.net/wiki/SC2221 -- This pattern always overrides a l...
| https://www.shellcheck.net/wiki/SC2222 -- This pattern never matches becaus...
|51 lines processed
|1 warnings generated
NOTICE: shellcheck results depends on the version of the tool.
This is why the examples above run inside the docker image.
Also update .gitlab-ci.yml with the docker image after the change of
the previous commit. We don't actually use shellcheck in CI, but the
image from .gitlab-ci.yml is used by the docker-run script and we use
that to run shellcheck.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
[Arnout: make sure a single -v is enough to get shellcheck output;
update docker image tag in .gitlab-ci.yml]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Enable the common checks:
- consecutive empty lines
- empty last line
- missing new line at end of file
- trailing space
- warn for executable files, with the hint to instead use
'$(INSTALL) -D -m 0755' in the .mk file
Check indent with tabs:
- add a simple check function to warn only when the indent is done
using spaces or a mix of tabs and spaces. It does not check indenting
levels, but it already makes the review easier, since it
diferentiates spaces and tabs.
Check variables:
- check DAEMON is defined
- when DAEMON is defined, check the filename is in the form S01daemon
- when PIDFILE is defined, expect it to be in /var/run and defined
using $DAEMON.
Also add unit test for this.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
[Arnout: avoid 'del NotExecutable_base' by importing the module instead
of the class; refer to manual in warnings]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Currently there are no .mk, Config.in, .patch or .hash files with
executable permissions in the tree.
But we don't want to have that.
So warn when a file checked by check-package has executable permission.
This check will be reused when testing SysV init scripts in the tree.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
[Arnout: use context manager for temp dir so it gets deleted]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Some file formats have well-established syntax checkers.
One example of this is the tool 'shellcheck' that can analyse shell
scripts for common mistakes.
There is no reason to reimplement such tools in check-package, when we
can just call them.
Add the ability to check-package to call external tools that will run
once for each file to be analysed.
For simplicity, when the tool generated one or more warnings, count it
as a single warning from check-package, that can display something like
this:
|$ ./utils/check-package package/unscd/S46unscd
|package/unscd/S46unscd:0: run 'shellcheck' and fix the warnings
|25 lines processed
|1 warnings generated
|$ ./utils/check-package -vvvvvvvvvvvvvvvv package/unscd/S46unscd
|package/unscd/S46unscd:0: run 'shellcheck' and fix the warnings
|In package/unscd/S46unscd line 9:
| printf "Starting ${NAME}: "
| ^------------------^ SC2059: Don't use variables in the printf format string. Use printf "..%s.." "$foo".
|In package/unscd/S46unscd line 11:
| [ $? -eq 0 ] && echo "OK" || echo "FAIL"
| ^-- SC2181: Check exit code directly with e.g. 'if mycmd;', not indirectly with $?.
|In package/unscd/S46unscd line 14:
| printf "Stopping ${NAME}: "
| ^------------------^ SC2059: Don't use variables in the printf format string. Use printf "..%s.." "$foo".
|In package/unscd/S46unscd line 16:
| [ $? -eq 0 ] && echo "OK" || echo "FAIL"
| ^-- SC2181: Check exit code directly with e.g. 'if mycmd;', not indirectly with $?.
|For more information:
| https://www.shellcheck.net/wiki/SC2059 -- Don't use variables in the printf...
| https://www.shellcheck.net/wiki/SC2181 -- Check exit code directly with e.g...
|25 lines processed
|1 warnings generated
In this first commit, add only the ability for check-package to call
external tools and not an example of such tool, as adding each tool to
call may need update to the docker image and can lead to it's own
discussion on how to implement.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add a small script to run commands in the same docker image used in the
GitLab CI.
For instance, one can run check-package unit tests without installing
pytest directly in the host:
$ ./utils/docker-run python3 -m pytest -v utils/checkpackagelib/
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
[Arnout: fix shellcheck errors; add exec]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
So anyone willing to contribute to check-package can run all tests in
less than 1 second by using:
$ python3 -m pytest -v utils/checkpackagelib/
Most test cases are in the form:
@pytest.mark.parametrize('testname,filename,string,expected', function)
- testname: a short description of the scenario tested, added in order
to improve readability of the log when some tests fail
- filename: the filename the check-package function being tested thinks
it is testing
- string: the content of the file being sent to the function under test
- expected: all expected warnings that a given function from
check-package should generate for a given file named filename and
with string as its content.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
size-stats-compare gives an overview of the size increase/decrease between
two cases, based on packages-file-list.txt. The 'detail' mode gives info per
file, otherwise per package.
But sometimes, you want the detailed per-file info, but only for a specific
package. Since the detailed output no longer lists the package name, you
cannot simply grep for it. A workaround was to filter the input
packages-file-list.txt's first, and then pass these filtered versions to
size-stats-compare.
Make this easier by adding the package name next to the filename in detailed
output. This allows grep'ing normally.
For example:
$ utils/size-stats-compare orig new -t 100 -d | grep ebtables
-67712 removed ebtables lib/ebtables/libebtc.so
-66764 removed ebtables lib/ebtables/libebt_nat.so
-66752 removed ebtables sbin/ebtables
-66704 removed ebtables lib/ebtables/libebt_arp.so
-66700 removed ebtables lib/ebtables/libebt_stp.so
-66700 removed ebtables lib/ebtables/libebt_among.so
-66684 removed ebtables lib/ebtables/libebt_ip.so
-66676 removed ebtables lib/ebtables/libebt_limit.so
-66656 removed ebtables lib/ebtables/libebt_log.so
-66648 removed ebtables lib/ebtables/libebt_mark.so
-66636 removed ebtables lib/ebtables/libebt_pkttype.so
-66604 removed ebtables lib/ebtables/libebt_vlan.so
-66588 removed ebtables lib/ebtables/libebt_ulog.so
-66588 removed ebtables lib/ebtables/libebt_nflog.so
-66584 removed ebtables lib/ebtables/libebt_arpreply.so
-66544 removed ebtables lib/ebtables/libebt_ip6.so
-66540 removed ebtables lib/ebtables/libebt_802_3.so
-66536 removed ebtables lib/ebtables/libebt_standard.so
-66524 removed ebtables lib/ebtables/libebt_mark_m.so
-66524 removed ebtables lib/ebtables/libebt_redirect.so
-66452 removed ebtables lib/ebtables/libebtable_filter.so
-66452 removed ebtables lib/ebtables/libebtable_broute.so
-66452 removed ebtables lib/ebtables/libebtable_nat.so
45 ebtables etc/ethertypes
66752 added ebtables usr/sbin/ebtablesd
66752 added ebtables usr/sbin/ebtables-legacy
66752 added ebtables usr/sbin/ebtablesu
200840 added ebtables usr/lib/libebtc.so.0.0.0
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
print_result is juggling with entry[x][y] which is not very readable.
While a better solution would be to use a class and reference named
attributes, that would require some bigger changes in the script.
Instead, make a minimal improvement by assigning the entry[x][y] values to
intermediate variables. Store them in a dict for easy usage from a format
string.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Commit 1ba85b7f87 (support/download: add explicit no-hash support)
introduced the 'none' hash type, in an attempt to make hash files
mandatory, but not failing on archives localy generated, like those
for git or svn repositories, especially for those packages where a
version choice was present, which would allow for either remote
archives for which we'd have a hash or VCS trees for which we could
not have a hash for the localy generated archive.
Indeed, back in the time, we did not have a mean to generate
reproducible archives, so having a hash file without a hash for
thosel ocally generated archives would trigger an error in the
hash-checking machinery.
But now, low-and-behold, we do know how to generate those archives,
and we have a mechanism to explicitly exclude some archives from being
hash-checked (e.g. when the version string itself can be user-provided).
As such, the 'none' hash type no longer has any raison d'être, we do not
use it in-tree, and its use in a br2-external tree is most probably
inexistent (as is the use of hash files alotgether most probably).
So we simply drop the support for that.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
[Thomas: drop support in checkpackagelib, as reported by Ricardo.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
JSON parser are usually rather strict when parsing their input. Both
jq and the python json module choke on non-conformant inputs.
Commit e4c284e6b9 (package/pkg-utils: escape \ in generated legal-info)
fixed the \-escaping case, but we want to ensure that we do not have
other data that would be improperly encoded.
To more easily catch issues, also run show-info and send its output
through jq, to try and validate the output.
Reported-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The seperation of the fields in the hash file should be 2 spaces for
consistency.
Since a large number of hash files still violate this rule, exclude it
from "make check-package" (and thus from CI).
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[Arnout:
- Move it to a separate class, so it can be excluded.
- Exclude it from "make check-package"
]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Python 2 is EOL sice 2020 [1], it's still available on distros, but may
not be installed by default (as being replaced by python3). A
compatibility symlink python -> python3 may not be installed either.
Convert the shebang line to the usual /usr/bin/env based line.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently, by following the instructions in the manual and querying for
developers for a patch that changes path
package/foobar
the script reports both developers that have these entries in the
DEVELOPERS file:
F: package/foo/
F: package/foobar/
Starting from commit "afc112b0e4 utils/getdeveloperlib.py: fix issue
with hasfile()" get-developers script uses os.path.abspath() and
os.path.relpath().
The catch is that those functions return the absolute path and the
relative path without the trailing slash.
When the paths associated to a developer are then compared to the paths
a patch touches, using the string.startswith(), any substring returns
True, leading to developers for package/foo/ being wrongly reported
for package/foobar/ .
Fix this by re-adding the trailing slash after using relpath().
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Heiko Thiery <heiko.thiery@gmail.com>
Cc: James Knight <james.d.knight@live.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Currently this .mk snippet results in unexpected behavior from
check-package:
|VAR_1 = VALUE1
|ifeq (condition)
|VAR_1 := $(VAR_1), VALUE2
|endif
Fix commit "163f160a8e utils/{check-package, checkpackagelib}:
consistently use raw strings for re.compile" that ended up doing this:
- CONCATENATING = re.compile("^([A-Z0-9_]+)\s*(\+|:|)=\s*\$\(\\1\)")
+ CONCATENATING = re.compile(r"^([A-Z0-9_]+)\s*(\+|:|)=\s*\$\(\\1\)")
But raw strings do not expect escaping when referencing \1 and the
pattern ends up searching for a raw '\\1' instead of an occurrence of
the first pattern inside parenthesis.
|$ python3
|Python 3.8.10 (default, Sep 28 2021, 16:10:42)
|[GCC 9.3.0] on linux
|Type "help", "copyright", "credits" or "license" for more information.
|>>> import re
|>>> p1 = re.compile('(foo)bar\\1')
|>>> p2 = re.compile(r'(foo)bar\\1')
|>>> p3 = re.compile(r'(foo)bar\1')
|>>> s1 = 'foobarfoo'
|>>> s2 = 'foobar\\1'
|>>> print(p1.search(s1))
|<re.Match object; span=(0, 9), match='foobarfoo'>
|>>> print(p2.search(s1))
|None
|>>> print(p3.search(s1))
|<re.Match object; span=(0, 9), match='foobarfoo'>
|>>> print(p1.search(s2))
|None
|>>> print(p2.search(s2))
|<re.Match object; span=(0, 8), match='foobar\\1'>
|>>> print(p3.search(s2))
|None
|>>>
So use '\1' instead of '\\1' in the raw string.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Titouan Christophe <titouan.christophe@railnova.eu>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Check that {FOO}_DEPENDENCIES are never overriden in a conditional
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Check typo in define to detect SMAKE_LINUX_CONFIG_FIXUPS in smack
(fixed by 41e2132fbe)
The new expression will catch "SMAKE_CONF_OPTS" as well as
"define SMAKE_LINUX_CONFIG_FIXUPS"
Two modifications were made:
- add (define\s+)? which will match "define " but also an empty value.
Thanks to this, the second group will always contain the variable
name.
- remove \s*(\+|)= which seems superfluous
Also, add GCC_TARGET in ALLOWED variable to avoid the following
warnings:
arch/arch.mk:12: possible typo: GCC_TARGET_ARCH -> *ARCH*
arch/arch.mk:13: possible typo: GCC_TARGET_ABI -> *ARCH*
arch/arch.mk:14: possible typo: GCC_TARGET_NAN -> *ARCH*
arch/arch.mk:15: possible typo: GCC_TARGET_FP32_MODE -> *ARCH*
arch/arch.mk:16: possible typo: GCC_TARGET_CPU -> *ARCH*
arch/arch.mk:17: possible typo: GCC_TARGET_FPU -> *ARCH*
arch/arch.mk:18: possible typo: GCC_TARGET_FLOAT_ABI -> *ARCH*
arch/arch.mk:19: possible typo: GCC_TARGET_MODE -> *ARCH*
Reviewed-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The message attribute does not exist in python3, see PEP-0352:
https://www.python.org/dev/peps/pep-0352/
Fixes:
Traceback (most recent call last):
File "utils/scanpypi", line 743, in <module>
main()
File "utils/scanpypi", line 693, in main
if 'buildutils' in err.message:
AttributeError: 'ImportError' object has no attribute 'message'
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
genrandconfig is used by the Buildroot autobuilders to generate
semi-random configurations that we build test. As part of this, we use
"make randpackageconfig" to randomize the selection of packages,
together with a KCONFIG_PROBABILITY value, which indicates the
probabibility for each option to be enabled. This probability is
itself randomized, between 1% and 30% for every build.
However, with our increasing number of packages (over 2900), when we
use a 30% probability for options to be enabled, it means a *lot* of
options are enabled, causing very large configurations to be
tested. These configurations are not very realistic, and they take
ages to build on our autobuilders: we have builds that take 4, 5 or
even 7 hours to build.
In order to test a larger number of configurations and therefore a
larger variety of configurations, this commit reduces the maximum
probability to 20%.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In commit
40bb37bd70 ("utils/getdeveloperlib.py:
use relative paths for files"), the Developer class was changed to use
relative paths, including for its .hasfile() method.
However the check_developers() function of getdeveloperlib.py was not
updated accordingly, and continued to pass absolute paths. This caused
"get-developers -c" to return the entire list of files in Buildroot as
being unmaintained, as none of them were matching the file listed in
the DEVELOPERS file.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In Python 3.x, check_output() returns a "bytes" array, and not a
string. Its result needs to be decoded to be turned into a
string. Without this fix, "get-developers -c" bails out with:
Traceback (most recent call last):
File "/home/thomas/projets/buildroot/./utils/get-developers", line 105, in <module>
__main__()
File "/home/thomas/projets/buildroot/./utils/get-developers", line 53, in __main__
files = getdeveloperlib.check_developers(devs)
File "/home/thomas/projets/buildroot/utils/getdeveloperlib.py", line 280, in check_developers
files = subprocess.check_output(cmd).strip().split("\n")
TypeError: a bytes-like object is required, not 'str'
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
ee8b680816 ("utils/scanpypi: use python3 explicitly") started to use python3,
thus compatibility can be removed:
from __future__ import print_function
from __future__ import absolute_import
Tested with python3 -m py_compile.
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Python 2 is EOL sice 2020 [1], it's still available on distros, but may not
be installed by default (as being replaced by python3).
Thus remove compatibility imports:
from __future__ import print_function
from __future__ import absolute_import
Tested with python3 -m py_compile.
[1] https://www.python.org/doc/sunset-python-2/
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Force relative file path resolution of DEVELOPERS file entries to use
forward-slash separators since pattern matching assumes forward slashes.
This is to help permit uses invoking `get-developers` on Platforms where
`os.sep` may not be a forward slash.
Signed-off-by: James Knight <james.d.knight@live.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Explicitly indicate the file encoding to UTF-8 for the DEVELOPERS
document. This prevents Unicode decoding errors when printing E-Mail
entries with Unicode characters on systems using an alternative default
encoding (e.g. 'CP1252').
This corrects the following observed error:
$ ./utils/get-developers outgoing/*
Traceback (most recent call last):
File "utils\get-developers", line 105, in <module>
__main__()
File "utils\get-developers", line 47, in __main__
devs = getdeveloperlib.parse_developers()
File "...\buildroot\utils\getdeveloperlib.py", line 239, in parse_developers
for line in f:
File "...\Python<ver>\lib\encodings\cp1252.py", line 23, in decode
return codecs.charmap_decode(input,self.errors,decoding_table)[0]
UnicodeDecodeError: 'charmap' codec can't decode byte 0x81 in position 6659: character maps to <undefined>
Signed-off-by: James Knight <james.d.knight@live.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently, running test-pkg is only done locally on the developers
machine.
In a follow up commit, we'll add the possibility to run test-pkg in a
gitlab-ci pipeline and, to speed things up, with one job per buildable
configuration.
As such, we will need to make sure that test-pkg only prepares the
configurations, and that it does not build them.
Add such a mode, with a new option, --prepare-only
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
When the config fragment provided by the user is not usable with a
specific toolchain configuration, the resulting .config file was kept
around.
In a follow up commit, we'll need to know, from outside test-pkg, if a
specific configuration was indeed usable or not.
So, unless if the user actually requested to keep the build directories,
remove the .config file when it contains a configration that would be
skipped.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Commit e43c050944 introduced two flake8
errors:
utils/scanpypi:300:26: E231 missing whitespace after ','
utils/scanpypi:302:9: F841 local variable 'setup' is assigned to but never used
The first one is easily fixed. The second one needs a little bit of
explanation. Before commit e43c0509, the return value of
imp.load_module() was used to be able to explicitly call the 'setup'
function in it in case the metadata was not populated. Since that
commit, calling that function is no longer needed, since setup.py is
executed in exactly the same way as when it's run from the command line,
so if that doesn't work, it's completely broken anyway. Therefore, we
can simply discard the return value of imp.load_module().
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
In case the setup.py file of a python package does not directly call the
'setup' method, utils/scanpypi was hoping there be a 'main' function which
would do the work, normally called via a construct like:
if __name__ == '__main__':
main()
However, this construct is nonstandard, and there are packages in PyPI which
call 'setup()' directly from the 'if' statement, without a main() method.
But scanpypi does not actually need to make such assumption: when loading
the module, it can decide the name to be '__main__', just as if setup.py
would be loaded interactively.
Additionally, remove some logic seemingly related to the previous trick of
calling 'main'. There should not be a problem in keeping already loaded
modules in sys.modules, as this is the purpose of sys.modules.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Even though the directory containing a package's setup.py was added to
sys.path, some setup.py implementations rely on the fact that it is placed
in sys.path[0].
An example package is 'cram' which failed to be added with scanpypi:
Traceback (most recent call last):
File "utils/scanpypi", line 756, in <module>
main()
File "utils/scanpypi", line 703, in main
package.load_setup()
File "utils/scanpypi", line 303, in load_setup
setup = imp.load_module('setup', s_file, s_path, s_desc)
File "/usr/lib/python3.8/imp.py", line 234, in load_module
return load_source(name, filename, file)
File "/usr/lib/python3.8/imp.py", line 171, in load_source
module = _load(spec)
File "<frozen importlib._bootstrap>", line 702, in _load
File "<frozen importlib._bootstrap>", line 671, in _load_unlocked
File "<frozen importlib._bootstrap_external>", line 783, in exec_module
File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
File "/tmp/scanpypi-2pzc5wb_/python-cram/cram-0.7/setup.py", line 44, in <module>
long_description=long_description(),
File "/tmp/scanpypi-2pzc5wb_/python-cram/cram-0.7/setup.py", line 20, in long_description
return open(os.path.join(sys.path[0], 'README.rst')).read()
FileNotFoundError: [Errno 2] No such file or directory: '.../buildroot/utils/README.rst'
The corresponding code from cram's setup.py is:
def long_description():
"""Get the long description from the README"""
return open(os.path.join(sys.path[0], 'README.rst')).read()
Indeed, the Python documentation says:
https://docs.python.org/3.8/library/sys.html#sys.path
"...
As initialized upon program startup, the first item of this list,
path[0], is the directory containing the script that was used to invoke
the Python interpreter.
..."
Fix this by inserting explicitly at index 0 instead of appending to
sys.path.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Some packages such as python-idna has a LICENSE.md file:
https://github.com/kjd/idna/blob/master/LICENSE.md
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
... similar to BR2_ENABLE_DEBUG.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since 810ba387be, some form of these options are enable
by default. Specifically:
- Kept FORTIFY level 2 option as the default is now level 1.
- Removed all SSP options as the default now uses the best
option based on toolchain support.
- Similar to SSP, for RELRO, the default now uses the best
option based on toolchain support.
- Completely drop PIC PIE as it defaults =y
Signed-off-by: Matthew Weber <matthew.weber@collins.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
scanpypi is python3 compatible. In addition, it executes the setup.py
of Python modules to extract the relevant information. Since these are
more and more commonly using python3 constructs, using "python" to run
scanpypi causes problems on systems that have python2 installed as
python, when trying to parse setup.py scripts with python3 constructs.
Fixes part of #13516.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
When a developer has package/pkg-<infra>.mk assigned to him/her in the
DEVELOPERS file, this has 3 implications:
(1) Patches adding new packages using this infrastructure are Cc'ed
to this developer. This is done by the analyze_patch() function,
which matches the regexp r"^\+\$\(eval
\$\((host-)?([^-]*)-package\)\)$" in the patch, i.e where an
added line contains a reference to the infra maintained by the
developer.
(2) Patches touching the package/pkg-<infra>.mk file itself are Cc'ed
to this developer.
(3) Any patch touching a package using this infra are also Cc'ed to
this developer.
Point (3) causes a significant amount of patches to be sent to
developers who have package/pkg-generic.mk and
package/pkg-autotools.mk assigned to them in the DEVELOPERS
file. Basically, all patches touching generic or autotools packages
get CC'ed to such developers, which causes a massive amount of patches
to be received.
So this patch adjusts the getdeveloperlib.py to drop point (3), but
preserves point (1) and (2). Indeed, it makes sense to be Cc'ed on new
package additions (to make a review that they use the package
infrastructure correctly), and it makes sense to be Cc'ed on patches
that touch the infrastructure code itself.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 40bb37bd70 refactored get-developers, and now the 'os' module is
no longer needed, but still imported:
utils/get-developers:6:1: F401 'os' imported but unused
1 F401 'os' imported but unused
Drop it now.
Reported-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Using absolute paths within getdeveloperlib isn't very sensible, it
makes a lot more sense to handle everything as relative paths from the
top-level Buildroot source directory.
parse_developers() is changed to no longer take the base path as
argument: it is automatically calculated based on the location of
utils/getdeveloperlib.py. Then, the rest of the logic is adjusted to
use relative paths, and prepend them with the base "brpath" when
needed.
This commit allows pkg-stats to report correct developers information
even when executed from an out of tree directory.
Before this patch:
$ ~/buildroot/support/scripts/pkg-stats -p ipmitool --json out.json
$ cat out.json | jq '.packages.ipmitool.developers'
[]
$ cat out.json | jq '.defconfigs.stm32f469_disco'
{
"name": "stm32f469_disco",
"path": "configs/stm32f469_disco_defconfig",
"developers": []
}
After this patch:
$ ~/buildroot/support/scripts/pkg-stats -p ipmitool --json out.json
$ cat out.json | jq '.packages.ipmitool.developers'
[
"Floris Bos <bos@je-eigen-domein.nl>",
"Heiko Thiery <heiko.thiery@gmail.com>"
]
$ cat out.json | jq '.defconfigs.stm32f469_disco'
{
"name": "stm32f469_disco",
"path": "configs/stm32f469_disco_defconfig",
"developers": [
"Christophe Priouzeau <christophe.priouzeau@st.com>"
]
}
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Instead of open-coding Developers.hasfile() in utils/get-developers,
use it directly.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
An 'else' or 'elif' clause inside a make conditional should not be indented
in the same way as the if/endif clause. check-package did not recognize the
else statement and expected an indentation.
For example:
ifdef FOOBAR
interesting
else
more interesting
endif
would, according to check-package, need to become:
ifdef FOOBAR
interesting
else
more interesting
endif
Treat 'else' and 'elif' the same as if-like keywords in the Indent test, but
take into account that 'else' is also valid shell, so we need to correctly
handle line continuation to prevent complaining about the 'else' in:
ifdef FOOBAR
if true; \
... \
else \
... \
fi
endif
We don't add the 'else' and 'elif' statements to start_conditional, because
it would cause incorrect nesting counting in class OverriddenVariable.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
pkg-stats is not able anymore to set the developers for defconfigs and
packages. This issue is introduced with
ae86067a15. The hasfile() method from
Developer object tries to check an absolute path against a relative path.
Convert the filepath to be checked also into an absolute path.
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Normally the kconfig stings would end up empty and cause a build
error. This patch provides test files to allow testing the creation
of uboot environment and script bin files from user provided txt files.
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Raw strings need to be used when calling re.compile() otherwise Python
3.x flake8 complains with:
W605 invalid escape sequence '\s'
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Titouan Christophe <titouan.christophe@railnova.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 9ea528f84b (package/python-nfc: bump to version 0.13.5) changed the
python-nfc package to download from github, so the package no longer needs
bzr on the host.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
With classpath removed, no packages select these symbols any more - So drop
them and their corresponding logic in dependencies.sh / genrandconfig.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The new .hash convention is to use 2 spaces between fields.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The aclocal program is provided by the automake package, so it makes
sense to define aclocal-related variables in automake.mk.
Add an exception to check-package to ignore that variable.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
we don't want create new BR package with perl core module,
because core modules are already included in perl distribution,
and built with the BR package perl.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Now that the support for per-package directories has been merged, it
is time to get some exposure for it in the autobuilders, so let's
build 1 out of 15 builds with this feature enabled, at least as an
initial step.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
With Python 3.7, genrandconfig fails with:
'str' object has no attribute 'decode'
We are already working on str objects, and there is no need to decode
them, so we drop the call to decode_byte_list() and its definition as
it was only used there.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
That change will alphabetically set list order
of required packages in Config.in file automatically.
Example below:
before: ['python-pyserial', 'python-pyaes', 'python-ecdsa']
after: ['python-ecdsa', 'python-pyaes', 'python-pyserial']
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
License files are sometimes called LICENCE, so support that as well.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This patch adds the remaining ssp and relro cases plus both of the
fortify options. The randomization was left consistant between the
options but the order of the conditions placed the most restrictive
hardening options with more priority.
Cc: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
On some cases, when the package contains multiple license files
and some of them from the same type, the scanpypi script will write
the same license type more than once under _LICENSE.
Hence, before creating the _LICENSE variable, we'll remove every
possible duplication.
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This commit modifies the main() function so that it returns the sum of
build and legal errors, making sure the overall test-pkg script exists
with a non-zero error code upon failure.
Signed-off-by: Heiko Thiery <heiko.thiery@kontron.com>
[Thomas: improved commit log]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
'source' without a previous 'menu' is common in package/Config.in in
br2-externals.
Signed-off-by: Jerzy Grzegorek <jerzy.m.grzegorek@gmail.com>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Reviewed-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This makes sure the state from a previous run (previous file) can never
leak over into the next file.
Also order the initializations alphabetically.
Signed-off-by: Jerzy Grzegorek <jerzy.m.grzegorek@gmail.com>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Acked-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The handling of 'comment...', 'if ...' and 'menu ...' lines have almost
nothing in common, and subsequent patches will give them even less in
common. Therefore, completely separate their handling in top-level
conditions. The only code that gets duplicated in the different branches
is the 'self.initialize_level_elements(text)' call.
Signed-off-by: Jerzy Grzegorek <jerzy.m.grzegorek@gmail.com>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Reviewed-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
A comment is considered an alternative delimiter like a menu. I.e.,
a menu that comes after a comment should not be considered a submenu of
that comment. Therefore, remove the '-comment' state before adding the
'-menu' one.
Signed-off-by: Jerzy Grzegorek <jerzy.m.grzegorek@gmail.com>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Reviewed-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Change the type of variable 'new_package' to make it a class member.
It will be used not only locally. Also initialize it.
Signed-off-by: Jerzy Grzegorek <jerzy.m.grzegorek@gmail.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Factor out two functions to initialize arrays elements. They will be
reused by followup patches.
Signed-off-by: Jerzy Grzegorek <jerzy.m.grzegorek@gmail.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Get value of variable 'level' only just after the state change.
Signed-off-by: Jerzy Grzegorek <jerzy.m.grzegorek@gmail.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Change the type of variable "level" to make it a class member.
It will be used not only locally.
Signed-off-by: Jerzy Grzegorek <jerzy.m.grzegorek@gmail.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
[Thomas: initialize self.level in the before() method, as suggested by
Ricardo]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
MANIFEST may contains line like this:
"LICENSE LICENSE file (added by Distar)"
so, retains only the first word.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
After a few weeks of running reproducible builds in the autobuilders,
we found out that such builds without a diffoscope analysis are pretty
useless: the cmp on the tarballs doesn't help us fix the
reproducibility issue.
So, let's only do reproducible builds when diffoscope is available.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-by: Atharva Lele <itsatharva@gmail.com>
Acked-by: Atharva Lele <itsatharva@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In a future patch, we are going to need a SystemInfo() instance in
gen_config(), so create the SystemInfo() instance there, and pass it
to fixup_config(), where we currently use it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-by: Atharva Lele <itsatharva@gmail.com>
Acked-by: Atharva Lele <itsatharva@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix a weird blank-line missing and 2 trailing blank-space.
Signed-off-by: Victor Huesca <victor.huesca@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch extends the Developer class so that it associates each
developer with the defconfigs (in configs/) is in responsible for,
according to the DEVELOPERS file.
It will allow using the getdeveloperlib module to find which developer
is responsible for which defconfig, and send e-mail notifications of
defconfig build failures.
Signed-off-by: Victor Huesca <victor.huesca@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch extends the Developer class so that it associates each
developer with the runtime tests (in support/testing) is in
responsible for, according to the DEVELOPERS file.
The implementation relies on the unittest module to list all test
cases and does some manual parsing of these test-case objects to get
the actual list of test-cases per test-suite.
A global variable is used to compute the list of unittest only once.
This feature will allow to use the getdeveloperlib module to find
which developer is responsible for which runtime test, and send e-mail
notifications of runtime tests failures.
Signed-off-by: Victor Huesca <victor.huesca@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
