Libsepol uses cdefs.h which is a internal glibc header.
This header is not intended to be used by any program and will cause
compiling against musl (and possibly other c libraries) to fail.
This patch fixed this issue and replaces all references of
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since efl update to 1.15 version, the efl package is a "real"
Buildroot package. It doesn't contain any subdirectories anymore.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With this config you can bootup a Linux kernel
in GDB simulator and test Blackfin kernel and
userland.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As reported in bug #9091, the U-Boot environment we provide for the
Microzed and Zedboard platforms loads the ramdisk at 0x2000000 and the
DT at 0x3000000. This means that a large enough ramdisk overwrites the
DT. It makes more sense to load the DT at 0x2000000 and the ramdisk at
0x3000000.
Reported-by: Michael Monaghan <michaellmonaghan@gmail.com>
Tested-by: Michael Monaghan <michaellmonaghan@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Dagg Stompler <daggs@gmx.com>
[Thomas:
- restrict to EABIhf for ARM, since the libraries are pre-built for
this ABI
- add comment about the glibc dependency
- indicate odroid-scripts is a runtime dependency
- remove fbset dependency]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
There is no reason to link Go binaries statically, unless when
BR2_STATIC_LIBS=y.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
There is no reason to link Go binaries statically, unless when
BR2_STATIC_LIBS=y.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
There is no reason to link Go binaries statically, unless when
BR2_STATIC_LIBS=y.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Starting with gdb 7.11, the bundled gnulib want to use rpl_gettimeofday
(gettimeofday replacement) due bad guessing when cross-compiling with musl
and uClibc toolchains. Instead of patching gnulib configure script to fix
the test, use gl_cv_func_gettimeofday_clobber=no to not use rpl_gettimeofday.
Thanks to Thomas Petazzoni to suggest this patch.
Reported upstream:
https://sourceware.org/bugzilla/show_bug.cgi?id=19798
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When built statically, runc try to link against Scrt1.o which is not
provided by uClibc ARM toolchain for static build only.
[...]arm-buildroot-linux-uclibcgnueabi/bin/ld: cannot find Scrt1.o: No such file or directory
collect2: error: ld returned 1 exit status
On ARM, Go forces the use of -pie, for some reason:
pie := (goarch == "arm" && goos == "linux") || goos == "android"
if pie { // we need to use -pie for Linux/ARM to get accurate imported sym
cgoLDFLAGS = append(cgoLDFLAGS, "-pie")
}
For this reason, add a dependency on BR2_TOOLCHAIN_SUPPORTS_PIE for ARM
CPUs to disable Go for such toolchains.
While at it, rewrap Go dependencies.
[1] http://lists.busybox.net/pipermail/buildroot/2016-July/167206.html
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Christian Stewart <christian@paral.in>
Tested-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
uClibc-ng does not support PIE for some architectures as
arc and m68k. It isn't implemented in the static linking case, too.
With musl toolchains you might have static PIE support with little
patching of gcc. Static linking for GNU libc isn't enabled in
buildroot. Fixup any package using special treatment of PIE.
(grep -ir pie package/*/*.mk)
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
[Thomas: use positive logic.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This package adds the SGX demos from Imagination Technologies, they are
available as binaries only.
This package contains binaries compiled for the SGX graphics accelerator used
in the following Texas Instruments SoCs: AM335x, AM437x, AM4430, AM5430.
Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The uCP1020 product family (ucp1020) is an Arcturus Networks Inc.
System on Modules product featuring a Freescale P1020 CPU,
optionally populated with 1 or 2 Gig-Ethernet PHYs,
DDR3, NOR Flash, eMMC NAND Flash and/or SPI Flash.
Signed-off-by: Oleksandr G Zhadan <oleks@arcturusnetworks.com>
Signed-off-by: Michael Durrant <mdurrant@arcturusnetworks.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- fix disablehpd bug (thanks to Thomas for spotting it.)
- change default HDMI mode to 1080p60hz.
- add support for HDMI HotPlug Detection control.
- add support for mason timer.
- add support for headless boot
Signed-off-by: Dagg Stompler <daggs@gmx.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump the pinned docker-containerd version to the latest in advance
of the introduction of docker-engine v1.12.0-rc4.
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is The Linux UPnP Internet Gateway Device 2. It is
modified from the original Linux UPnP Internet Gateway Device
[http://linux-igd.sourceforge.net/] according to UPnP
InternetGatewayDevice:2 specifications.
It implements the UPnP Internet Gateway Device version 2
specification (IGDv2) and allows UPnP aware clients, such as
MSN Messenger, Azureus or Miranda to work properly from behind
a NAT firewall.
Please edit /etc/upnpd.conf before using upnpd!
https://github.com/ffontaine/igd2-for-linux
Signed-off-by: Fabrice Fontaine <fabrice.fontaine@orange.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Romain Naour <romain.naour@gmail.com>
[Thomas:
- rewrap Config.in help text
- fix license, it's BSD-2c, not just "BSD"
- add dependency on host-pkgconf]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
If those flags are not explicitly passed, the sdl2_ttf configure script
will include -I/usr/include and -L/usr/lib in the compile flags, which
are obviously unsafe for cross-compilation.
"checking for X... libraries /usr/lib, headers /usr/include"
Fixes:
http://autobuild.buildroot.net/results/f968fb31e9882cc856296a7c729d93e345e9e861
Signed-off-by: Romain Naour <romain.naour@gmail.com>
[Thomas:
- don't pass an argument to --with-x
- use --without-x instead of --with-x=no]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Switching to the rtl8821au fork at github.com/abperiasamy/rtl8812AU_8821AU_linux.
- The current fork we are using is maintained by 1 person.
- The current fork does not work, and there are no plans to fix this:
- https://github.com/ulli-kroll/rtl8821au/issues/5
- https://github.com/ulli-kroll/rtl8821au/issues/6
- In practice, the current fork has numerous instability issues.
- Our lab switched to the abperiasamy fork a couple months ago and have been very happy with it.
- The contributor list for the abperiasamy fork contains 21 well-known individuals in the community.
- The raspberry pi community recommends the abperiasamy fork and uses it extensively.
- Firmware blobs are not necessary with the new fork.
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
And drop upstream patch.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
If asciidoc and xmlto are around it will automatically enable the
documentation build which is pointless.
Build time on i5-3330 with docs = 37s, without docs 25s.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tunctl is a tool for controlling the TUN/TAP driver in Linux.
Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com>
[Thomas: use $(TARGET_CONFIGURE_OPTS).]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
pcmanfm can now use gtk3+ so use that over gtk2+ if it's available.
Since it's only x11-safe for the moment the comment and deps other than
gtk stay the same.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
pcmanfm can now use gtk3+ so use that over gtk2+ if it's available.
Since it's only x11-safe for the moment the comment and deps other than
gtk stay the same.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
[Thomas:
- remove check for the ser2net binary
- add check for the configuration file
- use 'printf' instead of 'echo -n'
- fix indentation where needed]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
systemd it one of the "highly recommended" dependecies according to the
README [1] but disabling it doesn't need the
--enable-i-really-know-what-i-am-doing... option.
That's why BR2_PACKAGE_EFL_HAS_RECOMMENDED_CONFIG is not disabled when
systemd is not selected.
[1] https://git.enlightenment.org/core/efl.git/tree/README?h=efl-1.17#n489
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
