In most embedded systems, there is not much point in installing bash
completion files, especially since bash may not necessarily be present
on the target.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
mkostemp() is missing with older version of uClibc (uClibc <= 0.9.33).
So, we need to check if mkostemp() is available.
If not, we use a wrapper function based on mkstemp() to implement it.
Since util-linux v2.23, mkostemp() is called with O_CLOEXEC flag.
If we use a define to mkstemp() to implement mkostemp(), flags will be
discared.
mkstemp() will pass O_RDWR|O_CREAT|O_EXCL, but not O_CLOEXEC, which
means that the file descriptor will no longer be closed automatically
upon exec().
To avoid to discard the flags, we add a call to fcntl() to set O_CLOEXEC
flag just after mkstemp().
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Removed "support older machines" patch as it has been fixed upstream,
fixed up other patches.
This removes some arch-dependencies in fdiskbsdlabel.h, fixing the
build for the ARC-architecture.
This fixes:
http://autobuild.buildroot.net/results/8863799d856ccab51ee8ffd499378574ef166aee/
Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Signed-off-by: Anton Kolesov <Anton.Kolesov@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The libblkid library in util-linux uses fork. While it seems
potentially possible to disable the parts of the library that use fork
(the only parts using fork are parts related to LVM and Device Mapper,
which are said to be legacy as they are replaced by sysfs based
scanning, instead of having to fork to run a separate process).
However, since libblkid is used by:
- e2fsprogs, which uses lots of fork all over the place
- udev, which most likely will also need fork
There is not much point in making libblkid fork-less. As a
consequence, this commit makes util-linux/libblkid unavailable on
non-MMU architectures, and propagates the relevant dependency to the
reverse dependencies of libblkid.
This fixes the e2fsprogs build failure seen on Blackfin. The failure
was due to a configure test of e2fsprogs which was trying to link a
small test program against libblkid, which failed because there was an
undefined reference to fork() in the libblkid code.
Fixes:
http://autobuild.buildroot.net/results/ee2c1568d16ac040011dd4d6d8b543ff9e9e2622/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts commit 2746158497. This
commit is causing build issues when chfn/chsh are selected, due to bad
interactions with PAM. The initial submitter of the patch has agreed
to work on an improved version that fixes those problems, but in the
mean time, we revert this commit to prevent the problem from occuring
in the autobuilders.
Fixes:
http://autobuild.buildroot.org/results/820/8204008da6944923034fa17ecbcfefcf15373ee5/build-end.log
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Peter: adjust white space and commit message]
Signed-off-by: Shawn Landden <shawn@churchofgit.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When busybox isn't installed symlink agetty->getty to make the default
inittab work.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Install PAM configuration files for su (with "su -" variant) and login
when the tools are enabled.
This finally fixes bug #5366 and now we can login with an util-linux
/bin/login.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The patch has a minor mistake so fix it.
Credit go to Daniel Mentz <daniel@exxm.de> for the detailed bug report.
Closes bug #6428
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch fixes the following whitespace problems in Config.in files:
- trailing whitespace
- spaces instead of tabs for indentation
- help text not indented with tab + 2 spaces
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Ncurses not necessary when building host-util-linux, so passing
--without-ncurses avoids from misdetecting an installed host ncurses
on the build machine.
[Thomas: improve commit message]
Signed-off-by: Olivier Schonken <olivier.schonken@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch lines up the comments in Config.in files that clarify which
toolchain options the package depends on.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Peter: leave change xz tarball format to not end up with circular deps]
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Removed patches that were are now in version 2.23 of util-linux along with
fixed up other patches so they apply cleanly.
Signed-off-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Also add missing select in Config.in.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This fixes the following errors when building util-linux v2.22.2 for
the host in case the PAM headers are missing:
configure: error: login selected, but required PAM header file not available
configure: error: su selected, but required PAM header file not available
Signed-off-by: Christophe Vu-Brugier <cvubrugier@lacie.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump to latest 2.22.2 version and revamp available options.
* Remove the assumed enable/disable defaults since these seem to change
quite often, so do what's wise and always enable/disable things.
* Switch from build "X" menu options to just X, add some help and sort.
* Introduce new option to install binaries (or not) to reduce bloat for
packages that just need libblkid and/or libuuid.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Thomas Petazzoni: rename patch to not have the package version in the
patch file name, adjust the commit title.]
Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As we are going to add an Xtensa related patch that needs to be
applied *after* the AArch64 patch, let's first add a number to each
util-linux patch file name, so that we know they will be applied in
the right order.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
util-linux-2.20.1-sscanf-no-ms-as.patch has a version in its name, and
therefore the other patch, unversioned,
util-linux-uclibc-build-fix.patch, never gets applied.
Fix this by renaming util-linux-2.20.1-sscanf-no-ms-as.patch to
util-linux-sscanf-no-ms-as.patch.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
From now on, packages only need to select the BR2_PACKAGE_GETTEXT
option and depend on the 'gettext' package to get the necessary i18n
libraries installed on the target.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[yann.morin.1998@free.fr: remove BR2_PACKAGE_LIBINTL]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
CC: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
lttng-babeltrace needs libuuid, which is provided by util-linux, and
since we want to build lttng-babeltrace for the host, we need to build
libuuid for the host. It's a shame that libuuid is part of such a big
package as util-linux.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
addpart, delpart and partx are enabled by default so --disable now to
avoid build breaking when we lack libblkid.
Also select libblkid when it's enabled now.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Thanks to the pkgparentdir and pkgname functions, we can rewrite the
AUTOTARGETS macro in a way that avoids the need for each package to
repeat its name and the directory in which it is present.
[Peter: pkgdir->pkgparentdir]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
util-linux uses mkinstalldirs to install .po files when locales are
enabled, but the definition of MKINSTALLDIRS comes from a tweaked
nls.m4 (based on the one from gettext).
When we autoreconf the package, we end up using the system (staging)
version of nls.m4, so MKINSTALLDIRS doesn't get defined.
Fix it by passing a definition of MKINSTALLDIRS to make during the
install steps.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The configure script correctly detects presence of libintl, but it forgets
to link against it, breaking the build.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
