Add myself to help maintaining package/libkcapi.
Signed-off-by: Tan En De <ende.tan@starfivetech.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This is a new pep517 based build backend.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
tinycompress is a library for compress audio offload in alsa.
It also contains the "cplay" and "crecord" programs.
tinycompress is part of the ALSA project.
https://www.alsa-project.org/
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
mdio-tools are kernel module and accompanying tools for low-level
debugging of devices attached on MDIO bus like PHY-s, switches etc.
Userspace tools provide C22 or C45 reads and writes, benchmarking
and even dedicated Marvell Link Street tools via the included
kernel module.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
kmemd let's you inspect a live Linux kernel's memory using GDB.
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds Xilinx bootgen as a host package to buildroot.
bootgen is a required utility for generating a boot.bin for
Xilinx versal products.
In addition, for developers who wish to use secure boot with
Xilinx SoC products such as zynq and zynqmp, bootgen has a
more complete offering in secure boot features than the u-boot
mkimage utility.
https://github.com/Xilinx/bootgen
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add a defconfig for the Starfive VisionFive board, a board built around the
Starfive JH7100 RISC-V 64bit SoC (same as Beaglev).
This board comes with functional lowlevel and U-Boot bootloaders in SPI
flash. The defconfig reuses these and only builds a (6.0 based) kernel and
rootfs.
The factory shipped U-Boot is hard coded to look at MMC partition 3 and
misses some variables, so we provide a uEnv.txt to fix that up, based on
what is done in provided Fedora image.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Nicolas Tran is apparently no longer at Smile:
The response from the remote server was:
450 4.1.1 <nicolas.tran@smile.fr>: Recipient address rejected: User unknown in virtual mailbox table
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
His e-mail server is no longer responsive. Every single day, we get:
<joerg.krause@embedded.rocks>: connect to embedded.rocks[99.83.154.118]:25:
Connection timed out
when sending the daily autobuilder report.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
A native implementation of TLS (and various other cryptographic tools)
in JavaScript.
Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
[Thomas: switch to pre-compiled JS files instead of depending on
host-nodejs]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
crun is a fast and low-memory OCI Container Runtime in C.
https://github.com/containers/crun
Signed-off-by: Christian Stewart <christian@paral.in>
Tested-by: TIAN Yuanhao <tianyuanhao3@163.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
No review/patches from my side the last few months, so drop my
DEVELOPERS entry.
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Docker Compose v2 is no longer a standalone component, but is now a
plugin loaded by docker-cli.
As such, it should not be installed in /usr/bin, but in the directory
where docker-cli loads its plugins from.
Additionally, we consequently make docker-compose depend on docker-cli;
indeed, it does not really make sense to present a plugin unless the
component it attaches to is already enabled [0].
License hash changed due to strictly copying the license text template,
without customisation to the year and copyright owner.
[0] the original submission by Christian would use a select, to keep
existing config, but that's not sensible, as we already have some
packages that are plugins and that use depends-on, like nginx plugins.
For consistency and as it semantically makes sense, we use a depends-on
here too.
Signed-off-by: Christian Stewart <christian@paral.in>
[yann.morin.1998@free.fr:
- don't select docker-cli, but depends-on it; explain it in commit log
- explain why we override the install commands
- explain change in license file hash
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
python-libevdev is needed for libinput replay command:
$ libinput replay recording.yml
Error: No module named 'libevdev'
One or more python modules are missing. Please install those modules and re-run this tool.
Indeed only libinput-replay tool is a python script
(like libinput-analyze-recording, libinput-measure-fuzz...)
python-libevdev itself requires a kernel built with
CONFIG_INPUT_UINPUT option enabled, enable this option if a kernel is
built by Buildroot.
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
libmanette is a library which provides a higher level interface to
enumerate and make use of game controllers (gamepads, joysticks).
WebKitGTK can use libmanette to expose controllers to web content,
which will be enabled on a follow-up patch.
Minimal kernel headers 4.16 for input_event_sec and input_event_usec
in struct input_event.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
[Arnout: add kernel headers dependency suggested by Romain]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Dracut is the tool used by desktop distributions to build initrds.
In the embedded world, it can be very useful, too, for instance when
wanting to create an initramfs for a system recovery mode.
Whereas it is definitively possible to achieve this with buildroot, the
process is to have a dedicated buildroot configuration for that, and
perform a full build. Instead of doing that, dracut can pick the needed
binaries/shared libraries, configuration files, or kernel modules from
the 'target' directory.
The advantage is to save build time, and also to have a consistency
between the packages versions taken for the recovery and the production
filesystem.
The principle of dracut is based on the so-called 'dracut modules'. The
modules determine what will be included in the initramfs. For example,
one of dracut's modules checks the kernel modules that are included and
also includes the corresponding firmware blobs.
On the host, they are on host/lib/dracut/modules.d
Each directory as a prefix number for the order of execution, and
at least a "module-setup.sh" script.
Dracut sources all of them, and typically calls the "check()" function,
which is the placeholder for required binaries (that are aimed to be
polulated in the initrd), then the "depends()" function, that lists
other modules to depend on, and the "install()" function, that makes
the actual work.
Dracut was initially thought to work with systems using systemd,
but it can also work without it. Do to so, every "systemd-xxx"
module must be disabled in the dracut configuration file. For
convenience, the 05busybox-init module is provided, to support
busybox init system. Note that this module should *not* be enabled when
using systemd init. It is therefore only installed if busybox init is
selected.
Musl and uClibc make assumptions about the existence of some symlinks
that are not discoverable with readelf. Therefore, another module
05libc-links is provided that creates those links. The module is
installed regardless of which libc is used - the script itself discovers
if the links need to be installed based on which libc is found.
Signed-off-by: Thierry Bultel <thierry.bultel@linatsea.fr>
[arnout@mind.be: many changes]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Adam Duskett <aduskett@gmail.com>
[yann.morin.1998@free.fr: some additional fixups]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Required by python-twisted[conch], which is required by
python-crossbar.
Signed-off-by: Emile Cormier <emile.cormier.jr@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
nanopi-neo no longer builds, as uboot needs python2 on the host:
https://gitlab.com/buildroot.org/buildroot/-/jobs/2812053540
I no longer have access to that board, so I can't test an update to
either uboot or the kernel anymore.
Drop the board.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Broadcom Northstar family of SoCs is most commonly used for home
routers. It's an ARM platform with Cortex-A9 CPU(s).
All known Northstar devices come with CFE bootloader which almost
always expects a TRX firmware format (with exception for D-Link). Some
vendors (like Luxul and Netgear) wrap TRX in their own containers.
This board code provides:
1. Minimal kernel with support for on-SoC blocks. It enables Linux
drivers for SoC, watchdog, Ethernet, switch, USB, PCIe, LEDs).
2. Post image script building firmware images. In uses Buildroot
packages tools (lzma_alone, otrx, lxlfw) to build
bootloader-compatible images that can be flashed.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
construct is a Python library for declarative serialization/
deserialization of structured binary data.
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Needed for upcoming version bump of transmission.
Build test using this defconfig
BR2_PACKAGE_DHT=y
was successful:
andes-nds32 [ 1/45]: OK
arm-aarch64 [ 2/45]: OK
bootlin-aarch64-glibc [ 3/45]: OK
bootlin-arcle-hs38-uclibc [ 4/45]: OK
bootlin-armv5-uclibc [ 5/45]: OK
bootlin-armv7-glibc [ 6/45]: OK
bootlin-armv7m-uclibc [ 7/45]: OK
bootlin-armv7-musl [ 8/45]: OK
bootlin-m68k-5208-uclibc [ 9/45]: OK
bootlin-m68k-68040-uclibc [10/45]: OK
bootlin-microblazeel-uclibc [11/45]: OK
bootlin-mipsel32r6-glibc [12/45]: OK
bootlin-mipsel-uclibc [13/45]: OK
bootlin-nios2-glibc [14/45]: OK
bootlin-openrisc-uclibc [15/45]: OK
bootlin-powerpc64le-power8-glibc [16/45]: OK
bootlin-powerpc-e500mc-uclibc [17/45]: OK
bootlin-riscv32-glibc [18/45]: OK
bootlin-riscv64-glibc [19/45]: OK
bootlin-riscv64-musl [20/45]: OK
bootlin-sh4-uclibc [21/45]: OK
bootlin-sparc64-glibc [22/45]: OK
bootlin-sparc-uclibc [23/45]: OK
bootlin-x86-64-glibc [24/45]: OK
bootlin-x86-64-musl [25/45]: OK
bootlin-x86-64-uclibc [26/45]: OK
bootlin-xtensa-uclibc [27/45]: OK
br-arm-basic [28/45]: OK
br-arm-full-nothread [29/45]: OK
br-arm-full-static [30/45]: OK
br-i386-pentium4-full [31/45]: OK
br-i386-pentium-mmx-musl [32/45]: OK
br-mips64-n64-full [33/45]: OK
br-mips64r6-el-hf-glibc [34/45]: OK
br-powerpc-603e-basic-cpp [35/45]: OK
br-powerpc64-power7-glibc [36/45]: OK
linaro-aarch64-be [37/45]: OK
linaro-aarch64 [38/45]: OK
linaro-arm [39/45]: OK
sourcery-arm-armv4t [40/45]: OK
sourcery-arm [41/45]: OK
sourcery-arm-thumb2 [42/45]: OK
sourcery-mips64 [43/45]: OK
sourcery-mips [44/45]: OK
sourcery-nios2 [45/45]: OK
45 builds, 0 skipped, 0 build failed, 0 legal-info failed, 0 show-info failed
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Needed for upcoming version bump of transmission:
d8d765c595
Build test using this defconfig
BR2_PACKAGE_LIBDEFLATE=y
was successful:
andes-nds32 [ 1/45]: OK
arm-aarch64 [ 2/45]: OK
bootlin-aarch64-glibc [ 3/45]: OK
bootlin-arcle-hs38-uclibc [ 4/45]: OK
bootlin-armv5-uclibc [ 5/45]: OK
bootlin-armv7-glibc [ 6/45]: OK
bootlin-armv7m-uclibc [ 7/45]: OK
bootlin-armv7-musl [ 8/45]: OK
bootlin-m68k-5208-uclibc [ 9/45]: OK
bootlin-m68k-68040-uclibc [10/45]: OK
bootlin-microblazeel-uclibc [11/45]: OK
bootlin-mipsel32r6-glibc [12/45]: OK
bootlin-mipsel-uclibc [13/45]: OK
bootlin-nios2-glibc [14/45]: OK
bootlin-openrisc-uclibc [15/45]: OK
bootlin-powerpc64le-power8-glibc [16/45]: OK
bootlin-powerpc-e500mc-uclibc [17/45]: OK
bootlin-riscv32-glibc [18/45]: OK
bootlin-riscv64-glibc [19/45]: OK
bootlin-riscv64-musl [20/45]: OK
bootlin-sh4-uclibc [21/45]: OK
bootlin-sparc64-glibc [22/45]: OK
bootlin-sparc-uclibc [23/45]: OK
bootlin-x86-64-glibc [24/45]: OK
bootlin-x86-64-musl [25/45]: OK
bootlin-x86-64-uclibc [26/45]: OK
bootlin-xtensa-uclibc [27/45]: OK
br-arm-basic [28/45]: OK
br-arm-full-nothread [29/45]: OK
br-arm-full-static [30/45]: OK
br-i386-pentium4-full [31/45]: OK
br-i386-pentium-mmx-musl [32/45]: OK
br-mips64-n64-full [33/45]: OK
br-mips64r6-el-hf-glibc [34/45]: OK
br-powerpc-603e-basic-cpp [35/45]: OK
br-powerpc64-power7-glibc [36/45]: OK
linaro-aarch64-be [37/45]: OK
linaro-aarch64 [38/45]: OK
linaro-arm [39/45]: OK
sourcery-arm-armv4t [40/45]: OK
sourcery-arm [41/45]: OK
sourcery-arm-thumb2 [42/45]: OK
sourcery-mips64 [43/45]: OK
sourcery-mips [44/45]: OK
sourcery-nios2 [45/45]: OK
45 builds, 0 skipped, 0 build failed, 0 legal-info failed, 0 show-info failed
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This test relies on the OLA Dummy plugin presenting a test device
and port. It starts the daemon, performs few configuration commands,
covers the Python bindings and also test the OLA web interface.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
[Arnout:
- Indent hash file with two spaces.
- Bump to 1.7.3 to fix build failure with recent GCC.
- Get from github instead of PyPI.
- Add host-meson and host-python-pythran dependencies.
- Properly propagate Config.in dependencies.
- Correct usage of BR2_INSTALL_LIBSTDCPP symbol.
- Remove F77, no longer used.
]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Guillaume:
- -lnpymath: npymath.ini localization problem
- -lnpyrandom resolution problem
- fix legal-info for latest version LICENSE.txt
- zlib is a scipy::io module runtime requirement
- update serie for scipy 1.8.1 (latest)
]
Signed-off-by: Guillaume W. Bres <guillaume.bressaix@gmail.com>
[Thomas:
- add runtime test
- drop dependency on OpenBLAS, which is not needed in a minimal
configuration
- remove PYTHON_SCIPY_NPY_PKG_CONFIG_PATH logic as it is no longer
needed
]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
