It's time to finally switch over globally to the new spacing format
that we have agreed on for the hash file, with 2 spaces as a separator
between fields.
This commit was mechanically generated using:
find . -type f -name '*.hash' | xargs sed -i 's%^md5[ \t]*\([^ \t]*\)[ \t]*\(.*\)$%md5 \1 \2%'
find . -type f -name '*.hash' | xargs sed -i 's%^sha1[ \t]*\([^ \t]*\)[ \t]*\(.*\)$%sha1 \1 \2%'
find . -type f -name '*.hash' | xargs sed -i 's%^sha256[ \t]*\([^ \t]*\)[ \t]*\(.*\)$%sha256 \1 \2%'
find . -type f -name '*.hash' | xargs sed -i 's%^sha512[ \t]*\([^ \t]*\)[ \t]*\(.*\)$%sha512 \1 \2%'
This commit can easily be backported on the LTS branch by re-running
the same commands, if needed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently, glibc depends on !BR2_STATIC_LIBS in all the toolchain
variants.
However, for some architectures, glibc is the only supported libc. In
commit 3b3105328e ("Config.in: only
allow BR2_STATIC_LIBS on supported libc/arch"), we implemented a fix
to avoid configurations were BR2_STATIC_LIBS=y with an architecture
already supported by glibc, because these configurations are
impossible. This commit 3b3105328e
prevents from selecting BR2_STATIC_LIBS=y when the C library used for
the internal toolchain backend is glibc.
However, it introduces a discrepency between how this topic is handled
for internal and external toolchains:
- For internal toolchains, we prevent BR2_STATIC_LIBS=y if glibc is
chosen.
- For external toolchains, we allow BR2_STATIC_LIBS=y in all cases,
and it's each glibc toolchain that has !BR2_STATIC_LIBS
This commit addresses this discrepency by preventing BR2_STATIC_LIBS=y
if glibc is chosen in all cases.
Thanks to this, we can remove the !BR2_STATIC_LIBS dependency on both
the glibc package, and all glibc external toolchains.
Fixes: https://bugs.busybox.net/show_bug.cgi?id=14256
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas: update to master, fix the gen-bootlin-toolchains script, add
a comment in the static/shared choice to indicate that static is
supported only with uclibc or musl]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
As we're about to remove the nds32 architecture support from
Buildroot, drop the toolchain-external-andes-nds32 external toolchain
package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Yu Chien Peter Lin <peterlin@andestech.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Some external toolchains do not have gdbserver available, but the
option BR2_TOOLCHAIN_EXTERNAL_GDB_SERVER_COPY is always visible. And
when enabled, this option aborts with an error when gdbserver cannot
be found:
Could not find gdbserver in external toolchain
Due to that, some random configurations fail to build when
BR2_TOOLCHAIN_EXTERNAL_GDB_SERVER_COPY=y, for example with the Bootlin
toolchains for Microblaze or OpenRISC (because there's no GDB support
for those architectures).
One solution could be to make "Could not find gdbserver in external
toolchain" a warning instead of a hard error, but then nobody would
notice about this issue, in cases where it should legitimately abort
with a hard error.
So, the clean solution would be to add a
BR2_TOOLCHAIN_EXTERNAL_HAS_GDBSERVER. But that means all existing
external toolchains would have to be modified to select this option.
Instead, and as an exception, we chose to use inverted logic, and
create an option that is the opposite:
BR2_TOOLCHAIN_EXTERNAL_HAS_NO_GDBSERVER. By default, we assume
external toolchains have gdbserver. If
BR2_TOOLCHAIN_EXTERNAL_HAS_NO_GDBSERVER is enabled, we disallow the
BR2_TOOLCHAIN_EXTERNAL_GDB_SERVER_COPY option.
Note that the case of custom external toolchain does not matter: by
definition they are not tested by the autobuilders, and by definition,
we cannot know in menuconfig if the custom toolchain has or does not
have gdbserver. We could make a user-visible option for it, but that
adds no value over simply erroring out because the gdbserver binary
can't be found.
Similarly, we could add
default y if BR2_PACKAGE_GDB_ARCH_SUPPORTS
but that would make it impossible for someone to include a custom
gdbserver in their external toolchain, and gives no benefit at all.
This will help fixing:
http://autobuild.buildroot.net/results/6315ef7b66ee4ae8f870c92186bc674d65f62f2c/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This commit regenerates the toolchain-external-bootlin Config.in file
after the ARM toolchain description was modified to make sure they
only match the ARM little endian configurations.
Fixes:
http://autobuild.buildroot.net/results/7befbb686bb972016ba4e742976dcdb3fed1be11/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This commit allows to get a proper description of the dependencies for
the RISC-V 64-bit toolchain, that includes the BR2_USE_MMU dependency.
Fixes:
http://autobuild.buildroot.net/results/d6aee9b275b1ec399aea59758ac8f69fdc5691fc/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This commit is simply the result of regenerating the
toolchain-external-bootlin package after gen-bootlin-toolchains was
changed in commit "support/scripts/gen-bootlin-toolchains: properly
take into account !BR2_STATIC_LIBS for glibc toolchains".
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The gcc toolchain is also released for an aarch64 host target and allow
that configuration to be used as part of the configuration. Tested on
on a aarch64 linux docker.
Signed-off-by: Charles Hardin <ckhardin@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This reverts commit 8e91385a2c.
This commit is incorrect, as it is perfectly valid for
BR2_TOOLCHAIN_EXTERNAL_PATH to be empty. The help text of
BR2_TOOLCHAIN_EXTERNAL_PATH even documents it as a supported case:
If empty, the compiler will be searched in $PATH.
Commit 392b0a26f5 ("toolchain-external:
default BR2_TOOLCHAIN_EXTERNAL_PATH to empty") even made that the
default saying "In addition, it in fact works correctly when it is
empty. In that case, the toolchain will be searched in PATH."
A user has reported that commit
8945ba4948 (the backport of 8e91385a2c to
the 2022.02.x LTS branch) breaks his use-case:
https://lore.kernel.org/buildroot/CADBnMvhgaozAgZgy3njckjL1i0U6bZ0fLrq-kdFF-qpGhFWgmw@mail.gmail.com/
Reported-by: Kristof Havasi <havasiefr@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr: reference 8e91385a2c on master]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This patch allows to use an external toolchain based on gcc 12.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Convert BR2_TOOLCHAIN_EXTERNAL_PATH to an absolute path when used.
Otherwise the symbolic links to the external toolchain binaries are
not installed in host/bin when BR2_TOOLCHAIN_EXTERNAL_PATH is relative.
This happens because TOOLCHAIN_EXTERNAL_INSTALL_WRAPPER
changes directory into host/bin to create the symbolic links.
From there the tools are no longer found via the relative path and
a single symbolic link host/bin/$(prefix)-* is created instead.
Although relative paths sounds like something less than ideal to put in
a Buildroot configuration, it's actually rather typical to put the
buildroot sources as a submodule (or subdirectory) of custom sources
(either in a BR2_EXTERNAL or not), in which case the relative path is
well-defined.
Signed-off-by: Juergen Stuber <juergen@jstuber.net>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The OpenRISC toolchains have been rebuilt once again, this time with
the _REENTRANT fixed merged in commit
98e39dc80e ("package/gcc: define
_REENTRANT for OpenRISC when -pthread is passed")
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The Bootlin toolchains for the OpenRISC architecture have been rebuilt
with the fix for binutils bug 28735, so let's update their definition
in Buildroot.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Following the releases of 2021.11 Bootlin toolchains, this commit
represents the result of re-running the gen-bootlin-toolchains script.
The only part that isn't auto-generated are the contents of
Config.in.legacy, which account for the replacement of the RISC-V LP64
toolchain by RISC-V LP64D toolchains.
The complete set of runtime test cases was verified on Gitlab CI:
https://gitlab.com/tpetazzoni/buildroot/-/pipelines/437767674
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
`which' has been discontinued after 2.21 release in 2015 due this (git
repository is empty [1]) and version shipped in Debian produces warning
[2]:
/usr/bin/which: this version of `which' is deprecated; use `command -v' in scripts instead.
`command is POSIX [3] and supported on all common shells (bash, zsh,
dash, busybox sh, mksh).
Patch tested on dash as the default shell.
[1] https://git.savannah.gnu.org/cgit/which.git
[2] 3a8dd10b45
[3] https://pubs.opengroup.org/onlinepubs/9699919799/utilities/command.html
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Update to gcc 10.3, gdb 10.2, binutils 2.36.1, glibc 2.33.
Remove BR2_TOOLCHAIN_HAS_NATIVE_RPC since the support for obsolete
RPC was finally dropped in glibc in 2.32 (2020-08-04).
See "Release Note":
https://developer.arm.com/open-source/gnu-toolchain/gnu-a/downloads#
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Update to gcc 10.3, gdb 10.2, binutils 2.36.1, glibc 2.33.
Remove BR2_TOOLCHAIN_HAS_NATIVE_RPC since the support for obsolete
RPC was finally dropped in glibc in 2.32 (2020-08-04).
See "Release Note":
https://developer.arm.com/open-source/gnu-toolchain/gnu-a/downloads#
Tested with qemu_aarch64_virt_defconfig.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Update to gcc 10.3, gdb 10.2, binutils 2.36.1, glibc 2.33.
Remove BR2_TOOLCHAIN_HAS_NATIVE_RPC since the support for obsolete
RPC was finally dropped in glibc in 2.32 (2020-08-04).
See "Release Note":
https://developer.arm.com/open-source/gnu-toolchain/gnu-a/downloads#
Tested with qemu_arm_vexpress_defconfig.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
gcc installs a libstdcxx-...so-gdb.py file that gdb will load automatically
when it loads libstdcxx.so, via the mechanism described at [1].
However, the auto-load file installed by gcc contains hardcoded paths
referring to the location where the (external) toolchain was built, which
are normally not available.
Fix up the paths in the load file so that the pretty printers can be loaded
automatically.
Note that gdb will only auto-load the file if its location is marked as
'safe'. A subsequent commit will take care of that.
Technically, there could be more than one load file, e.g. in lib and
usr/lib, so fix them all. This was for example observed in
BR2_TOOLCHAIN_EXTERNAL_ARM_AARCH64.
In a very specific case with a local custom toolchain, there were actually
two 'python' directories, which would break the sed command, so arbitrarily
limit to the first one encountered.
[1] https://sourceware.org/gdb/onlinedocs/gdb/objfile_002dgdbdotext-file.html
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch allows to use an external toolchain based on gcc 11.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The Bootlin PowerPC 440 FP toolchain was rebuilt in version 2020.08-2,
which is rebased on Buildroot 2020.08.3 as that includes a fix for
SecurePLT support.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The RISC-V 32-bit toolchain is using a recent glibc version that no
longer has RPC support. Thanks to the change in
gen-bootlin-toolchains, this is now properly detected.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/849510531
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
