Remove BR2_INET_IPV6 select for predefined external toolchains.
Remove the (non)IPv6 option prompt since it's now mandatory.
And force the toolchain check now that internal uclibc is always built
with IPv6 support and external non-IPv6 toolchains are disallowed.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Normally we'd deprecate them, but:
1) They don't support IPv6 and it's being removed so it makes no sense.
2) They're based on uClibc 0.9.30-ish which is very old and surely has
package build breakage all over it.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It's required in some 32-bit architectures for the extended (64-bit)
atomic operations, like __sync_add_and_fetch_8.
These arches are at least: i386, mips & mipsel.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
There's no need for toolchains or the user to declare largefile support
since it's now mandatory.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With this change we add pre-built external toolachins for DesignWare ARC
cores. All currently existed flavours are supported:
* ARC 700 and ARC HS cores
* Little- and big-endian configurations
These pre-built tools are built with build scripts available here
(https://github.com/foss-for-synopsys-dwc-arc-processors/toolchain/tree/arc-2014.12)
and correspond to arc-2014.12 release of sources.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Anton Kolesov <akolesov@synopsys.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
The computation of TOOLCHAIN_EXTERNAL_BIN has a special case for
Blackfin, where it's set to
$(TOOLCHAIN_EXTERNAL_INSTALL_DIR)/$(TOOLCHAIN_EXTERNAL_PREFIX)/bin
instead of $(TOOLCHAIN_EXTERNAL_INSTALL_DIR)/bin for other
architectures.
However, this is actually only true for Analog Devices pre-built
toolchains. Other Blackfin external toolchains (such as ones built by
Buildroot) do not have this special organization.
Therefore, in order to make those non-ADI Blackfin toolchains work, we
need to change the condition from BR2_bfin to testing specifically for
the ADI toolchains.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The recommended form is without the trailing slash. Buildroot will add a slash
between FOO_SITE and FOO_SOURCE as appropriate.
Reported-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add a new option BR2_GCC_ENABLE_LTO that builds gcc and binutils with
LTO support.
Individual packages still have to enable LTO explicitly by passing '-flto' to
GCC, which passes it on to the linker. This option does not add that flag
globally. Some packages detect if the compiler supports LTO and enable the flag
if it does.
To support LTO, ar and ranlib must be called with an argument which triggers the
usage of the LTO plugin. Since GCC doesn't call these tools itself, it instead
provides wrappers for ar and ranlib that pass the LTO arguments. This way
existing Makefiles don't need to be changed for LTO support. However, these
wrappers are called <tuple>-gcc-ar which matches the pattern to link to the
buildroot wrapper in the external toolchain logic. So the external toolchain
logic is updated to provide the correct symlink.
[Thomas:
- Add a separate BR2_BINUTILS_ENABLE_LTO option to enable LTO
support in binutils. This is a blind option, selected by
BR2_GCC_ENABLE_LTO. It just avoids having binutils.mk poke
directly into gcc Config.in options.
- Remove the check on the AVR32 special gcc version, which we don't
support anymore.
- Adapt the help text of the LTO Config.in option to no longer
mention "Since version 4.5", since we only support gcc >= 4.5 in
Buildroot anyway.
- Fix typo in toolchain-external.mk comment.]
Signed-off-by: Peter Kümmel <syntheticpp@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This toolchain is AMD64-only so restrict it accordingly.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add support for AMD steamroller optimizations, available in gcc 4.8+ as
bdver3.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
These have been deprecated since 2014.02
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
External toolchain can also have been generated by Buildroot previously, as
the list that follows demonstrates. Rephrase the paragraph describing what an
external toolchain is as suggested by Thomas Petazzoni, to make it clearer.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Slightly reword a comment to no longer mention avr32.
This part dealing with sysroot detection will have to be reworked, now
that we got rid of avr32: we can now require a fully sysroot-aware
toolchain, i.e. at least gcc-4.4.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
CC: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, all the installation work of the toolchain-external package
is done during the install-staging step. However, in order to be able
to properly collect the size added by each package to the target
filesystem, we need to make sure that toolchain-external installs its
files to $(TARGET_DIR) during the install-target step.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Jérôme Pouiller <jezz@sysmic.org>
Getting the hashes from upstream is not always possible:
- Mentor's Sourcery: seems to require an account
- TI's Arago: not able to locate the upstream.
- Linaro: only signatures
- Misc other toolchains.
So, all hashes were locally computed.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Those toolchains are downloaded from Sourceforge, and are therefore
affected by the Sourcefoge download issues. Therefore, this commit
adds the hashes for those toolchain tarballs.
Fixes:
http://autobuild.buildroot.org/results/fa5/fa5e38246dddd661f1d674f3521d21297796bce3/
(and other similar issues)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since a while, the semantic of BR2_PREFER_STATIC_LIB has been changed
from "prefer static libraries when possible" to "use only static
libraries". The former semantic didn't make much sense, since the user
had absolutely no control/idea of which package would use static
libraries, and which packages would not. Therefore, for quite some
time, we have been starting to enforce that BR2_PREFER_STATIC_LIB
should really build everything with static libraries.
As a consequence, this patch renames BR2_PREFER_STATIC_LIB to
BR2_STATIC_LIBS, and adjust the Config.in option accordingly.
This also helps preparing the addition of other options to select
shared, shared+static or just static.
Note that we have verified that this commit can be reproduced by
simply doing a global rename of BR2_PREFER_STATIC_LIB to
BR2_STATIC_LIBS plus adding BR2_PREFER_STATIC_LIB to Config.in.legacy.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
The CodeSourcery toolchains have a very interesting feature: they warn
the user when an unsafe header or library path is used, i.e a path
that will lead host headers or libraries to leak into the build.
This commit adds a similar functionality into our external toolchain
wrapper, so that it can be used with all external toolchains, and can
also be tuned as needed. By default, the external toolchain wrapper
now gives warnings such as:
arm-linux-gcc: WARNING: unsafe header/library path used in cross-compilation: '-I /usr/foo'
arm-linux-gcc: WARNING: unsafe header/library path used in cross-compilation: '-L /usr/bleh'
but the compilation continues successfully. One can then easily grep
in his build log to search for occurences of this message.
Optionally, if BR_COMPILER_PARANOID_UNSAFE_PATH is defined in the
environment to a non empty value, the external wrapper will instead
error out and abort the compilation.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Romain Naour <romain.naour@openwide.fr>
Tested-by: Romain Naour <romain.naour@openwide.fr>
- Fix the help message for CodeSourcery MIPS toolchains
- Add a hash file
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some crazy folks use MIPS machines as build machines. ;-)
On MIPS, the only acceptable hash-style is 'sysv', because the MIPS ABI
defines that the GOT ordering to be the same as the symbols ordering,
while GNU hash requires symbols to be sorted by their hash.
Looking at binutils' code, it seems that only MIPS suffers from that
limitation.
Currently, we force the toolchain wrapper to be linked with both hash
styles, which breaks on MIPS.
So, fix that by singling out MIPS, and use sysv in that case, and both
otherwise.
Reported-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Tested-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump the ARM, ARMeb and AArch64 Linaro toolchains from 14.08 to
14.09. We can't bump to 14.10, because they completely changed the
toolchains and they are now completely broken: they switched from
Crosstool-NG to a new build tool to generate the toolchain, and now
the sysroot handling is completely borked.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since the BR2_GCC_TARGET_TUNE value is always empty now, there is no
longer a point in using it in the external toolchain logic.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Refactor the toolchain-external Config.in file to use the
BR2_ARM_CPU_ARM*. All of the changes are purely mechanical, except for
the Arago ARMv5 toolchain: it had a 'depends on BR2_GCC_TARGET_ARCH !=
"armv5t"', but armv5t was not a possible value for
BR2_GCC_TARGET_ARCH. Since the toolchain is ARMv5TE, the only ARM
architectures we need to exclude are ARMv4 and ARMv4T.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 2d312b7b61 had a typo
"." instead of "_" in BR2_TOOLCHAIN_HEADERS_AT_LEAST_3.17.
This made selecting 3.17 as custom external headers version
impossible.
Signed-off-by: Karoly Kasza <kaszak@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Buildroot coding style defines one space around make assignments and
does not align the assignment symbols.
This patch does a bulk fix of offending packages. The package
infrastructures (or more in general assignments to calculated variable
names, like $(2)_FOO) are not touched.
Alignment of line continuation characters (\) is kept as-is.
The sed command used to do this replacement is:
find * -name "*.mk" | xargs sed -i \
-e 's#^\([A-Z0-9a-z_]\+\)\s*\([?:+]\?=\)\s*$#\1 \2#'
-e 's#^\([A-Z0-9a-z_]\+\)\s*\([?:+]\?=\)\s*\([^\\]\+\)$#\1 \2 \3#'
-e 's#^\([A-Z0-9a-z_]\+\)\s*\([?:+]\?=\)\s*\([^\\ \t]\+\s*\\\)\s*$#\1 \2 \3#'
-e 's#^\([A-Z0-9a-z_]\+\)\s*\([?:+]\?=\)\(\s*\\\)#\1 \2\3#'
Brief explanation of this command:
^\([A-Z0-9a-z_]\+\) a regular variable at the beginning of the line
\([?:+]\?=\) any assignment character =, :=, ?=, +=
\([^\\]\+\) any string not containing a line continuation
\([^\\ \t]\+\s*\\\) string, optional whitespace, followed by a
line continuation character
\(\s*\\\) optional whitespace, followed by a line
continuation character
Hence, the first subexpression handles empty assignments, the second
handles regular assignments, the third handles regular assignments with
line continuation, and the fourth empty assignments with line
continuation.
This expression was tested on following test text: (initial tab not
included)
FOO = spaces before
FOO = spaces before and after
FOO = tab before
FOO = tab and spaces before
FOO = tab after
FOO = tab and spaces after
FOO = spaces and tab after
FOO = \
FOO = bar \
FOO = bar space \
FOO = \
GENIMAGE_DEPENDENCIES = host-pkgconf libconfuse
FOO += spaces before
FOO ?= spaces before and after
FOO :=
FOO =
FOO =
FOO =
FOO =
$(MAKE1) CROSS_COMPILE=$(TARGET_CROSS) -C
AT91BOOTSTRAP3_DEFCONFIG = \
AXEL_DISABLE_I18N=--i18n=0
After this bulk change, following manual fixups were done:
- fix line continuation alignment in cegui06 and spice (the sed
expression leaves the number of whitespace between the value and line
continuation character intact, but the whitespace before that could have
changed, causing misalignment.
- qt5base was reverted, as this package uses extensive alignment which
actually makes the code more readable.
Finally, the end result was manually reviewed.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Cc: Yann E. Morin <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This new toolchain release fixes a number of issues found with the previous
one. In particular, the issues with fallocate64, prlimit64 and the
ill-installed linux headers seem to be fixed now.
Therefore, there's not need to sanitize the headers for this toolchain and some
packages should now build fine (e.g. fio).
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The 2014R1 toolchain is provided in two flavours by Analog Devices:
one based on gcc 4.3.x, which is considered stable, and one based on
gcc 4.5.x, considered experimental. In commit
5a65b8e185 ("toolchain-external: add ADI
Blackfin 2014R1 toolchain, remove 2012R1") both variants were added.
However, after some testing in the autobuilders, and discussion with
the Analog Devices folks, it turns out that the experimental version
of the toolchain is too experimental. It causes numerous build
failures, and the Analog Devices folks clearly say that it's an early
release and that they expect quite a few problems to show up.
Therefore, this commit removes the experimental flavor and keeps only
the stable variant. Note that the removal/renaming of the Config.in
options is not a problem, since those options were added after the
2014.05 release.
Fixes:
http://autobuild.buildroot.org/results/2a9/2a9d9c332a206fdb46bc8ba022c74d23082a6312/http://autobuild.buildroot.org/results/e1c/e1ce0c1cdd0139208dddaa8f2441ab0e3ab2385e/http://autobuild.buildroot.org/results/993/993aca3f4719afaa4b37524f9136fb8cdc53a066/
and more.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
However, this toolchain is only usable for e500v2 with the SPE ABI.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Ryan Barnett <ryan.barnett@rockwellcollins.com>
And while we're at it, factorize the definition of the musl version,
since it's common to the definition of the tarball names for the
various supported architectures.
[Peter: Adjust Config.in info to match new version]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit adds support for two ADI Blackfin toolchains: the 'stable'
2014R1 based on gcc 4.3, and the 'experimental' 2014R1 based on gcc
4.5.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
For some reason, there is no ARMeb toolchain available in the 2014.05
Linaro release.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
The major changes are: switch to gcc 4.9 instead of 4.8, and switch to
glibc 2.19 instead of glibc 2.18.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Linaro toolchains are released so frequently (every month) that it
doesn't make much sense to support 3 consecutive versions. So, like we
do for ARM big-endian, let's support only one version at a time.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Linaro toolchains are released so frequently (every month) that it
doesn't make much sense to support 3 consecutive versions. So, like we
do for ARM big-endian, let's support only one version at a time.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
When getting the sysroot used for the kernel headers version check,
passing TOOLCHAIN_EXTERNAL_CFLAGS causes a problem when used with
multilib toolchains, where only the main sysroot has the header files,
and the other sysroots only have the libraries.
Since the kernel headers version used is normally the same for all
sysroots, this commit solves this problem by removing the
TOOLCHAIN_EXTERNAL_CFLAGS argument when calling
toolchain_find_sysroot, so that it returns the main sysroot, in which
<linux/version.h> can be found for the kernel headers version check.
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Since the introduction of the kernel headers Config.in options, the
external toolchain logic had a check for custom external toolchains to
verify that the kernel headers version entered by the user matches the
one of the toolchain. However, this check was not made for non-custom
external toolchains (i.e the built-in profiles, such as Linaro,
CodeSourcery and al.), making the assumption that the Buildroot
developers will do the right selection.
However, it is quite nice when bumping external toolchains to have
this automatic kernel headers version check, to ensure we select the
appropriate kernel headers version.
Therefore, this commit makes the kernel headers version check
applicable to non-custom external toolchains.
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas: fix BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_15 to select
BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_14 and not itself.]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As reported by William Welch <bvwelch@gmail.com>, the Musl external
toolchain provided by the musl-cross project is only Microblaze
big-endian. In fact, Musl seems to only support the big endian variant
of the Microblaze architecture, with the microblaze-* tuple.
This commit makes sure the Musl pre-built external toolchain provided
by musl-cross can only be selected for a big-endian Microblaze
configuration.
Reported-by: William Welch <bvwelch@gmail.com>
Cc: William Welch <bvwelch@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In commit cd32da8f79
("toolchain-external: add Linaro ARM big endian toolchain") a mistake
was made, probably due to a rebase conflict that was incorrectly solved:
the call to the post install staging hook that creates the necessary
symbolic links for a root filesystem based on Linaro 2014.02 to work
was removed.
This commit reinstates this call, which should fix the problem
observed by Maxime Hadjinlian while using Linaro 2014.02.
Reported-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit adds ten toolchains based on the musl C library that are
publicly available from the musl-cross project.
[Peter: fix ppc prefix, only for classic ABI]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit slightly improves the external toolchain backend, and the
gdb build logic to create a file named
$(STAGING_DIR)/usr/share/buildroot/gdbinit which can be used as a
gdbinit file using gdb -x option. This allows gdb to automatically use
the proper sysroot to find libraries.
The initial insight for this patch comes from the report of Oded
Hanson <OHanson@xsightsys.com>, who found an issue with the Eclipse
Buildroot plugin, which was setting a solib-path in gdb, but not a
sysroot. Setting a solib-path was enough to find shared libraries, but
not the dynamic linker. And since Eclipse doesn't allow to set the
sysroot in any other way than giving a gdbinit file, it makes sense to
have Buildroot generate a gdbinit file (which can be used in other
situations than Eclipse).
To achieve this, this commit introduces a gen_gdbinit_file helper in
toolchain/helpers.mk, and uses it for the internal toolchain and
external toolchain backends.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[ThomasDS: minor updates in commit message]
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Linaro has started to release ARM big endian toolchains, so we
integrate this toolchain in the external toolchain logic of
Buildroot. Since ARM big endian is probably going to be a lot more
uncommon than ARM little endian, we will only support one version at a
time of this toolchain.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The information "To use this toolchain, you must disable soft float
usage." which was visible in the help text of Linaro toolchains is no
longer useful, since those toolchains are only visible when the ARM
EABIhf ABI is selected, which by design is not compatible with
soft-float.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
The Nios-II Sourcery external toolchain (the only Nios-II we currently
support) exports broken kernel headers. In particular, these kernels should
be exported using the "headers_install" rule which applies a set of fixes
on the kernel headers so they are suitable for userspace usage.
In order to fix this, add a post-install hook to perform the header fixes
ourselves. The result is equivalent to apply the "headers_install" rule.
Fixes:
http://autobuild.buildroot.net/results/c32/c32ad4bac5f651502e551f7733f702afaa0e742a/
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Old toolchains, with old gcc that do not support -print-sysroot, break the
kernel-headers version check script: it fails to find the sysroot of the
toolchain, and thus ends up including the host's linux/version.h.
Most of the time, this will break early, since the host's kernel headers
will not match the toolchain settings.
But it can happen that the check is succesful, although the configuration
of the toolchain is wrong:
- the custom toolchain has kernel headers vX.Y
- the user selected vX.Z (Z!=Y)
- the host has headers vX.Y
In this case, the check passes OK, but the build of some packages later on
will break (which is exactly what those _AT_LEAST_XXX options were added to
avoid).
Fix that by passing the sysroot to the check script, instead of the cross
compiler.
We get the sysroot as thus:
- for custom toolchains, we use the macro toolchain_find_sysroot. We can
do that, because we already have a complete sysroot with libc.a at that
time.
- for internal toolchain using a custom kernel headers version, we just
use $(STAGING_DIR). We can't use the macro as for custom toolchains
above, because at the time we install the kernel headers, we do not yet
have a complete sysroot with a libc.a. But we can just use
$(STAGING_DIR), since we're only interested in the kernel headers.
For all other types of toolchains, we already have the _AT_LEAST_XXX options
properly set, so we need not add a check in this case.
Fixes:
http://autobuild.buildroot.net/results/f33/f331a6eff0b0b93c73af52db3a6b43e4e598577e/http://autobuild.buildroot.net/results/a57/a5797c025bec50c10efdcff74945aab4021d05e4/
[...]
[Thanks to Thomas for pointing out the toolchain_find_sysroot macro!]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Like ARM ones, the Linaro AArch64 toolchains expect libraries in
/lib/aarch64-linux-gnu and /usr/lib/aarch64-linux-gnu, but Buildroot
always installs them in /lib and /usr/lib. Therefore, this commit adds
the appropriate symbolic links, just like we're already doing for
Linaro ARM toolchains.
Reported-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
On x86, the symbolic link ld-musl-<ARCH>.so.1 to libc.so must be
ld-musl-i386.so.1 in all cases, but $(ARCH) in Buildroot might be
i386, i486, i586, i686, etc. depending on the specific x86 variants
being selected.
This commit fixes that by creating a MUSL_ARCH variable set to i386 on
x86, and to $(ARCH) on other architectures.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The user-facing variables should be prefixed with BR2_, not BR_.
Also quote the variable in the manual.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Ensure the kernel headers version used in the custom external toolchain,
or the manually-specified kernel headers version, matches exactly the one
selected by the user.
We do not care about the patch-level, since headers are not supposed to
change between patchlevels. This applies only to kernels >= 3.0, but
those are actually the ones we do care about; we treat all 2.6.x kernels
as being a single version, since we do not support any 2.6 kernels for
packages with kernel-dependant features.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Select the appropriate BR2_TOOLCHAIN_HEADERS_AT_LEAST_XXX options for the
external, custom toolchain backend.
We try to be conservative here, and default to kernel headers 2.6.x.
[Thomas: remove duplicated depends on BR2_TOOLCHAIN_EXTERNAL_CUSTOM,
since the choice is already inside a if BR2_TOOLCHAIN_EXTERNAL_CUSTOM
... endif block.]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Select the appropriate BR2_TOOLCHAIN_HEADERS_AT_LEAST_XXX options for the
external, pre-defined toolchains.
Also annotate those toolchain with older-than-3.0 headers.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As our architecture support expands to a number of architectures that
do not implement NPTL threading, and the number of packages that
depend on NPTL specific features, it has become necessary to be able
to know whether the toolchain has NPTL support or not.
This commit adds a new BR2_TOOLCHAIN_HAS_THREADS_NPTL hidden Config.in
option that allows packages to know whether NPTL is available or not.
This hidden option is:
* Automatically enabled when glibc/eglibc or musl toolchains are
used, either internal or external.
* Automatically enabled when an internal uClibc toolchain with NPTL
support is configured. It is left disabled otherwise for internal
uClibc toolchains.
* Configured according to a visible Config.in option for custom
external uClibc toolchains.
[Peter: factor _EXTERNAL_HAS_THREADS in single if as suggested by Arnout]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit makes the dependency from the target toolchain explicit.
This way we can buid from command line a package that use
inner-generic-package right after the configuration phase, example:
make clean <package-name>
Also remove TARGETS_ALL because the only purpose was to add toolchain
dependency so it's superseded by this commit.
To prevent circular dependency add the new variable
<pkgname>_ADD_TOOLCHAIN_DEPENDENCY to avoid adding the toolchain
dependency for toolchain packages.
This is also a step forward supporting top-level parallel make.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
AMD Jaguar ( https://en.wikipedia.org/wiki/Jaguar_%28microarchitecture%29 ) is
suddenly a popular architecture since it is used in the PS4 and the XBox One.
Many embedded systems are also likely to use it in the next years.
This patch adds support for GCC architecture-specific optimisations and
tuning for these CPUs.
These optimizations are available with GCC 4.8+.
Signed-off-by: Adrien Beraud <adrien.beraud@savoirfairelinux.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently ld-linux-armhf.so.* is added to external libs when
using an EABIhf toolchain, but this naming is not used by uClibc.
Fix by adding a check for glibc.
Signed-off-by: Stefan Sørensen <stefan.sorensen@spectralink.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In order to keep better track of when a feature got deprecated, and hence
when it can be removed, a new set of symbols BR2_DEPRECATED_SINCE_xxxx_xx is
introduced. These symbols are automatically selected when BR2_DEPRECATED is
selected, and thus are transparent to the user.
A deprecated feature will no longer depend on BR2_DEPRECATED directly, but
rather on the appropriate BR2_DEPRECATED_SINCE_xxxx_xx. If that symbol does
not yet exist, it has to be created in Config.in.
When removing a deprecated feature, one should also check whether this was
the last feature using the BR2_DEPRECATED_SINCE_xxxx_xx symbol, in which
case the latter can be removed from Config.in.
A followup patch will make sure the overview is added to the list of
deprecated features in the manual, so that a buildroot core developer can
easily determine which features to remove in a given development cycle.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In our wrapper, we forcibly add the -march=, -mcpu= and-mtune= flags
to the actual compiler, this in an attempt to always generate correct
and optimised code for the target.
But in some cases, the caller knows better than we do, and passes its
own set, or subset of those flags. In this case, some may conflict with
the ones we pass. The most prominent offender being the Linux kernel.
For example, on the ARM Raspberry Pi, the Linux kernel will set the
-march=armv6 flag and no -mcpu= flag, but we pass -mcpu=arm1176jzf-s,
which conflicts:
drivers/scsi/scsi_trace.c:1:0: warning: switch -mcpu=arm1176jzf-s
conflicts with -march=armv6 switch
(and so for all the files the kernel compiles, pretty messy)
(note: arm1176jzf-s is not an armv6, it is an armv6zk. Yeah...)
To avoid this situation, we scan our commandline for any occurence of
the possibly conflicting flags. If none is found, then we add our owns.
If any is found, then we don't add any of our owns.
The idea behind this is that we trust the caller to know better than
we do what it is doing. Since the biggest, and sole so far, offender
is the Linux kernel, then this is a rather safe bet.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Xilinx Microblaze external toolchains that we had support for are
very old, and are causing a huge number of build issues. Thanks to
Spenser Gilliland, we now have support for Microblaze in the internal
toolchain backend, and the autobuilders have been using the internal
toolchain backend since then. Therefore, it's time to deprecate those
old and unusable external toolchains.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add Linaro ARM 2013.10 and Linaro ARM 2013.11, and remove Linaro ARM
2013.07 and Linaro ARM 2013.08.
The main change for those versions is the switch to eglibc 2.18.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds the support for the recently release Sourcery MIPS
2013.11 toolchain (gcc 4.8, gdb 7.6, glibc 2.18), and consequently
removes the support for the Sourcery MIPS 2012.03 toolchain.
While we're at it, also fix the incorrect help text related to the
MIPS64 multilib selection.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
This commit adds the support for the recently release Sourcery ARM
2013.11 toolchain (gcc 4.8, gdb 7.6, glibc 2.18), and consequently
removes the support for the Sourcery ARM 2011.09 toolchain.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
(e)glibc doesn't support a fully statically linked userspace. Even a
basic program such as Busybox fails to do authentication due to glibc
loading some libraries dynamically. Therefore, we disable the
possibility of using a (e)glibc toolchain when
BR2_PREFER_STATIC_LIB=y.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch fixes the following whitespace problems in Config.in files:
- trailing whitespace
- spaces instead of tabs for indentation
- help text not indented with tab + 2 spaces
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Based on a suggestion from Peter, this commit factorizes the logic and
regular expressions that are used to find the sysroot and libdir for a
given compiler. It reduces a bit the duplication of code, and
centralizes the most bizarre part of this logic in one place.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Peter: drop extra # as pointed out by Baruch Siach]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In a1d94aaa3a ('toolchain-external: add support for musl C
library'), we made the following change to the SYSROOT_DIR mangling
logic:
- SYSROOT_DIR=`echo $${LIBC_A_LOCATION} | sed -r -e 's:usr/lib(32|64)?/(.*/)?libc\.a::'` ; \
+ SYSROOT_DIR=`echo $${LIBC_A_LOCATION} | sed -r -e 's:(usr/)?lib(32|64)?/(.*/)?libc\.a::'` ; \
This was needed to accomodate for musl based toolchains that don't
have libc.a in usr/lib/..., but directory in lib/... Basically, the
change makes the usr/ at the beginning optional.
However, with the very permissive (.*) matching in the middle of the
path, the change above had an unexpected consequence: any path contain
'/lib' would be truncated before this lib. As an example, Peter
reported that his builds, running from /var/lib/buildbot/ were no
longer working because the SYSROOT_DIR was decided to be /var instead
of something like
/var/lib/buildbot/buildroot/output/host/opt/ext-toolchain/arm-linux-gnueabihf/libc/.
So, this commit changes (again!) this regexp by changing (.*) to
([^/]*), the idea being that it will match only *one* path
component. Note that this intermediate (.*) directory was added in
e6e60becb0 ('external-toolchain: add support for Linaro 2012.01') to
accomodate for Linaro toolchains that have a subdirectory in their
sysroot named after the target tuple:
$ ./output/host/opt/ext-toolchain/bin/arm-linux-gnueabihf-gcc -print-file-name=libc.a
/home/thomas/projets/buildroot/output/host/opt/ext-toolchain/bin/../arm-linux-gnueabihf/libc/usr/lib/arm-linux-gnueabihf/libc.a
In addition to this, this commit also makes sure that the change
making usr/ optional is properly reported on all the instances of this
regular expression.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
For configurations using a toolchain that is preinstalled on
the host, <pkg>_SITE and <pkg>_SOURCE variables must be kept
empty to avoid downloading any toolchain package.
The actual implementation has been proposed by Thomas Petazzoni.
Signed-off-by: GONZALEZ Laurent <br2@gezedo.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As Samuel Martin noticed, libthread_db is not only needed when
cross-gdb+gdbserver is used, but also when the native gdb is used on
the target. As a consequence, this patch modifies the glibc package
and the external toolchain logic to ensure that libthread_db is copied
to the target either when the native gdb or gdbserver is enabled, by
relying on the BR2_PACKAGE_GDB option, which is enabled when native
gdb and/or gdbserver are enabled.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Maxime Ripard reported that the Linaro toolchains were not visible
when selecting a Cortex-A, but forgetting to set the EABI to
EABIhf. While this is expected, Buildroot should normally should a
comment in this case. However, the comment is only visible when the
selected ARM architecture is not ARMv7 *and* the EABI is not
EABIhf. Instead, make the comment visible when either the selected
architecture is not ARMv7 *or* when the selected EABI is not EABIhf.
While we're at it, reword the comment text so that it actually fits
within the limits of the menuconfig screen.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reported-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
In 11ec38b695 ("toolchain-external: fix Linaro ARM toolchain
support"), we fixed the support for Linaro EABIhf toolchains by adding
a /lib/arm-linux-gnueabihf -> /lib symbolic link. This is needed
because the dynamic loader looks for libraries in
/lib/arm-linux-gnueabihf rather than the usual /lib, but Buildroot
installs all libraries in /lib.
However, we forgot that the dynamic loader also loads libraries from
/usr/lib/arm-linux-gnueabihf rather than /usr/lib, so this patch fixes
that by adding the necessary symbolic link.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reported-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Previously, an external-toolchain on a mipsel/mips64el target
didn't select the appriopriate endianness but
it asked the user to set the correct CFLAGS on his/her own.
We fix this by appending "-EL" to the toolchain wrapper options
if the user has selected a mipsel/mips64el target.
[Thomas: remove unneeded test on BR2_ENDIAN, since mipsel and mips64el
are always little-endian, and add the corresponding big endian case.]
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some Config.in(.host) files have constructs like:
config FOO_VERSION
string
default "1.0" if FOO_1_0
default "2.0" if FOO_2_0
default $FOO_CUSTOM_VERSION if FOO_CUSTOM
The dollar sign here is not needed and confusing, so can be removed.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Angstrom toolchains available at
http://www.angstrom-distribution.org/toolchains/ are not usable as
external toolchains in Buildroot, because they are not pure toolchains
with just the C library, but instead complete SDKs with many
cross-compiled libraries (Gtk, Qt, glib, neon, sqlite, X.org, and many
more, approximately 200 MB of libraries).
Buildroot cannot use such toolchains, and while this is documented in
our manual, some users still try to do this. Today, one such user came
on the IRC channel, reporting a build problem, which we started
investigating, only to realize after a long time that he was using an
Angstrom toolchain.
To avoid this problem in the future, we explicitly check if the
toolchain is from Angstrom by looking at the vendor part of the tuple
exposed by the toolchain: as soon as it is
<something>-angstrom-<something-else>, we reject the toolchain with an
explanation.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit fixes bug #6452 (eglibc from Linaro 2013.07 not copied to
target correctly) by:
* Copying only the relevant library loader to the target on ARMhf
(i.e ld-linux-armhf.so and not ld.so*). This is needed since Linaro
toolchains provide two library loaders, one ARMv7 hf, and one ARMv4
soft-float.
* Making sure a $(TARGET_DIR)/lib/arm-linux-gnueabihf/ symbolic link
to $(TARGET_DIR)/lib/ exists, since the dynamic loader of Linaro
toolchains expects libraries to be found in
$(TARGET_DIR)/lib/arm-linux-gnueabihf/.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit adds support for external toolchains based on the musl C
library, as available from http://www.musl-libc.org.
Note that the pre-built musl toolchains available from
http://musl.codu.org/ are not working for the moment, since they lack
sysroot support. However, this problem has been reported to the
maintainer, who has already added sysroot support in his scripts at
https://bitbucket.org/GregorR/musl-cross, and therefore the next
version of the pre-built toolchains should work with Buildroot
out-of-the-box. In the mean time, the musl-cross script must be used
to build the toolchain.
[Peter: reword comment]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Until now, the copy_toolchain_lib_root function took as argument the
base name of a library (e.g: libm.so), and was assuming that the usual
scheme libm.so.<x> being a symbolic link to the real library was used.
However, with musl based toolchains, the C library is named libc.so
directly, with no symbolic link at all. Therefore, this commit changes
the copy_toolchain_lib_root to move the responsibility of using a
wildcard or not after the library name the caller's responsibility.
So, all the existing LIB_EXTERNAL_LIBS values are modified to have a
.* at the end, so that the behavior is effectively unchanged.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The external toolchain code makes the assumption that all C libraries
have a ld*.so, libc.so, libcrypt.so, libdl.so, libgcc_s.so, libm.so,
libnsl.so, libresolv.so, libutil.so, and when thread support is
enabled, libpthread.so, etc.
However, this is not the case with the musl C library, which
integrates all the functionalities in a single libc.so file. In
preparation of the support of the musl library, we make the current
value of LIB_EXTERNAL_LIBS conditional to glibc or uClibc.
The addition of additional libraries through
BR2_TOOLCHAIN_EXTRA_EXTERNAL_LIBS is kept outside the condition, at
the end.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit converts the 'toolchain-external' logic to the package
infrastructure.
The TOOLCHAIN_EXTERNAL_DIR variable (which points to where the
toolchain is located) is renamed to TOOLCHAIN_EXTERNAL_INSTALL_DIR,
because the former conflicts with the package infrastructure (which
defines the <pkg>_DIR variable for each package as pointing to its
build directory).
The new _EXTRA_DOWNLOADS mechanism is used for Blackfin toolchains.
The extract, configuration and installation steps are converted inside
the <pkg>_EXTRACT_CMDS, <pkg>_CONFIGURE_CMDS and
<pkg>_INSTALL_STAGING_CMDS.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The ext-tool.mk logic uses the TOOLCHAIN_EXTERNAL_PREFIX variable
unconditionally, even if the external toolchain is not used. Until now
this wasn't a problem since ext-tool.mk was only included when the
external toolchain backend was selected, but the next patches are
going to include this file unconditionally.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In case there are many arguments passed to the tools, the command line
can get very long, and difficult to parse visually.
For example, the Linux kernel passes a lot of arguments to gcc (at least
45, which gives 53 with our hard-coded args). Looking at such a command
line is daunting.
So, add the possibility to print each argument on its own line.
Also, enclose all args between single quotes, so the command line
can be safely copy-pasted without special chars (spaces, $) being
inrerpreted by the shell.
Add blurb about toolchain-wrapper to documentation at the same
time.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Tested-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Update to the latest update for the 2013.05 toolchain
released on 11 September 2013.
https://sourcery.mentor.com/GNUToolchain/release2554
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This commit refactors how Stack Smashing Protection support is handled
in Buildroot:
*) It turns the BR2_TOOLCHAIN_BUILDROOT_USE_SSP option into an option
that only enables the SSP support in uClibc, when using the internal
toolchain backend.
*) It adds an hidden BR2_TOOLCHAIN_HAS_SSP option that gets enabled
when the toolchain has SSP support. Here we have the usual dance:
glibc/eglibc in internal/external backend always select this
option, in the case of uClibc/internal, it gets selected when
BR2_TOOLCHAIN_BUILDROOT_USE_SSP is enabled, in the case of
uClibc/external, there is a new configuration option that the user
must select (or not) depending on whether the toolchain has SSP
support.
*) It adds a new options BR2_ENABLE_SSP in the "Build options" menu,
to enable the usage of SSP support, by adding
-fstack-protector-all to the CFLAGS.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In order to simplify determining the right extractor tool for a given
file type, this patch introduces a make function 'suitable-extractor'.
Its usage is $(call suitable-extractor,filename), and it returns the
path to the suitable extractor.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This commit adds the pre-built Sourcery CodeBench toolchains
currently available for the Nios-II architecture.
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
* Always link lib64 or lib32 to lib
* Only copy the architecture's lib directory to staging
* Also cleanup a couple of mkdirs (concerning some 'lib' directories).
Before this patch:
$ ls -ld host/usr/x86_64-buildroot-linux-gnu/sysroot/{,usr/}lib* target/{usr/,}lib*
drwxr-xr-x 2 samuel users 4.0K Aug 12 22:26 host/usr/x86_64-buildroot-linux-gnu/sysroot/lib/
drwxr-xr-x 2 samuel users 4.0K Aug 12 22:27 host/usr/x86_64-buildroot-linux-gnu/sysroot/lib64/
drwxr-xr-x 5 samuel users 4.0K Oct 30 2012 host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib/
drwxr-xr-x 5 samuel users 4.0K Aug 12 22:27 host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib64/
drwxr-xr-x 3 samuel users 4.0K Oct 30 2012 host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/libexec/
drwxr-xr-x 2 samuel users 4.0K Aug 12 22:27 target/lib/
lrwxrwxrwx 1 samuel users 3 Aug 12 22:27 target/lib64 -> lib/
drwxr-xr-x 2 samuel users 4.0K Aug 12 22:27 target/usr/lib/
lrwxrwxrwx 1 samuel users 3 Aug 12 22:27 target/usr/lib64 -> lib/
$ find . -type l -xtype l # find broken symlinks
find: `./host/usr/x86_64-buildroot-linux-gnu/sysroot/lib64/lib': Too many levels of symbolic links
find: `./host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib64/lib': Too many levels of symbolic links
./host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib/libnss_files.so
./host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib/libnss_nis.so
./host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib/libnss_compat.so
./host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib/libnss_nisplus.so
./host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib/libutil.so
./host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib/libthread_db.so
./host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib/libcidn.so
./host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib/libcrypt.so
./host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib/libm.so
./host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib/libnss_hesiod.so
./host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib/libnsl.so
./host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib/librt.so
./host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib/libnss_db.so
./host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib/libanl.so
./host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib/libBrokenLocale.so
./host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib/libnss_dns.so
./host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib/libresolv.so
./host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib/libdl.so
./target/etc/resolv.conf
./target/dev/log
After this patch:
$ ls -ld host/usr/x86_64-buildroot-linux-gnu/sysroot/{,usr/}lib* target/{usr/,}lib*
drwxr-xr-x 2 samuel users 4.0K Oct 30 2012 host/usr/x86_64-buildroot-linux-gnu/sysroot/lib/
lrwxrwxrwx 1 samuel users 5 Aug 12 22:36 host/usr/x86_64-buildroot-linux-gnu/sysroot/lib64 -> lib/
drwxr-xr-x 5 samuel users 4.0K Oct 30 2012 host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib/
lrwxrwxrwx 1 samuel users 5 Aug 12 22:36 host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib64 -> lib/
drwxr-xr-x 3 samuel users 4.0K Oct 30 2012 host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/libexec/
drwxr-xr-x 2 samuel users 4.0K Aug 12 22:36 target/lib/
lrwxrwxrwx 1 samuel users 3 Aug 12 22:36 target/lib64 -> lib/
drwxr-xr-x 2 samuel users 4.0K Aug 12 22:36 target/usr/lib/
lrwxrwxrwx 1 samuel users 3 Aug 12 22:36 target/usr/lib64 -> lib/
$ find . -type l -xtype l # find broken symlinks
./target/etc/resolv.conf
./target/dev/log
Fixes http://autobuild.buildroot.net/results/23fb6b1479d2b5906b72c9437b06ab4700ff246d/
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
n32 is not supported in Sourcery CodeBench toolchains.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The external-toolchain infrastructure creates symbolic links for all
tools in the host directory. However, when buildroot builds its own
version of a cross debugger (BR2_PACKAGE_HOST_GDB), and the toolchain
also provides a cross debugger, there would be two symbolic links for
gdb in the host directory, which is confusing.
An example use case is where the external toolchain only provides a
64-bit gdbserver (e.g. Cavium Networks SDK) but the target is completely
32-bit (e.g. n32 ABI). In this case, using gdbserver on target requires
copying a bunch of 64-bit libraries to the target as well, just for gdb.
In this case, one can let buildroot build both gdbserver as cross-gdb
(both in 32-bit).
This patch modifies the symlink creation so that no gdb (or gdbtui)
symlink is created if buildroot is going to build a cross-gdb.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some toolchains, like the Cavium Networks' one, have lib32/ and lib64/
directories, while the standard lib/ is empty. To find libc.a, buildroot
currently only looks in lib/ and lib64/. This patch extends the search
to lib32/ as well.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The linux kernel and uboot specify -msoft-float in order to prevent floating
point code from being generated. This causes a conflict when -mfloat-abi=hard
or -mfloat-abi options are specified in the wrapper. This patch removes the
-mfloat-abi option from the options generated by the wrapper only when
-msoft-float, -mhard-float or -mfloat-abi are specified by the user.
[Peter: fix !BR_FLOAT_ABI case, simplify]
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
If BR_DEBUG_WRAPPER is set in the envirnment, dump the actual command
being exec()uted, to ease debugging issues with the wrapper.
[Peter: adjust code style and output format to be cut'n'paste compatible]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
With modern shells, we can simply do test using the "$(...)" = "value"
form. This commit gets rid of the x$(...) = x"value" constructs and
replaces == by =, which is the correct operator to test the equality
of two strings with the test program.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Following the introduction of the support of EABIhf as a second ARM
ABI, it is important to check whether the external toolchain provided
by the user actually uses the ABI that has been selected in the
Buildroot configuration. This commit introduces such a check by
looking at the 'Tag_ABI_VFP_args' tag of the architecture-specific
section of the ELF headers. This assumes that ELF is the binary format
used on ARM, which may not be the case on ARM noMMU systems (they use
the FLAT binary format), but Buildroot doesn't have support for such
systems at the moment.
Also ensure the correct CFLAGS are passed to the cross compiler for the
test, so the correct variant is used in case the toolchain is multilib.
[Peter: mention CFLAGS change]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Until now, we were using the default ARM instruction set, as used by
the toolchain: the 32 bits ARM instruction set for the internal
backend, and for external toolchain, whatever default was chosen when
the toolchain was generated.
This commit adds support for the Thumb2 instruction set. To do so, it:
* provides a menuconfig choice between ARM and Thumb2. The choice is
only shown when Thumb2 is supported, i.e on ARMv7-A CPUs.
* passes the --with-mode={arm,thumb} option when building gcc in the
internal backend. This tells the compiler which type of
instructions it should generate.
* passes the m{arm,thumb} option in the external toolchain
wrapper. ARM and Thumb2 code can freely be mixed together, so the
fact that the C library has been built either ARM or Thumb2 and
that the rest of the code is built Thumb2 or ARM is not a problem.
[Peter: fix empty BR2_GCC_TARGET_MODE check]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The introduction of the EABIhf ABI requires a few updates to the
configuration options for external toolchains, in order to ensure that
the user doesn't do any invalid selection. In detail:
* The Linaro ARM toolchains now depend on BR2_ARM_EABIHF, because
that's the ABI they use, and it is incompatible with EABI. The
comment about the availability of Linaro toolchains is updated to
inform users selecting EABI that they should select EABIhf if they
want to see Linaro toolchains.
* The Sourcery CodeBench toolchains now depend on BR2_ARM_EABI,
because that's the ABI they use. A comment is added to inform users
that have selected EABIhf that Sourcery CodeBench are only
available when EABI is used.
* The Arago toolchains now depend on BR2_ARM_EABI, because that's the
ABI they use. The description of the ARMv7 Arago toolchain is also
slightly improved.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Now that we have a much better way of selecting between the various
VFP versions and capabilities, the BR2_VFP_FLOAT version no longer
makes sense. This commit gets rid of it, and adds the appropriate
Config.in.legacy code.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Buildroot already has the BR2_GCC_TARGET_{TUNE,ARCH,ABI,CPU} hidden
kconfig strings that allow per-architecture Config.in files to feed
the appropriate values of --with-{tune,arch,abi-cpu} when building
gcc, or the appropriate flags for the external toolchain wrapper.
This commit has two additional options:
BR2_GCC_TARGET_{FPU,FLOAT_ABI}, that allows to define the
--with-{fpu,float} gcc configure options for the internal backend, or
the -m{fpu,float-abi} options for the flags of the external toolchain
wrapper.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
It was confusing to have two different toolchains with the
same label.
Signed-off-by: Jan Viktorin <xvikto03@stud.fit.vutbr.cz>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Currently, when we need to do a conditional on the type of C library
used, we need to take into account the three toolchain backends. As we
are going to add eglibc support to the Buildroot toolchain backend, it
would become even uglier, so this patch introduces two new hidden
options: BR2_TOOLCHAIN_USES_UCLIBC and BR2_TOOLCHAIN_USES_GLIBC, that
exist regardless of the toolchain backend. The entire Buildroot code
base is converted to use those options.
Note that we have intentionally created only one option
(BR2_TOOLCHAIN_USES_GLIBC) for both glibc and eglibc, since they are
essentially the same, as far as Buildroot is concerned.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Instead of using the 'uclibc' target for all toolchain backends,
introduce more sensible target names for the external toolchain and
Crosstool-NG toolchain backend make targets.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
For certain situations, users may want to install shared FLAT
libraries to the target filesystem even if FDPIC is used as the
primary binary format, or symmetrically users may want to install FDPIC
libraries to the target filesystem even if shared FLAT is used as the
primary binary format.
This commit allows that by:
* Offering additional Kconfig options to install shared FLAT or FDPIC
libraries even when those libraries are not selected as the primary
binary format.
* Preserving all Blackfin toolchain folders under the
TOOLCHAIN_EXTERNAL_DIR, instead of keeping only the one related to
the selected binary format.
* Adding some additional install targets that do the installation of
either the shared FLAT or FDPIC libraries when requested.
[Thomas: refactored code, adjusted commit log]
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
If ext-toolchain-wrapper was built with a gcc that uses hash-style 'gnu' by
default, the resulting binary might be unusable on other systems. The error
in this case is "Floating point exception".
Using hash-style 'both' solves this issue.
Signed-off-by: Patrick Ziegler <patrick.ziegler@fh-kl.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Instead of a long list of the ARMv7-A Cortex-A, use a conditional
based on BR2_GCC_TARGET_ARCH to hide/show toolchains that are only
usable on ARMv7-A.
However, in the comment related to Linaro toolchains, we keep
mentioning Cortex-A{5,8,9,15} because that's what users see when they
select their architecture variant.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
We add support for Linaro 2013.04 and Linaro 2013.05 and remove
support for Linaro 2013.01 and Linaro 2013.02.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Remove old 2011.09 release. Allow MIPS64 cores on
2013.05 release since they are supported by the toolchain.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
If ext-toolchain-wrapper or any symbolic link to it was resolved by PATH,
the wrapper takes the working directory to calculate the relative paths.
Now '/proc/self/exe' is used to resolve the absolute path to the toolchain
directory if the wrapper was called neither with a relative nor an absolute
path.
[Peter: fix off-by-one, swap value == var checks around]
Signed-off-by: Patrick Ziegler <patrick.ziegler@fh-kl.de>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
ADI officially supports the buildroot and related GNU toolchain for
Blackfin since ADI's 2012R1 release only. In order to avoid confusion,
it is better to remove the 2011R1 GNU toolchain for Blackfin. In
addition, the 2011R1 GNU toolchain for Blackfin doesn't support the
BF60x processors.
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The external toolchain logic checks (and finds) the proper ARCH_LIB_DIR
and forcibly copies it to */lib even if it's in */lib64
This is all well until the check is done for create_lib64_symlinks which
only verifies if ARCH_SYSROOT_DIR/lib64 is a symlink, which in some
toolchain it's a real directory (like sourcery x86_64 2012.09) and thus
doesn't make the symlink in the target.
Fix this by also checking for a real directory.
Easily reproducible by running "make qemu_x86_64_defconfig", switching
to an external toolchain before build, building and then trying to run
the resulting image.
Closes bug #5054
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Adds the possibility to have a free-form CPU revision string and append it
to the target CPU. Only Blackfin actually uses this option.
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Just introduce the symbol and options in arch generic Config.in.
Append FLAT format link flags to external toolchain wrapper.
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When a FOO_SITE variable ends in a slash and gets joined with a
FOO_SOURCE variable like $(FOO_SITE)/$(FOO_SOURCE), the resulting URI
has a double slash. While double-slashes are fine in unix paths, they
are reserved in URIs - the part following '//' must be an authority.
Signed-off-by: Shawn J. Goff <shawn7400@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Commit 79828fc01d (toolchain-external:
update ARM Linaro toolchains) accidently broke the URL for the Linaro
2013.01 toolchain by replacing a .bz2 extension by .bz. This patch
fixes this problem.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The x86/x86-64 CodeSourcery toolchains use some weird locations for
the gdbserver binary:
$ find . -name 'gdbserver'
./i686-pc-linux-gnu/libc/atom/usr/bin/gdbserver
./i686-pc-linux-gnu/libc/atom/usr/lib/bin/gdbserver
./i686-pc-linux-gnu/libc/core2/usr/bin/gdbserver
./i686-pc-linux-gnu/libc/core2/usr/lib64/bin/gdbserver
./i686-pc-linux-gnu/libc/usr/lib/bin/gdbserver
./i686-pc-linux-gnu/libc/usr/lib64/bin/gdbserver
Notice that it's sometimes hidden in a usr/{lib,lib64}/bin
directory. This patch changes the gdbserver logic to also try in this
location.
Originally based on work done by Daniel Nilsson, visible at
http://patchwork.ozlabs.org/patch/155767/.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This commit converts gdb to the package infrastructure, and therefore
moves it from toolchain/gdb to package/gdb.
The target package is now visible in "Package selection for the
target" => "Debugging, profiling and benchmark". The main option,
"gdb", forcefully selects the "gdbserver" sub-option by
default. Another sub-option, "full debugger" allows to install the
complete gdb on the target. When this option is enabled, then
"gdbserver" is no longer forcefully selected. This ensures that at
least gdbserver or the full debugger gets built/installed, so that the
package is not a no-op.
The host debugger is still enabled through a configuration option in
"Toolchain". It is now visible regardless of the toolchain type (it
used to be hidden for External Toolchains). The configuration options
relative to the host debugger are now in package/gdb/Config.in.host,
similar to how we have package/binutils/Config.in.host.
Since gdb is now a proper package, it is no longer allowed to 'select
BR2_PTHREADS_DEBUG' to ensure thread debugging is available when
needed. Instead, it now 'depends on
BR2_TOOLCHAIN_HAS_THREADS_DEBUG'. This option, in turn, is selected by
the different toolchain backends when appropriate. The
'BR2_TOOLCHAIN_HAS_THREADS_DEBUG_IF_NEEDED' option is removed, since
we no longer need to know when it is allowed to 'select
BR2_PTHREADS_DEBUG'. Also, the 'BR2_PTHREADS_DEBUG' option is moved to
appear right below the thread implementation selection (in the case of
the Buildroot toolchain backend).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
git.xilinx.com is no longer available (moved to github), and github
doesn't allow downloading the tarball blobs directly, so use a local
mirror on sources.buildroot.net instead.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add the AArch64 Linaro toolchains 2013.02 and 2013.03, remove 2012.11
and 2012.12.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add the ARM Linaro toolchains 2013.02 and 2013.03, remove 2012.11 and
2012.12.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The existing Microblaze toolchains that we have have the annoying
property of being based on a very old glibc version: 2.3.6. Xilinx
provides newer toolchains with glibc 2.14, generated by Crosstool-NG,
but they are only available as part of a huge Git repository that
contains the gcc, Linux, binutils, glibc sources unpacked (4.4 GB
total), which makes is very unpractical.
I contacted the Xilinx person who did those toolchains, but they
apparently didn't intend to change that anytime soon.
So, we have created a tarball for those toolchains, adding a
README.txt file in the tarball that points back to the original
location that contains the source code for them. Those tarballs are
hosted on sources.buildroot.net.
This commit then adds support for those two new external toolchains,
one for little endian Microblaze, another one for big endian
Microblaze.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The external toolchain wrapper sets sysroot etc. to an absolute path.
By changing this to a relative path, it is possible to move the host
directory to a different location and still have a working build
system.
This only works for a downloaded external toolchain. For a pre-installed
external toolchain, it is possible to move the host directory to a
different location, but not the external toolchain directory (it does work
if the external toolchain directory lies within the host directory). For
an internal or crosstool-ng toolchain, there is no wrapper so updating the
sysroot path should be done in a different way.
See http://lists.busybox.net/pipermail/buildroot/2012-February/050371.html
for information about others things to do to make the host directory
relocatable.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Remove the old 2010RC1 toolchain and add the new 2012R2-RC2 toolchain.
On related good news the new toolchain fixes:
http://autobuild.buildroot.net/results/eac5bd4f4766d98431e72a3c81492a962c85fa98/
since it's got unshare() support now.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Thus, the failing step can be easily extracted by autobuilders,
to ease with post-mortem analysis.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
All supported pre-built external toolchains are built for x86 Linux,
so we add the BR2_HOSTARCH_NEEDS_IA32_LIBS select.
[Peter: microblaze toolchains are 64bit]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The pre-build external toolchains are all built for x86, so they are
only available if the build machine is a x86 or x86-64 machine.
[Peter: microblaze toolchains are 64bit]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Whatever the gdbserver source, as long as it's installed on the target,
assume it requires libthread_db.
Signed-off-by: Richard Braun <rbraun@sceen.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
On ARM, Linaro external toolchains are only visible if the user
selects Cortex-A8 or Cortex-A9. Therefore, we add a comment that tells
the user that the Linaro toolchains are only available under those
conditions.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Basically, the BR2_TOOLCHAIN_EXTERNAL_GLIBC option no longer
unconditionally selects BR2_TOOLCHAIN_HAS_NATIVE_RPC since there are
glibc toolchains that don't have RPC support. All the predefined
toolchain profiles are updated to take into account this change: for
the moment, all glibc toolchains that have pre-defined toolchains have
RPC support, but further patches in the series add pre-defined glibc
toolchains that don't have RPC support. In the case of custom glibc
toolchains, a question is asked to the user so that he can say whether
the external glibc toolchain has RPC support or not. The validity of
this configuration option is checked by the new
check_glibc_rpc_feature function in helpers.mk.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The BR2_INET_RPC has for a long time been a not very descriptive
configuration option name, and with the advent of non-RPC glibc
toolchains and the apparition of libtirpc, we really need to rename it
to something more sensible, BR2_TOOLCHAIN_HAS_NATIVE_RPC.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Yann E. MORIN says:
"Although eglibc can be configured to include/exclude parts of the
features, it seems to not be in wide use, if at all."
Acked-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
All the defconfig files used by the autobuilders that use
pre-installed external toolchains are making the assumption that the
default for a custom external toolchain is "pre-installed". We keep
this default for now, since changing it breaks the autobuilders.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Line-up with changes from commit 3367d5ce77
"external-toolchain: run checks even on extracted toolchains"
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch adds the possibility to download a custom external
toolchain, in addition to the existing support of preinstalled custom
external toolchains.
With the modified configuration, the user is presented with the
following options:
- Toolchain type: Buildroot toolchain | External toolchain | Ct-ng toolchain
In case of External toolchain:
- Toolchain: the CodeSourcery toolchains | Custom toolchain
- Toolchain origin: Toolchain to be downloaded and installed | Pre-installed toolchain
In case of Toolchain to be downloaded, the user is presented with:
- Toolchain URL
In case of Pre-installed toolchain, the users sees:
- Toolchain Path
For CodeSourcery toolchains, the toolchain URL field is not used (the
URLs are directly coded in ext-tool.mk).
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fix the indentation of the external toolchain Config file, where tabs
and spaces are mixed as indentation even within the same block.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
SUPPORT_LIB_DIR would get resolved to the main buildroot directory for
external toolchains without C++ support, as:
- gcc -print-file-name=<nonexisting-file> returns <nonexisting-file>
- readlink -f <nonexisting-file> returns $PWD/<nonexisting-file>
So fix it by ensuring output of gcc -print-file-name actually exists
before using it.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Starting from 2012.03, the Linaro toolchains have separated the GCC
support libraries (libstdc++, libgcc_s) from the sysroot itself. So we
no longer have the case where all libraries are inside the sysroot, as
we had for all the previously supported toolchains.
Therefore, we add some logic to detect if such a separate directory is
used for GCC support libraries, and if it's the case, we make sure
that we take into account this directory when creating our own
sysroot, and when copying libraries to the target filesystem.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The big-endian microblaze external toolchain is missing vital
characteristics being set, such as LARGEFILE support, IPV6 and so on.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Tested-by: Stephan Hoffmann <sho@reLinux.de>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Alvaro G. M <alvaro.gamez@hazent.com>
Tested-by: Stephan Hoffmann <sho@relinux.de>
Downloading Microblaze LE toolchain works on a clean install
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This modifies the definition of DOWNLOAD to receive two arguments:
the first one is the full URL of the file to download, whereas the second
(and optional) is the name the file will have once downloaded.
Same thing with the SOURCE_CHECK_WGET and SCP functions.
All calls to these functions have been changed to the shortest form of
the new API, except for toolchains acquisition. Since there is quite a
number of different toolchains this call to DOWNLOAD is better set to the
generic one.
Signed-off-by: Alvaro G. M <alvaro.gamez@hazent.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Stephan Hoffmann <sho@relinux.de>
Downloading Microblaze LE toolchain works on a clean install
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When an external toolchain is used, it is very likely that it contains
a pre-built version of a gdbserver that has the same version as the
cross-gdb included in the external toolchain. So, we now provide an
option that allows to copy this pre-built gdbserver to the target.
As the location of the gdbserver in the external toolchain is not
standardized, we only support the CodeSourcery and Crosstool-NG
layouts for the moment. Other locations can be added later.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Without the -m64, choosing the x86_64 architecture with a Sourcery external
toolchain will result in a 32-bit rootfs.
Also simplified the help text to reflect this change.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Linaro has just released a new pre-built toolchain, available as a
tarball, which is a pure toolchain (only the C library is
included). This makes this new Linaro 2012.01 toolchain usable in
Buildroot, so let's integrate the support for it.
In addition to simply adding the new external toolchain at the usual
locations, this patch allows need to adapt a few things to support
Linaro toolchains. Most toolchains store their libraries in the "lib/"
or "usr/lib" directories relative to the toolchain. Buildroot
toolchains on the other hand, store the libraries in the
"usr/<target-name>/lib" directory. And the Linaro toolchain has
choosen to use the "lib/<target-name>" directory. Therefore, this
patch adjust:
* The logic to search a particular library when that library needs to
be copied to the target directory
* The logic to deduce the sysroot directory from the libc.a file
location in the toolchain: removing "(usr/?)lib(64?)" is no longer
sufficient, we need to take into account the "lib/<target-name>/"
case.
Since the Linaro toolchain generates code for Cortex-A processors
only, the selection of this toolchain is limited to Cortex-A8 and
Cortex-A9.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When the mechanism that allows Buildroot to download external
toolchains automatically was added, all the sanity checks on the
external toolchains were not performed. This commit re-enables those
checks that we already do on external toolchains that are not
downloaded/extracted by Buildroot. This makes the toolchain checks
more consistent accross various configurations.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Each multilib variant need to be selected using a special combination
of flags, requiring specific choices of the Buildroot options. This
commit documents those configuration choices to make it easier to use
the various multilib variants.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We are going to add one more ARM Sourcery toolchain version, so it's
time to remove the oldest version.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The BR2_TARGET_OPTIMIZATION flags were not used by the external
toolchain wrapper, which broke the multilib selection logic of
multilib external toolchains. It also simplifies the compilation of
external programs since all flags are properly passed automatically by
the toolchain wrapper.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The IA32 Sourcery CodeBench toolchain has a relatively special
structure, with the following multilib variants:
* Intel Pentium 4, 32 bits, the multilib variant is in ./ relative to
the main sysroot, with the libraries in the lib/ directory.
* Intel Xeon Nocona, 64 bits, the multilib variant is in ./ relative
to the main sysroot, with the libraries in the lib64/ directory.
* Intel Atom 32 bits, the multilib variant is in atom/ relative to
the main sysroot, with the libraries in the lib/ directory.
* Intel Core 2 64 bits, the multilib variant is in core2/ relative to
the main sysroot, with the libraries in lib64/ directory.
So the first two variants are in the same sysroot, only the name of
the directory for the libraries is different.
Therefore, we introduce a new ARCH_LIB_DIR variable, which contains
either 'lib' or 'lib64'. This variable is defined according to the
location of the libc.a file for the selected multilib variant, and is
then used when copying the libraries to the target and to the staging
directory.
In addition to this, we no longer use the -print-multi-directory to
get the ARCH_SUBDIR, since in the case of the 64 bits variants of this
toolchain, it returns just '64' and not a real path. Instead, we
simply compute the difference between the arch-specific sysroot and
the main sysroot.
We also take that opportunity to expand the documentation on the
meaning of the different variables.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Newer versions of GDB need pthread debugging support if threads are
enabled, which is always the case for glibc but is a configure option
for uClibc.
We have solved this for internal toolchains by selecting the
BR2_PTHREAD_DEBUG option from the GDB selection if needed, but as this
option isn't available when ctng/external toolchains are used, mconf
prints ugly warnings and the build may fail if an external uClibc
toolchain without pthread debugging support is used.
Fix it by introducing 2 more hidden config options:
- BR2_TOOLCHAIN_HAS_THREADS_DEBUG
- BR2_TOOLCHAIN_HAS_THREADS_DEBUG_IF_NEEDED
The first tells us if the toolchain HAS pthreads debugging support,
and is checked by check_uclibc_feature in helper.mk for external uClibc
based toolchains.
The second tells us if the toolchain is ABLE TO provide pthreads debugging
support if threads are enabled, either because it's an internal toolchain
where we can force enable it or an external glibc/eglibc toolchain or
uClibc with the option enabled.
Crosstool-ng forcibly enables this support, so those will always work.
The preconfigured uClibc-based toolchains we have also all enable it.
Finally, show a comment if this isn't the case so the (external toolchain)
user knows why. This is placed outside the choice option, as menuconfig
has a bug where it doesn't show choice selections which only contain
comments.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Permit to define the mcpu of the external toolchain wrapper, based on
BR2_GCC_TARGET_CPU.
Signed-off-by: Stany MARCEL <stanypub@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When the external tools chain is installed in a path that match one of
the first case test, all symlink are created to the external
wrapper. The proposed solution is to test only the base name not the
full path.
Signed-off-by: Stany MARCEL <stanypub@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Some CodeSourcery toolchains contain a huge number of locales that are
not useful, even though they account for 70-80% of the total toolchain
size. By skipping the extraction of those useless locales, we make the
toolchain extraction process slightly faster, and also make the output
directory size a lot smaller (host/opt/ is 213 MB instead of 1.5 GB
with a 2010.09 ARM CodeSourcery toolchain).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Now that CodeSourcery has been bought by Mentor Graphics, the
toolchains are named "Sourcery CodeBench". We rename the config short
description and adjust the help text, but we keep the option name in
order not to break existing configurations.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Custom toolchains may provide extra libraries that need to be copied to the
target. This patch adds a configuration option for this.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The website for downloading the toolchain has changed from
http://www.codesourcery.com to http://sourcery.mentor.com
Signed-off-by: Subramaniam C.A <subramaniam.ca@ti.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The prefix is not set when selecting this toolchain, resulting in a
build failure.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The CodeSourcery toolchain for SH2-A platforms provide largefile
support, inet RPC, wide char and threads, so adjust the configuration
accordingly.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Remove the BR option and enable the configuration setting in the
uClibc defconfigs.
The BR2_PROGRAM_INVOCATION option only adds very little overhead to
uClibc, and we have a number of packages needing it, so simply always
enable it - Simplifying the kconfig logic and the number of choices
users have to make.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The internal toolchain defaults to thread support enabled (and
most external toolchains have thread support as well), so enable
BR2_TOOLCHAIN_EXTERNAL_HAS_THREADS by default.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
sh2eb and sh2a_nofpueb gnuconfig targets are no longer supported
in Buildroot. This patch replaces these Buildroot targets with sh2
and sh2a respectively, and adds sh4a targets as these are widely
used.
To build for devices without an fpu, the relevant toolchain flags
will have to be specified.
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Added the CodeSourcery uCLinux/uClibc toolchain for the SH2A big
endian devices.
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Even though MAXARGS 1000 seems large, it wasn't enough for at least
QtWebKit package. This new version does not have any predefined limits.
Closes#3907
Many thanks to Thomas for tracing the source of the build error.
[Peter: Return rather than abort()]
Signed-off-by: Daniel Nyström <daniel.nystrom@timeterminal.se>
Reported-by: Thomas Björk <thomas.bjork@home.se>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Unfortunately, the official Blackfin toolchains are built without the
shadow password support, so our default Busybox configuration fails to
build.
Therefore, we introduce a new hidden knob
BR2_TOOLCHAIN_HAS_SHADOW_PASSWORDS, which is set to yes for Buildroot
internal toolchain, for toolchains generated by the Crosstool-NG
backend, for Glibc external toolchains and for Uclibc custom external
toolchains. It is left unset by the Blackfin toolchain profile.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
* fixed: external toolchain CODESOURCERY ARM2009Q1 downloaded version ARM2009Q3
* add CODESOURCERY ARM2009Q1 for ti dvsdk 3.10.
Signed-off-by: Klaus Schwarzkopf <schwarzkopf@sensortherm.de>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The recent commit adding the external toolchain wrapper has broken the
support for external toolchain. The check_arm_eabi, check_cplusplus
and check_cross_compiler_exists functions were using TARGET_CC, which
points to the toolchain wrapper, but at the moment those functions are
called, the wrapper hasn't been generated yet.
We fix this by passing to these functions the path to the C or C++
compiler they should use for their tests.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The CodeSourcery toolchain listed is only for SH4A devices.
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Now that we use a wrapper for external toolchains (and internal ones
default to the correct setting), we no longer need to explicitly pass
sysroot/march/mtune/mabi/floating point mode in TARGET_CFLAGS.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add a simple toolchain wrapper for external toolchains, which forces the
correct sysroot/march/mtune/floating point options needed to use it
with buildroot.
With this in place the external toolchain behaves similar to the internal
ones, and the special handling can be removed. This also means that the
toolchain is usable outside buildroot without having to pass any special
compiler flags.
Also adjust the downloadable external toolchain support to install under
HOST_DIR so it can be used after the temporary build files are removed.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In e6633fd2e3 I did crap, and added a
quietization inside a shell command, which was already quietized. This
was stupid, and is fixed by this patch.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In the support of custom external toolchains, we forgot to touch the
$(STAMP_DIR)/ext-toolchain-checked stamp file, which means that the
toolchain was re-checked and re-installed at everyt build.
At the same time, quietize a bit other stamp files touch.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The selection of linuxthreads, linuxthreads old or NPTL doesn't make a
lot of sense for external toolchains. So, instead, we :
* Introduce an hidden BR2_TOOLCHAIN_HAS_THREADS option, which must be
selected by toolchain specific options when thread support is
available. Package needing to test thread support should use this
option.
* Move the none/linuxthreads/linuxthreads old/NPTL selection to
Buildroot internal toolchain configuration.
* Add an option in external toolchain to tell if thread support is
available or not in the external toolchain. We assume that glibc
without threads is not possible, as Ulrich Drepper said in
http://sourceware.org/ml/libc-alpha/2005-08/msg00091.html
ffmpeg, dmalloc and openvpn are fixed to use the new
BR2_TOOLCHAIN_HAS_THREADS option. For openvpn, --enable-threads=posix
is no longer used, as the configure script doesn't even understand
this option.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Instead of having BR2_GCC_CROSS_CXX and BR2_INSTALL_LIBSTDCPP, with
BR2_GCC_CROSS_CXX not being visible (and therefore being useless),
let's just keep BR2_INSTALL_LIBSTDCPP to enable C++ in the toolchain
and install C++ libraries on the target.
We also take that opportunity to make BR2_INSTALL_LIBSTDCPP an hidden
option, which is selected by an option in Buildroot toolchain support
or an option in External toolchain support, just as we did for other
toolchain features.
Some work definitely remains to be done :
- The name BR2_INSTALL_LIBSTDCPP is ugly, but we keep it for the
moment in order to avoid changing all packages.
- We should clarify the other language-related options (Fortran,
Java, Objective-C, etc.).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
We already handle the stripping of libraries in $(TARGET_DIR) at the
global level, so there's no need to have toolchain-specific option and
code for this.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Instead of letting the user define all the details of his external
toolchain, we define a set of profiles for well-known external
toolchains (CodeSourcery ones only at the moment, can easily be
extended with other toolchains).
Once a profile has been choosen, the user is offered the choice of
either letting Buildroot download and install the external toolchain,
or (as before) to tell Buildroot where the toolchain is installed on
the system.
We of course provide a "custom profile", through which the user can
configure Buildroot to use a custom external toolchain for which no
profile is available.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Turn BR2_LARGEFILE, BR2_INET_IPV6, BR2_INET_RPC, BR2_USE_WCHAR,
BR2_ENABLE_LOCALE and BR2_PROGRAM_INVOCATION into hidden options.
Then, for Buildroot toolchains, external toolchains and Crosstool-NG
toolchains, provide visible options that selects the hidden options.
This allows :
* To show a different label and help text in the case of Buildroot
toolchain (do you want to enable feature X ?) and in the case of
external toolchain (is feature X available in your toolchain ?)
* To not show any option when a glibc external toolchain is selected
(since glibc is assumed to support all of largefile, IPv6, RPC,
WCHAR, locale and program invocation) and have them all selected in
that case.
There is some amount of duplication between Buildroot toolchain config
options and Crosstool-NG toolchain config options, because kconfig
doesn't allow to source the same Config.in file twice (even if under
mutually exclusive conditions). This duplication is more readable that
the hack that consists in splitting files in multiple pieces.
However, this commit changes the name of the options visible in the
configuration interface, so existing .config files will have to be
updated accordingly.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
* ccache is now a normal package (both for the host and the target).
* ccache option is now part of the "Build options" menu. It will
automatically build ccache for the host before building anything,
and will use it to cache builds for both host compilations and
target compilations.
* bump ccache to 3.1.3
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Rename the external toolchain directory.
When new backends are here, it will be easier to sort them out
if they are all prefixed the same way.
Signed-off-by: Yann E. MORIN <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
