Will avoid the following warning:
WARNING: Image format was not specified for
'/home/thomas/projets/outputs/TestExt3/images/rootfs.ext3' and
probing guessed raw. Automatically detecting the format is
dangerous for raw images, write operations on block 0 will be
restricted. Specify the 'raw' format explicitly to remove the
restrictions.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
All the tests that are using if=sd as a Qemu options are changed to
use infra.img_round_power2() instead of simply extending the size of
the image to the next MB boundary, which is not longer sufficient with
Qemu >= 5.1.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr: drop now-useless imports]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since Qemu 5.1, SD card images must have a size that are a power of
two. While some filesystem (such as ext2/3/4) allow to specify the
expected size of the filesystem, others such as SquashFS do not have
this capability.
We were already extending the size of such images to the next 1 MB
boundary using "truncate -s %1M", but that is no longer sufficient. So
instead, we introduce a helper function that extends the size of an
image to the next power of two.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr:
- use f.trunctate() rather than subprocess.call([truncate,...])
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since Qemu 5.1, the SD card size must be a power of two, so the
default size for ext2/3/4 filesystem images of 60 MB is not
suitable. Since 16 MB is used for the Ext4 test, let's use the same
value for the other tests as well (ext2, ext2r1, ext3). Without this
change, the ext2, ext2r1 and ext3 simply fail to run under Qemu >=
5.1.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The BRTest() class implements an assertRunOk() method that does the
very common work of running a command inside the emulator, and
checking that it is successful.
This commit changes all locations where this .assertRunOk() method can
be used, instead of open-coding the same logic.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Bump U-Boot version in TestATFAllwinner. Updating U-Boot version to
2021.04 requires the following two changes.
First, after switching to binman, u-boot.itb is no more generated for
64-bit sunxi boards. Combined u-boot-sunxi-with-spl.bin image should
be used instead. This image contains SPL, U-Boot, and FIT image,
where FIT image contains other binaries such as BL31 and SCP.
Second, new U-Boot enables support for System Control Processor (SCP)
firmware. SCP firmware is included by default into FIT image in the
combined u-boot-sunxi-with-spl.bin binary. When SCP is not available
or not needed, it should be explicitly disabled by pointing to an
empty file. Support for Allwinner SCP firmware is not yet available
neither in Buildroot nor in mainline kernel. So disable it for now
using custom U-Boot build options.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Switch to mainline TF-A that provides basic support for H5 and A64.
Note that Allwinner platform layer in TF-A does not provide support
for GCC stack protection, so make sure to disable this TF-A feature.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
As this version brings support for kernel up to 5.12, we update the
test cases to use the 5.12 kernel.
Signed-off-by: José Luis Salvador Rufo <salvador.joseluis@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr: check the two files are identical]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This patch implements a simple test in which a dummy file system image
is created, then `bmaptool create` and `bmaptool copy` are used to copy
it to another file.
Signed-off-by: Nicolas Carrier <nicolas.carrier@orolia.com>
[Thomas: several reworks, add myself to DEVELOPERS]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr: check the two files are identical]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The pre-built vexpress kernel used by the testing infrastructure is a
4.0.0 kernel, which is getting old to be used with reasonably recent
toolchains.
This commit updates the pre-built kernels for both the versatile and
vexpress machines to 5.10.7 (they have already been put online).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This module is only partially compatible with lzlib (which is no longer
maintained).
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
[yann.morin.1998@free.fr: amend commit log about limited compatibility]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since [1], PIC/PIE is enabled by default but the TestRelroPartial
test expect implicitely PIC/PIE being disabled.
Disable PIC/PIE from the config fragment provided by
TestRelroPartial.
[1] 810ba387be
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/1255661757
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
From [1]
"Xorg does not implement real dynamic linking and requires that its
modules get loaded in the right order."
From /var/log/Xorg.0.0.log:
(II) LoadModule: "modesetting"
(II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
(EE) Failed to load /usr/lib/xorg/modules/drivers/modesetting_drv.so: /usr/lib/xorg/modules/drivers/modesetting_drv.so: undefined symbol: shadowRemove
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/1255661899
[1] https://forums.gentoo.org/viewtopic-p-8245578.html#8245578
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since the mesa3d bump to version 21.0.3 [1], the
BR2_PACKAGE_MESA3D_DRI_DRIVER_SWRAST option is not supported anymore
since the mesa DRI swrast driver has been removed upstream
So, switch to Gallium swrast.
[1]15a2f9b819806d38a7d8172a20f80130b1d60e63
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Boot a QEMU sbsa-ref machine with ATF, EDK2, GRUB2 and a minimal
kernel. This is a simple but effective test of a compliant setup.
Signed-off-by: Dick Olsson <hi@senzilla.io>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Extend docker_compose_test() to expose /bin on the host to the container
through a volume mount and verify that /bin/busybox can be downloaded and
contains the right data.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Extend docker_test() to expose a random (8888) port to verify that doesn't
fail, and extend the docker-compose test to run the busybox httpd in the
background, expose that as port 80 and verify that /etc/resolv.conf could be
fetched by wget.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The python2 support has been removed since the python-colorzero bump version to 2.0.
[1] 73bf3292e1
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The python2 support has been removed since the python-colorzero bump version to 2.0.
Remove the gpiozero test with python2
[1] 73bf3292e1
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Create a new user 'sudotest' to validate that sudo really works (i.e.
properly has setuid).
Creating the user and adding it to sudoers is done at runtime, otherwise
we'd need to add extra files to the config which complicates things a
little bit.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Kernel 4.16.7 is old enough to produce the "multiple definition of `yylloc'"
error which is fixed in newer versions.
Bump the test kernel version from 4.16.7 to 5.10.34 to prevent this error wwhen
building the test image.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Test that the TAICLOCK and TCP servers are working.
Signed-off-by: Dick Olsson <hi@senzilla.io>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Arnout: indent config lines more]
Test that s6-rc service database compilation is working.
Signed-off-by: Dick Olsson <hi@senzilla.io>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Arnout: indent config lines more]
Test that a few basis utilities are working.
Signed-off-by: Dick Olsson <hi@senzilla.io>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Arnout: indent config lines more]
Test that directory scanning and supervision is working.
Signed-off-by: Dick Olsson <hi@senzilla.io>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Arnout: properly indent, and use textwrap to dedent again.]
Test that the interpreter can run a basic command.
Signed-off-by: Dick Olsson <hi@senzilla.io>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Arnout: indent config lines more]
OpenZFS is an advanced file system and volume manager which was originally
developed for Solaris and is now maintained by the OpenZFS community. This
repository contains the code for running OpenZFS on Linux and FreeBSD.
http://zfsonlinux.org/
Signed-off-by: José Luis Salvador Rufo <salvador.joseluis@gmail.com>
[me:
- fix test case on how to use a pre-built toolchain
- reorder the test case config
- add test case with glibc
- drop superflous test timeout override
- only select libtirpc when C library lacks native RPC
- drop unused ZFS_MODULES variable
- drop ZFS_CPE_ID_PREFIX and ZFS_AUTORECONF_OPTS which are defaults
- drop NLS options, already set in a generic manner
- drop incomplete/improper sysvinit support
- some cosmetics
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
FOO_CPE_ID_VALID really ought to be an internal implementaion detail.
Packages that really want to trigger their CPE defintitions really
should set one of the actual variables to a meaningful value.
There are two CPE-related variables that we could chose to set to
replace FOO_CPE_ID_VALID: FOO_CPE_ID_VENDOR and FOO_CPE_ID_PRODUCT.
Between those two, _VENDOR more often diverges from the default than
_PRODUCT does, so that's what we use.
---8<------8<------8<------8<------8<---
#!/bin/bash
# Replace FOO_CPE_ID_VALID = YES with FOO_CPE_ID_VENDOR = foo_project
for i in $(git grep -l -E '[^)]_CPE_ID_VALID = YES' package support); do
pkg="$(basename "${i%/*}")"
sed -r -i -e "s/_CPE_ID_VALID = YES/_CPE_ID_VENDOR = ${pkg}_project/" "${i}"
done
---8<------8<------8<------8<------8<---
Reported-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Matthew Weber <matthew.weber@rockwellcollins.com>
Cc: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Peter: update cpe-test comment to reflect pkg3 change]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix U-Boot config snippet in TestATFAllwinner. Bump U-Boot
version to fix DTC build on hosts with gcc 10 and add
pylibfdt dependency.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
There were only two users of Marvell ATF: SolidRun MacchiatoBin board
and ClearFrog GT 8k board. After mv-ddr-marvell package update both
boards switched to upstream ATF. Remove tests for now unused
Marvell ATF.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Switch to using the tarball helper, that can generate reproducible
archives whatever the tar version >= 1.27.
However, those archives are not identical to the previous ones generated
in the (now-broken) gnu format.
To avoid any clashing between old and new archives, and new and old
Buildroot versions, we need to name the new generated archives
differently from the existing ones.
So, we bump the git-specific format-version to -br1.
The %ci date has been supported by git back to 1.6.0, released August
2008); it is not strictly ISO8601, but is still accepted as a PAX date
header. The strict ISO8601 placeholder, %cI, was only introduced with
2.2.0, release in November 2014, so too recent to be widely available.
As the format and the names of the archives changes, we need to update
all the hash files with the new names and hashes.
Of all the bootloaders that have a git download method, vexpress-firmware
is the only one to have a hash. Others have no hash files, or they have
explicitly set BR_NO_CHECK_HASH_FOR.
For the packages, linux-headers is the special snowflake, as the git
download is only for custom git tree, so it is excluded from the hash
verification with BR_NO_CHECK_HASH_FOR.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Vincent Fazio <vfazio@xes-inc.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Vincent Fazio <vfazio@xes-inc.com>
---8<------8<------8<------8<---
#!/bin/sh
# Find and download all packages using git as backend.
# Manually fix hashes for affected packages.
# Packages that only have a host variant
HOST_ONLY='imx-mkimage|mxsldr|netsurf-buildsystem|opkg-utils|prelink-cross|qoriq-rcw|vboot-utils'
# Packages that have a non-git main _SOURCE, and/or which
# have BR_NO_CHECK_HASH_FOR for the git _SOURCE
NOT_GIT='aufs|aufs-util|xenomai|linux-headers'
export BR2_DL_DIR=$(pwd)/temp-dl-dir
make defconfig
make $( git grep -l -E 'SITE_METHOD[[:space:]]*:?=[[:space:]]*git\>|_SITE[[:space:]]*:?=[[:space:]]*git:' \
boot/vexpress-firmware/ package/ \
|sed -r -e 's,.*/([^/]+)\.mk,\1,' \
|sed -r -e '/^('"${NOT_GIT}"')$/d;' \
-e 's/^('"${HOST_ONLY}"')/host-\1/;' \
-e 's/$/-legal-info/;'
)
---8<------8<------8<------8<---
This commit adds a number of test cases to verify that the CPE_ID_*
variables are properly handled by the generic package infrastructure
and that the "make show-info" JSON output matches what we expect.
A total of 5 different example packages are used to exercise different
scenarios of CPE_ID_* variables usage.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When running the TestInitSystemSystemdRwIfupdown test, the rootfs must
be in read-write mode. The commit log [1] introducing systemd tests say
so:
"basic systemd, read-write, network w/ ifupdown"
With systemd 246.5, the service systemd-update-done return an error code
when it can't write on the filesystem (/etc)
[1] 117835d5fc
[2] 8019995e9a
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/830981813
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following flake8 warnings:
support/testing/tests/core/test_selinux.py:21:1: E302 expected 2 blank lines, found 1
support/testing/tests/core/test_selinux.py:38:1: E302 expected 2 blank lines, found 1
support/testing/tests/core/test_selinux.py:51:1: E302 expected 2 blank lines, found 1
support/testing/tests/core/test_selinux.py:62:1: E302 expected 2 blank lines, found 1
support/testing/tests/core/test_selinux.py:65:14: E127 continuation line over-indented for visual indent
support/testing/tests/init/test_systemd_selinux.py:53:1: E302 expected 2 blank lines, found 1
support/testing/tests/init/test_systemd_selinux.py:64:1: E302 expected 2 blank lines, found 1
Interestingly, the "continuation line over-indented for visual indent"
shows up only once, while the same pattern is there at multiple places
in the file. We fix all places with that over-indentation pattern.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add tests to ensure the packages SELinux functionalities (being able to
select an extra SELinux module in the refpolicy, and being able to
provide a custom SELinux module) are working as expected.
We use a BR2_EXTERNAL folder, provided in the tests, to use a custom
SELinux enabled package.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a test for BR2_PACKAGE_REFPOLICY_CUSTOM_GIT (which allows to select
a custom location for the SELinux refpolicy). The test uses the official
refpolicy as a test (we only want to test the functionality is working,
not that another refpolicy is correctly building; that is an user
problematic).
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a test for the BR2_REFPOLICY_EXTRA_MODULES_DIRS functionality (which
allows to provide custom SELinux modules).
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds a test for the BR2_REFPOLICY_EXTRA_MODULES
functionality (which allows to select extra modules within the SELinux
refpolicy using Kconfig).
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a test called 'SELinuxSystemdSquashfs' which will perform the same
tests as the Ext4 version, but using a Squashfs filesystem. Thanks to
this, we'll have a test on a real only filesystem.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This adds a test called 'SELinuxSystemdExt4'. This test will build an
SELinux enabled image with systemd, boot it, and perform a few runtime
tests to check SELinux related capabilities.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When it was applied, commit 243d500f8d (support/testing: add openssh
runtime test) was amended to not provide a NIC to the emulated machine,
as the test did not require access to the outer world: it only uses the
lo interface. Also, there was a discrepancy between the NIC name in the
Buildroot configuration, and the drivers available in our default kernel
image, making the boot hang for a while whaiting for a NIC that would
never come.
However, that tweak was tested locally with a qmeu version more recent
than the one available in our buidroot/base Docker image. As a
consequence, that test fails to run in gitlab-ci.
Revert to using the old way of specifying no network: it works on
gitlab-ci, and qemu versions in standard distros still support it.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This commit adds the new test cases generated automatically by the
bl-toolchains-gen script, to test the integration of the Bootlin
toolchains.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Modeled after similar python packages.
However, this one is picky, and throws an exception when it
detects that it is not running on a Raspberry Pi. So we just
catch that exception and check this is what we expect.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Christian Stewart <christian@paral.in>
Cc: Michael Fischer <mf@go-sys.de>
Cc: Asaf Kahlon <asafka7@gmail.com>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Cc: Ian Haylock <haylocki@yahoo.co.uk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This new runtime test is based on test_dropbear.py. The only required change
is to use "-oStrictHostKeyChecking=no" instead of "-y" to accept the new key.
Since the base test infra only provide a uClibc-ng toolchain, add a second
test using a glibc based internal toolchain.
For example, this allow to trigger the openssh 8.1p bug with glibc 2.31 [1].
[1] https://bugs.archlinux.org/task/65386
Signed-off-by: Romain Naour <romain.naour@smile.fr>
yann.morin.1998@free.fr:
- deduplicate the whole test
- don't provide any NIC, we only need and use lo
- simplify post-build script (append with cat, don't munge with sed)
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The TestExternalToolchain() base class implement a test checking if
the ELF interpreter that is advertised by Busybox really exists in the
rootfs. Of course, this only makes sense with ELF toolchains. Until
now, only ELF toolchains were tested, but we are going to use
TestExternalToolchain() with non-ELF toolchains as well, so let's make
this conditional.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr: strip() lines during readlines()]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since the bump of ATF to 2.2 for the ATF Vexpress test case in commit
fc3d6a3ed0
("support/testing/tests/boot/test_atf: update U-Boot/ATF use in
TestATFVexpress"), DTC is now needed otherwise the build fails with:
make[2]: dtc: Command not found
Makefile:873: recipe for target 'build/juno/release/fdts/juno_tb_fw_config.dtb' failed
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/674934470
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since commit 0390777bfa (package/docker-engine: needs some kernel
options), docker-engine now automatically ensures the needed kernel options
are enabled, so drop the explicit options from the kernel config.
23:19:27 TestDockerCompose Starting
23:19:28 TestDockerCompose Building
00:14:41 TestDockerCompose Building done
00:15:30 TestDockerCompose Cleaning up
.
----------------------------------------------------------------------
Ran 1 test in 3362.784s
OK
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since commit 4f8229653 (package/docker-engine: needs more runtime
dependencies), docker-engine now automatically pulls in cgroupfs-mount, so
drop the explicit handling of it in TestDockerCompose.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As no package depends on the standalone cargo package, it can be
dropped.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Patrick Havelange <patrick.havelange@essensium.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: David Pierret <david.pierret@smile.fr>
Tested-by: David Pierret <david.pierret@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Buildroot currently installs openjdk-bin to $(HOST_DIR)/ instead of the more
traditional (for java installations) $(HOST_DIR)/usr/lib/jvm.
As described in https://bugs.busybox.net/show_bug.cgi?id=13001
"Openjdk-bin provides it's own libfreetype.so and places it into
$(HOST_DIR)/lib/. This library causes build failures with the
host-xapp_mkfontscale package due to the overwritten libfreetype.so.
mkfontscale.o: In function `doDirectory':
mkfontscale.c:(.text+0x1a80): undefined reference to `FT_Get_BDF_Property'
collect2: error: ld returned 1 exit status
Reproducing the error is done by repeating the following steps.
make host-freetype
make host-openjdk-bin
make host-xapp_mkfontscale"
There are two options for fixing this problem:
1) add host-freetype and host-lksctp-tools as dependencies to host-openjdk-bin
and then remove the provided libfreetype.so and libsctp.so libraries
in a post_extract_hook.
2) change the installation directory from $(HOST_DIR)/ to
$(HOST_DIR)/usr/lib/jvm just like the target OpenJDK package and
copy the entire source directories contents to the above location.
The second option provides the following advantages:
- the directory structure is consistent with how we handle the target OpenJDK.
- the HOST_OPENJDK_BIN_INSTALL_CMDS step is simplified.
- packages such as Maven require directories of which we are currently not
copying. These missing directories cause programs such as Maven to crash
when running with an error such as
"Can't read cryptographic policy directory: unlimited."
- does not miss any other libraries that solution 1 would not cope with
(e.g. libzip.so from host-libzip, or libnet.so from not-yet existing
host-libnet, or libsctp.so from not-yet existing host-lksctp-tools)
Because the second option is both simple, easier to implement, is low-impact,
and fixes the problems described above wholly, it is the best to implement.
To implement the above changes, we must also modify the following files in the
same patch to match the host's new directory paths:
- openjdk.mk
- openjdk-jni-test.mk
- openjdk-hello-world.mk
To avoid having to change all those packages in the future, expose two
new variables, HOST_OPENJDK_BIN_ROOT_DIR which contains the path where
the openjdk-bin was installed in, and JAVAC, which contains the path to
the javac compiler (modeled after the way the autoconf et al. variables
are set and exposed).
Tested with:
./support/testing/run-tests -o out -d dl tests.package.test_openjdk.TestOpenJdk
Fixes: https://bugs.busybox.net/show_bug.cgi?id=13001
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
[yann.morin.1998@free.fr:
- introduce HOST_OPENJDK_BIN_ROOT_DIR and JAVAC
- expand and tweak the commit log
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The commit 0f0649140f introduced a change
in the module name: utf8 -> lua-utf8.
The packages-file-list.txt show the change in the files intalled on the rootfs:
[lua-utf8 0.1.2-2 latest version]
lua-utf8,./usr/lib/luarocks/rocks-5.1/luautf8/0.1.2-2/doc/LICENSE
lua-utf8,./usr/lib/luarocks/rocks-5.1/luautf8/0.1.2-2/doc/README.md
lua-utf8,./usr/lib/luarocks/rocks-5.1/luautf8/0.1.2-2/luautf8-0.1.2-2.rockspec
lua-utf8,./usr/lib/luarocks/rocks-5.1/luautf8/0.1.2-2/rock_manifest
lua-utf8,./usr/lib/lua/5.1/lua-utf8.so
[lua-utf8 1.2-0 previous version]
lua-utf8,./usr/lib/luarocks/rocks-5.1/utf8/1.2-0/doc/README.md
lua-utf8,./usr/lib/luarocks/rocks-5.1/utf8/1.2-0/utf8-1.2-0.rockspec
lua-utf8,./usr/lib/luarocks/rocks-5.1/utf8/1.2-0/rock_manifest
lua-utf8,./usr/lib/lua/5.1/utf8.so
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/526036036
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
As of upstream commit 735eb608637e7bbab4082a541ac802cc919fec22,
available since version v20.1.1, support for Python 2.x has been
dropped, and Python >= 3.5 is required. So we make python-txaio depend
on python3, and remove the python2 test of python-txaio.
We also remove the python-six dependency which is no longer used by
txaio, since upstream commit 62b0e7eaa22769687df1de8f57374cb0a42bdc4d.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Upstream commit
c0223223f8,
which has been part of the releases since v20.1.2 has dropped support
for Python 2.x. So python-autobahn is now only available for Python
3.x.
We therefore remove the Python 2.x autobahn tests, and while at it,
drop the python-six dependency, which is no longer needed since
upstream commit
79bd2ba41b,
part of the releases since v20.1.3.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently, the build continue even if some symbols disapear from
the generated dot config file (.config).
This patch add a new check in order to stop the test if one
of the provided symbol is missing. This must be treated as error.
For example, if a symbol disapear due to new dependency constraints.
Inspired by is_toolchain_usable() function from genrandconfig:
https://git.busybox.net/buildroot/tree/utils/genrandconfig?h=2020.02#n164
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
TestPythonPackageBase.config provide already the basic uClibc toolchain.
So by adding the symbols for the linaro toolchain some warning are printed
at while loading the configuration:
.config:16:warning: override: reassigning to symbol BR2_TOOLCHAIN_EXTERNAL
.config:16:warning: override: BR2_TOOLCHAIN_EXTERNAL changes choice state
.config:17:warning: override: reassigning to symbol BR2_TARGET_ROOTFS_CPIO
.config:21:warning: override: BR2_TOOLCHAIN_EXTERNAL_LINARO_ARM changes choice state
So, some symbol disapear from the generated dot config (.config) leading
to an error due to a new check in the testsuite infra.
Since this test should use the Linaro toolchain, remove
TestPythonPackageBase.config add BR2_arm=y and disable the rootfs tar option.
While at it, re-order the options so that they appear in the same
order as they appear in a defconfig.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Adam Duskett <Aduskett@gmail.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Until now, the lxc test was using the ARM CodeSourcery 2014.05 armv5 toolchain.
But the recent systemd version bump to 245 added a toolchain dependency
on systemd package due to build issues with gcc < 5.0.
Before [1] the lxc test was failing to build with the ARM CodeSourcery 2014.05
toolchain. After [1], the test is faling at runtime since the
"BR2_INIT_SYSTEMD=y" symbol disapear from the dot config (.config) due to
the new toolchain dependency.
Fix this by using the same toolchain as for the systemd tests [2]
[1] 2196ee25ff
[2] b3d979c0d1
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The BR2_GENERATE_LOCALE can only be used by uClibc based toolchains with the
internal toolchain backend [1].
The test_tmux is using a external uClibc toolchain, so the
"BR2_GENERATE_LOCALE="en_US.UTF-8"" line disapear from
the generated dot config (.config) leading to an error due to
a new check in the testsuite infra.
[1] https://git.buildroot.net/buildroot/commit/?id=bd0ffe2206fbd32baf7f4a1dc5fde81cfad70462
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The BR2_TOOLCHAIN_EXTERNAL_LOCALE is only defined for uClibc based
custom external toolchains.
The test_glxinfo is using a glibc toolchain, so the
"# BR2_TOOLCHAIN_EXTERNAL_LOCALE is not set" line disapear from
the generated dot config (.config) leading to an error due to
a new check in the testsuite infra.
There is the same problem with:
BR2_TOOLCHAIN_EXTERNAL_HAS_THREADS_DEBUG=y
BR2_TOOLCHAIN_EXTERNAL_HAS_THREADS=y
BR2_TOOLCHAIN_EXTERNAL_HAS_THREADS_NPTL=y
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The BR2_TOOLCHAIN_EXTERNAL_LOCALE is only defined for uClibc based
custom external toolchains.
The test_syslinux is using a glibc toolchain, so the
"# BR2_TOOLCHAIN_EXTERNAL_LOCALE is not set" line disapear from
the generated dot config (.config) leading to an error due to
a new check in the testsuite infra.
There is the same problem with:
BR2_TOOLCHAIN_EXTERNAL_HAS_THREADS_DEBUG=y
BR2_TOOLCHAIN_EXTERNAL_HAS_THREADS=y
BR2_TOOLCHAIN_EXTERNAL_HAS_THREADS_NPTL=y
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit adds four new tests for the syslinux bootloader:
- Building on x86, for legacy BIOS
- Building on x86, for EFI BIOS
- Building on x86-64, for legacy BIOS
- Building on x86-64, for EFI BIOS
Runtime testing in Qemu would certainly be possible, but is left as a
future addition to these tests.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update the toolchain being used by the testsuite infra.
The new toolchain 2018.11-1 is based on gcc 8.2, uClibc-ng 1.0.30,
linux-headers 4.14 and binutils 2.31.1.
Enable BR2_TOOLCHAIN_HAS_THREADS_DEBUG that is now required.
The old toolchain 2017.05 is based on gcc 4.9, uClibc-ng 1.0.25,
linux-headers 3.10 and binutils 2.27.
Tested with gitlab
https://gitlab.com/kubu93/buildroot/pipelines/132376578
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The older version of flake8 on the autobuilders does not support typehints.
As such, flake8 throws the following error when scanning sample_gst1_python:
E999 SyntaxError: invalid syntax
Remove the typehinting from on_message to fix this issue.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The config is missing the following packages:
- BR2_PACKAGE_GST1_PLUGINS_BASE
This is needed for the videotestsrc plugin which provides
videotestsrc.
- BR2_PACKAGE_GST1_PLUGINS_BAD
This is needed for the debugutils plugin which provides
fakevideosink.
- BR2_PACKAGE_GST1_PLUGINS_BASE_PLUGIN_VIDEOTESTSRC
videotestsrcplugin used by the example pipeline.
- BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_DEBUGUTILS
fakevideosink plugin used by the example pipeline.
The sample was also amended to fix:
- no call to main.
- using autovideosink instead of fakevideosink. Using Fakevideoskink
is preferred because its primary purpose is for debugging and sample
pipelines. Autovideosink does not work because there is no video
output device.
- No function on_message. Without this function, the script fails
because of the missing function.
- The script sets the pipeline to Gst.State.EOS instead of
Gst.State.NULL which results in a failed pipeline state. When the
state is set to NULL, gstreamer automatically calls EOS. Manually
setting the pipeline state to EOS results in the following error:
Trying to dispose element sink, but it is in PLAYING instead of
the NULL state. You need to explicitly set elements to the NULL
state before dropping the final reference, to allow them to
clean up. A refcounting bug may also cause this problem in the
application or some element.
In addition, the default timeout is set too low and would result in a
test failure, this has been changed to 200 seconds.
These issues are now properly fixed, and the sample script passes.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
[yann.morin.1998@free.fr:
- meld the two patches together
- add the print() in the on_demand callback
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This reverts commit 25033cfb86.
This perl package is deprecated and gives following recommendations while
building:
*** THIS IS NOT AN ERROR, JUST A MESSAGE FOR YOUR INFORMATION ***
Do you really need Crypt::SSLeay?
Starting with version 6.02 of LWP, https support was unbundled into
LWP::Protocol::https. This module specifies as one of its prerequisites
IO::Socket::SSL which is automatically used by LWP::UserAgent unless
this preference is overridden separately. IO::Socket::SSL is a more
complete implementation, and, crucially, it allows hostname
verification. Crypt::SSLeay does not support this. At this point,
Crypt::SSLeay is maintained to support existing software that already
depends on it.
However, it is possible that your software does not really depend on
Crypt::SSLeay, only on the ability of LWP::UserAgent class to
communicate with sites over SSL/TLS.
If are using version LWP 6.02 or later, and therefore have installed
LWP::Protocol::https and its dependencies, and do not explicitly use
Net::SSL before loading LWP::UserAgent, or override the default socket
class, you are probably using IO::Socket::SSL and do not really need
Crypt::SSLeay.
Before installing Crypt::SSLeay, you may want to try specifying a
dependency on LWP::Protocol::https.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes:
support/testing/tests/package/test_gst1_python.py:29:1: W391 blank line at end of file
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes:
support/testing/tests/package/sample_python_gobject.py:5:1: E302 expected 2 blank lines, found 1
support/testing/tests/package/sample_python_gobject.py:8:7: E111 indentation is not a multiple of four
support/testing/tests/package/sample_python_gobject.py:11:1: E305 expected 2 blank lines after class or function definition, found 1
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes the following flake8 warnings:
support/testing/tests/package/sample_gst1_python.py:5:1: F401 'time' imported but unused
support/testing/tests/package/sample_gst1_python.py:7:1: E402 module level import not at top of file
support/testing/tests/package/sample_gst1_python.py:21:12: W292 no newline at end of file
For the E402 warning, we add a "noqa" marker, as we really want the
gi.require_version() to be before.
There is still one remaining warning to be fixed:
support/testing/tests/package/sample_gst1_python.py:18:28: F821 undefined name 'on_message'
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently, we build a complete AArch64 system, including a kernel. This
can take quite some time.
Switch to an armv7 system, which allows us to use one a prebuilt kernel,
thus significantly reducing the test time.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
[yann.morin.1998@free.fr:
- use a standalone config; don't inherit from TestPythonPackageBase
- use the default external toolchain (ARM, not Linaro)
- rewrite commit log
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
