BR2_BINFMT_FLAT_SEP_DATA can be used to create XIP userland and works fine
for m68k. Unfortunately a lot of basic packages as pcre are not compileable
because of a CPU or hardware limitation. The reason for failing are very
big functions used in the libraries or application code.
Typical errors are:
Fatal error: Tried to convert PC relative branch to absolute jump
or
error: value -yyyyy out of range
Add kernel patch from 4ec5542679 to make
BR2_BINFMT_FLAT_ONE compiled firmware work fine.
Fixes:
http://autobuild.buildroot.net/results/20b/20b1586757450d6aad8583ad7a787a7ca11acef1/http://autobuild.buildroot.net/results/d31/d311955ada1ffcd7f69e82965c8fe33eabe488cd/
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
[Thomas: add comment in Config.in file about sep-data existing on m68k,
but being disabled due to build issues with numerous packages.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Greg Ungerer fixed recently a bug in the Linux kernel, which
allows to use one memory region again.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
[Thomas: cherry-picked from next to master, in order to be able to use
BR2_BINFMT_FLAT_ONE by default on m68k, since BR2_BINFMT_FLAT_SEP_DATA
causes too much problems.]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The pc_x86_64_efi reference defconfig is targeted towards an EFI
environment but the kernel which comes with it does not enable EFI
support by default.
Booting this defconfig without kernel EFI support on a qemu virtual
machine with EFI firmware resulted in no output to tty1 or ttyS0.
Enabling EFI support in the kernel fixed this and seems saner for an EFI
reference Buildroot defconfig.
Adding CONFIG_EFI to board/pc/linux-extras.config also affects
pc_x86_64_bios_defconfig which doesn't require it, however it was
observed that the extra overhead is small and so this is preferred
rather than having a separate config file.
This was tested with qemu 2.6.0 running with kvm enabled and firmware
EFI v2.60 by EDK II. Also built and verified bios defconfig on the same
setup but with BIOS firmware instead.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add support for mips64, which is available since musl 1.1.15.
Only gcc 6.x has required support for it. Tested variations of
little/big endian and hard/soft float.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The BR2_TOOLCHAIN_BUILDROOT_GLIBC option is already not selectable on
BR2_sparc, so there is no need to have an additional "depends on
!BR2_sparc" on each of the glibc versions.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Older toolchains that use binutils <= 2.23.2 are affected by binutils
bug #14887 (https://sourceware.org/bugzilla/show_bug.cgi?id=14887),
where:
someinstruction [ foo, something ]
is not accepted, due to the whitespace after [ and before ], causing the
following build failures for OpenBLAS:
ARM register expected -- `pld [ r1,#512 ]'
Since we don't have any mechanism to add dependencies on binutils
versions, we work around this problem by patching the code to remove the
problematic whitespaces. As there are many many instances of this in the
ARM assembly code of OpenBLAS, we use a sed expression to make this
modification rather than a patch.
Fixes:
http://autobuild.buildroot.net/results/43e50b480b4aea0fdec745d7875c85377c114cac/
[Peter: use single quotes in sed invocation]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Otherwise the build fail with this error:
configure.in:53: error: possibly undefined macro: AC_MSG_ERROR
If this token and others are legitimate, please use m4_pattern_allow.
See the Autoconf documentation.
configure.in:95: error: possibly undefined macro: AM_CONDITIONAL
Also, there is a PKG_CHECK_MODULES used for GTK.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Upstream removed use of the GLOB_BRACE glob(3) GNU extension in release 0.9.4
(commits 493857625 and 8bff82ed9c). See
https://sourceforge.net/p/lirc/tickets/174/.
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The instructions listed sdcard.img as output image name but
board/pc/genimage-*.cfg generate it named as disk.img instead.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The ncurses buildsystem does not recognise 'uclinux' as being a 'linux',
so it falls back to generic checks, especially when trying to decide
what macros to define. So it misses defining absolutely required macros
when doing widechar, which break the bui,d.
But 'uclinux' is just a 'linux' like any other in this respect.
We fix both aclocal.m4 and the generated ./configure script because
ncurses does not autoreconf correctly (see comment in 0001-*.patch).
Fixes:
http://autobuild.buildroot.org/results/d5c/d5c787d34acbfc0c0c7bd8cc0e15b5bc2460d88a/http://autobuild.buildroot.org/results/fc4/fc4b41fb955c390913a879e0202760347ce29987/
[...too many to list...]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
pinentry currently fails to build with gcc 5.x, because it uses some
functionality from std::string that requires C++11 without passing the
appropriate -std= value. We fix this by passing a proper -std= option
when gcc >= 5.x. Note that this can be removed once pinentry is bumped
to the newest version (currently 0.9.7) because they no longer use
std::string in the Qt part.
Fixes:
http://autobuild.buildroot.net/results/6ea64f692acaebc4d58f3371c632b5121500f17e/
(and many, many similar build failures)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
One-beer-granted-to: Yann E. MORIN <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In commit
5ab751ca44 ("toolchain-buildroot: allow to
build ppc64(le) musl toolchains"), support for building a musl toolchain
for ppc64(le) was added. Since this support only works with gcc 6, some
additional dependencies have been added to the older gcc versions so
that they cannot be selected on ppc64(le)/musl.
Unfortunately, the expression of the dependency was wrong, and leads to
those older gcc versions being non-selectable if you're not using
musl. Indeed, the dependencies look like this:
depends on !BR2_powerpc64 && !BR2_powerpc64le && BR2_TOOLCHAIN_USES_MUSL
So as soon as you're not using musl, BR2_TOOLCHAIN_USES_MUSL is false,
so the entire condition is false, and the gcc version is not available.
Due to this, only gcc 6.x can be selected currently with uclibc or
glibc, which is clearly not the intended behavior.
This commit reworks those dependencies to:
depends on !(BR2_TOOLCHAIN_USES_MUSL && (BR2_powerpc64 || BR2_powerpc64el))
which more clearly expresses what we want:
"We don't want to (have a toolchain that uses musl and (be building
either for PPC64 or PPC64le))"
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Otherwise the configure script will probe the distro directories for it
and it may not match what we use, for example fedora uses /etc/pki
instead of /etc/ssl.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This version brings in several bug fixes: one of which partially
addresses Buildroot autobuilder failures for static configurations.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In some older versions of glibc, clock_gettime() is in librt, so we need
to link with librt when clock_gettime() is used. This commit adds a
lirc-tools patch to make sure we link with librt when needed.
Fixes:
http://autobuild.buildroot.net/results/2770360880c9b265c8e019141925e56c35ba22dc/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
While the SourceForge page still exists, it seems to be a bit outdated,
and there is now a much newer Github repository with recent activity, so
mention it as well in the Config.in help text.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The three patches allow to compile applications using TLS emulation from
libgcc or C++ applications.
The patches 892-libgcc-mkmap-symver-support-skip_underscore.patch and
893-libgcc-config-bfin-use-the-generic-linker-version-in.patch fixes how
libgcc is generated, by making the necessary libgcc symbols declared
"GLOBAL", and therefore visible outside of libgcc. This fixes a large
number of undefined reference issues (for either C++ applications or
applications using TLS emulation). This was reported as gcc PR74748.
The patch 894-libgcc-fix-DWARF-compilation-with-FDPIC-targets.patch
allows to build DWARF in FDPIC mode. This patch replaces the older
892-disable-dwarf-bfin.patch, as instead of disabling DWARF support, it
fixes it. This was reported as gcc PR68468.
In order to get C++ working without unresolved symbols, we also need to
disable symbol versioning (--disable-symvers). This is a remaining issue
in gcc which will be investigated at a later point.
Since this commit fixes C++ support in Blackfin, it re-enables the
selection of C++ support for this architecture.
Fixes:
(alsa-lib emutls)
http://autobuild.buildroot.net/results/8544ce58d75820666579db93a25ca5656a8efa8e/
(cairo emutls)
http://autobuild.buildroot.net/results/88b02a5dd5408318941ccbfcea0a9cbaa331500a/
(audiofile c++)
http://autobuild.buildroot.net/results/394e530c5dcd9ccb590eb151aeaadb37d11e0e39/
(assimp c++)
http://autobuild.buildroot.net/results/01f4be126c2d786a5ad7f220c2cf60539888a480/
(bellagio c++)
http://autobuild.buildroot.net/results/ada/ada44228bf13ec05382275bd6571396f5ba2b1f7/
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Tested-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
And drop upstream patch.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With gcc version 6, we get the following error when building jack2:
../tests/iodelay.cpp:170:49: error: narrowing conversion of '-1' from 'int' to 'jack_nframes_t {aka unsigned int}' inside { } [-Wnarrowing]
jack_latency_range_t capture_latency = {-1, -1};
^
../tests/iodelay.cpp:170:49: error: narrowing conversion of '-1' from 'int' to 'jack_nframes_t {aka unsigned int}' inside { } [-Wnarrowing]
../tests/iodelay.cpp:171:50: error: narrowing conversion of '-1' from 'int' to 'jack_nframes_t {aka unsigned int}' inside { } [-Wnarrowing]
jack_latency_range_t playback_latency = {-1, -1};
^
../tests/iodelay.cpp:171:50: error: narrowing conversion of '-1' from 'int' to 'jack_nframes_t {aka unsigned int}' inside { } [-Wnarrowing]
This is fixed by grabbing an upstream commit,
ff1ed2c4524095055140370c1008a2d9cccc5645
Fixes:
http://autobuild.buildroot.net/results/8a8/8a8d533a0f785591fee10f1c09c9294f892ef7f7/
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
