When sstrip is selected it tries to strip kernel modules too.
Unfortunately this fails with a "unrecognized program segment header
size" error thus interrupting the build process.
We introduce a new $(KSTRIPCMD) strip command for this, being a regular
strip when sstrip is selected and an empty stub when not stripping.
At the same time get rid of the REMOVE_SECTION_* variables, as they are
only used once.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Certain toolchain configs (E.G. on blackfin), don't use symlinks, so the
file name to match is the actual SONAME (.so.*). Support these toolchains
as well.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fix previous commit not to strip libthread_db library. In the previous
commit the wildcard was incorrectly matching the symbolic link instead
of the real library file.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
For proper threading debug support, the libthread_db.so library cannot
be stripped on the target. This is because the target gdbserver will
also load up this library at runtime and poke around its symbols.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Often times, the only reason /usr/share exists is because of documentation
installed into it. So once we're done cleaning the docs, attempt to rmdir
/usr/share. If it's empty, things will work out nicely.
[Peter: use make infrastructure to ignore errors rather than shell]
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The installed kernel modules should have useless build cruft stripped out
of them. On my system, a default build went from a very unreasonable 30MB
to a normal 3MB (on disk) and from 14MB to 3MB when compressed due to the
info stored in the kernel modules alone.
[Peter: don't hardcode binutils strip specific options]
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Ensure host packages (dependencies of target packages) are also handled
by make source / make external-deps.
This has to be done a explicitly, as we don't list these in Kconfig,
and hence also not in a variable like TARGETS, so instead we have to
look at the <PKG>_DEPENDENCIES variables for each enabled package and
extract the host packages from there.
Host packages can in turn also have dependencies, so we have to follow
those as well. Ideally this should be done recursively, but as that's
pretty hard to do in make, it is limited to 1 level for now.
Finally, host packages share source files with target packages, so
pipe output of make external-deps through sort -u to ensure duplicates
are removed.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#2731
Bootloader and Linux kernel steps can add content to the rootfs, so ensure
the cleanup / postprocess steps are moved after those.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The configuration cache shared between packages, while being in
principle a nice idea to speed-up the configuration of packages by
avoiding repetitive identical checks, turned out to be unreliable due
to the subtle differences between similar but not identical checks in
different packages. After spending some time trying to fix those, we
concluded that supporting the shared configuration cache is definitely
too hard and too unreliable, and that we'd better get rid of it
altogether.
This patch therefore removes the shared configuration cache
infrastructure and usage.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
It seems that target-specific variables don't mix with target rules.
Thanks to Yann for helping debugging the issue.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Some packages use the buildroot version string (to set their own version
string). Computing the version string globally will makes it easy for
them to use it instead of re-computing it in every packages.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This re-instates writing the version string in .config headers, and no
longer provides it as a kconfig symbol in .config (it is now a variable
in the Makefile, and in the environment).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Move it down, users should not mess with it.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Default HOST_CFLAGS to -O2, so host tools (like the cross compiler) are
built with optimization by default.
Based on a patch by Will Newton <will.newton@gmail.com>.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#2707
It's not only for kernel headers, and the kernel headers .mk file
isn't included for crosstool-ng toolchain, which broke linux/u-boot/..
builds.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
And all the infrastructure surrounding it. A broken sed implementation
is quite rare nowadays, as seen by the fact that the current host-sed
support has been broken for a while, so just get rid of it.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The top-level Makefile can be executed in parallel, as it causes problems.
We can force make to be not parallel.
It's been reported many times, and recent discussions on IRC with kos_tom,
and user nick-named knee, led to this patch.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
If building out-of-tree, add a Makefile wrapper that calls-out to the real
Makefile with proper args.
Avoids having to pass -C and O= every time we call make.
This is highly inspired from how the Linux kernel does it, and portions of
it have been used. We can't use exactly the same implementation as the
kernel does, because:
- the script writing the wrapper has been expunged of the few lines
that were too kernel-related: in buildroot we do not need the version
string in the wrapper, and we do not have a patchlevel version;
- "in-tree build" does not have the same meaning for the kernel and for
buildroot: for the kernel, $(O) point to the $(TOPDIR), while for
buildroot $(O) points to $(TOPDIR)/output.
For more complete explanations, see:
http://lists.busybox.net/pipermail/buildroot/2010-September/037815.html
[Peter: minor tweaks]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998 at anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The new DL_MODE variable dispatches between the various download
implementations of each method (Git, Subversion, Wget) to deal with the
normal download (default mode, 'DOWNLOAD'), the source-check
('SOURCE_CHECK') and to show the external dependencies for external-deps
('SHOW_EXTERNAL_DEPS').
For the latter, the legacy script wget-show-external-deps.sh is no
longer required as $(WGET) isn't called directly anymore but always
through the DOWNLOAD helper.
Signed-off-by: Maxime Petazzoni <maxime.petazzoni@bulix.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It's not really necessary to differenciate the commands for checking out
or updating a repository. Only the path to the binary and eventual
top-level flags are useful to configure.
Signed-off-by: Maxime Petazzoni <maxime.petazzoni@bulix.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In preparation for the re-work of the DOWNLOAD helper to support
multiple download methods and protocols, the spider feature used with
wget is removed for now until it is re-implemented on top of the new
download methods.
Signed-off-by: Maxime Petazzoni <maxime.petazzoni@bulix.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The previous commit has removed calls to conf_write_autoconf(), which
is the function that generates the KCONFIG_AUTOCONF,
KCONFIG_AUTOHEADER, KCONFIG_TRISTATE files and the split config (with
one file per config item). Therefore, those things were not generated
anymore before the build.
In order to get them generated before the build, we use the same
mechanism as the kernel: run a silentoldconfig when the .config file
is newer than the KCONFIG_AUTOCONF file.
In Buildroot, all those elements are not really used today, except the
split config which is used a little bit in the toolchain build, in a
try to make sure the toolchain gets rebuilt properly when the
configuration changes. It does not seem that this work has been
completed.
However, as we want to keep the same behaviour as previously, we have
to generate all those elements before starting the build.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
savedefconfig allows to create a minimal defconfig file from an
existing configuration. For example :
make O=/path/to/some/buildroot/build/directory savedefconfig
will generate a minimal 'defconfig' file in the main Buildroot source
directory.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Instead of duplicating the definition of KCONFIG_AUTOCONFIG,
KCONFIG_AUTOHEADER and BUILDROOT_CONFIG, let's define them in a
COMMON_CONFIG_ENV variable, which is used by all the xconfig, gconfig,
menuconfig, nconfig, config, oldconfig, randconfig, allyesconfig,
allnoconfig, randpackageconfig, allyespackageconfig,
allnopackageconfig, defconfig, %_defconfig targets.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Our kconfig-to-buildroot2.patch hasn't been kept up to date with all
the changes made into package/config, and a single patch wasn't very
practical to maintain all our changes. Therefore, this commit adds a
package/config/patches directory, which contains a Quilt series of
patches that correspond to our modifications to the kconfig mechanism.
The huge kconfig-to-buildroot2.patch has been split into 16 smaller
patches. The purpose of some of the modifications has been clearly
identified, while some others were not identified.
The 16 patches together do match exactly the old
kconfig-to-buildroot2.patch. We have been very careful in making sure
that we wouldn't loose any of our modifications.
The only modifications made are :
* Instead of renaming the kernel Makefile to Makefile.kconfig and
naming the Buildroot Makefile just 'Makefile', we instead keep the
original package/config/Makefile from the kernel
scripts/kconfig/Makefile and name the Buildroot Makefile
package/config/Makefile.br. The main Buildroot Makefile is modified
accordingly.
* The documentation README.buildroot2 is updated to explain how to
upgrade to a newer version of scripts/kconfig.
* The kconfig-language.txt documentation is removed, as anybody can
easily find it in the kernel sources so there's no need to
duplicate it here.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
There's no need to have a .defconfig, when you run make menuconfig,
make xconfig or anything else for the first time, it will just start
with the default configuration anyway. This is what the kernel does.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Recent versions of ldconfig require the directory /var/lib/ldconfig,
otherwise they bail out with an error. Moreover, having a
/etc/ld.so.conf file also avoids a warning.
In addition to this, we remove the redirection of stderr, so that
errors remain visible to the user.
Thanks to Baruch Siach, Andy Gibbs and Darcy Watkins for investigating
the issue and proposing solutions.
This fixes the build on recent distributions such as Fedora 13 or
Gentoo.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Based on patch by Will Wagner <will_wagner@carallon.com>.
Now that the .config is located in the output directory when O=<dir>
is used, we have to pass the O= option to make for
source/source-check/external-deps to get them to look in the right place
for the .config.
Fix it by introducing an EXTRAMAKEARGS variable and use it whenever we
call back into the toplevel Makefile.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
* Remove $(TARGET_DIR)/usr/share/aclocal from target-finalize when not
installing devfiles and
* Remove some (now) redundant cleanup from individual packages
Signed-off-by: Malte Starostik <m-starostik@versanet.de>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Including a bunch of Makefiles with wildcard makes it impossible to add
new toolchain backends. Avoid that by namely including needed files.
The external toolchain still needs to include all the toolchain/*/*.mk
sub-makefiles, as they are needed to build a toolchain that runs on the
target. It is to be noted that the cross-toolchain is not built in this
case, as the make-targets to build the cross-toolchain are not present
in the $(BASE_TARGETS) variable, which is later used to create the
dependency rules.
Also, the comment 'Explicit ordering' has been removed, as it is mis-
leading. It is make's responsibility to create the proper ordering based
on the dependency rules it finds in the Makefiles
Signed-off-by: Yann E. MORIN <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The helper functions used for external toolchains may also be useful
to alternate toolchain backends (currently, the external toolchain is
the sole user).
Signed-off-by: Yann E. MORIN <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Commit ed0d45fdd (Choose host/target ldconfig based on availability)
added a runtime check for a cross-ldconfig being available.
Unfortunately this checks runs too early (at package/Makefile.in parsing
time), so it always fails when using an internal toolchain as ldconfig
isn't built yet.
Fix it by moving the check to the only place it is used (target-finalize).
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
We now have for quite some time a configuration cache used to speed-up
the execution of ./configure scripts when compiling programs for the
target. This commit introduces a similar concept when Buildroot
compiles programs for the host.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We don't actually need to explicitly clean the kconfig stuff, as distclean
already removes the entire BUILD_DIR, but fix up the packag/config makefile
to do the right thing if make clean/distclean is called manually for
completeness.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This patch introduces a single, simple, infrastructure to build the
Linux kernel. The configuration is limited to :
* Kernel version: a fixed recent stable version, same as kernel
headers version (for internal toolchains only), custom stable
version, or custom tarball URL
* Kernel patch: either a local file, directory or an URL
* Kernel configuration: either the name of a defconfig or the
location of a custom configuration file
* Kernel image: either uImage, bzImage, zImage or vmlinux.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Make sure we only pass O=<path> if we were originally called like that,
otherwise we might end up looking for the .config in the wrong place.
Likewise, when changing between using O= or not (or simply running
make <blah>_defconfig in a pristine source tree), we do end up having
a .config, but no .config.cmd. It isn't really critical so just continue
even if we couldn't read it.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Support the GTK variant of the graphical kconfig configurator as an
alternative to the Qt3-based one.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Otherwise u-boot tools / kernel modules are only added to target AFTER
the filesystems are built.
Long term u-boot/kernel stuff should get splitted from target/device,
but this is the safest solution for now.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
GNU_HOST_NAME is referred more than 100 times in the tree, used 5
times during startup, and is relatively expensive to run - so make
it a simple expanded variable (:=) rather than recursively expanded
one (=).
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
On my target rootfs it is installed documentation for:
atk, cairo, gdk, gdk-pixbuf, gio, glib, gobject, gtk, pango
It ocupies 34M of space. Configure option --disable-gtk-doc doesn't
prevent installation of it. So we should remove them manually if
documentation is disabled.
[Peter: also remove manual rm's from hal/libxml2/libglade]
Signed-off-by: Paulius Zaleckas <paulius.zaleckas@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Instead of asking the user about the GNU target suffix, just compute
it automatically from the other configuration options.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The definition of TOOLCHAIN_DIR is the same regardless of whether
external or internal toolchains are used. Moreover, move its
definition together with all the other *_DIR definitions.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Instead of having a configuration option BR2_GNU_BUILD_SUFFIX, let's
use config.guess to guess the build system type.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Until now, we had BR2_HAVE_MANPAGES, BR2_HAVE_INFOPAGES and
BR2_HAVE_DOCUMENTATION, but there's no need to have such a
fine-grained control over what documentation gets kept or not.
Therefore, just remove all the documentation (man pages, info pages
and documentation in $(TARGET_DIR)/usr/doc and
$(TARGET_DIR)/usr/share/doc) when BR2_HAVE_DOCUMENTATION is not set.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Strangely enough O is still passed to submakes with MAKEOVERRIDES
(with make 3.81 atleast), the only thing that changes is the output
of the origin function (command line -> environment).
Unfortunately some packages don't look at origin (E.G. uClibc 0.9.31+)
To really make O go away, we have to override it.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Lay down the path to add more than two toolchain kinds:
- check the type of toolchain as:
ifeq (toolchain_buildroot,y)
blabla buildroot-specific
else ifeq (toolchain_external,y)
blabla external-specific
endif
- prefer using positive checks, a-la:
ifeq (foo,y)
instead of:
ifneq (bar,y)
(where foo and bar are mutually exclusive)
- have the toolchain_buildroot case always appear first
- gettext is handled differently, because we want to add an option
only if not using the buildroot toolchain, hence we use ifneq.
Signed-off-by: Yann E. MORIN <yann.morin.1998@anciens.enib.fr>
Acked-By: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This fixes the build of libcap, with external toolchain, when it is
the first package being built.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Create tarballs with git-archive so we're sure they don't contain
anything not in git (E.G. local backup configs).
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
BR2_VENDOR_GDB_VERSION and VENDOR_GDB_VERSION are no longer settable.
The only user is gdb, and it's totally useless in this case.
Signed-off-by: Yann E. MORIN <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The BR2_VENDOR_SUFFIX and VENDOR_SUFFIX variables are no longer settable.
The only user is gdb, and is totally useless in this case.
Signed-off-by: Yann E. MORIN <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#823.
~ is commonly used as a suffix to editor backup files.
Remove these files, just as we remove CVS-directories and
.empty-files.
[Peter: tweaked to remove in same find invocation as .empty]
Signed-off-by: Anders Darander <ad@datarespons.se>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Reported by Bjørn Forsman <bjorn.forsman@gmail.com>.
If CDPATH is set in the environment, cd <dir> will print the absolute path
of <dir>, causing various trouble (The most critical being BASE_DIR ending
up as <path> <path> which breaks basically everything).
Fix it by clearing CDPATH. Notice that export doesn't affect the environment
of $(shell ..) calls, so explicitly throw away any output from cd in the
BASE_DIR shell call.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The config cache might contain invalid values when .config is changed
(E.G. when adding/removing libraries), so drop it so config checks are
rerun for new packages (existing package still won't be rebuilt).
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Reported by mr_claus on IRC.
This ensure DL_DIR is always an absolute path, like it was before the
build dir reorganization - Fixes vim (patch) build.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As discussed on the list, fixup the *clean targets, so we now have:
clean: remove all generated files (E.G. everything in output/)
distclean: same as clean, but also remove the kconfig build and .config
Also tweak 'make help' output to match. This also merges the two
different clean / distclean targets we had depending on if there was
a .config present or not (most variables are not defined for !.config
case, so E.G. the clean target ends up being a noop).
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As discussed earlier on the mailing list. It simplifies code, gives more
sensible error message on typos and makes the defconfigs easier to find
for users.
Furthermore, update documentation to match.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Similar to the normal targets, but only affects the BR2_PACKAGE_* options.
E.G. handy for keeping your current toolchain config while testing
(random) packages.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
get rid of the removed saveconfig/getconfig targets, and instead document
randconfig/defconfig/allyesconfig/allnoconfig.
Furthermore, get rid of the unused tags target.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
To reflect the new output directory hierachy rename the Makefile variable
TOOL_BUILD_DIR to TOOLCHAIN_DIR.
Signed-off-by: Michael Roth <mroth@nessie.de>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In the output directory, we now have
- build/ where all the packages are built
- images/ where the final kernel and rootfs images are stored
- staging/ the staging directory (containing the development files
and libraries compiled for the target)
- target/ which contains the target root filesystem
- host/ which contains all the host programs
- stamps/ which contains the stamps files
Therefore, the build_ARCH and toolchain_build_ARCH have been
removed. People willing to use the same Buildroot sources to compile
for different architectures are invited to use the O= command line
option for out-of-tree compilation.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Instead of putting all the build-related stuff as a mess in the
Buildroot sources, group them in an output/ directory.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This can be achieved by adding a new target in target/device/, and I
will later propose a mechanism to add external boards and packages, so
that our users not willing to get their target-specific or
package-specific things merged can keep them cleanly separated from
Buildroot tree.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The "project" feature was designed to allow to several projects to be
built inside the same Buildroot source tree and allowing the toolchain
and non-configurable packages to be shared between the different
projects on the same architecture. While being interesting in theory,
this feature adds a level of complexity to Buildroot, both from an
user perspective and from a developer perspective, while one of the
main Buildroot strengh is to be simple. Moreover, this feature is only
seldomly used by our users.
From a user-level perspective, this for example allows to remove the
project_build_ARCH directory, which was very confusing. The
autotools-stamps directory is also removed, since these stamps are
back at their normal location.
Description of the changes involved :
* project/, directory removed
* Makefile
- Don't include project/Makefile.in and project/project.mk anymore
- Grab a copy of the contents of project/Makefile.in at the
location it was imported, but remove the definition related to
PROJECT_BUILD_DIR. The TARGET_DIR is now in
$(BUILD_DIR)/target_dir
- Remove the creation/removal of the $(PROJECT_BUILD_DIR) and
$(PROJECT_BUILD_DIR)/autotools-stamps directories
- Don't make world depends on target-host-info. This target was
defined by project/project.mk to customize /etc/issue,
/etc/hostname and create /etc/br-version depending on the
project definitions. We can of course imagine re-adding such a
feature later.
- Replace PROJECT_BUILD_DIR by BUILD_DIR everywhere
- Remove the update, log and lognr.$(PROJECT) target, they were
specific to the project feature.
* package/Makefile.autotools.in
- Replace PROJECT_BUILD_DIR by BUILD_DIR for the location of the
configure cache
- Move the INSTALL_TARGET and HOOK_POST_INSTALL stamps to the same
directory as the other stamps (i.e, in the package directory).
* package/Makefile.in
- Replace PROJECT_BUILD_DIR by BUILD_DIR for the location of the
configure cache
* package/at/at.mk,
package/busybox/busybox.mk,
package/busybox/initramfs.mk,
package/customize/customize.mk,
package/linux-fusion/linux-fusion.mk,
package/ltp-testsuite/ltp-testsuite.mk,
package/nfs-utils/nfs-utils.mk,
target/cpio/cpioroot.mk,
target/cramfs/cramfs.mk,
target/device/Atmel/DataFlashBoot/DataflashBoot.mk,
target/device/Atmel/Makefile.in,
target/device/Atmel/at91bootstrap/at91bootstrap.mk,
target/device/KwikByte/Makefile.in,
target/ext2/ext2root.mk,
target/initramfs/initramfs.mk,
target/iso9660/iso9660.mk,
target/jffs2/jffs2root.mk,
target/linux/Makefile.in,
target/romfs/romfs.mk,
target/squashfs/squashfsroot.mk,
target/tar/tarroot.mk,
target/ubifs/ubifsroot.mk
- Replace PROJECT_BUILD_DIR by BUILD_DIR
* target/device/Config.in
- Do not include project/Config.in anymore
* target/linux/Makefile.in.advanced
- Replace PROJECT_BUILD_DIR by BUILD_DIR
- Store the stamps file in $(STAMP_DIR) instead of
$(PROJECT_BUILD_DIR)/autotools-stamps
* target/u-boot/Makefile.in
- Replace PROJECT_BUILD_DIR by BUILD_DIR
- Remove $(PROJECT) from the U-Boot target binary name
- Remove the insertion in the configuration of the project name as
the hostname
- The u-boot-autoscript target now generates
$(U_BOOT_AUTOSCRIPT).img instead of
$(U_BOOT_AUTOSCRIPT).$(PROJECT)
* toolchain/gcc/gcc-uclibc-3.x.mk
toolchain/gcc/gcc-uclibc-4.x.mk
- Move the stamps files to $(STAMP_DIR)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
