Small optimization so we don't have another 'make' level (caused by the
umask fix) when running the generated makefile.
Signed-off-by: Guido Martínez <guido@vanguardiasur.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The introduction of <pkg>_STRIP_COMPONENTS broke the build of the
target tar package, because support/dependencies/check-host-tar.mk
defines TAR_STRIP_COMPONENTS to --strip-components. Which leads to
have the package infrastructure do:
$$(TAR_STRIP_COMPONENTS)=$$($(2)_STRIP_COMPONENTS)
which for the tar package evaluates to:
$$(TAR_STRIP_COMPONENTS)=$$(TAR_STRIP_COMPONENTS)
which evalutes to:
--strip-components=--strip-components
Which obviously doesn't work really well. And in fact the
TAR_STRIP_COMPONENTS definition in
support/dependencies/check-host-tar.mk is no longer necessary: it was
needed in the days where we were trying to support old tar versions
that did not support --strip-components. But nowadays, when such an
old tar version is encountered, we build our own host-tar which
supports --strip-components.
Fixes:
http://autobuild.buildroot.org/results/ae2/ae20df67f99f75b1ba5d5b7316ad265d66f3aa66/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is useful when a tag is not avaiable.
Also fix support for Fedora where the command "cvs -r :<version>" doesn't work.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Kconfiglib now runs as either Python 2 or Python 3.
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
These weren't available when gen-manual-lists.py was first written.
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Buildroot doesn't use $srctree from what I could tell.
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Corresponds to a95f477 in https://github.com/ulfalizer/Kconfiglib.
Fixes:
- Unset user values when loading a zero-byte .config. (5e54e2c)
- Ignore indented .config assignments. (f8a7510)
- Do not require $srctree to be set for non-kernel projects. (d56e9c1)
- Allow digits in $-references to symbols. (ecacdd5)
- Add Symbol.is_allnoconfig_y(). (deaa624)
- Fix small output issue with Comments inside Choices.
Also adds Python 3 support and has a lot of internal cleanup and
optimization.
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The following allows a user definition to specify that a created user
entry should not have a password value set. Original implementation
allowed a user definition to provide a password value of "=" (no quotes)
to generate a crypt-encoded empty string value. In some cases, it may be
desired to have no value specified for a user's password. By using a
value "-" for a password, no value will be set in the shadow value.
An example when this can be used is when logging into a terminal.
Logging into a session with an encoded empty password will prompt a user
to enter a password since it does not know the password is empty. If the
password field blank, a login session will not prompt for a password.
Signed-off-by: James Knight <james.knight@rockwellcollins.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Following commit 95a572282e (pkg-infra: move the git download helper to a
script, 2014-07-02), move the comment describing the shallow clone trickery as
well. Merge this comment with the existing helper comment that was added in
7e40a1103a (support/download: convert git to use the wrapper, 2014-08-03).
Rename $($(PKG)_DL_VERSION) to ${cset} to match the helper code context.
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that custom external toolchains to be downloaded properly instruct
to not fail on a missing hash, restore the mandatory hash check for
everything else.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In very constrained cases, it might be needed to not fail if a hash is
missing. This is notably the case for custom external toolchains to be
downloaded, because we do have a .hash file for external toolchains,
but we obviously can not have hashes for all existing custom toolchains
(he, "custom"!).
So, add a way to avoid failing in that case.
>From the Makefile, we export the list of files for which not to check
the hash. Then, from the check-hash script, if no check was done, and
the file we were trying to match in in this exclusion list, we just exit
without error.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
changes v6 -> v7:
- /beautify/ the pattern in the case clause
Changed v5 -> v6: (Arnout)
- fix the pattern in the case clause
Changes v4 -> v5:
- micro-optimisation, use case-esac instead of a for-loop (Arnout)
- typoes (Arnout)
Changes v3 -> v4:
- drop the magic value, use a list of excluded files (Arnout)
Changes v1 -> v2:
- fix typoes in commit log
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For clarity, this commit renames the TARGETS variable to the more
meaningful PACKAGES variable. Indeed, only packages (handled by one of
the package infrastructures) should be listed in this variable, and
not other random non-package targets.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas: fix issues noticed by Arnout:
- Rewrap the linux/Config.in paragraph
- Revert the "is a toolchain dependency" -> "has a toolchain
dependency" change from pkg-generic.mk, as the original was
correct.]
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When downloading from a repository, we explicitly pass no hash file,
because we can't check hashes in that case.
However, we're still printing a message that there is a missign hash
file.
Beside being a bit annoying (since we can't do anything about it), it
may also be wrong, especially for packages for which we support multiple
versions, with some being downloaded via a git clone and others as
tarballs.
Just print no warning when the path to the hash file is empty.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When the user selects a custom toolchain to be downloaded, there's no
hash for that toolchain, so the download fails, now that hashes are
mandatory.
Fix that by simply exiting as if there was no error, until we have a
better fix...
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Instead of silently accepting a missing .hash file, print a warning.
This can be grepped from a build log, to find packages that still have
no hash, with the long-term goal of adding hashes for all packages.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
At the time we introduced hashes, we did not want to be too harsh in the
beginning, and give people some time to adapt and accept the hashes. So
we so far only whined^Wwarned about a missing hash (when the .hash file
exists).
Some time has passed now, and people are still missing updating hashes
when bumping packages.
Let's make that warning a little bit more annoying...
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When checking hashes reports no hash for a file, and this is treated as
an error (now: because BR2_ENFORCE_CHECK_HASH is set; later: because
that will be the new and only behaviour), exit promptly in error.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Return different exit codes depending on the error that occured:
0: no error (hash file missing, or all hashes match)
1: unknown option
2: hash file exists, but at least one hash in error
3: hash file exists, but no hash for file to check
4: hash file exists, but at least one hash type unknown
This will be used in a later patch to decide whether the downloaded file
should be kept or removed.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Samuel Martin <s.martin49@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add support to explicitly state that an archive has no hash.
This can be used for archives downloaded from a repository, like a
git-clone or a subversion checkout, or using the github helper.
This will come in handy when we'll eventually make hashes mandatory as
soon as a .hash file exists: for some packages, like gcc, some versions
are downloaded as archives from upstream, while other versions may come
from a GitHub repository (via the github herlper).
In this case, a .hash file would exist, that contains hashes for the
downloaded tarballs, but archives downloaded from the repository would
not have a hash (since it is currently not possible to have reproducible
such archives). So, we'd need a way to explicitly state there is no
hash, on purpose, for those archives.
So, add 'none' as a new type of hash.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, specifying a hash file for our download wrapper is mandatory.
However, when we download a git, svn, bzr, hg or cvs tree, there's by
design no hash to check the download against.
Since we're going to have hash checking mandatory when a hash file
exists, this would break those downloads from a repository.
So, make specifying a hash file optional when calling our download
wrapper and bail out early from the check-hash script if no hash file is
specified.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Like for --stop-on, make --exclude recognise the keyword 'virtual',
to stop on virtual packages (as explained in the help...).
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Similar to --stop-on, but also omits the package from the graph.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Francois Perrad <fperrad@gmail.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Francois Perrad <fperrad@gmail.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add a new option to graph-depends, that users can set to stop the graph
on a specific (set of) package(s).
This accepts any actual package name, or the 'virtual' keyword to stop
on virtual packages.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Francois Perrad <fperrad@gmail.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The current error messages are a bit terse, and do not provide all the
required information.
Expand them to provide more context.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Tom Elliott <tommygunsster@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This change prevents CMake from searching outside the sysroot location
for CMake modules when cross-compiling.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Most of targets listed in TARGET_EXCEPTIONS these days are long
gone, so why still keep them?
Most of those targets were removed in this commit:
http://git.buildroot.net/buildroot/commit/?id=02b88600312554bf166f6cfd71f7f2ede783096a
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
virtual packages are found by their version,
so we retrieve the version of all packages
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This makes "make menuconfig" also work on systems where ncurses is not
installed in a standard location (such as on NixOS).
This patch changes ccflags() so that it tries pkg-config first, and only
if pkg-config fails does it go back to the fallback/manual checks. This
is the same algorithm that ldflags() already uses.
[This patch is already applied upstream (is part of linux v3.18):
https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=be8af2d54a66911693eddc556e4f7a866670082b
I'm adding this instead of doing a full upstream kconfig sync because
there was a conflict in one of the Buildroot kconfig patches (against
linux 3.18-rc1), which I was unable to resolve. Just drop this patch next time
Buildroot kconfig is synced against upstream.
]
Signed-off-by: Bjørn Forsman <bjorn.forsman@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We expresely call printf in the git helper, calls which were not
addresed in the previous silent-build patchset.
Just redirect stdout to oblivion when being silent.
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Tested-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
If doing a silent build (make -s -> QUIET=-q), silence all downloads,
by passing the -q flag downward to backends as well as to check-hash.
Change a printf to use the trace functions.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add an option flag to all backends, as well as the check-hash script, so
as to silence download helpers when the user wants a silent build.
Additionaly, make the default be verbose.
Inspired by Fabio's patch on git/svn.
[Thomas: fix a typo "Environemnt" -> "Environment"
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add patch to support newer (>2.4.2) versions.
Adjust patch logic to check for patchlevel greater than 2 (apply new patch) or
not (apply current patch).
Some people/distributions used unreleased versions, with the string being
2.4.2.x, this packages are AUTORECONFed and have to be kept like this since
the up-to-2.4.2 patch doesn't work, neither does the from-2.4.3 version patch.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In some cases, upstream just update their releases in-place, without
renaming them. When that package is updated in Buildroot, a new hash to
match the new upstream release is included in the corresponding .hash
file.
As a consequence, users who previously downloaded that package's tarball
with an older version of Buildroot, will get stuck with an old archive
for that package, and after updating their Buildroot copy, will be greeted
with a failed download, due to the local file not matching the new
hashes.
Also, an upstream would sometime serve us HTML garbage instead of the
actual tarball we requested, like SourceForge does from time for as-yet
unknown reasons.
So, to avoid this situation, check the hashes prior to doing the
download. If the hashes match, consider the locally cached file genuine,
and do not download it. However, if the locally cached file does not
match the known hashes we have for it, it is promptly removed, and a
download is re-attempted.
Note: this does not add any overhead compared to the previous situation,
because we were already checking hashes of locally cached files. It just
changes the order in which we do the checks. For the records, here is the
overhead of hashing a 231MiB file (qt-everywhere-opensource-src-4.8.6.tar.gz)
on a core-i5 @2.5GHz:
cache-cold cache-hot
sha1 1.914s 0.762s
sha256 2.109s 1.270s
But again, this overhead already existed before this patch.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Instead of repeating the check in our download rules, delegate the check
of the hashes to the download wrapper.
This needs three different changes:
- add a new argument to the download wrapper, that is the full path to
the hash file; if the hash file does not exist, that does not change
the current behaviour, as the existence of the hash file is checked
for in the check-hash script;
- add a third argument to the check-hash script, to be the basename of
the file to check; this is required because we no longer check the
final file with the final filename, but an intermediate file with a
temporary filename;
- do the actual call to the check-hash script from within the download
wrapper.
This further paves the way to doing pre-download checks of the hashes
for the locally cached files.
Note: this patch removes the check for hashes for already downloaded
files, since the wrapper script exits early. The behaviour to check
localy cached files will be restored and enhanced in the following
patch.
[Thomas: fix minor typo in comment.]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Instead of repeating the same test again and again in all our download
rules, just delegate the check for an already downloaded file to the
download wrapper.
This clears up the path for doing the hash checks on a cached file
before the download.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Instead of relying on argument ordering, use actual options in the
download wrapper.
Download backends (bzr, cp, hg...) are left as-is, because it does not
make sense to complexify them, since they are almost very trivial shell
scripts, and adding option parsing would be really overkill.
This commit also renames the script to dl-wrapper so it looks better in
the traces, and it is not confused with another wrapper.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since a while, the semantic of BR2_PREFER_STATIC_LIB has been changed
from "prefer static libraries when possible" to "use only static
libraries". The former semantic didn't make much sense, since the user
had absolutely no control/idea of which package would use static
libraries, and which packages would not. Therefore, for quite some
time, we have been starting to enforce that BR2_PREFER_STATIC_LIB
should really build everything with static libraries.
As a consequence, this patch renames BR2_PREFER_STATIC_LIB to
BR2_STATIC_LIBS, and adjust the Config.in option accordingly.
This also helps preparing the addition of other options to select
shared, shared+static or just static.
Note that we have verified that this commit can be reproduced by
simply doing a global rename of BR2_PREFER_STATIC_LIB to
BR2_STATIC_LIBS plus adding BR2_PREFER_STATIC_LIB to Config.in.legacy.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
This is rarely needed by packages, but convenient to have when it is.
[Thomas:
- don't define ARM_VARIANT as this name is too global, use
CMAKE_SYSTEM_PROCESSOR_ARM_VARIANT instead.
- don't use ifndef, but a more traditional else clause, for the
non-ARM cases.]
Signed-off-by: Volker Krause <volker.krause@kdab.com>
Reviewed-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Reviewed-by: Romain Naour <romain.naour@openwide.fr>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Dependencies from metacpan comes as a list of modules which is
transformed in a list of distribution for BR. Different modules could
be included in the same distribution, so duplication is possible.
This can for example be seen with the HTTP-Daemon module, which would
get two times the dependencies on HTTP-Message without this commit.
[Thomas: slightly extend commit log.]
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The screen is cluttered when we build for 32 bit target and 32 bit gcc
is missing.
~/buildroot$ make
[...]
/usr/bin/ld: cannot find crt1.o: No such file or directory
/usr/bin/ld: cannot find crti.o: No such file or directory
/usr/bin/ld: skipping incompatible /usr/lib/gcc/x86_64-linux-gnu/4.9/libgcc.a when searching for -lgcc
/usr/bin/ld: cannot find -lgcc
/usr/bin/ld: skipping incompatible /usr/lib/gcc/x86_64-linux-gnu/4.9/libgcc_s.so when searching for -lgcc_s
/usr/bin/ld: cannot find -lgcc_s
/usr/bin/ld: cannot find -lc
/usr/bin/ld: skipping incompatible /usr/lib/gcc/x86_64-linux-gnu/4.9/libgcc.a when searching for -lgcc
/usr/bin/ld: cannot find -lgcc
/usr/bin/ld: skipping incompatible /usr/lib/gcc/x86_64-linux-gnu/4.9/libgcc_s.so when searching for -lgcc_s
/usr/bin/ld: cannot find -lgcc_s
/usr/bin/ld: cannot find crtn.o: No such file or directory
collect2: error: ld returned 1 exit status
[...]
Your Buildroot configuration needs a compiler capable of building 32 bits binaries.
The final note is enough, and adding 2>/dev/null to the gcc test
invocation is also more consistent with the rest of the script. The
patch makes the '/usr/bin/ld:' and 'collect2:' lines go away.
Signed-off-by: Jens Stimpfle <debian@jstimpfle.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When g++ is not installed, a misleading error message turns up because
of a bad combination of an unquoted shell variable and control flow.
~/buildroot$ make
You may have to install 'g++' on your build machine
/home/testuser/buildroot/support/dependencies/dependencies.sh: 136: [: -lt: unexpected operator
[Thomas:
- fixed commit log, as per the suggestion of Yann E. Morin.
- don't change existing empty new lines, suggested by Yann.
- use positive logic in the newly added test, suggested by Yann.]
Signed-off-by: Jens Stimpfle <debian@jstimpfle.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
module could be removed of the core,
so check if the module is currently in the core,
but not if the module was once time included in the core.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The argument are correctly used, but incorrectly documented.
Inverse the comments to match the actual usage.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When we set LD_LIBRARY_PATH when building our host tools, we append any
pre-existing value to our custom path:
LD_LIBRARY_PATH="$(HOST_DIR)/usr/lib:$(LD_LIBRARY_PATH)"
But then if LD_LIBRARY_PATH was previously empty, we end up with an
LD_LIBRARY_PATH that ends with a colon.
Also, when we check that an existing LD_LIBRARY_PATH does not contain
CWD, we previously did not look for a zero-length prefix.
Since 'man ld.so' says of LD_LIBRARY_PATH:
A colon-separated list of directories in which to search for ELF
libraries at execution-time. Similar to the PATH environment
variable.
And POSIX states about PATH:
A zero-length prefix is a legacy feature that indicates the current
working directory.
And bash also recognises a zero-length prefix to search in CWD:
A zero-length (null) directory name in the value of PATH indicates
the current directory.
We may thus end up on a system where a zero-length prefix in
LD_LIBRARY_PATH is interpreted as CWD.
Do not append the previous LD_LIBRARY_PATH if it was empty, and check
for a zero-length prefix when checking dependencies.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
retrieve MD5 and SHA256 from metacpan.org, and store them in the hash
file for each package.
[Thomas: remove the odd indentation of the filename for the md5 hash
lines in the hash file.]
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Not all systems have /bin/bash (e.g. NixOS[1] doesn't). Buildroot
already uses /usr/bin/env shebangs for other interpreters (perl,
python), so why not bash?
This changes only the shebangs used by Buildroot itself; stuff installed
to the target system is left unchanged.
With this applied I can run Buildroot unmodified on NixOS.
[1]: http://nixos.org/
Signed-off-by: Bjørn Forsman <bjorn.forsman@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The make "-s" option is used to enable the "Silent operation" so if that
option is used don't print anything as far as there isn't any error.
Add the "-s" option to "apply-patches.sh" to enable silent operation.
[Peter: use the existing QUIET variable]
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Let mkusers create groups alone, useful for supplementary permissions in
udev/systemd for example where users can be added to later at runtime.
Use a magic string "-" to signal that user creation should be skipped.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As discussed during the Buildroot meeting, this commit extends the
pkg-stats script to include statistics about the number of packages
having vs. not having the hash file.
As of today, we have 104 packages with the hash file, and 1274
packages without.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently the graph-build-time script prints a python exception if a
needed module cannot be imported. Catch the exception and tell the user
which packages are missing, as we do for other missing dependencies.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This instruction in the middle of 'import' lines looks very strange.
Also, it was not obvious to me what the 'Agg' backend is.
Both things are actually correct, but it took a while to find out why.
So clarify with a comment to save someone else's time.
[Peter: fix s/soe/some/ typo]
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Sascha Arthur <sascha.arthur@gmail.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Buildroot coding style defines one space around make assignments and
does not align the assignment symbols.
This patch does a bulk fix of offending packages. The package
infrastructures (or more in general assignments to calculated variable
names, like $(2)_FOO) are not touched.
Alignment of line continuation characters (\) is kept as-is.
The sed command used to do this replacement is:
find * -name "*.mk" | xargs sed -i \
-e 's#^\([A-Z0-9a-z_]\+\)\s*\([?:+]\?=\)\s*$#\1 \2#'
-e 's#^\([A-Z0-9a-z_]\+\)\s*\([?:+]\?=\)\s*\([^\\]\+\)$#\1 \2 \3#'
-e 's#^\([A-Z0-9a-z_]\+\)\s*\([?:+]\?=\)\s*\([^\\ \t]\+\s*\\\)\s*$#\1 \2 \3#'
-e 's#^\([A-Z0-9a-z_]\+\)\s*\([?:+]\?=\)\(\s*\\\)#\1 \2\3#'
Brief explanation of this command:
^\([A-Z0-9a-z_]\+\) a regular variable at the beginning of the line
\([?:+]\?=\) any assignment character =, :=, ?=, +=
\([^\\]\+\) any string not containing a line continuation
\([^\\ \t]\+\s*\\\) string, optional whitespace, followed by a
line continuation character
\(\s*\\\) optional whitespace, followed by a line
continuation character
Hence, the first subexpression handles empty assignments, the second
handles regular assignments, the third handles regular assignments with
line continuation, and the fourth empty assignments with line
continuation.
This expression was tested on following test text: (initial tab not
included)
FOO = spaces before
FOO = spaces before and after
FOO = tab before
FOO = tab and spaces before
FOO = tab after
FOO = tab and spaces after
FOO = spaces and tab after
FOO = \
FOO = bar \
FOO = bar space \
FOO = \
GENIMAGE_DEPENDENCIES = host-pkgconf libconfuse
FOO += spaces before
FOO ?= spaces before and after
FOO :=
FOO =
FOO =
FOO =
FOO =
$(MAKE1) CROSS_COMPILE=$(TARGET_CROSS) -C
AT91BOOTSTRAP3_DEFCONFIG = \
AXEL_DISABLE_I18N=--i18n=0
After this bulk change, following manual fixups were done:
- fix line continuation alignment in cegui06 and spice (the sed
expression leaves the number of whitespace between the value and line
continuation character intact, but the whitespace before that could have
changed, causing misalignment.
- qt5base was reverted, as this package uses extensive alignment which
actually makes the code more readable.
Finally, the end result was manually reviewed.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Cc: Yann E. Morin <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Perl modules can have three different types of dependencies:
- configure/build time dependency which becomes host dependency
- runtime dependency which becomes target dependency
- test time dependency which is useless in a cross-compiling context like BR
Before this patch, test time dependencies are handled like runtime
dependencies.
After this patch, test time dependencies are ignored by default. The
newly added -test option allows to add them anyway if needed.
[Thomas: reword commit log using Francois proposal.]
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fix#7280 [1]
When the FORCE option is passed to the set command, the variable is
added/updated in the CMake cache every single time CMake processes this
command.
Because the toolchainfile.cmake prepends architecture/toolchain flags
to the CMAKE_{C,CXX}_FLAGS, this makes the CFLAGS being updated in the
generated Makefiles each time one reconfigures its project. So it
forces the compilation of everything, even when nothing has changed.
[1] https://bugs.busybox.net/show_bug.cgi?id=7280
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Tested-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
(tested the SimpleApp reproduction scenario described in the bug report)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The linker flags are part of the toolchain configuration, so set them for
the CMake-based packages.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
mktemp --tmpdir is not available on older Redhat RHEL5 machines. The
alternative that has the same behavior is 'mktemp -t'.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The git helper uses gzip to compress the intermediate tarball. But gzip
removes the source file, and create a new file named by appending .gz to
the original file name.
Thus, we end up with output.gz, while the download wrapper expects jsut
output, and thus believes the downlaod failed.
Fix that by storing the tar from git to a temporary file, then pipe this
file to gzip's stdin, and redirect gzip's stdout to the output file.
Reported-by: Graham Newton <gnewton@peavey-eu.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This drastically simplifies the wget helper, as it no longer has to deal
with atomically saving the downloaded archive.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
(Tested by running 'make busybox-source')
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This drastically simplifies the svn helper, as it no longer has to deal
with atomically saving the downloaded archive.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
(Tested by running 'make open2300-source')
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This drastically simplifies the scp helper, as it no longer has to deal
with atomically saving the downloaded archive.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
(Tested by setting a primary site to 'scp://localhost:/tmp' and
running 'make vim-source')
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This drastically simplifies the hg helper, as it no longer has to deal
with atomically saving the downloaded archive.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
(Tested by running 'make vim-source')
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This drastically simplifies the git helper, as it no longer has to deal
with atomically saving the downloaded archive.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
(Tested by running 'make fmc-fsl-sdk-source')
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This drastically simplifies the cvs helper, as it no longer has to deal
with atomically saving the downloaded archive.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This drastically simplifies the localfiles helper, as it no longer has
to deal with atomically saving the downloaded archive.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
(Tested by setting BUSYBOX_SITE = file:///tmp and running 'make busybox-source')
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This drastically simplifies the bzr helper, as it no longer has to
deal with atomically saving the downloaded archive.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The download wrapper is responsible for ensuring the atomicity
of saving into $(BR2_DL_DIR).
It calls the appropriate download helper, telling it to save the
downloaded content to a temporary file in $(BUILD_DIR) (so it does
not clutter $(BR2_DL_DIR) with partial, failed downloads.
Then, only if the download helper was successful, does the wrapper
save the downloaded content to the final location, yet still in a
temporary file, and finally atomically renames it to the final output
file.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Alter the libtool 1.5.x support patch to accomodate for wildly different
versions of ltmain.sh
Just make it alter incoming args from -static to -all-static which seems
to apply to all the different variants out there since argument parsing
is unlikely to change much.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
After switching TARGET_LDFLAGS from --static to -static, one issue
appears: from the point of view of libtool, -static only means to link
statically against the 'uninstalled libtool libraries' (i.e the
libraries that libtool has built in the current package), but
otherwise links dynamically with the other libraries. To really get a
completely static build, you need to pass -all-static to
libtool. Unfortunately, -all-static is only a valid option for
libtool, not as a general LDFLAGS, so we cannot to TARGET_LDFLAGS =
-all-static without breaking virtually all packages.
As pointed out 10 years ago on the libtool mailing list, the current
naming of the options is very confusing and the source of issues, and
there was a proposal to change -static to have the behavior of
-all-static, and instead introduce a separate -lt-static to have the
current behavior of -static. But that never got merged, because it was
breaking the current behavior. See:
http://lists.gnu.org/archive/html/libtool/2004-11/msg00017.html
However, in Buildroot, when we pass -static, we really mean it, and we
want a completely static build. Therefore, this patch adapts our
ltmain.sh patches so that they alter the behavior of -static to make
it work like -all-static. The changes are small and quite easy to
understand, and have been tested to work fine with a small selection
of packages.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The gconv libraries are used to translate between different character sets
('charsets', even 'csets' sometimes). Some packages need them to present
text to the user (eg. XBMC Gotham).
In (e)glibc they are implemented by the internal implemenation of iconv,
called gconv, and are provided as dlopen-able libraries.
Note that some gconv modules need extra libraries (shared by more than
one gconv module), so we must, when adding a subset of modules, scan the
installed modules in search of the missing libraries.
[Thomas: add general explanation in expunge-gconv-modules and fix
coding style.]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Cc: Eric Limpens <limpens@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In English, unlike in French, almost all usages of the word 'information'
are uncountable, meaning that 'informations' is invalid.
This patch fixes this typo throughout the tree, except in CHANGES and
docs/news.html (historic text).
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When searching for virtual package providers, there's no need to
handle legacy symbols at all, so just bail out early.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Samuel Martin <s.martin49@gmail.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
No need to pass as argument to a function, members of the class it's in.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Samuel Martin <s.martin49@gmail.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- typo in comment
- remove trailing space in _HOST_DEPENCENCIES when no dependency
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit improves the scancpan script to automatically populate the
LICENSE_FILES variable using informations available in the Perl
package MANIFEST file.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Perl extensions are loaded at runtime with dlopen(), so it does not
make sense to even build extensions that are written in C when
BR2_PREFER_STATIC_LIB is enabled. A Perl module written in C or with a
dependency on a module written in C is not available when doing a
static build.
Therefore, this commit adapts the scancpan script to automatically
generate a dependency on !BR2_PREFER_STATIC_LIB when the Perl module
would not work in a static-only configuration.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When switching the git helper over to a shell script, a special case was
not carried over: in case the remote has the required reference, we
attempt a shallow clone, using --depth 1. However, this is not supported
when the remote is accessed with the http protocol.
Therefore, the download fails.
What happened before the conversion to a shell script was that the helper
in the Makefile would fallback to doing a full-clone.
This is the case and behaviour that were lost in the conversion.
To avoid making the script too complex, we only attempt a full clone if
needed. And we decide that a full clone is needed by default; we decide
it is unnecessary if the remote has the needed reference *and* the
shallow clone was successful.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
bzr uses the name of the extension of the output file to known what
output format to use: tar, tgz, tar.bz2... If no extension is
recognised, bzr will output to a directory.
Since we use 'mktemp .XXXXXX' to generate temporary files, it obviously
never ends with a recognised extension. Thus, bzr expects the output to
be a directory, and fails since it is a file.
Fix that by forcing the output format.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Although md5 is, for legacy reasons, a supported hash type,
it is not documented on purpose, since it is now known to
be weak.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Baruch Siach <baruch@tkos.co.il>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Samuel Martin <s.martin49@gmail.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some of the packages that Buildroot might build are sensitive packages,
related to security: openssl, dropbear, ca-certificates...
Some of those packages are downloaded over plain http, because there is
no way to get them over a secure channel, such as https.
In these dark times of pervasive surveillance, the potential for harm that
a tampered-with package could generate, we may want to check the integrity
of those sensitive packages.
So, each package may now provide a list of hashes for all files that needs
to be downloaded, and Buildroot will just fail if any downloaded file does
not match its known hash, in which case it is removed.
Hashes can be any of the md5, sha1 or sha2 variants, and will be checked
even if the file was pre-downloaded.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Baruch Siach <baruch@tkos.co.il>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
DL_DIR can be a very precious place for some users: they use it to store
all the downloaded archives to share across all their Buildroot (and
maybe non-Buildroot) builds.
We do not want to trash this location with our temporary downloads (e.g.
git, Hg, svn, cvs repository clones/checkouts, or wget, bzr tep tarballs).
Turns out that we already have some kind of scratchpad, the BUILD_DIR.
Although it is not really a disposable location, that's the best we have
so far.
Also, we create the temporary tarballs with mktemp using the final tarball,
as template, since we want the temporary to be on the same filesystem as
the final location, so the 'mv' is just a plain, atomic rename(2), and we
are not left with a half-copied file as the final location.
Using mktemp ensures all temp file names are unique, so it allows for
parallel downloads from different build dirs at the same time, without
cloberring each downloads.
Note: we're using neither ${TMP} nor ${TMPDIR} since they are shared
locations, sometime with little place (eg. tmpfs), and some of the
repositories we clone/checkout can be very big.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Samuel Martin <s.martin49@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Tested-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
[tested a particular scenario that used to fail: two separate builds
using a shared DL_DIR, ccache enabled, so that they run almost
synchronously. These would download the same file at the same time,
corrupting each other. With the patches in this series, all works
fine.]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Maintaining the download helpers in the Makefile has proved to be a bit
complex, so move it to a shell script.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Maintaining the download helpers in the Makefile has proved to be a bit
complex, so move it to a shell script.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Maintaining the download helpers in the Makefile has proved to be a bit
complex, so move it to a shell script.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Maintaining the download helpers in the Makefile has proved to be a bit
complex, so move it to a shell script.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Maintaining the download helpers in the Makefile has proved to be a bit
complex, so move it to a shell script.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Tested-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
[tested a particular scenario that used to fail, when the 'hg archive'
step is interrupted, now working fine]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Maintaining the download helpers in the Makefile has proved to be a bit
complex, so move it to a shell script.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Maintaining the download helpers in the Makefile has proved to be a bit
complex, so move it to a shell script.
[Peter: redirect pushd/popd output to /dev/null]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: Ryan Barnett <ryan.barnett@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The git download helper is getting a bit more complex. Fixing it in the
Makefile when it breaks (like the recent breakage with a non-existing
sha1-cset) proves to be challenging, to say the least.
Move it into a shell script in support/download/git, which will make
it much easier to read, maintain, fix and enhance in the future.
[Peter: redirect pushd/popd output to /dev/null]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- remove trailing space after perl when it's the only dependency
- license: substitution of perl name by BR name
- add a tabulation before source
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch is the result of 2to3.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It hides any error messages reported by make.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Tested-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The graph-depends script calls make. If the outer make was called
recursively, or if it was called with '-C <somedir>', then the
environment will contain "MAKEFLAGS=w --". Therefore, the recursive
make prints 'Entering' and 'Leaving' messages, which clobbers the
output for dot.
To avoid this, add "--no-print-directory" to the recursive make
arguments. Since we require GNU make 3.81, we can be sure that this
option is available.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch is the result of 2to3.
In addition, universal_newlines=True is added to the Popen calls. In
python3, this makes sure that the output is decoded so that we get a
string instead of a buffer object.
Cc: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove the specific check that was done in dependencies.sh to use the
generic one that were introduced by the previous patch.
Also, introduce, BR2_NEEDS_HOST_JAVAC and BR2_NEEDS_HOST_JAR as it is
needed by classpath.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Avoid copy/pasting the same block of code to check if a program is
available on the host machine.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The transitive dependencies make the graphs barely readable for large
configs, with a large number of packages.
So, just switch to not drawing the transitive dependencies by default.
By popular demand... ;-)
[Peter: reword]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc; Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, the symlinks in the generated filesystems will have the
UID of the user running the build, because 'chown' does not change
the ownership of symlinks, by default.
Although the implications are limited, some may not want that UID
to leak in the generated filesystems.
So, use 'chown -h' so even symlinks get properly chowned.
Reported-by: Angelo Dureghello <angelo@barix.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Generate an asciidoc table that can be included in the manual, that
lists the existing virtual packages, the corresponding symbols, and
their providers (and sub-options thereof).
The core of this change is the addition of a new formatter for virtual
packages. This formatter is a bit tricky, as it has to catter for a
bunch of corner cases:
- provider is not a package, but is sub-options of a package
- such a sub-option may be itself 'select'-ed by one or more
other sub-options
- legacy packages should not be considered as a provider
Those cases are real:
- sub-options of mesa3d provide EGL or GLES
- selected sub-options of mesa3d provide GL
- udev is a legacy package, but it provides udev
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, we can generate two different tables of packages:
- a single-column table with the symbols' prompts,
- a two-column table with the symbols' prompts and locations in the
menuconfig.
For virtual packages, this is not enough, since we will have to display
more columns, with different content:
- the virtual package name (but such symbols do not have a prompt)
- the symbol name
- the providers for the virtual package
So, instead of having a single function that knows how to generate any
table, introduce a formatter function that is passed as argument to,
and called by format_asciidoc_table(). Such formatter functions are
responsible for providing:
- the layout of the table (number of columns, column arrangement),
- the formatted header line,
- a formatted line for a symbol.
What the formatter should ouput depends on its arguments:
- if none are passed, the layout is returned,
- if the header label is passed, it returns the formatted header line,
- otherwise, it returns the formatted line for a symbol.
Two formatter functions are introduced in this changeset, to replace the
current 'sub_menu' feature:
- _format_symbol_prompt() to display a one-column table with only the
symbols' prompts,
- _format_symbol_prompt_location() to display a two-column table with
the symbols' prompts and locations.
This will help us to later introduce a new formatter to generate a table
for virtual packages.
[Thanks to Samuel for his pythonistic help!]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When generating the package lists, the responsibility to decide what is
actually a package symbol is currently split between the _is_package(),
the get_symbol_subset() and the format_asciidoc_table() functions.
The two latter functions check that an item is really a symbol, and that
is has a prompt.
While this is currently correct for real packages, this will no longer
be the case when we also generate a list of virtual packages, since they
do not have a prompt.
Move the responsibility to verify that a symbol is indeed a package symbol
to _is_package(), so it's all in one place, and makes it easier to change
for virtual packages.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
If a package has both a 'real' and a 'virtual' definition, consider it
is a virtual package and do not display it in the generated package list.
This is the case for jpeg and cryptodev, that are virtual packages, but
also real (but empty) packages used to provide a prompt to enable/disable
a choice to select an implementation. In this case, we do not want to
list the virtual packages, but only their implementations.
So, consider packages that are both real and virtual as virtual packages.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Samuel Martin <s.martin49@gmail.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Prepare to tell apart real packages from virtual packages.
Currently, the code implicitly recognises only real packages, and
discards virtual packages, because of the heuristic used to recognise
whether a symbol is a package:
- for real package:
- symbols : BR2_PACKAGE_FOO
- .mk files: foo.mk
- for virtual packages:
- symbols : BR2_PACKAGE_HAS_FOO
- .mk files: foo.mk
The current heuristic is to check for each symbol if a corresponding .mk
file exists, by stripping 'BR2_PACKAGE_' from the beginning of the symbol,
converting the result to lowercase, and checking if a .mk file exists.
So, as a side effect, it completely misses the virtual packages [*], which
is pretty nice since we get a list with only real packages that the user
can indeed select and see in the menuconfig.
[*] Except for 'cryptodev' and 'jpeg' which are both virtual packages and
normal packages. Except they are not normal packages, they are used to
display a choice of the implementation to use. This case will be fixed in
follow-up patches.
Since we'll soon need to also output the table of virtual packages, we
need to teach the _is_package() function to recognise them as well.
This patch is the first step into that direction: it introduces a new
function _is_real_package() that is just a wrapper to _is_package(), which
gains a new parameter, being the type of packages to filter on.
No behavioural change is made in this patch, it is just a preparatory
patch.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Samuel Martin <s.martin49@gmail.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Move to a function the code generating the package name from a
symbol's name, to avoid code duplication.
This is not used currently, but will be in a subsequent patch.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Samuel Martin <s.martin49@gmail.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is ugly, since Python does not have enum constructs, so by moving
the 'type' of the constant ('MODE' here) to the beginning, we get an
artificial 'namespace' for the constants.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Although unnecessary (we already have initialisation via the parser),
initialise the 'transitive' option, and document it at the same time.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add some comment as well, enhance help text.
[thanks to Samuel for the hints to make it even more pythonic]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Merge the redundant-dependencies elimination into the newly introduced
transitive-dependencies elimination.
This makes the code cleaner and much shorter, because:
- the ('all',pkg) redundant dependency is in fact a transitive
dependency, and we now have code to deal with that
- the (pkg,'toolchain') dependency is easy enough to deal with that
having a separate function for that is overkill
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, all the dependencies of a package are drawn on the dependency
graph, including transitive dependencies (e.g. A->B->C and A->C).
For very big graphs, with lots of packages with lots of dependencies, the
dependency graph can be very dense, and transitive dependencies are
cluttering the graph.
In some cases, only getting the "build-order" dependencies is enough (e.g.
to see what impact a package rebuild would have).
Add a new environment variable to disable drawing transitive dependencies.
Basically, it would turn this graph:
pkg1 ---> pkg2 ---> pkg3 -------------------.
|\__________/ \ \
|\____________________ \ \
| \ \ \
`-> pkg4 ---> pkg5 ---> pkg6 ---> pkg7 ---> pkg8
\__________/
into that graph:
pkg1 ---> pkg2 ---> pkg3 -----------.
| \
`-> pkg4 ---> pkg5 ---> pkg6 ---> pkg7 ---> pkg8
[Thanks to Samuel for the parser hints]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Do not use the same colors for toolchain, host and target packages.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
[yann.morin.1998@free.fr rephrase commit log]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch updates the generated toolchainfile.cmake to use ccache.
When toolchainfile.cmake is used inside Buildroot, using ccache during
the build is driven by a CMake knob: USE_CCACHE, automatically set by
the cmake-package infrastructure and reflecting the BR2_CCACHE value.
Since this toolchainefile.cmake file can be used outside Buildroot, and
this file also set a couple of things (among these: the sysroot cflag,
some pkg-config environment variables), it is important to set the
compiler variables as well to keep the consistency of the
cross-compilation configuration.
So, when it is used outside Buildroot, using ccache for the build is
driven by the ccache program availability.
Note that using ccache for the build is achieved by setting the *_ARG1
CMake variables to let CMake use ccache without failing in detecting
the compiler.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The patch allows sharing or moving the toolchains.
This is a step toward making the toolchain/sdk relocatable.
Closes#6818
[Peter: reword comment as suggested by Thomas]
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Cc: Uwe Strempel <u.strempel@googlemail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch introduces a toolchainfile.cmake.in template which is filled
by Buildroot.
Using a toolchainfile.cmake.in template file allows to avoid overloading
quoting and/or escaping and it becomes much more similar to the
resulting file.
This patch also cleans up the quoting style.
[Peter: drop stdin redirect as suggested by Thomas]
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
If bsdtar is installed, fix script error for tar version detection.
bsdtar does not provide all expected command line (long) options
like "--hard-dereference". To ensure compatibility, mark version
of tar as 'invalid' and trigger build of 'host-tar'.
[Peter; slightly reworded commit text]
Signed-off-by: Heiko Abraham <abrahamh@web.de>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
in order to avoid spurious diff when updating packages
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Remove some spaces before tabs and add the empty line at end of file.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Cc: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The current check is broken, as it only checks if the user's login
shell is bash, not what the system shell is.
Mimick the sequence found in the top-level Makefile to search for
bash, except for the fallback case, where we explicitly check that
'sh' is bash, by checking if it sets $BASH, so we know the fallback
case, in the top-level Makefile, to use 'sh' will indeed use bash.
Remove superfluous semi-colons ';' at the end of lines, they are
not needed in a shell script (this is not C!)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Cc: Andrew Barnes <andy@outsideglobe.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As Samuel said:
In Python, None is a singleton, and it is recommended to use "is" or
"is not" for testing them [1].
[1] http://legacy.python.org/dev/peps/pep-0008/#programming-recommendations
Reported-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some magic numbers obtained with trial-and-error and successive
iterations, to eventually get a nice graph.
[Thomas: remove excessive spaces in expressions.]
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Al packages depend on 'toolchain'. Currently, 'graph-depends' graphs this
dependency. The resulting graph is thus cluttered with less-than-useful
information.
Instead, do not graph the 'toolchain' dependency for any package, save
for the fake 'all' package. The graph is now a bit more readable.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, the complete dependency chain of a package is used to
generate the dependency graph. When this dependency chain is long,
the generated graph becomes almost unreadable.
However, it is often sufficient to get the first few levels of
dependency of a package.
Add a new variable BR2_GRAPH_DEPTH, that the user can set to limit
the depth of the dependency list.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, we are using a crude, ad-hoc parsing of argv[].
This is a limiting factor to adding new options.
Use argparse instead, and introduce a single argument for now:
--package, -p PACKAGE
In the (near) future, we'll be able to add more option arguments,
such as depth-limiting for big graphs.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Old toolchains, with old gcc that do not support -print-sysroot, break the
kernel-headers version check script: it fails to find the sysroot of the
toolchain, and thus ends up including the host's linux/version.h.
Most of the time, this will break early, since the host's kernel headers
will not match the toolchain settings.
But it can happen that the check is succesful, although the configuration
of the toolchain is wrong:
- the custom toolchain has kernel headers vX.Y
- the user selected vX.Z (Z!=Y)
- the host has headers vX.Y
In this case, the check passes OK, but the build of some packages later on
will break (which is exactly what those _AT_LEAST_XXX options were added to
avoid).
Fix that by passing the sysroot to the check script, instead of the cross
compiler.
We get the sysroot as thus:
- for custom toolchains, we use the macro toolchain_find_sysroot. We can
do that, because we already have a complete sysroot with libc.a at that
time.
- for internal toolchain using a custom kernel headers version, we just
use $(STAGING_DIR). We can't use the macro as for custom toolchains
above, because at the time we install the kernel headers, we do not yet
have a complete sysroot with a libc.a. But we can just use
$(STAGING_DIR), since we're only interested in the kernel headers.
For all other types of toolchains, we already have the _AT_LEAST_XXX options
properly set, so we need not add a check in this case.
Fixes:
http://autobuild.buildroot.net/results/f33/f331a6eff0b0b93c73af52db3a6b43e4e598577e/http://autobuild.buildroot.net/results/a57/a5797c025bec50c10efdcff74945aab4021d05e4/
[...]
[Thanks to Thomas for pointing out the toolchain_find_sysroot macro!]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Instead of creating a temporary files with a dubious scheme, use mktemp,
which purpose is exactly that: creating temporary files
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since we introduced the _AT_LEAST_XXX for the kernel headers, people
using pre-built custom toolchain now have to specify the version of
the kernel headers their custom toolchain uses.
So, when we detect that there is a mismatch between the selection in
the menuconfig, and the actual version of the headers, we currently
only bail out with a terse message "Incorrect selection of kernel
headers".
This could be confusing some, and getting the version of the headers
used by the toolchain is not trivial (well, it's very easy, but not
trivial.)
This patch changes the way we report the error by moving the message
into the test-code, and by printing the expected and actual versions
of the kernel headers.
BUT! To get this pretty error message, we need to run the
test-program, so we can not use the cross-toolchain, we have to use
the native one.
BUT! The native one has its own linux/version.h header, so we can not
simply include it.
So, we ask the cross-compiler where its default sysroot is, and use
that to then force-feed the cross linux/version.h to the native
toolchain.
[Thomas: augment commit log with a message provided by Yann, fix
coding style to not have spaces after opening parenthesis and before
closing parenthesis, reformatted the message "Incorrect selection..."
to make it fit on one line.]
Reported-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When adding a new user (or a new group), we would get warnings, like:
[...]/support/scripts/mkusers: line 145: [: too many arguments
This is because we're checking if a UID (or a GID) is already defined,
and/or is different from the requested one, both checks in the same
test.
Of course, if a UID (or a GID) is not defined, it does not have a value,
so we can not compare it to an integer.
Fix that by splitting the test in two, so the second is only executed if
the first is sucessful.
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This fixes the spurious "[: too many arguments" errors from mkusers.
Signed-off-by: Philip Paeps <philip@paeps.cx>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Ensure the kernel headers version used in the custom external toolchain,
or the manually-specified kernel headers version, matches exactly the one
selected by the user.
We do not care about the patch-level, since headers are not supposed to
change between patchlevels. This applies only to kernels >= 3.0, but
those are actually the ones we do care about; we treat all 2.6.x kernels
as being a single version, since we do not support any 2.6 kernels for
packages with kernel-dependant features.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
