In preparation for more graph-depends improvements, use a
TARGET_EXCEPTIONS list to list all the targets that should be ignored
while building the dependency graph.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When doing a full graph of the dependencies, graph-depends starts by
doing a "make show-targets", which lists all the packages registered
in the $(TARGETS) variable. This variable contains all packages that
are enabled according to the .config file. Then, for each of those
packages, we used to create a "all" -> "package" dependency, even if
in fact most of some packages are already dependencies of other
packages. This creates a needlessly complex dependency graph.
This patch modifies graph-depends so that it filters out the unneeded
"all" -> "package" dependencies when "package" is already the
dependency of another package.
For example, if you have a configuration with libpng (which selects
zlib), "make show-targets" displays "libpng zlib", so graph-depends
used to create the following dependencies: (all -> libpng, all ->
zlib, libpng -> zlib). However, the (all -> zlib) dependency is not
really needed, as zlib is already the dependency of libpng. Those
dependencies are now filtered out.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
At the top of the output html page there is a dangling "results" link.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
graph-depends calls make to get the list of packages, and the
dependencies of each package.
When called out-of-tree, the Makefile is a wrapper that calls
the real Makefile, so make will spit out a line like:
make -C /path/to/buildroot O=/path/to/build-dir show-targets
which graph-depends wrongly believes is part of the target list.
Be silent when calling make, as we really only want the target
and dependency lists.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since on some packages we are adding <pkg>_LICENSE but not necessarily
<pkg>_LICENSE_FILES, let's add a separate statistic to track these
informations. This will allow us to improve both the number of
packages covered by <pkg>_LICENSE and <pkg>_LICENSE_FILES.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For alignement reasons, we sometimes add spaces between <pkg>_LICENSE
and the equal sign. Take this into account in pkg-stats.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that most packages have been converted over to package
infrastructures, keep only one column to show the package
infrastructures.
A new column, showing of the package has license information, has been
added. This will help in increasing the number of packages having
license metadata.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With the introduction of a specific macro for host targets, it was decided
to also make the names of the macros more intuitive: generic-package,
autotools-package and cmake-package.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Create host-generic-package, host-autotools-package and
host-cmake-package macros. Such a macro is more intuitive to use than
the $(call ...,host) construct. Also it speeds things up by having
one less $(call ...) evaluation.
Also includes documentation update, but not for buildroot.html.
This brings the time for 'make -qp' (which is used by bash-completion)
down from 1.85s to 1.35s on my laptop.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The patch pattern was expanded before being into the patch directory so the
expansion can add incorrect files.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Recursivity is needed with some tarballs containing debian patches:
.
debian
changelog
control
patches
02-COPYRIGHT.patch
[...]
Since we can find some files which are not patches in those directories, only
consider .patch* and .diff* files as valid patches.
Due to recursivity, strip-components option is no more necessary so it has
been removed.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
If a series file is present use it to determine the proper order to apply
patches instead of using ls sorting order.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Tested-by: Ludovic Desroches <ludovic.desroches@atmel.com>
add a series file with a wrong patch order into an archive containing several
patches whose correct order is the alphabetical one
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The way archives were managed was incorrect because the uncompressed archives
were sent directly to the patch command. It means that alphabetical patch
order was not respected.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Tested-by: Ludovic Desroches <ludovic.desroches@atmel.com>
with an armadeus_apf9328_defconfig build
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When a directory is found in patchdir, it is skipped.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Tested-by: Ludovic Desroches <ludovic.desroches@atmel.com>
with an armadeus_apf9328_defconfig build
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
targetdir is not the output/target directory as it can suggest.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Tested-by: Ludovic Desroches <ludovic.desroches@atmel.com>
with an armadeus_apf9328_defconfig build
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: .rej files might be in subdirs, so just do find .. | xargs rm]
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Tested-by: Ludovic Desroches <ludovic.desroches@atmel.com>
with an armadeus_apf9328_defconfig build
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The "Patch count" cell needs rowspan=2, otherwise the host/target cells are
misaligned.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The variable convert_to_autotools is not used in the script. The correct
variables are convert_to_target_autotools and convert_to_host_autotools.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The package count, cnt, should start with an initial value of 0. It
is incremented as each package *.mk file is checked. Starting with a
value of 1 makes the first ID = 2 and results in the TOTAL being off
by 1.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Update the grep tests used to determine the package type.
The package name and directory are now worked out magically due to:
package: add helper functions to get package name and directory magically
Because of this the extra arguments were removed by patches:
package: remove useless arguments from GENTARGETS
package: remove useless arguments from AUTOTARGETS
package: remove useless arguments from CMAKETARGETS
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The CONFIG_UPDATE macro is no longer defined in
package/gnuconfig/gnuconfig.mk, but instead in
package/Makefile.autotools.in. It it also changed a little bit to take
the directory of the package sources as argument, and the AUTOTARGETS
infrastructure is updated to use this macro.
[Peter: drop echo in CONFIG_UPDATE]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The name "patch-kernel.sh" is a bit stupid, since this script is used
to patch everything in Buildroot, not only kernel trees.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
