Currently, the Xtensa architecture uses the "snapshot" version of
uClibc. This means that the build is not reproducible, since it will
pick whatever latest version of uClibc is available at the moment of
the build.
This commit replaces that by adding a special Xtensa version, which
points to a well-known Git commit. This is something we should
hopefully be able to remove once the uClibc people realize that doing
a 0.9.34 release would be useful.
Should probably fix:
http://autobuild.buildroot.org/results/5d6/5d6072a038acf894d832704e36c1d43f0254abf5/build-end.log
at least I wasn't able to reproduce the build problem.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[baruch: use a more recent uClibc version]
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When BR2_TARGET_GRUB_SPLASH is enabled, we were passing
--enable-graphics, but when it was disabled, we were not doing
anything. However, in Grub, graphics support is enabled by default,
and you have to pass --disable-graphics to disable it.
Fix this by passing --enable-graphics or --disable-graphics as
appropriate.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
The fs/iso9660 logic assumes that the Grub bootloader is
used. Therefore, it should make sure that Grub is configured with the
support for the ISO9660 filesystem.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
In 1cece2813b (grub: add option to
configure the list of supported filesystems), we introduced the
BR2_TARGET_GRUB_FS_SUPPORT option which allows to provide a
space-separated list of filesystems that Grub should support.
However, it turns out that this not very practical, because the
iso9660 filesystem logic in Buildroot should force the ISO9660 support
to be enabled in Grub, which is not easy to do with a string option.
Therefore, this patch changes this option from a string option to a
list of boolean option, one per filesystem supported.
A few useful details:
- Since Grub legacy is dead, the list of filesystem, and therefore
the number of options, will not grow.
- We have only added options for filesystems that are likely to be
used in an embedded Linux context. Filesystems such as VSTAfs,
Minix, UFS2 or FFS2 are not supported.
- There is no need to add some Config.in.legacy support for the
previous option, since it was added after Buildroot 2013.11, and
was therefore never part of an official Buildroot release.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
In preparation to a change to the configuration options of the
supported filesystem in Grub, enclose the network driver options in a
sub-menu.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
The ISO9660-specific Grub menu.lst contains two entries: one entry to
chainload the bootloader available in the first hard drive, and
another entry to boot the Buildroot system.
However, it defaults to booting the first entry, i.e chainloading
what's on the first hard drive. For a Buildroot generated system, this
is quite odd: we're not even booting the system built by Buildroot.
So, switch the two entries, and put the Buildroot boot entry first.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
PDF files can not be easily embedded in other documents (eg. ODT, or HTML).
Add support for generating PNG graphs, by setting the GRAPH_OUT=pdf|png on
the command line:
make GRAPH_OUT=png graph-build graph-depends
The default is still to generate PDF graphs.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Generate the graph of the complete dependency tree by calling:
make graph-depends
It's also possible to generate the graph-depends for a single package:
make PKG-graph-depends
The graphs are generated in $(O)/graphs/
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Generate the build-time graphs by calling:
make graph-build
This generates the graphs in $(O)/graphs/
It is possible to use the alternate color-scheme by setting the variable
GRAPH_ALT=1 on the command line:
make GRAPH_ALT=1 graph-build
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This script generates graphs of packages build time, from the timing
data generated by Buildroot in the $(O)/build-time.log file.
Example usage:
./support/scripts/graph-build-time \
--type=histogram --input=$(O)/build-time.log --output=foobar.pdf
Three graph types are available :
* histogram, which creates an histogram of the build time for each
package, decomposed by each step (extract, patch, configure,
etc.). The order in which the packages are shown is
configurable: by package name, by build order, or by duration
order. See the --order option.
* pie-packages, which creates a pie chart of the build time of
each package (without decomposition in steps). Packages that
contributed to less than 1% of the overall build time are all
grouped together in an "Other" entry.
* pie-steps, which creates a pie chart of the time spent globally
on each step (extract, patch, configure, etc...)
The default is to generate an histogram ordered by package name.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[yann.morin.1998@free.fr: adapt to the format of the step-hooks build-time.log,
add sort order by name, default to name-ordered histogram, use our colours
for pie-charts, add alternate color-scheme, add short-options, add
--input/-i]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- use the autotools-package infrastructure, since the package uses an
autoconf configure script.
- remove uninstall and clean commands since those are no longer
supported by Buildroot.
- rewrap the help text.
- order alphabetically the package in package/Config.in]
Signed-off-by: Lucas De Marchi <lucas.de.marchi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- remove empty newline at the end of Config.in
- use lowercase for the package name in the comment header
- reword the comment explaining why autoreconf is needed
- add optional dependency on libftdi, which avrdude can use
- remove avrdude.conf.bak file from /etc]
Signed-off-by: Wojciech M. Zabolotny <wzab01@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch update the patch for kernel's kconfig to add remaining
'kernel' mention.
It also applies this patch to buildroot's kconfig.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Only minor changes are registered, mainly help text.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since some time, we have removed the support to build a toolchain for
the target, and therefore the support for several development tools on
the target.
This commit deprecates a few additional development tools: m4, bison,
flex and gob2. For flex, we retain the ability to build libfl, we only
deprecated the ability to build the flex binary itself.
The original motivation for this patch is that m4 is causing build
issues in some configurations, but there isn't really much incentive
to fix this package for the target, since it is not really useful for
embedded Linux systems.
Bison, Flex and Gob2 are deprecated because they are reverse
dependencies of m4.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Fatih Aşıcı <fatih.asici@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Changes snmp++v3.3.2
====================
- Fixed: Regression through [APP-19] which lead to too long timeouts
on systems with clock_gettime.
- Fixed: Restored missing files (CHANGES, READMEs) to distribution.
- Fixed: Fixed compilation error when using poll syscall.
- Fixed: Do not use _vscprintf as it is not portable, instead just
truncate the log message.
- Fixed: Fixed test that produced an error during configure:
checking which _XOPEN_SOURCE macro must be defined...
./configure: line 6229: test: : integer expression expected
- Fixed: msec.cpp: timezone is a struct and not a class.
Changes snmp++v3.3.1
====================
- Fixed: Replaced strcasecmp usage in consoleExamples by _stricmp
for WIN32 platform.
- Improved: Debug output buffer length is now computed exactly on
WIN32.
- Fixed: Compilation of IPv6Utility.h with Visual Studio 2013.
- Fixed: Removed #define of Uint32 in eventlistholder.h.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add c-ares library from bug #6482.
Most of the credit goes to Gennady Proskurin <gpq@mail.ru>
[Thomas: fix comment explaining why we need autoreconf.]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, we do not include .config for all '%_defconfig' targets, but
we forgot to also exclude plain 'defconfig'.
Reported-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit improves the cross-compilation patches we have on top of
Python, to fix the problem of host library paths leaking into the
build of target modules, as seen at:
http://autobuild.buildroot.org/results/fcc/fccd7e08cd9d4713eb4208097dd48c5ab25749bc/build-end.loghttp://autobuild.buildroot.org/results/0bd/0bda780bf4b759b12edec26ac20b88cde617db4d/build-end.log
To do so, it ensures that the right python2.7/config/Makefile is used
when building target modules, and adjusts at runtime the paths read
from this Makefile if we are cross-compiling.
In addition, it installs the pgen program into the host directory, and
points the target python build to use python and pgen from $(HOST_DIR)
instead of from the host python source directory, which looks cleaner.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, the ARM Config.in logic specifies values for
--with-arch/-march and --with-tune/-mtune, but not for
--with-cpu/-mcpu. However, this causes problems on ARMv4, because
specifying --with-arch=armv4t isn't enough to make gcc generate ARMv4
code: one should also pass --with-cpu=<some ARMv4 CPU>.
Moreover, since Buildroot is generally designed to generate code
specifically for the configured target, it makes sense to give our own
--with-cpu/-mcpu value instead of relying on the default value used by
gcc, and only do small optimizations with -mtune.
Reported-by: Adam Hussein <kryme76@yahoo.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
The bluez_utils package requires shared library support unconditionally.
We can't fix it to make it build on static because, for instance,
"plugin.c" file uses dlfcn and it's a basic prereq for bluetoothd, so
add "depend on !BR2_PREFER_STATIC_LIB" to it and recursively to all
packages that selects BR2_PACKAGE_BLUEZ_UTILS.
Fixes:
http://autobuild.buildroot.net/results/d81/d81970024649c1e89c01da491c63760afdad6cb6/
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
aiccu uses the dn_skipname() function, which was only introduced in
uClibc 0.9.33. Therefore, we disable this package when uClibc 0.9.31
and 0.9.32. Most likely, only AVR32 users will be affected by this, so
we don't add a specific kconfig comment for that.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
The old and new URLs are equivalent, but the new URL is not specific
to an older version of libmpd, which seems more logical.
[Thomas: update commit log.]
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Database backends need threads even if sqlite does not.
The mysql client libs need them too but include them in the exclusion
closure anyway to state it very clearly. Fixes:
http://autobuild.buildroot.net/results/1ce/1cece0db309dfe5cecc69e88b02428615ed87316/
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes a couple of runtime regressions from the 1.10.4 security release.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also switch to github helper and install sample configuration file mode
600 - o+r is really bad for password-bearing configuration files.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
