Make the selection of a snapshot version a normal gcc version choice,
and make sure BR2_GCC_VERSION is properly defined.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove references to BR2_EXT_GCC_VERSION_* configuration options, and
only allows special avr32 gcc versions on the AVR32 architecture.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* Add a new 0.9.30-avr32-2.1.5 version of uClibc in Config.in
* Add a patch for 0.9.20-avr32-2.1.5
* Select a different UCLIBC_SITE for avr32 versions in uclibc.mk
* Add the LINKRELAX=y configuration option to the uClibc .config file
in uclibc.mk
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* Add a new gdb version for AVR32 in Config.in
* Use a special mirror for this gdb version in gdb.mk
* Do not try to apply patches when the patch directory does not exist
in gdb.mk
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* Add new gcc version 4.2.2-avr32-2.1.5 in Config.in
* Select the Atmel mirror to download gcc with avr32 in their version
name, in gcc-uclibc-*.mk
* Do not apply patches if the patch directory is empty, in
gcc-uclibc-*.mk
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* Add a new binutils version 2.18-avr32-1.0.1 to the Config.in
* Use a different site to download avr32 binutils version in binutils.mk
* Only apply patches from the patch directory if it exists in
binutils.mk
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Closes#751.
Make kernel headers snapshot more user friendly by making it more obvious
that it's about using a local kernel snapshot, and error out with a sensible
error message if the option is enabled but no linux-2.6.tar.bz2 is present
in DL_DIR, rather than trying to fetch it from kernel.org.
Furthermore fix the bug where it tried to use linux-2.6..tar.bz2 instead of
linux-2.6.tar.bz2.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#597
Ensure that binutils-target runs after busybox if enabled, so it can
overwrite the busybox symlink for ar if that applet is enabled.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Reported by Julien Boibessot <julien.boibessot@free.fr>.
This somehow got disabled by cb815ae003 (two years ago!).
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Introduce BR2_PREFER_SOFT_FLOAT and enable it for arm, avr32 and mips,
and use it to enable soft float support by default for those archs.
This way people automatically get the correct floating point mode when
running make menuconfig for the first time (E.G. without a .config) and
changing the arch from i386 to arm/avr32/mips.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In a pristine checkout the -menuconfig targets need their build dirs
to exist.
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
We have been passing -q to ./configure when using 'make -s' for
packages using Makefile.autotools.in for some time. Do the same
for packages using autotools, but not using the
Makefile.autotools.in infrastructure, taking care to not do it
for packages with hand written configure scripts.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Reported by Andrew Dyer <amdyer@gmail.com> and
Lionel Landwerlin <lionel.landwerlin@openwide.fr>.
Seems like make 3.80 has problems with our Makefile.autotools.in
infrastructure.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Commit af2390c0f4 overlooked some
old comment fragments.
Signed-off-by: Michael Roth <mroth@nessie.de>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Defaulted to yes, but blocked it from gcc 4.4.x since the disable was
originally added because of problems with its c++ support reportedly.
Signed-off-by: Austin Foxley <austinf@cetoncorp.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
To reflect the new output directory hierachy rename the Makefile variable
TOOL_BUILD_DIR to TOOLCHAIN_DIR.
Signed-off-by: Michael Roth <mroth@nessie.de>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The "project" feature was designed to allow to several projects to be
built inside the same Buildroot source tree and allowing the toolchain
and non-configurable packages to be shared between the different
projects on the same architecture. While being interesting in theory,
this feature adds a level of complexity to Buildroot, both from an
user perspective and from a developer perspective, while one of the
main Buildroot strengh is to be simple. Moreover, this feature is only
seldomly used by our users.
From a user-level perspective, this for example allows to remove the
project_build_ARCH directory, which was very confusing. The
autotools-stamps directory is also removed, since these stamps are
back at their normal location.
Description of the changes involved :
* project/, directory removed
* Makefile
- Don't include project/Makefile.in and project/project.mk anymore
- Grab a copy of the contents of project/Makefile.in at the
location it was imported, but remove the definition related to
PROJECT_BUILD_DIR. The TARGET_DIR is now in
$(BUILD_DIR)/target_dir
- Remove the creation/removal of the $(PROJECT_BUILD_DIR) and
$(PROJECT_BUILD_DIR)/autotools-stamps directories
- Don't make world depends on target-host-info. This target was
defined by project/project.mk to customize /etc/issue,
/etc/hostname and create /etc/br-version depending on the
project definitions. We can of course imagine re-adding such a
feature later.
- Replace PROJECT_BUILD_DIR by BUILD_DIR everywhere
- Remove the update, log and lognr.$(PROJECT) target, they were
specific to the project feature.
* package/Makefile.autotools.in
- Replace PROJECT_BUILD_DIR by BUILD_DIR for the location of the
configure cache
- Move the INSTALL_TARGET and HOOK_POST_INSTALL stamps to the same
directory as the other stamps (i.e, in the package directory).
* package/Makefile.in
- Replace PROJECT_BUILD_DIR by BUILD_DIR for the location of the
configure cache
* package/at/at.mk,
package/busybox/busybox.mk,
package/busybox/initramfs.mk,
package/customize/customize.mk,
package/linux-fusion/linux-fusion.mk,
package/ltp-testsuite/ltp-testsuite.mk,
package/nfs-utils/nfs-utils.mk,
target/cpio/cpioroot.mk,
target/cramfs/cramfs.mk,
target/device/Atmel/DataFlashBoot/DataflashBoot.mk,
target/device/Atmel/Makefile.in,
target/device/Atmel/at91bootstrap/at91bootstrap.mk,
target/device/KwikByte/Makefile.in,
target/ext2/ext2root.mk,
target/initramfs/initramfs.mk,
target/iso9660/iso9660.mk,
target/jffs2/jffs2root.mk,
target/linux/Makefile.in,
target/romfs/romfs.mk,
target/squashfs/squashfsroot.mk,
target/tar/tarroot.mk,
target/ubifs/ubifsroot.mk
- Replace PROJECT_BUILD_DIR by BUILD_DIR
* target/device/Config.in
- Do not include project/Config.in anymore
* target/linux/Makefile.in.advanced
- Replace PROJECT_BUILD_DIR by BUILD_DIR
- Store the stamps file in $(STAMP_DIR) instead of
$(PROJECT_BUILD_DIR)/autotools-stamps
* target/u-boot/Makefile.in
- Replace PROJECT_BUILD_DIR by BUILD_DIR
- Remove $(PROJECT) from the U-Boot target binary name
- Remove the insertion in the configuration of the project name as
the hostname
- The u-boot-autoscript target now generates
$(U_BOOT_AUTOSCRIPT).img instead of
$(U_BOOT_AUTOSCRIPT).$(PROJECT)
* toolchain/gcc/gcc-uclibc-3.x.mk
toolchain/gcc/gcc-uclibc-4.x.mk
- Move the stamps files to $(STAMP_DIR)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fix problem with dns resolv, by copying the libnss_dns.so to the rootfs.
Using glibc from external toolchain, name resolving does not work,
unless libnss_dns.so is available on the target.
Signed-off-by: Anders Darander <ad@datarespons.se>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
BR2_UCLIBC_PROGRAM_INVOCATION is a toolchain configuration option,
like BR2_INET_IPV6, BR2_INET_RPC, on which some packages
depend. Therefore, it should be handled like BR2_INET_IPV6 and
BR2_INET_RPC in order to work properly with external toolchains.
Since we move it out of toolchain/uClibc/Config.in into
toolchain/Config.in.2, we rename the option to BR2_PROGRAM_INVOCATION
(since BR2_INET_RPC and others don't have UCLIBC in their name).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Closes#421.
This patch cleans up and fixes some minor issues with the locale support
section of the toolchain menu.
1. uClibc requires wchar support if locales are enabled, make locale
support select wchar support.
2. Allow purging of locale information even if there is no locale
support in the C library. This cleans up after packages that
install things into /usr/share/locale on the target.
Signed-off-by: Will Newton <will.newton@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
getline() is a standard libc function with a different signature.
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As a minimal test to the external toolchain, check that $(TARGET_CC)
is actually an existing executable file. That way, if the user
misconfigures the toolchain path and/or prefix, a meaningful error
message will be shown.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Use $(Q) in external toolchain support so that the user can get the
full output by passing V=1 to make, and still get a nice and clean
output by default.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Obey the BR2_INSTALL_LIBSTDCPP configuration option to copy the C++
standard library to the target. Suggested by Lionel Landwerlin
<lionel.landwerlin@openwide.fr>.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Do not copy .so symbolic links to target when not needed. Only copy
.so.X symbolic links and the library itself.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Lionel Landwerlin <lionel.landwerlin@openwide.fr> reported that using
the external toolchain support when LANG=fr_FR.UTF-8 doesn't work,
since the messages printed by gcc -v are translated in another
language, defeating the grep ^Configured test.
Therefore, as per Lionel suggestion, we force LANG=C when calling
$(TARGET_CC) -v.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* Introduce documentation for each function of ext-tool.mk, and
document all parameters of the functions.
* Pass SYSROOT_DIR as argument to all functions that require it,
instead of computing it manually everywhere
* Use $(shell) instead of backquotes
* Check that the SYSROOT_DIR variable is not empty, which means that
the external toolchain doesn't support --sysroot. In that case,
bail out with a nice error message.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Instead of hardcoding the C library versions, just copy the version
available in $SYSROOT_DIR/lib.
Add a check on the ARM ABI configured in Buildroot with regard to the
ABI of the external toolchain provided.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
x86-64 stores libgcc_s / libstdc++ / libgcj under lib64 instead of lib,
so make sure that directory is searched as well for libraries to copy
to target.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This patch adds some checks on the external toolchains.
First, it checks that the C library selection is correct, by looking
if gcc is able to find the main C library file through the
-print-file-name option.
Then, it attempts to check if the Buildroot toolchain options match
the configuration of the toolchain :
* for glibc, it checks that IPv6, RPC, locales, wide-char, large file
support Buildroot options are enabled, since with glibc all these
features are always available (at least this is the assumption we
make) ;
* for uClibc, it checks the Buildroot options with the uClibc
configuration file in $SYSROOT_DIR/usr/include/bits/uClibc_config.h
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The current Buildroot works just well with sysrootable glibc
toolchains, using the external toolchain feature. The only thing that
needs to be customized is the set of libraries that must be compiled
to the target.
The following patch takes a simple approach to making it easier for
users to use glibc toolchains. It just adds a uClibc/glibc choice in
the external toolchain menu. Then, depending on that selection, the
configuration system will choose a sane default value for the library
files list.
The other advantage of having a uClibc/glibc choice is that in the
future, we'll be able to add checks verifying that the external
toolchain configuration matches the features selected in Buildroot (in
terms of IPv6, RPC, locales or large file support).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add BR2_ENABLE_LOCALE_PURGE / BR2_ENABLE_LOCALE_WHITELIST options to
remove unwanted locales from the target rootfs. Handy for stuff like
the gtk stack, which comes with ~25 MB locales.
Works similar to localepurge in Debian, E.G. you provide a white list
of wanted locales, and everything else is removed.
We add the wchar stuff at compile time using sed, so the default defconfig
works, the file hasn't seen any updates since it first got committed, and
there's no references to it in the tree.
that the options become visible just below
the config, instead of at bottom of screen
Create a more useful default as toolchain path.
Allow generation of a script which sets up
paths to a binary toolchain generated by buildroot.
"target/device/Atmel/arch-avre/kernel-headers-2.6.28.2"
Make sure BR2_KERNEL_HEADERS_PATCH_DIR is enabled for 2.6.28
Set
KERNEL_HEADERS_PATCH_DIR="target/device/Atmel/arch-avre/kernel-headers-2.6.28.2"
for Atmel AVR32 targets and "valka"
