Force Release otherwise libraries will be suffixed by _debug which will raise
unexpected build failures with packages that use gflags (e.g. rocksdb)
Fixes:
- http://autobuild.buildroot.org/results/3545774258babc3584f69e7d523efdf7fff1acb5
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When 4bcc344464 was applied, it was not
noticed that 96dc6701af (from another
contributor) had already been
applied. 4bcc344464 essentially did the
same thing as 96dc6701af, except it also
disable zstd support explicitly in the host-libarchive package.
Let's drop the part of 4bcc344464 that
duplicates 96dc6701af.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
zstd is available since version 3.3.3 and
26838cf5c1
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
lz4 is available since version 3.2.0 and
724f3f918e
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
libiio-sharp.dll.mdb is not installed since version 0.19.0 and
8b571969fa
Indeed, EXISTS "${LIBIIO_CS_DLL}.mdb" will always return false because
the file will not exist when cmake will create the makefiles.
Fixes:
- http://autobuild.buildroot.org/results/42ffbd07d0e998c75d1afde6a5db7d6418c10f45
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The CMakeLists.txt contains:
if(CPPREST_EXCLUDE_COMPRESSION)
if(NOT CPPREST_EXCLUDE_BROTLI)
message(FATAL_ERROR "Use of Brotli requires compression to be enabled")
endif()
libcpprestsdk requires openssl, so if the libopenssl provider is
chosen, it anyway pulls in zlib. But if libressl is used as a
provider, it doesn't pull in zlib, and building libcpprestsdk becomes
possible without zlib thanks to this patch.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Convert the hash file to using the two space format for hashes. The
has for the LICENSE file has been updated since version 6.0.4 now
includes DOS line endings (\r\n).
Signed-off-by: Ryan Barnett <ryanbarnett3@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Some people want to be able to inspect the current state of the build,
and report information about it, like:
- report the number of packages already built out of the total,
- list the packages being actually built (e.g. for TLPB)
- etc...
However, the location where a package is built is inherently an internal
detail, so expose that to the user in the output of show-info. We only
expose the location relative to the base directory (basically, either
output/ or the user-suppiled $(O)), so that show-info does not contain
local information (the output of show-info can be shared).
Interested parties will be able to poke in there to identify the stamp
files and deduce the package's state.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Vadim Kochan <vadim4j@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: eeppeliteloop@gmail.com
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Although most virtual packages do not install anything, some of them
do. For example, the virtual package 'toolchain' does tweak the musl
headers during a post staging hook.
So, it makes sense for "show-info" to report if a virtual package has
its target, staging and/or image installation steps enabled or not.
This commit changes show-info to report the type of install steps for
virtual packages too, which means for all packages.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Vadim Kochan <vadim4j@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: eeppeliteloop@gmail.com
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
By their very nature, host packages have no target, staging, or images
install steps; they have a single install step, that is always
performed.
As such, setting the corresponding _INSTALL_{TARGET,STAGING,IMAGES}
variables does not make sense for host packages.
However, people (and scripts) may get confused when they process the
output of printvars, e.g.:
$ make printvars VARS=HOST_LIBTOOL_INSTALL_TARGET
HOST_LIBTOOL_INSTALL_TARGET=YES
Only set those variables for target packages. There is no
corresponding variable for host packages, as they are always installed
(and only once).
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Vadim Kochan <vadim4j@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: eeppeliteloop@gmail.com
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
By their very nature, host packages have no target, staging, or
images install steps; they have a single install step, that is
always performed.
However, we currently report those three types of install, which
is misleading at best, and really incorrect.
If we were to report any install type for host package, that would
be a single one, and it would always be true.
So, do not report any install type for host packages, as it does
not make sense to report anything that is always true.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Vadim Kochan <vadim4j@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: eeppeliteloop@gmail.com
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
diff LICENSE:
-This software is Copyright (c) 2019 by mst - Matt S. Trout (cpan:MSTROUT) <mst@shadowcat.co.uk>.
+This software is Copyright (c) 2020 by mst - Matt S. Trout (cpan:MSTROUT) <mst@shadowcat.co.uk>.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When booting with 'console=<empty>' in the kernel command line (as e.g.
U-Boot does with silent flags in effect), opening /dev/console fails.
As per POSIX [0], when iany redirection fails, the shell running exec
shal exit in error. So, when 'console=<empty>' is specified.
/dev/console can't be opened, and the redirection fails, and /init is
killed.
That behaviour was fixed on the kernel side with commit 2bd3a997befc2
(Open /dev/console from rootfs), present since 2.6.34, released in May
2010, so any [dr]ecent kernel will have that fix.
Furthermore, busybox will fix things up anyway (in bb_sanitize_stdio()),
falling back to opening /dev/null if no console is availble. systemd
does a similar thing (in make_console_stdio()), and sysvinit again has
a similar approach (in console_init()).
The archealogy search turned up those relevant commits:
2011-08-04 10a130f91e initramfs/init: make sure that 0, 1, 2 fds are available
introduces the three exec redirections in initramfs
2011-09-06 3fac21ef8d cpio: fix boot with dynamic /dev
introduces the three exec redirections in cpio
2011-09-06 13a3afc536 fs/initramfs: refactor with fs/cpio
dropped the initramfs tweaks to reuse the cpio ones
2012-11-04 e1ebae700a fs/common: Create initial console device
introduces the /dev/console char,5,1 pseudo device creation in
cpio
2018-03-31 dec061adce fs/cpio: don't extend packages' permissions table
switched from the permission-table to a manual mknod to create
/dev/console
The redirections were added before we could guarantee there was a
/dev/console in the rootfs.
We're now guaranteed to have /dev/console in an initramfs, and any recent
kernel will automatically open /dev/console before spawning /init.
The three redirections are useless now, and cause harm under certain
conditions. Drop them.
[0] https://pubs.opengroup.org/onlinepubs/9699919799/utilities/V3_chap02.html#tag_18_20_01
Signed-off-by: Timo Ketola <timo.ketola@exertus.fi>
Cc: Peter Korsgaard <peter@korsgaard.com>
[yann.morin.1998@free.fr:
- extend commit log with the analysis done with Peter
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The reason why the external wireguard kernel module is not allowed with
kernel headers >= 5.6 is that wireguard is included in the upstream kernel
since 5.6 rather than some kind of (fixable) incompatibility issue. Adjust
the comment to make that clear.
While we're at it, drop the redundant !5.6 dependency on the kernel headers
dependency comment. If headers are older than 3.10, then they are also
older than 5.6, so the statement is redundant.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Drop !BR2_PACKAGE_PYTHON3 dependency as SConstruct requires
host-python3 since version 4.1.10 and:
8dd6d47557
- host-python-psutil is needed since 4.1.8 and
ff03811e31
- Drop unneeded host-python-typing dependency
- C++17 and so gcc 7 is required since 4.1.8 and
01d84b2565
- Set --disable-minimum-compiler-version-enforcement as mongodb enforces
gcc >= 8.2 since verson 4.1.8 and
9ac90b128e
- Explictly disable ssl if needed as ssl is enabled by default
- Add host-python-cheetah dependency if needed
- Manage new http-client option added in version 4.1.2 and
4d7dcca91b
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Titouan: Fix patch conflicts with master]
Signed-off-by: Titouan Christophe <titouan.christophe@railnova.eu>
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Needed to build mongodb.
With this host variant there is no need to enforce host
python in the original package.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since wireguard is built into kernels 5.6 and later we can't build
wireguard-linux-compat on them, so we need to depend on
!BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_6.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Actually the install target of some tools like the parser tries to do
an os detection to understand what install and where.
Incidentally, when the install is invoked on SuSE, this will trig a bug
in parallel install which manifests as "target/lib/apparmor: File exists"
error. For this problem, a patch is already sent upstream.
For buildroot instead, the os detection is useless so we disable it
and use a generic install method.
Fixes:
http://autobuild.buildroot.net/results/b18c6a9ce67065dcb7968c6f473b3b403d2925d2
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Latest version of Apache introduce a new apxs with a slightly modified
path handling logic. In order to simplify the crosscompilation, the
software removes the common prefix from bin install dir and build
install dir, but for this to work they both should have a common prefix.
So we introduce a new regexp to fix /usr/bin to staging dir, the regexps
are also fixed to replace only the exact path between double quotes, to
avoid replacing the she-bang line.
Fixes:
http://autobuild.buildroot.net/results/c41f31566974209897a3a1ec35afe2536fb248cchttp://autobuild.buildroot.net/results/b93f19976ce96e79ea159c25ed74a7377c78f334
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
[yann.morin.1998@free.fr:
- add the last few words about the she-bang blurb
- do not use quotes in the existing /sur/bin regexp
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Downloading from the cgit repo is now broken and it is a mirror of the
Gitlab repo so use the Gitlab repo.
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Latest bump introduced a regression for Nitrogen8MM, now fixed.
Changelog:
- Fix Nitrogen8MM SPL regression
- Add multi-rank lpddr4 training support
- Improve fastboot support
- Add Android AVB / BCB support
Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/517918160
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
NXP apparently changed file naming convention for this particular file.
Fixes: 1d0ea8d433 (package/freescale-imx/imx-gpu-g2d: bump to version 6.4.0.p1.0)
Signed-off-by: Timo Ketola <timo.ketola@exertus.fi>
Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit e69b8ddd43 bumped paho-mqtt-c to
version 1.3.2 but hash was wrong moreover licence has changed to EPL-2.0
since
1e91229cb6
So fix that and add LICENSE to the list of license files
Fixes:
- http://autobuild.buildroot.org/results/7ea1791778053613e9ef6b146dbd1992a0f63dc6
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
