Patch upstream so remove it.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
According to the pkg-config documents ("specification") when
sysroot-prefixing is enabled via PKG_CONFIG_SYSROOT_DIR this should only
be applied to -I/-L directories (includes, library directories), and not
to all of the other variables that can specify a directory.
However xorg uses mapdir/sdkdir in a similar fashion in what could be
considered an abuse of the spec, hence needs to be prefixed as well.
And what's more, it also uses includedir in a nonstandard fashion just
requesting the value via 'pkg-config --variable=includedir libfoo' which
doesn't pass the standard prefixing rules for the --cflags and --libs
invocation.
This patch makes pkgconf behave in the pkg-config specified way with the
added exception for the includedir, libdir, mapdir and sdkdir variables
which are prefixed.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Tested-by: Peter Seiderer <ps.report@gmx.net>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In the latest Linaro toolchain, the gdbserver has moved (surprise!)
and is now located side-by-side with the toolchain executables.
This commit adds this path as a new location where to search for a
gdbserver, and while at it wraps the line that has become too long in
the process.
[Thomas: rework commit log according to Yann's suggestion.]
Signed-off-by: Trent Piepho <tpiepho@kymetacorp.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove the integrator926_defconfig configuration, which has not been
updated since a very long time, and targets hardware that is quite
difficult, not to say impossible, to get.
While Qemu has an emulation for the Integrator CP platform, it doesn't
seem to emulate a hard drive, which makes it not very useful. In
addition, we already have the qemu_arm_versatile_defconfig for an
ARMv5 platform emulated in Qemu.
Therefore, let's get rid of this fairly old and never updated
defconfig.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This defconfig has not been updated since a long time, and it now
fails to build because the latest version of U-Boot has removed for
the Snowball because nobody converted it to the new U-Boot
standards. And our defconfig was not specifying an explicit U-Boot
version for it.
On the kernel side, the Git repository has not seen any commits since
3 years, and generally speaking, the Snowball project and the SoC it
is based on are no longer being developed.
Consequently, let's get rid of this defconfig altogether.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Adjust a generated udev rule file (25-gpsd.rules) to have user write
permissions. This is to prevent rebuild issues when the gpsd package
fails to re-install on a target (since the `cp` of the rule file will
fail due to permissions).
[Thomas: minor tweaks to code comments and commit title.]
Signed-off-by: James Knight <james.knight@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The following handles the GPSd SCons change for the explicit
configuration of the NMEA 0183 protocol. The protocol configuration
change was introduced in 3.12. Developer's who transitioned to
Buildroot's GPSd 3.15 had NMEA 0183 implicitly enabled by default. This
change allows NMEA 0183 to be explicitly disabled again.
See:
http://git.savannah.gnu.org/cgit/gpsd.git/commit/SConstruct?id=8f20d7b2d1ece8f3205ca038726c77daa5234c0c
Signed-off-by: James Knight <james.knight@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since libconfuse now has a proper release tar ball, this also adds a
hash, removes autogen, and removes a patch that is no longer needed.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
host-gauche currently fails to build if host-zlib was built before,
because it finds zlib.h, but due to issues in gauche's build system,
the LDFLAGS passed in the configure script (with -L
$(HOST_DIR)/usr/lib) are not passed all the way down to where -lz is
used, causing a build failure.
Since we don't need zlib support in host-gauche, we simply disable it
explicitly.
While we're at it, we make the optional dependency on zlib explicit
for the target variant of the gauche package.
Fixes:
http://autobuild.buildroot.org/results/426/4269c465312ddcc801289914fa29427798ef7783/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In the manual, add a note that packages can use $(FOO_PKGDIR) to get the
path to the directory containg the .mk and Config.in files, if they need
it to e.g. copy files from there, like startup scripts, systemd units or
any other resource.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Samuel Martin <s.martin49@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Packages built with automake use a `py-compile` helper to byte-compile
Python source files. This script uses the "py_compile" module from the
standard library. In turn, the compile() function in the "py_compile"
module invokes the cache_from_source() function provided by importlib.
This commit adds a new patch named "020-importlib-no-pep3147.patch"
that changes cache_from_source() and source_from_cache() in importlib
to get rid of the "__pycache__" directory.
This commit fixes the following import error in kmod when the module
is built for Python 3:
>>> from kmod import Kmod
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
ImportError: cannot import name 'Kmod'
Moreover, this commit removes two patches that are no longer necessary
since modifying cache_from_source() and source_from_cache() disables
PEP 3147 for the standard library and distutils / setuptools.
* 004-old-stdlib-cache.patch
* 016-distutils-no-pep3147.patch
Signed-off-by: Christophe Vu-Brugier <cvubrugier@fastmail.fm>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The i.MX6 SoloX SABRE board for smart devices is Freescale's reference design
board based on the heterogeneous ARM Cortex-A9 + Cortex-M4 i.MX6 SoloX
applications processor.
This defconfig is inspired from previous freescale_imx6*sabresd_defconfig, and
is based on Freescale "official" git repo on git.freescale.com and SW release
3.10.53_1.1.0_ga.
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Cc: Gary Bisson <bisson.gary@gmail.com>
Cc: Jérôme Pouiller <jezz@sysmic.org>
Cc: Gilles Talis <gilles.talis@gmail.com>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The following commit prevents the e2fsprogs package from inadvertently
removing its own binaries when a target includes BusyBox and is
targeting a usr-merged environment.
While an action has been added to cleanup BusyBox-provided (if any)
ext2-related tools when including e2fsprogs, the action will delete
desired e2fsprogs binaries in an already prepared usr-merged target.
Adjusting the cleanup to occur before installing e2fsprogs binaries so
that if a usr-merged target exists, it will first delete the previous
binaries (if any) followed by installing new binaries.
Signed-off-by: James Knight <james.knight@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is a new package for the fastd "Fast and Secure Tunneling Daemon"
which was developed for the Freifunk Gluon project in the first place.
It includes a patch to allow cross compiling with toolchains without
LTO support which fails with the unpatched version due to some ugly
cmake hacks in fastd v17, details in the patch.
[Thomas:
- Get rid of trailing spaces in Config.in
- Remove the BR2_PACKAGE_FASTD_OPENSSL, and simply rely on
BR2_PACKAGE_OPENSSL
- Remove -DWITH_CAPABILITIES=TRUE, since libcap support is anyway
mandatory.
- Use ON/OFF instead of TRUE/FALSE.]
Signed-off-by: Alexander Dahl <post@lespocky.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add a DAEMON_ARGS configuration variable in order to make it possible to
pass custom extra options to rngd. This environment variable must
defined in /etc/default/rngd if needed, like with the SysV init script.
This file does not have to be present if not needed.
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
Reviewed-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The PYTHON_WEB2PY_PERMISSIONS table was using the user and group names
instead of the uid and gid, causing makedevs to retrieve the uid and gid
from the host system.
Signed-off-by: Noé Rubinstein <nrubinstein@aldebaran.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This package is a small library used for the Freifunk Gluon project
and will be used by other upcoming packages.
Signed-off-by: Alexander Dahl <post@lespocky.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: remove dependency on libglib2, as it is not tested directly
by yad's configure script, and is anyway guaranteed to be available
since yad depends on gtk2 or gtk3, which both require libglib2.]
Signed-off-by: James Knight <james.knight@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gauche is an R7RS Scheme implementation developed to be a handy script
interpreter, which allows programmers and systemadministrators to write
small to large scripts for their daily chores. Quick startup, built-in
system interface, native multilingual support are some of its goals.
Signed-off-by: Hiroshi Kawashima <kei-k@ca2.so-net.ne.jp>
Reviewed-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Tested-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The official site is now back online.
Signed-off-by: Rodrigo Rebello <rprebello@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fix cross compilation by using curl-config script for target instead of the
one from host.
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
BR2_PACKAGE_CURL is currently used by the git package to find out if
libcurl is available. While indeed BR2_PACKAGE_CURL indicates that
libcurl is available, it is not the most appropriate option for this:
BR2_PACKAGE_LIBCURL is better. BR2_PACKAGE_LIBCURL indicates that
libcurl is available, while BR2_PACKAGE_CURL indicates that both
libcurl and the curl program are available. Only the former is needed
by Git.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, we touch our stamp files before we call the step hooks.
This means a step hook can not properly fail a step, since the stamp
file exists even if the hook exits in error, thus a subsequent 'make'
would not try to redo that step.
Fix that by calling the hooks before we touch the stamp files.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Cc: Peter Seiderer <ps.report@gmx.net>
Cc: Romain Naour <romain.naour@openwide.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
'haveged' is installed in /usr/sbin, not /usr/bin.
Signed-off-by: Steven Noonan <steven@uplinklabs.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As reported by Steven Noonan, the variable recently introduced in the
package infrastructure to exclude certain parts of an archive from
being extracted is <pkg>_EXCLUDES, not <pkg>_TAR_EXCLUDES. However,
the gcc code was incorrectly using <pkg>_TAR_EXCLUDES. This commit
fixes that.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reported-by: Steven Noonan <steven@uplinklabs.net>
Commit 23ffa7ec first extracts to the toolchain-external build
directory and then moves everything to $(HOST_DIR)/opt/ext-toolchain.
However, this is not idempotent, because moving directories over
existing ones doesn't always work, particularly if the target is on
another device.
Simply remove the destination contents before moving.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
gcc will refuse to build with both --with-mode=thumb and --with-fpu=vfp,
with error messages during ./configure, like:
checking for suffix of object files... configure: error: in `/home/ymor
in/dev/buildroot/O/build/host-gcc-initial-4.9.3/build/arm-buildroot-lin
ux-uclibcgnueabihf/libgcc':
configure: error: cannot compute suffix of object files: cannot compile
See `config.log' for more details.
And config.log informatively contains:
sorry, unimplemented: Thumb-1 hard-float VFP ABI
This is an error message that comes deep from gcc source files.
If gcc says it does not support VFP with Thumb1, then let's disable that
combination in our menuconfig.
Prefer VFP over Thumb1, i.e. hide Thumb1 when we're not soft-float.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
rpcgen is only used to generate headers needed for compilation.
Move it to noinst_PROGRAMS otherwise you may end up with a host-arch
binary in your target.
Signed-off-by: Phil Eichinger <phil@zankapfel.net>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Systemd v216+ includes a configure option to disable ldconfig.
Signed-off-by: Gabe Evans <gabe@hashrabbit.co>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Virtualizer Development Kit (VDK) Family for ARM Cortex Products
consists of a set of virtual prototypes that provide a virtualizer for
the ARM core variants. The VDK is a standalone package that runs on an
host computer.
[Thomas: drop the following options, which as noted by Arnout, are not
needed:
- BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM=y
- BR2_LINUX_KERNEL_IMAGE_TARGET_NAME="Image"
- BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y.]
Signed-off-by: Joao Pinto <jpinto@synopsys.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, we forcibly override BR2_EXTERNAL when building the manual,
so as to avoid referring to packages therein from the manual.
However, when generating the lists of packages, we limit ourselves to
scanning for packages in (Buildroot's) TOPDIR and never search in
BR2_EXTERNAL. So, we do not really need to override BR2_EXTERNAL when
generating the manual to achieve the same result.
Furthermore, we're only looking for packages that are defined in the
sub-menu "Target packages", and never anywhere else, and especially not
in the sub-menu "User-provided options".
Finally, we're soon to completely eliminate use of BR2_EXTERNAL in
Kconfig altogether, so that would no longer have any impact anyway.
So, just leave BR2_EXTERNAL alone when generating the manual.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Samuel Martin <s.martin49@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
distclean is supposed to return the current directory, whether in-tree
or out-of-tree, into pristine conditions, which means we should also
forget about any br2-external tree on distclean.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
One of the selling points for br2-external is to provide a mean to add
new packages. However, it is not supported that a package be defined by
Buildroot and then redefined in a br2-external tree.
This situation may occur without the user noticing or even willing to
redefine the package, for example:
- br2-external is first created against a version of Buildroot
- a package (missing in Buildroot) is added to that br2-external tree
- upstream Buildroot adds this package
- user updates to the new Buildroot
In this case, the result in undefined, and we can't make any guarantee
on the result (working or not).
Add a sanity check so that a package redefinition gets caught.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The backfin toolchains come in two archives.
We extract the first (main) archive using the generic extract commands,
while the second is extracted as a post-extract hook.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Reviewed-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
