Fixes CVE-2014-4617 (The do_uncompress function in g10/compress.c
allows context-dependent attackers to cause a denial of service
(infinite loop) via malformed compressed packets, as demonstrated by an
a3 01 5b ff byte sequence.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Issue and CVE req: http://seclists.org/oss-sec/2014/q3/261
Patch upstreamed in a subtly different way.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Otherwise it shows up indirectly when toolchain options aren't enough
and then vanishes when they are fulfilled.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Otherwise it shows up indirectly when toolchain options aren't enough
and then vanishes when they are fulfilled.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Otherwise it shows up indirectly when toolchain options aren't enough
and then vanishes when they are fulfilled.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Otherwise it shows up indirectly when toolchain options aren't enough
and then vanishes when they are fulfilled.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Otherwise it shows up indirectly when toolchain options aren't enough
and then vanishes when they are fulfilled.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Otherwise it shows up indirectly when toolchain options aren't enough
and then vanishes when they are fulfilled.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Otherwise it shows up indirectly when toolchain options aren't enough
and then vanishes when they are fulfilled.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Otherwise it shows up indirectly when toolchain options aren't enough
and then vanishes when they are fulfilled.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Otherwise it shows up indirectly when toolchain options aren't enough
and then vanishes when they are fulfilled.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Otherwise it shows up indirectly when toolchain options aren't enough
and then vanishes when they are fulfilled.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Otherwise it shows up indirectly when toolchain options aren't enough
and then vanishes when they are fulfilled.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Otherwise it shows up indirectly when toolchain options aren't enough
and then vanishes when they are fulfilled.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Otherwise it shows up indirectly when toolchain options aren't enough
and then vanishes when they are fulfilled.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Otherwise it shows up indirectly when toolchain options aren't enough
and then vanishes when they are fulfilled.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Otherwise it shows up indirectly when toolchain options aren't enough
and then vanishes when they are fulfilled.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Otherwise it shows up indirectly when toolchain options aren't enough
and then vanishes when they are fulfilled.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Otherwise it shows up indirectly when toolchain options aren't enough
and then vanishes when they are fulfilled.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Otherwise it shows up indirectly when toolchain options aren't enough
and then vanishes when they are fulfilled.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch converts the busybox package to the new kconfig-package
infrastructure, thus removing code duplication and ensuring a consistent
behavior of kconfig packages.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch converts the uclibc package to the new kconfig-package
infrastructure, thus removing code duplication and ensuring a consistent
behavior of kconfig packages.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
There are several packages that have a configuration file managed by
kconfig: uclibc, busybox, linux and barebox. All these packages need some
make targets to handle the kconfig specificities: creating a configuration
(menuconfig, ...) and saving it back (update-config, ...)
These targets should be the same for each of these packages, but
unfortunately they are not. Especially with respect to saving back the
configuration to the original config file, there are many differences.
A previous set of patches fixed these targets for the uclibc package.
This patch extracts these targets into a common kconfig-package
infrastructure, with the goals of:
- aligning the behavior of all kconfig-based packages
- removing code duplication
In order to use this infrastructure, a package should at a minimum specify
FOO_KCONFIG_FILE and eval the kconfig-package macro. The supported
configuration editors can be set with FOO_KCONFIG_EDITORS and defaults to
menuconfig only.
Additionally, a package can specify FOO_KCONFIG_OPT for extra options to
pass to the invocation of the kconfig editors, and FOO_KCONFIG_FIXUP_CMDS
for a list of shell commands used to fixup the .config file after a
configuration has been created/edited.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
[yann.morin.1998@free.fr: add missing 4th argument when calling to
inner-kconfig-package (namely, 'target']
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The uclibc-menuconfig command is currently run based on the user-specified
config file, while the fixup of the config file is done afterwards.
However, it makes more sense to do an initial fixup _before_ running
menuconfig, so that the options presented to the user are consistent with
the final configuration.
This patch changes the dependency of the menuconfig target from .config to
.stamp_config_fixup_done to achieve this.
Suggested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
If bluez_utils is around then add it to dependencies so as to use it,
but if it's not (for instance bluez5_utils is around) then disable it
since the bluez5 API isn't compatible. Fixes:
http://autobuild.buildroot.net/results/6ca/6caeb7f41ac5e14dbee49f87511af3351f6013f1/
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In order to select imx-vpu, packages must also select the
freescale-imx package, otherwise, kconfig prints some warnings.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes build error in elfutils
http://autobuild.buildroot.net/results/37f/37f87ad7ba087d42d0001f55305f7468c2a172b6/
eblwstrtab.c:(.text+0x43): undefined reference to `wmempcpy'
eblwstrtab.c:(.text+0x1ba): undefined reference to `wcslen'
eblwstrtab.c:(.text+0x2df): undefined reference to `wmemcmp'
because ltrace did not take into account that elfutils depends on
BR2_LARGEFILE & BR2_USE_WCHAR. This is also visible here:
wget http://autobuild.buildroot.net/results/37f/37f87ad7ba087d42d0001f55305f7468c2a172b6/defconfig
make defconfig BR2_DEFCONFIG=defconfig
warning: (BR2_PACKAGE_LTRACE) selects BR2_PACKAGE_ELFUTILS which has unmet direct
dependencies (BR2_LARGEFILE && BR2_USE_WCHAR && !BR2_avr32 && !BR2_bfin)
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thrift requires GCC built-in atomic functions which are architecture specific
and may not be implemented.
[Thomas: remove incorrect empty newline at end of Config.in.]
Signed-off-by: Anton Kolesov <Anton.Kolesov@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Libtorrent requires GCC built-in atomic functions which are architecture specific
and may not be implemented.
This fixes:
http://autobuild.buildroot.net/results/51414e22c8ea47c38df20d864526a370c5a895d7/
Signed-off-by: Anton Kolesov <Anton.Kolesov@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
ICU requires GCC built-in atomic functions which are architecture specific
and may not be implemented.
Signed-off-by: Anton Kolesov <Anton.Kolesov@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Jack requires GCC built-in atomic functions which are architecture specific
and may not be implemented.
This fixes:
http://autobuild.buildroot.net/results/c218be876d3abf7a8e212b6d526595bfd835e1c5/
Signed-off-by: Anton Kolesov <Anton.Kolesov@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
GCC has several builtin functions that implement atomic operations. Those
functions are architecture specific and may not be implemented by the
specific toolchain. In case of GCC for ARC those functions rely on
LLOCK/SCOND instructions which are optional in ARC CPU's. If ARC CPU doesn't
support those instructions but software tries to use them, then application
will be aborted with Illegal instruction exception. To avoid confusion user
should first specify that their CPU supports atomic extension, which will
allow selection of packages that use builtin atomic functions.
Signed-off-by: Anton Kolesov <Anton.Kolesov@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since openssh-6.0, the ssh-keygen app has supported a -A option,
which creates any missing keys. This frees us of having to add
new ssh-keygen invocations as new key types are introduced. This
also frees us of having to know the default key names and locations.
So this patch replaces all the the init.d script invocations with
a single "ssh-keygen -A" call.
Note: the systemd service script *already* uses this option.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 93917b6980 introduced the
installation of the binary .qm translation files, unconditionally.
This patch introduces an option to disable this behavior, saving
almost 8MB of space.
[Thomas: rename option to BR2_PACKAGE_QT_TRANSLATION_FILES instead of
BR2_PACKAGE_QT_INSTALL_TRANSLATION_FILES, and move its definition
around the installation of examples/demos rather than in the middle of
the options for the different modules.]
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- remove obsolete option --disable-vis
- add patch to fix compile error with uClibc
- add patch to fix compile error in freerdp
Compile-tested against all packages depending on ffmpeg using this defconfig:
BR2_TOOLCHAIN_EXTERNAL=y
BR2_PACKAGE_GSTREAMER=y
BR2_PACKAGE_GST_FFMPEG=y
BR2_PACKAGE_MPD=y
BR2_PACKAGE_MPD_FFMPEG=y
BR2_PACKAGE_XORG7=y
BR2_PACKAGE_FREERDP=y
BR2_PACKAGE_OPENCV=y
BR2_PACKAGE_OPENCV_WITH_FFMPEG=y
BR2_PACKAGE_MEDIASTREAMER=y
BR2_PACKAGE_MINIDLNA=y
VLC also compiled when the build of vlc-static is disabled in Makefiles,
otherwise this known error occurs:
http://autobuild.buildroot.net/results/022/022252176c051ff3365b2cb820f32aafc802803a/
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This version bump, amongst other things, introduces
OMX_ImageFilterDeInterlaceFast, which is needed by
the upcoming xbmc/kodi version bump.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This version bump introduces OMX_ImageFilterDeInterlaceFast,
which is needed by the upcoming xbmc/kodi version bump.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The gcc 4.9.x breakage is now handled by musl itself.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch adds Bluez 5.x. Its API is not backwards compatible with
BlueZ 4 so it is packaged separately from BlueZ 4.
BlueZ utils will use systemd and/or udev if enabled. It contains a
hook to install the GATT support tool, which is always built but not
installed by default.
[Thomas:
- Add dependency on 3.4 kernel headers
- Add options for OBEX support and client support, to make the
libical and readline dependencies optional.
- Rewrap Config.in help text.
- Adapt indentation in .mk file.
- Bump to version 5.21.
- Use BR2_PACKAGE_HAS_UDEV instead of BR2_PACKAGE_UDEV.]
Signed-off-by: Marcin Bis <marcin@bis.org.pl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In some situations, users may want to tweak the dynamic section of the
binaries (for example to add/set the RPATH to $ORIGIN/../lib).
Because it is not trivial to do it properly from the Buildroot
infrastructure, allow those users to use patchelf (e.g. from a
post-build script) to tweak binaries.
patchelf is able to:
- modify an existing DT_RUNPATH tags
- add a DT_RUNPATH tag if not already present
- do the above to the DT_RPATH tag, too
- set the path to the interpreter
- remove DT_NEEDED tags
- query a binary for the DT_RUNPATH/DT_RPATH tag, or for the
interpreter path
Does not really fix#7172, but this is an appropriate workaround.
[Thomas: change license to GPLv3+, as mentionned in the project's
README file.]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Mike Zick <minimod@morethan.org>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: minor reformatting like removing trailing whitespaces,
wrapping to a shorter length Config.in help texts, etc.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-lintl needs to be added at the end of the link command, Makefile
has variable LIBS for this purpose, so use it instead of LDFLAGS.
Fixes
http://autobuild.buildroot.net/results/276/276581f6dbbe330799c3a7eaa26b453e38a22907/
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since the trailing slash is stripped from $($(PKG)_SITE) by pkg-generic.mk:
$(call DOWNLOAD,$($(PKG)_SITE:/=)/$($(PKG)_SOURCE))
so it is redundant.
This patch removes it from $(PKG)_SITE variable for BR consistency.
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tarballs are now provided for libevdev, so use that instead of the Git
repository, as it allows to avoid autoreconf for the package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
In commit 79c31e3297 ("package/libevdev:
add dependency on host-python"), Yann added a dependency of libevdev
on host-python, because the Python script in evdev was using argparse
which is only available since Python 2.6. At the time, this was
causing failures on machines that were using Python versions older
than 2.6.
However, since Yann's patch, the libevdev version has been bumped. And
one of the upstream commit,
http://cgit.freedesktop.org/libevdev/commit/libevdev/?id=cea8f0b8cc86332b0643acd62f24f9fef2ecc153,
was precisely made to remove the argparse dependency to avoid the
need to have a >= 2.6 Python version.
Thanks to this, we can avoid the host-python dependency and rely on
the system-installed Python version instead.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Add a new config option that allows to specify a list of files
to dump symbols from, and generate a database of symbols, in
stagins/usr/share/google-breakpad/.
Signed-off-by: Pascal Huerst <pascal.huerst@gmail.com>
[yann.morin.1998@free.fr: add dependency on the host variant; fix
script; add commit log]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas: remove leftover debugging, rewrap Config.in help text,
propagate dependencies correctly.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Support for libcue has been removed for mpd since version 0.17.
Signed-off-by: Jörg Krause <jkrause@posteo.de>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The S10udev script is not installed or referenced, and eudev has its own
S10udev. So we can simply remove it.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Lots of bugfixes, enhancements to provisioning and printing support via
cups.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that we've got a cleaner/fuzzier libtool 1.5 static patch we can
discard the temporary workaround.
This reverts commit e573f5d326.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Apparently LIBS (environment) isn't pushed to LIBS (autoconf) for the
tests, hence when static linking openssl it misses libz and assumes some
basic digests required for ecdsa support are missing, which is false. Fixes:
http://autobuild.buildroot.net/results/204/20411901d1bc6811e1ef8fa39457257d6bf1a146/
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Generic infra packages might not use LDFLAGS at all so add -static for
static builds to CFLAGS and CXXFLAGS too.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Disable shared build for host-gcc-final when building for static targets.
We really want static or shared, there's no such thing as "preferring static"
since we can't choose with any degree of granularity for which packages.
And it confuses linking scripts having both available at the same time. Fixes:
http://autobuild.buildroot.net/results/c54/c54bdf88eff6d60c7001cb0e2cb6792cc75178db/
[Thomas: slightly amend the commit to factorize the installation of
static libraries.]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We were already removing the preloadable iconv library (that can be
used through LD_PRELOAD to override the C library iconv
implementation) from staging/target, but it was still built. And this
causes issues in static only scenarios, so this patch changes that to
not even build/install the preloadable library.
[Thomas: changed Gustavo's patch to take into the fact that we never
need the preloadable library.]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
If Binutils and/or GDB are fetched from the unified binutils-gdb
repository, then the tarball will contain both Binutils and GDB
sources, unlike the "normal" tarballs that contain only the titular
package. To keep packages separated in Buildroot we need to disable
undesired components when configuring.
Binutils and GDB migrated to a common Git repository in the October
2013 [1]. Previous Git repositories were incomplete copies of CVS
repository which copied only the relevant files (no binutils files in
GDB, and vice versa). In the new binutils-gdb repository there is no
such separation and a result all files exist in directory after
checkout. So if "configure" and "make" are used without explicit
targets, all projects will be built: binutils, ld, gas, bfd, opcodes,
gdb, etc. In case of Buildroot this would mean that selecting Binutils
only, still will build both Binutils and GDB. And if GDB is selected
as well, then both packages will be built two times, and Binutils from
GDB directory will overwrite initial build of Binutils (or vice versa
if Binutils will be built after the GDB). This is a serious problem,
because binutils and GDB use separate branches in this common
repository. In case of Buildroot this means that separate Git commits
(or tags) should be used when downloading source from Git.
This affects only Git repositories, because GNU release tarballs still
contain only relevant packages.
This change is backward compatible, because if "normal" tarball is
used (without extra directories), than --disable-* configure options
are just ignored by configure.
[1] https://sourceware.org/ml/gdb/2013-10/msg00071.html
[Thomas: use variables to factorize options, and add comments in the
relevant .mk files to explain what's going on.]
Signed-off-by: Anton Kolesov <Anton.Kolesov@synopsys.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Small bugfixes and improvements, and patches upstreamed.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes build failure reported here:
http://autobuild.buildroot.net/results/262/26218e028f3d2c77c5192b45154627f08384b688/
uClibc toolchain for ARC doesn't support PIE
Attempt to build anything with "-pie" option lead to linker failure:
arc-buildroot-linux-uclibc-gcc -pie test.c
ld: ../4.8-r3/bin/../arc-buildroot-linux-uclibc/sysroot/usr/lib/crt1.o: warning: unresolvable relocation against symbol `__uClibc_main' from .text section
ld: ../4.8-r3/bin/../lib/gcc/arc-buildroot-linux-uclibc/4.8.0/crtbegin.o: warning: unresolvable relocation against symbol `__deregister_frame_info@@GCC_3.0' from .text section
ld: ../4.8-r3/bin/../lib/gcc/arc-buildroot-linux-uclibc/4.8.0/crtbegin.o: warning: unresolvable relocation against symbol `__deregister_frame_info@@GCC_3.0' from .text section
ld: ../4.8-r3/bin/../lib/gcc/arc-buildroot-linux-uclibc/4.8.0/crtbegin.o: warning: unresolvable relocation against symbol `__register_frame_info@@GCC_3.0' from .text section
ld: ../4.8-r3/bin/../lib/gcc/arc-buildroot-linux-uclibc/4.8.0/crtbegin.o: warning: unresolvable relocation against symbol `__register_frame_info@@GCC_3.0' from .text section
In its turn this behavior confuses configure script of openssh so some options
get set improperly. In particular "strnvis" gets determined as existing which
causes failure during compilation:
log.c:67:25: error: 'VIS_SAFE' undeclared (first use in this function)
#define LOG_STDERR_VIS (VIS_SAFE|VIS_OCTAL)
With disabled PIE ("--without-pie") openssh gets built without issues.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Anton Kolesov <akolesov@synopsys.com>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When flex is built for the target without installing the
flex binary, a flex++ symlink installed by flex's Makefile
points to the missing flex executable. This mod adds
a post target install hook to remove the broken symlink.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
There is no real reason to run uclibc-menuconfig in non-parallel mode,
even though one can neither expect performance benefits from a parallel
menuconfig.
Nevertheless, $(MAKE) is the default, so this patch removes the unnecessary
non-default $(MAKE1) usage for uclibc-menuconfig.
This is a simplification introduced in preparation of the kconfig-package
infrastructure.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In the sequence:
make uclibc-menuconfig
make uclibc-update-config
the freshly configured settings from the menuconfig are lost during the
update-config step. This is because update-config depends on the configure
step, which starts by copying the config file to the build directory.
Instead, stop depending on the configure step from update-config, and
introduce a new stamp file .stamp_config_fixup_done, which applies any
fixups on the .config file.
An alternative solution would be to add a call to UCLIBC_FIXUP_DOT_CONFIG to
the relevant targets instead of depending on a new stamp file. The advantage
of the stamp file, though, is that we avoid redoing the fixup unnecessarily.
Moreover, in the light of the plan to extract the kconfig-specific bits into
a separate kconfig-package infrastructure, the stamp file rules are more
easily moved into such an infrastructure, while the alternative solution
requires the package .mk file to explicitly call the FIXUP rules which may
more easily be forgotten.
No longer depending on the configure step has the added bonus that
'uclibc-update-config' no longer needs the toolchain to be available, which
makes:
make clean uclibc-menuconfig uclibc-update-config
much faster and user-friendly.
Additionally, make sure that 'make clean uclibc-update-config' works
properly, by depending on .stamp_config_fixup_done so that the config file
is present and fixed.
Fixes bug #7154https://bugs.busybox.net/show_bug.cgi?id=7154
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When executing the sequence 'make clean uclibc-menuconfig', the configured
config file is not taken into account and one starts from the default
settings.
This patch adds an explicit target for the config file and lets the
configure and menuconfig steps depend on it, fixing the problem.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In a subsequent patch, the behavior of UCLIBC_SETUP_DOT_CONFIG will change
so that it only applies fixups to the (already copied) configuration file.
This patch renames this function to UCLIBC_FIXUP_DOT_CONFIG to better match
the future behavior.
Suggested-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
If libuClibc is not installed to staging on attempt to build tests following
errors happen:
============
TEST_LINK termios/ termios
.../host/usr/arc-buildroot-linux-uclibc/sysroot/usr/lib/crt1.o: In function `__start':
.../build/uclibc/libc/sysdeps/linux/arc/crt1.S:53: undefined reference to `__uClibc_main'
termios.o: In function `main':
.../build/uclibc/test/termios/termios.c:13: undefined reference to `printf'
.../build/uclibc/test/termios/termios.c:14: undefined reference to `printf'
.../build/uclibc/test/termios/termios.c:16: undefined reference to `stdout'
.../build/uclibc/test/termios/termios.c:16: undefined reference to `fileno'
.../build/uclibc/test/termios/termios.c:16: undefined reference to `ioctl'
.../build/uclibc/test/termios/termios.c:19: undefined reference to `perror'
.../build/uclibc/test/termios/termios.c:21: undefined reference to `printf'
.../host/usr/lib/gcc/arc-buildroot-linux-uclibc/4.8.0/../../../../arc-buildroot-linux-uclibc/lib/libgcc_s.so.1: undefined reference to `memcpy'
.../host/usr/lib/gcc/arc-buildroot-linux-uclibc/4.8.0/../../../../arc-buildroot-linux-uclibc/lib/libgcc_s.so.1: undefined reference to `malloc'
.../host/usr/lib/gcc/arc-buildroot-linux-uclibc/4.8.0/../../../../arc-buildroot-linux-uclibc/lib/libgcc_s.so.1: undefined reference to `abort'
.../host/usr/lib/gcc/arc-buildroot-linux-uclibc/4.8.0/../../../../arc-buildroot-linux-uclibc/lib/libgcc_s.so.1: undefined reference to `calloc'
.../host/usr/lib/gcc/arc-buildroot-linux-uclibc/4.8.0/../../../../arc-buildroot-linux-uclibc/lib/libgcc_s.so.1: undefined reference to `dl_iterate_phdr'
.../host/usr/lib/gcc/arc-buildroot-linux-uclibc/4.8.0/../../../../arc-buildroot-linux-uclibc/lib/libgcc_s.so.1: undefined reference to `realloc'
.../host/usr/lib/gcc/arc-buildroot-linux-uclibc/4.8.0/../../../../arc-buildroot-linux-uclibc/lib/libgcc_s.so.1: undefined reference to `memset'
.../host/usr/lib/gcc/arc-buildroot-linux-uclibc/4.8.0/../../../../arc-buildroot-linux-uclibc/lib/libgcc_s.so.1: undefined reference to `strlen'
.../host/usr/lib/gcc/arc-buildroot-linux-uclibc/4.8.0/../../../../arc-buildroot-linux-uclibc/lib/libgcc_s.so.1: undefined reference to `free'
collect2: error: ld returned 1 exit status
make[3]: *** [termios] Error 1
============
And the simplest solution is to build tests right before installation in
UCLIBC_INSTALL_TARGET_CMDS which follows UCLIBC_INSTALL_STAGING_CMDS so
all required libs are in place.
Interesting note - if one enables uClibc tests after initial full buildroot
build mentioned errors don't happen. This is because uClibc libc libs are
already installed to staging. That's why I didn't noticed this problem before.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Anton Kolesov <akolesov@synopsys.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- enable sna module by default
- optionally enable uxa module if DRI2 support is enabled
- add support for DRI3
- dependencies for DRI1/2/3 modules are provided by xserver_xorg-server,
therefore remove mesa3d dependency
- clean-up ums/kms options, configure picks sane defaults
- replace dependencies xproto_randrproto & xproto_renderproto with xlib_libXrandr
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Foreign Function Interface for Python calling C code.
[Thomas: add dependency on host-pkgconf and libffi, enable on Python 3
since the module builds fine and loads fine with Python 3 as well.]
Signed-off-by: oli vogt <oli.vogt.pub01@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add the math library directive '-lm' to linker options at the end.
The order of the math library directive '-lm' matters.
Fixes:
http://autobuild.buildroot.net/results/843/84382290696e72c23995f5ed020ad5c157817012/
Signed-off-by: Yuvaraj Patil <yuvaraj.patil@wipro.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
While updating the default config for Sparc, I noticed that networking
is broken. The reason is a uClibc backport patch from uClibc
master. This commit adds a fix on top of it, which was submitted to
upstream uClibc.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The current popt build system tests the existence of <glob.h>, and
then assumes that if __GLIBC__ is defined, then glob_pattern_p() must
be available. Unfortunately, that's not true with uClibc: <glob.h> may
be installed, but not necessarily the GNU glob extensions... and
uClibc defines __GLIBC__. This is causing build issues with certain
uClibc toolchains that do not have GNU glob extensions enabled.
To fix this, we introduce a patch called popt-03-glob-detection.patch
which adds a new AC_CHECK_FUNCS() test for glob_pattern_p() and uses
the result to know if this function is available, instead of testing
__GLIBC__.
In order for this patch to work, the popt package must be
autoreconfigured, so another patch, popt-02-fix-autoreconf.patch, is
needed to make the package autoreconfigure properly. And also
POPT_AUTORECONF = YES is added to popt.mk.
Finally, this change avoids the need for the Blackfin toolchain
specific testing, which we forgot to update when introducing the
2014R1 version of the Blackfin toolchain. With this new solution,
there will be no need to update the popt.mk file when new Blackfin
toolchains are added.
Fixes:
http://autobuild.buildroot.org/results/e09/e09e24fec240382a3197fef3e98eb9a22f76420a/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Yuvaraj Patil <yuvaraj.patil@wipro.com>
Cc: Sonic Zhang <sonic.zhang@analog.com>
This patch renames the popt patch popt-1.14_no-wchar.patch to
popt-01-no-wchar.patch in order to follow the naming convention used
in all packages.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit abded6bfea ("icu: add an option
to add a custom data library file") broke the build because of an
improper test on a non-qstripped variable. This commit fixes that.
Fixes:
http://autobuild.buildroot.org/results/02a/02a0800b01a4bf8734d601f79dc12663fe8f7542/
and many other similar occurences of the same issue.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The MIT license was in the original submission, but I had removed it
since I couldn't find where it was used. It is indeed used in
flup/server/paste_factory.py as noted by the original
submitter. Therefore, this commit adds the MIT license as one of the
licenses of python-flup.
Reported-by: Oli Vogt <oli.vogt.pub01@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
flickcurl does not specifically need openssl: it needs libcurl to have
crypto support to access https:// URLs. So, instead of depending on
openssl in FLICKCURL_DEPENDENCIES, this commit simply leaves it to the
Config.in file to select either OpenSSL, gnutls or libnss to make sure
libcurl will use one of these libraries.
Reported-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
ca-certificates is a runtime dependency only, so selecting it in the
Config.in file is sufficient, adding it to FLICKCURL_DEPENDENCIES is
not useful.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We need two patches from upstream git as flickr now requires https access.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[yann.morin.1998@free.fr: fix the kconfig recursive loop when selecting
a SSL implementation]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
openssl is more widely used than gnutls. Other packages prefer openssl
over gnutls and would like to do the select in the opposite direction.
So switch lftp to use openssl by default, and only revert to using
gnutls if explicitly selected by the user.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- use one single BR2_PACKAGE_ICU_CUSTOM_DATA_PATH string option
instead of a boolean option + a string option, which always causes
a lot of issues with random configurations that enable the boolean
option, but do not provide a valid value for the string option.
- enclose the definition of ICU_COPY_CUSTOM_DATA into the condition.]
Signed-off-by: Johan Derycke <johan.derycke@barco.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: fix commit title, use one line for both CONF_OPT options.]
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Certain packages need the headers/libraries from Postgresql to build
properly.
[Thomas: slightly reword the commit message.]
Signed-off-by: Nathaniel Roach <nroach44@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Enabling PCRE16 is not enough for Qt5. PCREUTF is also necessary, else
Qt5 may complain with this kind of (non fatal) message:
QRegularExpressionPrivate::doMatch(): called on an invalid QRegularExpression object
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
ltrace 0.7.3 is the latest release but it is actually broken on ARM
since PTRACE_SINGLESTEP emulation has been removed, see:
http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=425fc47adb5bb69f76285be77a09a3341a30799e
It fails with:
PTRACE_SINGLESTEP: Input/output error
Using master solves that until a new release is made.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: adjust license information to use SPDX code for Python
license, add GPLv2+ which is used for the tests, and fix the license
file variable.]
Signed-off-by: David Bachelart <david.bachelart@bbright.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This module is useful to implement a fastCGI webserver
Tested with ARM and Python 2.7.6
[Thomas: fix license informations.]
Signed-off-by: oli vogt <oli.vogt.pub01@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit makes the decimal module support optional: since Python
3.3 it relies on an external library. The source code of this library
is available built-in as part of the Python sources, but in Buildroot
we generally prefer to use the external library when possible.
To achieve this, this commit adds a patch to Python that is similar to
the one we use for expat support, but this time for the
libmpdec/mpdecimal library.
As a consequence, since mpdecimal now builds properly even when
<fenv.h> is not available (on i386), this commit fixes:
http://autobuild.buildroot.org/results/b64/b64d5c941a7cac00619da3a0696939f86a8eafc2/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
when we embed luajit on target,
we use luarocks with host-luajit instead of host-lua,
in order to use the same interpreter on the both side.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
host-luainterpreter is host-lua or host-luajit
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
the goal is to use host-luajit with pkg-luarocks
when luajit is on the selected luainterpreter for the target
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This package couldn't build using a toolchain with kernel headers >=
3.10 because of the use of VIDIOC_DBG_G_CHIP_IDENT. As stated in
videodev2.h, this ioctl should never be used.
Signed-off-by: Gary Bisson <bisson.gary@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes
http://autobuild.buildroot.net/results/04c/04cc4f4878466715d980442bd7114fecbeb51c0b/
Quote from README:
A shared library is now built by default, in addition to the static
library. You can also turn it off if desired
$ make SHARED=
The rtmpdump programs still link to the static library, regardless.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes
http://autobuild.buildroot.net/results/48a/48ad6d3659cf1f04581b7e3d115bebf454ff17fd/
To fix the error add "-lz" to LIBS variable and re-order the libraries in
configure.ac. Please note line 797 in configure.ac:
dnl XXX FIXME: use pkg-config if available!
Quote of the compile error:
configure: Enabling OpenSSL support in /home/br/br/output/host/usr/i486-buildroot-linux-uclibc/sysroot/usr.
checking for additional library dependencies of SSL... error
configure: error: cannot link with SSL - check config.log
In config.log multiple linking errors to libz can be found:
configure:10099: /home/br/br/output/host/usr/bin/i486-ctng-linux-uclibc-gcc -o
conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64
/home/br/br/output/host/usr/i486-buildroot-linux-uclibc/sysroot/usr/lib/libcrypto.a(c_zlib.o):
In function `zlib_stateful_c_zlib.c:(.text+0x56): undefined reference to `inflate'
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Same as similar patches for imx-vpu, the returned value from
IOGetVirtMem was not properly checked.
[Thomas: add upstream reference to the patch, suggested by Yann
E. Morin.]
Signed-off-by: Gary Bisson <bisson.gary@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As usual, uclinux is also linux. Also, -lpthread is needed to link the canusb
test.
Fixes:
http://autobuild.buildroot.net/results/3af/3af796bc0eaa8563f0fd1dfce090083482fa57b9/
[Thomas: fix typo in SoB line inside the newly added patch.]
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As noted by mnemoc on IRC the default busybox config doesn't enable
fdisk and util-linux is hidden by !BR2_PACKAGE_BUSYBOX_SHOW_OTHERS.
On modern systems fdisk usage is becoming more common so enable it, it
just adds up ~25 KiB to total binary size.
People who are on the edge for space savings will normally customize
their busybox config.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since version 215, systemd installs a service to execute /sbin/ldconfig
when the sysinit target is reached.
Unfortunately, /sbin/ldconfig is not installed on a target built using a
glibc-based toolchain.
As this service is not mandatory, it is now disabled, thus avoiding a
warning in the journal.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump systemd to version 215.
Also refresh the patch reverting the use of `ln --relative`.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As stated in the buildroot user manual add just a single space before
and after a '=' sign.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The option moves from `luarocks make` command to the LuaRocks config file.
This change and the merge of PR https://github.com/keplerproject/luarocks/pull/236
in LuaRocks 2.2.0 avoids the confusing message "Missing dependency"
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
this version includes a new default repository for rocks
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
