If target /etc/mpd.conf exists the evaluation will be fail thus breaking
the build process. Fix it.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libao output must be explicitly enabled, so fix it.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
New antenna configuration and wds peer commands.
New mesh functionality.
Misc fixes.
See http://www.spinics.net/lists/linux-wireless/msg64061.html
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump e2fsprogs to version 1.41.14
Also export libblkid properly for util-linux to use.
[Peter: install pkg-config files]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The uClibc configuration file toolchain/uClibc/uClibc.config-locale
does not exist anymore.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The FindQt4 module of CMake insists on having uic, even if the QtGui
module isn't part of the requirements to build the program. This isn't
correct, as Qt doesn't build/install the uic program when QtGui is
disabled (uic is used to generate some UI code).
This has been fixed upstream in
http://cmake.org/gitweb?p=cmake.git;a=commit;h=43cb9b8276a70d153d56a69d5c61daaf2bc51b78. This
commit will be part of the upcoming 2.8.4 CMake release, but in the
mean time, let's include it in Buildroot.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The Qt build system installs all host programs (uic, rcc, moc, qmake,
etc.) in the same base directory as the headers and libraries, but
that's not great for Buildroot.
So we now move the host programs and the mkspecs files to the
$(HOST_DIR), and create a qt.conf, which tells qmake where everything
is located.
Tested with Qmake and Cmake as build system for a simple Qt
application.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: add tidsp-binaries to _DEPENDENCIES]
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
We already pass the LD variable to openssl in order to use gcc as the
driver for the link process, instead of directly using the ld
linker. However, we were not passing LDFLAGS so that the compiler
flags are passed, which means that with multilib toolchains, the
incorrect library variant could be used at link time, leading to
invalid binaries (partly ARMv4, partly ARMv5) or broken compilation
(when the build took place in soft-float, but the link stage takes
place against hard-float libraries).
This fixes a problem reported on IRC by amo-ej1 when compiling ssh on
PowerPC e500v2 with a CodeSourcery toolchain ("crtbegin.o uses hard
float, sshd uses soft float").
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This requires removing "deprecated" markings from gdb-6.6, but this isn't
that big of a deal. That is the last version with Blackfin support at the
moment and we're in the process of getting mainlined.
[Peter: only mark as undeprecated on bfin]
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: don't allow MMU on bfin]
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The stripping options operate on the final image and not the intermediate
builds, so requiring stripping to be disabled just to enable debugging
options doesn't make much sense. Especially when working with gdbserver:
only the host needs the debugging information to be available. The board
can run & debug perfectly fine without it.
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Currently, the documentation says $(PKG)_SITE_METHOD should have upper
case names such as SVN or GIT, but the implementation only accepts lower
case svn or git. This fixes the documentation.
Signed-off-by: Bjørn Forsman <bjorn.forsman@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Daniel Nyström <daniel.nystrom@timeterminal.se>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
liboil is not needed not used any more. orc _can_ be used instead, but
it's not needed.
[Peter: get rid of liboil selects]
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Further more:
- Rename to S49ntp to match other packages
- Fix start target to run ntpd, and only try ntpdate if available
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#2935
Add ntpdate option and make ntpd optional.
Based on incomplete patch by Frederik Pasch <fpasch@googlemail.com>
Also enable crypto when openssl is enabled.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#3169
Typo in modules_lib_dirs section of patch specified modules_include_dirs
instead of modules_lib_dirs. This matters if PYTHON_MODULES_LIB
is not passed into the script.
Signed-off-by: Mark Wickham <markw@digi.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Quite a lot of packages select bzip2 (for its libbz2 library), so don't
hide it even though busybox DOES have a bzip2 applet - Otherwise
kconfig complains.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Now that it's been converted to cmaketargets it doesn't need the
host-cmake dependencies since this are fulfilled in the infrastructure.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Allow the user to define HOST_DIR in the config menu.
This way when building an internal toolchain a separate (maybe shared)
output directory may be defined and the toolchain can be used by
multiple users and/or projects.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
IDN support requires wchar, otherwise libintl will fail to build.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump libart to version 2.3.21 and update patch accordingly.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Kconfig nowadays uses the mainmenu as the title, so add the version info
here, similar to how it is done in the Linux kernel.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
